When starting J2EE server PE8 on Linux
When starting J2EE server PE8 on Linux Fedora Core 1, the following message is displayed:-
"Unable to read system environment. No system environment will be used."
1. Is there any side effect to the J2EE server PE8 performance or functionalities about this warning message?
2. Is there any way to avoid this issuea in case it does have side effect?
Regards,
William
I find libcliutil.so in $J2EE_HOME/lib and did the followings and got:-
#> ldd libcliutil.so
ldd: warning: you do not have execution permission for `./libcliutil.so'
libpthread.so.0 => /lib/tls/libpthread.so.0 (0x008ad000)
libdl.so.2 => /lib/libdl.so.2 (0x00782000)
libcrypt.so.1 => /lib/libcrypt.so.1 (0x00433000)
libresolv.so.2 => /lib/libresolv.so.2 (0x00913000)
libstdc++-libc6.2-2.so.3 => not found
libm.so.6 => /lib/tls/libm.so.6 (0x0075e000)
libc.so.6 => /lib/tls/libc.so.6 (0x00623000)
/lib/ld-linux.so.2 => /lib/ld-linux.so.2 (0x0060b000)
Can we infer that the warning message is displayed due to "libstdc++-libc6.2-2.so.3 => not found"?
Regards,
William
Similar Messages
-
When starting J2EE server .....
I have installed j2sdk 1.4 & j2sdkee1.3 on Windows XP. I have set Environment variables.
When I start j2ee server
COMMAN PROMPT SAYS
C:\>j2ee
Warning: This J2EE SDK release has only been tested on J2SE v1.3
J2EE server listen port: 1050
Redirecting the output and error streams to the following files:
c:\j2sdkee1.3\logs\home\j2ee\j2ee\system.out
c:\j2sdkee1.3\logs\home\j2ee\j2ee\system.err
Exception in thread "main"
C:\>
SYSTEM.ERR shows
Logging for J2EE Server Version: 1.3-b16 started at: Wed Apr 07 16:03:55 GMT+05:30 2004..
Using the Java HotSpot(TM) Client VM and the version number 1.4.0 from Sun Microsystems Inc..
VM is using the classpath: c:\j2sdkee1.3\lib\system\cloudscape.jar;c:\j2sdkee1.3\lib\system\tools.jar;c:\j2sdkee1.3\lib\cloudscape\RmiJdbc.jar;c:\j2sdkee1.3\lib\cloudscape\client.jar;c:\j2sdkee1.3\lib\classes;c:\j2sdkee1.3\classes;c:\j2sdkee1.3\lib\j2ee.jar;c:\j2sdkee1.3\lib\locale;c:\j2sdk1.4.0\jre\lib\rt.jar;c:\j2sdk1.4.0\lib\tools.jar;.;;c:\j2sdkee1.3\lib\jhall.jar .
J2EE Home Directory has been set to: c:\j2sdkee1.3.
java.lang.NoSuchMethodError: loadClass0
at com.sun.corba.ee.internal.util.JDKClassLoader.specialLoadClass(Native Method)
at com.sun.corba.ee.internal.util.JDKClassLoader.loadClass(JDKClassLoader.java:58)
at com.sun.corba.ee.internal.util.JDKBridge.loadClassM(JDKBridge.java:181)
at com.sun.corba.ee.internal.util.JDKBridge.loadClass(JDKBridge.java:84)
at com.sun.corba.ee.internal.javax.rmi.CORBA.Util.loadClass(Util.java:392)
at javax.rmi.CORBA.Util.loadClass(Util.java:233)
at javax.rmi.PortableRemoteObject.createDelegateIfSpecified(PortableRemoteObject.java:179)
at javax.rmi.PortableRemoteObject.<clinit>(PortableRemoteObject.java:58)
at com.sun.enterprise.server.J2EEServer.createActivationObjects(../../src/share/com/sun/enterprise/server/J2EEServer.java:397)
at com.sun.enterprise.server.J2EEServer.run(../../src/share/com/sun/enterprise/server/J2EEServer.java:227)
at com.sun.enterprise.server.J2EEServer.main(../../src/share/com/sun/enterprise/server/J2EEServer.java:901)
SYSTEM.OUT shows
Logging for J2EE Server Version: 1.3-b16 started at: Wed Apr 07 16:03:55 GMT+05:30 2004..
Using the Java HotSpot(TM) Client VM and the version number 1.4.0 from Sun Microsystems Inc..
VM is using the classpath: c:\j2sdkee1.3\lib\system\cloudscape.jar;c:\j2sdkee1.3\lib\system\tools.jar;c:\j2sdkee1.3\lib\cloudscape\RmiJdbc.jar;c:\j2sdkee1.3\lib\cloudscape\client.jar;c:\j2sdkee1.3\lib\classes;c:\j2sdkee1.3\classes;c:\j2sdkee1.3\lib\j2ee.jar;c:\j2sdkee1.3\lib\locale;c:\j2sdk1.4.0\jre\lib\rt.jar;c:\j2sdk1.4.0\lib\tools.jar;.;;c:\j2sdkee1.3\lib\jhall.jar .
J2EE Home Directory has been set to: c:\j2sdkee1.3.
Naming service started:1050
I tried changing the port number from 1050 to 10590 (as shown in Sun site) but didn't help. Same problem.
One more thing, can this problem be b'coz of "Warning: This J2EE SDK release has only been tested on J2SE v1.3" this starting line on start of server.
Can anyone tell me, y am I facing this problem and how to solve it. Other applications like deploytool, cloudscape r running fine. I didn't try others.
Looking for help as soon as possible
Thanks
TruptiYou may want to try and use J2SE 1.3 instead of J2SE 1.4. This may alleviate your issue.
-
Error when starting j2ee server, please help
JMS expert,
I am using j2sdkee1.3 with jdk1.3.1_01 over NT system. When I started JMS provider by "j2ee -verbose", I got an exception saying "TCP/IP ports(1050) in use by another process". Then I tried other port numbers like 1051 and 1061, the same error kept coming. What is the best port number I should use or whatelse I should do to solve this problem? Thanks.
C:\j2sdkee1.3\jms_execise>c:\j2sdkee1.3\bin\j2ee -verbose
J2EE server listen port: 1081
org.omg.CORBA.INTERNAL: minor code: 1398079697 completed: No
at com.sun.corba.ee.internal.iiop.GIOPImpl.createListener(GIOPImpl.java:256)
at com.sun.corba.ee.internal.iiop.GIOPImpl.getEndpoint(GIOPImpl.java:205)
at com.sun.corba.ee.internal.iiop.GIOPImpl.initEndpoints(GIOPImpl.java:140)
at com.sun.corba.ee.internal.POA.POAORB.getServerEndpoint(POAORB.java:488)
at com.sun.corba.ee.internal.POA.POAImpl.pre_initialize(POAImpl.java:154)
at com.sun.corba.ee.internal.POA.POAImpl.<init>(POAImpl.java:112)
at com.sun.corba.ee.internal.POA.POAORB.makeRootPOA(POAORB.java:110)
at com.sun.corba.ee.internal.POA.POAORB$1.evaluate(POAORB.java:128)
at com.sun.corba.ee.internal.core.Future.evaluate(Future.java:21)
at com.sun.corba.ee.internal.corba.ORB.resolveInitialReference(ORB.java:2421)
at com.sun.corba.ee.internal.corba.ORB.resolve_initial_references(ORB.java:2356)
at com.sun.enterprise.server.J2EEServer.run(J2EEServer.java:193)
at com.sun.enterprise.server.J2EEServer.main(J2EEServer.java:913)
java.lang.RuntimeException: Unable to create ORB. Possible causes include TCP/IP ports in use by another process
at com.sun.enterprise.server.J2EEServer.run(J2EEServer.java:203)
at com.sun.enterprise.server.J2EEServer.main(J2EEServer.java:913)
java.lang.RuntimeException: Unable to create ORB. Possible causes include TCP/IP ports in use by another process
at com.sun.enterprise.server.J2EEServer.run(J2EEServer.java:203)
at com.sun.enterprise.server.J2EEServer.main(J2EEServer.java:913)
java.lang.RuntimeException: Unable to create ORB. Possible causes include TCP/IP ports in use by another process
at com.sun.enterprise.server.J2EEServer.run(J2EEServer.java:350)
at com.sun.enterprise.server.J2EEServer.main(J2EEServer.java:913)
J2EE server reported the following error: Unable to create ORB. Possible causes include TCP/IP ports in use by another process
Error executing J2EE server ...
****************************************************************Hello.,
Did you get a resolution to this error ? I get the same error, odd thing is that i had it working for several days and now it won;t start ?
JMS expert,
I am using j2sdkee1.3 with jdk1.3.1_01 over NT system.
When I started JMS provider by "j2ee -verbose", I got
an exception saying "TCP/IP ports(1050) in use by
another process". Then I tried other port numbers like
1051 and 1061, the same error kept coming. What is
the best port number I should use or whatelse I should
do to solve this problem? Thanks.
C:\j2sdkee1.3\jms_execise>c:\j2sdkee1.3\bin\j2ee
-verbose
J2EE server listen port: 1081
org.omg.CORBA.INTERNAL: minor code: 1398079697
completed: No
at
at
at
t
com.sun.corba.ee.internal.iiop.GIOPImpl.createListener(
IOPImpl.java:256)
at
at
at
t
com.sun.corba.ee.internal.iiop.GIOPImpl.getEndpoint(GIO
Impl.java:205)
at
at
at
t
com.sun.corba.ee.internal.iiop.GIOPImpl.initEndpoints(G
OPImpl.java:140)
at
at
at
t
com.sun.corba.ee.internal.POA.POAORB.getServerEndpoint(
OAORB.java:488)
at
at
at
t
com.sun.corba.ee.internal.POA.POAImpl.pre_initialize(PO
Impl.java:154)
at
at
at
t
com.sun.corba.ee.internal.POA.POAImpl.<init>(POAImpl.ja
a:112)
at
at
at
t
com.sun.corba.ee.internal.POA.POAORB.makeRootPOA(POAORB
java:110)
at
at
at
t
com.sun.corba.ee.internal.POA.POAORB$1.evaluate(POAORB.
ava:128)
at
at
at
t
com.sun.corba.ee.internal.core.Future.evaluate(Future.j
va:21)
at
at
at
t
com.sun.corba.ee.internal.corba.ORB.resolveInitialRefer
nce(ORB.java:2421)
at
at
at
t
com.sun.corba.ee.internal.corba.ORB.resolve_initial_ref
rences(ORB.java:2356)
at
at
at
t
com.sun.enterprise.server.J2EEServer.run(J2EEServer.jav
:193)
at
at
at
t
com.sun.enterprise.server.J2EEServer.main(J2EEServer.ja
a:913)
java.lang.RuntimeException: Unable to create ORB.
Possible causes include TCP/IP ports in use by another
process
at
at
at
t
com.sun.enterprise.server.J2EEServer.run(J2EEServer.jav
:203)
at
at
at
t
com.sun.enterprise.server.J2EEServer.main(J2EEServer.ja
a:913)
java.lang.RuntimeException: Unable to create ORB.
Possible causes include TCP/IP ports in use by another
process
at
at
at
t
com.sun.enterprise.server.J2EEServer.run(J2EEServer.jav
:203)
at
at
at
t
com.sun.enterprise.server.J2EEServer.main(J2EEServer.ja
a:913)
java.lang.RuntimeException: Unable to create ORB.
Possible causes include TCP/IP ports in use by another
process
at
at
at
t
com.sun.enterprise.server.J2EEServer.run(J2EEServer.jav
:350)
at
at
at
t
com.sun.enterprise.server.J2EEServer.main(J2EEServer.ja
a:913)
J2EE server reported the following error: Unable to
create ORB. Possible causes include TCP/IP ports in
use by another process
Error executing J2EE server ... -
Error when starting J2EE server
I can't start my J2EE server, when I type "j2ee verbose" on windows console, it showed an error like this :
J2EE server listen port: 1050
Exception in thread "main" java.lang.NoClassDefFoundError: com/sun/corba/se/internal/util/IdentityHashtable
at com.sun.corba.ee.internal.javax.rmi.CORBA.Util.<clinit>(Util.java:87)
at com.sun.corba.ee.internal.POA.POAImpl.activate(POAImpl.java:935)
at com.sun.corba.ee.internal.POA.POAImpl.activate_object(POAImpl.java:895)
at com.sun.corba.ee.internal.CosNaming.TransientNameService.initialize(TransientNameService.java:117)
at com.sun.corba.ee.internal.CosNaming.TransientNameService.<init>(TransientNameService.java:70)
at com.sun.enterprise.iiop.POAProtocolMgr.initializeNaming(POAProtocolMgr.java:103)
at com.sun.enterprise.server.J2EEServer.run(J2EEServer.java:226)
at com.sun.enterprise.server.J2EEServer.main(J2EEServer.java:972)
I used J2EE 1.3.1 and JDK 1.5.0. I also have set an environment variable like shown below :
JAVA_HOME=C:\jdk1.5.0
J2EE_HOME=C:\j2sdkee1.3.1
PATH=%JAVA_HOME%\bin;%J2EE_HOME%\bin
CLASSPATH=%J2EE_HOME%\lib\j2ee.jar;%J2EE_HOME%\lib\locale
all that env. variable have been set in System Properties through control panel in my windows. Plz help me if there anything wrong with my setting or there are another problems that I didn't noticed before. Thank you.
Irfan R.Modify your JAVA_HOME to C:\Program%20%Files\j2sdk1.4.2_08
as spaces are not allowed. Most probably it will work.
I have installed J2EE SDK 1.3 on my machine. I have
set
J2EE_HOME=C:\j2sdkee1.3.1
JAVA_HOME=C:\Program Files\j2sdk1.4.2_08
and
PATH=C:\j2sdkee1.3.1\bin
CLASSPATH
=%J2EE_HOME%\lib\j2ee.jar;%J2EE_HOME%\lib\locale
environmental variables. All the four path seem to
OK. But when I'm trying to start application server
using j2ee -verbose command on my dos prompt I'm
getting following error
'C:\Program' is not recognized as an internal or
external command, operable program or batch file.
I tried j2ee -verbose command from C: prompt as well
as from C:\j2sdkee1.3.1\bin prompt in which j2ee
batch file is present.
Please help/guide on above issue -
NoClassDefFoundError when starting j2ee server
Hi,
I am trying to manage entity beans with JMX. I want to send Notifications from an entity bean to its corresonding mbean. I want to create the Notification object in my bean. My problem is that I can't import javax.management.Notification in my bean. When I start the j2ee server I get a NoClassDefFoundError exception.
How do I make the j2ee server find the javax.management package?
Regards
StefanSpecify the JAR, in which the class files for javax.management... , in the server classpath
-
Getting following error when starting J2EE server
Hi ,
The sap server fails to start with following error:
My DBSID is J2E
ctsaix02:j2eadm 17> vi /local/home/j2eadm/startj2eedb.log
"/local/home/j2eadm/startj2eedb.log" 37 lines, 1073 characters
Thu Dec 28 22:53:03 PAKST 2006
LOGFILE FOR STARTING DATABASE
Trying to start database ...
Thu Dec 28 22:53:03 PAKST 2006
Checking required environment variables
SAPSYSTEMNAME is >J2E<
Start database with xuserkey >c_J2EE<
Thu Dec 28 22:53:03 PAKST 2006
Connect to the database to check the database state
dbmcli: connect check finished with return code: 0
Database not available
Thu Dec 28 22:53:03 PAKST 2006
Starting XServer
12916 XSERVER Found other running x_server with version 'X64/AIX 7.5.0 Build 032-123-111-699'
12902 XSERVER started, 'already...'
Thu Dec 28 22:53:05 PAKST 2006
Starting database
Starting Database Instance...
Error! XUser not found!
Opening Database...
Error! XUser not found!
Thu Dec 28 22:53:05 PAKST 2006
Connect to the database to verify the database is now open
dbmcli check finished with return code: 0
Database start failed
~
What can be the problemManoj,
it looks like the USER data needed to connect to the instance hasn't been saved correctly. Please look at SAP note 39439 and save this data.
If you continue to have problems, you will need to open a CSS message.
Regards,
Ashwath -
Error at starting j2ee server (newbie)
Dear all,
I am not able to start j2ee server successfully. I keep getting the following error when I try to start the server by typing j2ee:
C:\Documents and Settings\ali>j2ee
J2EE server listen port: 1050
Redirecting the output and error streams to the following files:
C:\j2sdkee1.3.1\logs\nofear\j2ee\j2ee\system.out
C:\j2sdkee1.3.1\logs\nofear\j2ee\j2ee\system.err
Exception in thread "main"
I have j2sdkee1.3.1 and jdk1.3.0_05 installed in my laptop with the following settings:
User variable:
PATH=C:\jdk1.3.0_05\bin;C:\j2sdkee1.3.1\bin;C:\Program Files\Java\jre1.6.0_02\bin;C:\Program Files\Java\jdk1.6.0_02\bin; C:\j2sdkee1.3.1\bin;
CLASSPATH=.;C:\Program Files\Java\jre1.6.0_02\bin;C:\jdk1.3.0_05\bin;C:\j2sdkee1.3.1\bin;
System variable:
PATH=D:\MikTex\miktex\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\Program Files\Java\jdk1.6.0_02\bin;C:\PROGRA~1\CINDER~1\CINDER~2\Program;C:\Program Files\Java\jre1.6.0_02\bin;C:\PROGRA~1\ATT\Graphviz\bin\tools;C:\WINDOWS\system32\wbem;C:\Program Files\ImageConverter Plus;C:\Program Files\Samsung\Samsung PC Studio 3\;C:\Program Files\QuickTime\QTSystem\;C:\jdk1.3.0_05\bin;C:\j2sdkee1.3.1\bin;
CLASSPATH= .;C:\jdk1.3.0_05\bin;C:\Program Files\Java\jdk1.6.0_02\bin; C:\Program Files\Java\jre1.6.2_02\bin;C:\Program Files\Java\jdk1.6.0_02\bin;C:\Program Files\Java\jre1.6.0_05\lib\ext\QTJava.zip;C:\j2sdkee1.3.1\bin;C:\j2sdkee1.3.1;
Java_home= C:\jdk1.3.0_05
J2ee_home= C:\j2sdkee1.3.1
Could you please tell me why as I am not able to pass this stage without help?
Kind regards,
AlModify your JAVA_HOME to C:\Program%20%Files\j2sdk1.4.2_08
as spaces are not allowed. Most probably it will work.
I have installed J2EE SDK 1.3 on my machine. I have
set
J2EE_HOME=C:\j2sdkee1.3.1
JAVA_HOME=C:\Program Files\j2sdk1.4.2_08
and
PATH=C:\j2sdkee1.3.1\bin
CLASSPATH
=%J2EE_HOME%\lib\j2ee.jar;%J2EE_HOME%\lib\locale
environmental variables. All the four path seem to
OK. But when I'm trying to start application server
using j2ee -verbose command on my dos prompt I'm
getting following error
'C:\Program' is not recognized as an internal or
external command, operable program or batch file.
I tried j2ee -verbose command from C: prompt as well
as from C:\j2sdkee1.3.1\bin prompt in which j2ee
batch file is present.
Please help/guide on above issue -
Can't start J2ee server using j2sdkee1.3.1
When i try to start j2ee server , it shows the following
Error message.
Exception in thread "main" java.lang.NoClassDefFoundError: javax/naming/Context
at com.sun.enterprise.server.J2EEServer.<clinit>(J2EEServer.java:53)
I have set all environment variables as follows
set path=.;c:\jdk1.2.2\bin;c:\j2sdkee1.3.1\bin;
set classpath=.c:\jdk1.2.2\lib;c:\j2sdkee1.3.1\lib\j2ee.jar
set JAVA_HOME=c:\jdk1.2.2
set J2EE_HOME=c:\j2sdkee1.3.
pls kindly give a solution.Try rather using the 1.4 version available here: http://java.sun.com/j2ee/1.4/
and use this dedicated forum: http://forum.java.sun.com/forum.jsp?forum=136
-Alexis -
I installed J2EE on Windows NT. I am getting the following exceptions when I started J2EE Server....
1. java.lang.NullPointerException at com.sun.enterprise.server.J2EEServer.....
2. RuntimeException: Unable to create ORB. Possible causes include TCP/IP ports in use by another process....
I tried to change the port no. from the default 1050 to 10500, but it didn't help.
Any suggestions please?Since u r getting the TCP/IP port already in use error, u probably have some other service/server running on that port.Try the following steps:
1) Start menu >> Control Panel >> Services
2) See which services are running presently. In case u have any web server,Appln. server running. , stop them and then start J2EE again.
But, I still think u r missing something in the classpath. -
Error message while starting J2EE Server!
Hi!
I get this error message when i try to start J2EE server:
c:\j2ee -verbose
Exception in thread "main" java.lang.NoSuchMethodError
at com.sun.corba.ee.internal.corba.AnyImpl.createTypeCodeForClass(AnyImp
l.java:1256)
at com.sun.corba.ee.internal.iiop.ShutdownUtilDelegate.createTypeCode(Sh
utdownUtilDelegate.java:223)
at com.sun.corba.ee.internal.iiop.ShutdownUtilDelegate.writeAny(Shutdown
UtilDelegate.java:178)
at javax.rmi.CORBA.Util.writeAny(Util.java:80)
at org.omg.stub.com.sun.enterprise.naming._SerialContextProvider_Stub.re
bind(Unknown Source)
at com.sun.enterprise.naming.SerialContext.rebind(SerialContext.java:188
at com.sun.enterprise.naming.SerialContext.rebind(SerialContext.java:202
at javax.naming.InitialContext.rebind(InitialContext.java:370)
at com.sun.enterprise.naming.NamingManagerImpl.publishObject(NamingManag
erImpl.java:192)
at com.sun.enterprise.naming.NamingManagerImpl.publishObject(NamingManag
erImpl.java:149)
at com.sun.enterprise.server.J2EEServer.bindObject(J2EEServer.java:718)
at com.sun.enterprise.server.J2EEServer.createServerObject(J2EEServer.ja
va:473)
at com.sun.enterprise.server.J2EEServer.run(J2EEServer.java:244)
at com.sun.enterprise.server.J2EEServer.main(J2EEServer.java:972)
Can someone tell me why?
ThanksYou need jsdk 1.3.1_03 or above to run j2ee 1.3.1 Any other version will give you this error.
-
Cannot start J2EE server on Windows 2000 server
Hi..
I installed J2EE 1.3(beta) along with J2SE1.3 that comes with the Java Jump start CDs.
The installation process went fine...I configured the environment variables but when I try to start the J2EE server from command prompt I get the following error.
E:\>j2ee -verbose
Exception in thread "main" java.lang.NoClassDefFoundError: javax/naming/Context at com.sun.enterprise.server.J2EEServer.<clinit>(J2EEServer.java:59)
The same error is encountered with other switches(stop, version etc.) of j2ee.
There is no conflict of port numbers. Can anyone please guide me properly what I have done wrong in the installation process?
ThanksWell...I removed the CLASSPATH variable all together and reinstalled J2SE 1.3 again(refreshed all the environment variables) and then started j2ee server....and it worked this time...
Thanks alot... -
Security Error when starting the server - WPLS 7.0
Security Error when starting the server - WPLS 7.0
what may be the reason ...
console :
BUILD SUCCESSFUL
Total time: 3 seconds
Starting WebLogic Server...
<May 30, 2005 4:22:15 PM IST> <Notice> <Management> <140005> <Loading configuration C:\cpDomain\.\config.xml>
<May 30, 2005 4:22:18 PM IST> <Info> <Logging> <000000> <FileLogger Opened at C:\cpDomain\portalServer\weblogi
c.portalServer.log>
<May 30, 2005 4:22:21 PM IST> <Info> <Security> <090516> <The RoleMapper provider has preexisting LDAP data.>
<May 30, 2005 4:22:21 PM IST> <Info> <Security> <090516> <The Authorizer provider has preexisting LDAP data.>
<May 30, 2005 4:22:21 PM IST> <Info> <Security> <090143> <The weblogic keystore provider DefaultKeyStore in re
alm cprealm cannot be used for private keys because its configured private key keystore file wlDefaultKeyStore
.jks does not exist.>
<May 30, 2005 4:22:21 PM IST> <Info> <Security> <090142> <The weblogic keystore provider DefaultKeyStore in re
alm cprealm cannot be used for trusted (root) CAs because its trusted (root) CA keystore was not configured.>
<May 30, 2005 4:22:21 PM IST> <Notice> <Security> <090082> <Security initializing using realm cprealm.>
<May 30, 2005 4:22:21 PM IST> <Critical> <WebLogicServer> <000364> <Server failed during initialization. Excep
tion:java.lang.SecurityException: Authentication for user weblogic denied
java.lang.SecurityException: Authentication for user weblogic denied
at weblogic.security.service.SecurityServiceManagerDelegateImpl.doBootAuthorization(SecurityServiceMan
agerDelegateImpl.java:411)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initialize(SecurityServiceManagerDeleg
ateImpl.java:539)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:917)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:723)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
>
<May 30, 2005 4:22:21 PM IST> <Emergency> <WebLogicServer> <000342> <Unable to initialize the server: Fatal in
itialization exception
Throwable: java.lang.SecurityException: Authentication for user weblogic denied
java.lang.SecurityException: Authentication for user weblogic denied
at weblogic.security.service.SecurityServiceManagerDelegateImpl.doBootAuthorization(SecurityServiceMan
agerDelegateImpl.java:411)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initialize(SecurityServiceManagerDeleg
ateImpl.java:539)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:917)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:723)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
>
The WebLogic Server did not start up properly.
Exception raised:
java.lang.SecurityException: Authentication for user weblogic denied
at weblogic.security.service.SecurityServiceManagerDelegateImpl.doBootAuthorization(SecurityServiceMan
agerDelegateImpl.java:411)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initialize(SecurityServiceManagerDeleg
ateImpl.java:539)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:917)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:723)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
Reason: Fatal initialization exception
Throwable: java.lang.SecurityException: Authentication for user weblogic denied
java.lang.SecurityException: Authentication for user weblogic denied
at weblogic.security.service.SecurityServiceManagerDelegateImpl.doBootAuthorization(SecurityServiceMan
agerDelegateImpl.java:411)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initialize(SecurityServiceManagerDeleg
ateImpl.java:539)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:917)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:723)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
C:\cpDomain\bin>
Thanks
Thanks & Regards,
Siva VP,
[email protected]Looks like you cannot connect to LDAP. Are you configured correctly?
-
How to avoid JMS validation when starting weblogic server
Hi All,
When starting up WebLogic server, it will validate JMS destinations one by one for deployed applications.
If I don't connect the VPN, then these JMS destinations are not reachable, and WebLogic Server will spend a lot of time to try connecting to these JMS destinations.
Thus it will take a lot of time to startup the WebLogic Server.
How can I disable JMS validation when starting weblogic server?
Thanks and Regards!Hi Daniel,
By blank do you mean that the screen is black? Is it gray? Is it blue? The word "blank" is vague when trying to determine and isolate startup issues. -
"Not an executable or is a link" errors when starting Messaging Server
"Not an executable or is a link" errors when starting Messaging Server
<P>
If Calendar Server 3.x has been installed to the same server root
as Messaging server, it is possible that the command 'NscpMail start'
to restart the server will return a string of errors:
# /etc/NscpMail start
19971207145610:Dispatch:Notification:Local Module
(Account-Handler) is not a n executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Account-Manager) is not a n executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(AutoReply-Handler) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Configuration-Manager) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Error-Handler) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Mailbox-Deliver) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Program-Deliver) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(SMTP-Deliver) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(SMTP-Router) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(UNIX-Deliver) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Network Module
(Finger-Server) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Network Module
(IMAP4-Server) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Network Module
(POP3-Server) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Network Module
(SMTP-Accept) is not an executable or is a link.
Module not loaded.
Startup Problem:
Module Error-Handler is required for proper operation.
Netscape Messaging Server Exiting!
The Calendar server 3.x installation may have changed the permissions
on [server-root]/bin directory from 755 to 750. Simply issue the
command (as root) 'chmod 755 [server-root]/bin' and then start
the server with the 'NscpMail start' command, and it should start
without a problem."Not an executable or is a link" errors when starting Messaging Server
<P>
If Calendar Server 3.x has been installed to the same server root
as Messaging server, it is possible that the command 'NscpMail start'
to restart the server will return a string of errors:
# /etc/NscpMail start
19971207145610:Dispatch:Notification:Local Module
(Account-Handler) is not a n executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Account-Manager) is not a n executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(AutoReply-Handler) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Configuration-Manager) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Error-Handler) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Mailbox-Deliver) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Program-Deliver) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(SMTP-Deliver) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(SMTP-Router) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(UNIX-Deliver) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Network Module
(Finger-Server) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Network Module
(IMAP4-Server) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Network Module
(POP3-Server) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Network Module
(SMTP-Accept) is not an executable or is a link.
Module not loaded.
Startup Problem:
Module Error-Handler is required for proper operation.
Netscape Messaging Server Exiting!
The Calendar server 3.x installation may have changed the permissions
on [server-root]/bin directory from 755 to 750. Simply issue the
command (as root) 'chmod 755 [server-root]/bin' and then start
the server with the 'NscpMail start' command, and it should start
without a problem. -
"Local Module is not an executable or is a link" when starting Messaging Server
"Local Module is not an executable or is a link" when starting Messaging Server
<P>
If you see error messages like this one when you try to start Netscape
Messaging Server:<P>
19971009095543:Dispatch:Notification:Local Module (Account-Handler) is
not an executable or is a link.
Module not loaded.
Startup Problem:
Module Error-Handler is required for proper operation.
Netscape Messaging Server Exiting!
You may have a file permissions problem. This can happen if you change
the Unix account that Messaging Server runs as. Try changing the
permissions on the "bin" directory in your Netscape server root to make
sure that the current Messaging Server user account has access to it
(try granting public read and execute permissions to that directory);
this should solve the problem.<P>BombingParadise wrote:
Found out I need the latest version. I try downloading the latest version before and it keeps giving me this error saying I need to retry later. I restart my computer and try it again but I'm still getting the error >:\No you don't, Minecraft is built for Java 6.
Amazing how you can do something as difficult as mod a game not yet built to be modded and yet not even know the basics of the basics of the command prompt, nor have the capacity to research it apparently.
Maybe you are looking for
-
How do I import one xml file into 3 separate tables in db?
I need to utilize xslt to import one xml file into 3 separate tables: account, accountAddress, streetAddress *Notice the missing values in middleName, accountType sample xml <account> <firstName>Joe</firstName> <middleName></middleName> <lastName>Tor
-
Should I get Windows 7 or 8 for my Macbook Pro 13" early 2011
Hey All, I was just wondering if anyone could give me some advice what which version of Windows I should get. My plan is that I wanted to learn some beginning program stuff that might (in the future) progress into more advanced computer programming.
-
Software Update crashes? What to do?
I am currently running OS X 10.6.7 on my 2.16GHz Intel Core 2 Duo iMac. After my Hard Drive failed recently , I had a new 1TB Samsung HD installed. I initialised the new drive and backed up via Time Machine. In general all now seems to be okay. (Alth
-
Sony ICD-PX333D won't recognize micro SD cards
Bought the recorder almost two months ago but it never could recognize a micro SD card. I have tried different brands and capacities but nothing worked. I have been talking to Sony suppor for a month now but they provided no real solution. I foll
-
Hi, We have 0FISCVARNT hardcoded with K4 in the update rules as of 3.0b and the queries based on this version with OFISCVARNT again restricted by K4 in the query. The queries were running correctly without any error message in 3.0b. However, after th