When starting up iPhone 4S, searching for service for 2 mins

When I reboot or start up my iPhone 4S. It says searching, for about 2 mins then AT&T 3G comes on after the LONG wait. ANyone else experiencing this?

Hi, I'm in the UK and have been experiencing the same issue. My iPhone 4 connects near enough instantly but my iPhone 4S seems to take forever. Let's hope Apple resolve this issue in the next update. I was about to send my phone back until I found this thread, at least now I know it's not just me it's an issue for

Similar Messages

I can`t set up iCloud on my mac mini although I have been paying iyogi for service for 6 months. ough

I am unable to set up my iCloud on my Mac mini although i have been
paying iyoug for service for the last six months.

"Iyogi" is a scam. What happens when you try to set up iCloud?

I recently took my 27 in i mac to peach mac for service for a flashing green screen. They said it was not a hardware issue but a software issue and want to charge me 99.00 to re-install it. WiIll mac come out with a patch for OS x for this?

I recently took my 27 in I Mac to Peach Mac for service for a flashing green screen. It comes up when I log in. They said it was not a hardware issue but a software issue and want to charge me 99.00 to re-install it. WiIll mac come out with a patch for OS x for this? Is this worth it?

Having a similar issue with my MacBook Pro w/Retina 2012.
I did the reinstall my self and incrementally did the updates by downloading them from Apple's website instead of using the App Store.
I found that the problem occured after updating to OS X 10.9.3.
The issue is in a 4k resolution update for mirroring displays. Not that you should be doing that from an iMac but your packaged update may have been similar even though the update was meant for 2013 MacBook Pro's.
You can try reseting the Nvram chip during boot up by pressing "Option + P + R" keys. You may have to do this after entering your password to log in if you have that set up on your computer. However this only works on certain models of Mac hardware and may not do anything at all.
After you get your second opinion from Apple, if they again confirm it's a software issue, then you should reinstall OS X Mavericks and download updates from the website instead of the app store. This way you control your updates. You will find the OS X 10.9.2 update as well as a seperate security update prior to the released update of the dreaded OS X 10.9.3
Again if you don't want the issue to occur again, then hold off on updating to OS X 10.9.3, but be cautioned that you do so at the risk of leaving your computer less secured even though it will seem to run better.

Processing History for Services for Object

Hello Together,
I created documents attachment in CJ20N Transaction code using the button "services for the object ," for one WBS Element. Some one have deleted some documents from the list, I did not see who deleted this, it there a processing history. Please advise the steps to see the processing history for services for object.
Regards
Rahul Tyagi

I tried to replicate scenario with tick on change doc. in proejct profile but system is not writing cahgne log in CN60. I understand this writing history for service for object is not wirting chagne log.
WIth Regards
Nitin P.

Error when starting SAP Business One Integration Server Service

Hi all,
I have a very urgent problem when installing B1iSN:
I'm installing B1iSN2007 for a customer (Windows server2008R2, SBO 8.8.1),
and at the beginning of the installation, after instaling the technology, I have an error,
The Tomcat server can't start.
I get the following error:
Windows could not start the SAP Business One Integartion service on Local Computer. For more Information, review the system
event Log.If this is a non-Microsoft service, contact the service vendor, and refer to service-specific error code 0.
In the event viewer I didn't find any more details.
In the tomcat logs (Under SAP Business One Integration\B1iServer\tomcat\logs) I find this:
[2012-01-05 15:12:26] [info] Procrun (2.0.4.0) started
[2012-01-05 15:12:26] [info] Service Tomcat5 name SAP Business One Integration Service
[2012-01-05 15:12:26] [info] Service Tomcat5 installed
[2012-01-05 15:12:26] [info] Procrun finished.
[2012-01-05 15:12:26] [174 javajni.c] [error] The specified module could not be found.
[2012-01-05 15:12:26] [994 prunsrv.c] [error] Failed creating java ..\..\..\jdk1.5.0_xx_sap\jre\bin\server\jvm.dll
[2012-01-05 15:12:26] [1269 prunsrv.c] [error] ServiceStart returned 1
[2012-01-05 15:13:13] [174 javajni.c] [error] The specified module could not be found.
[2012-01-05 15:13:13] [994 prunsrv.c] [error] Failed creating java ..\..\..\jdk1.5.0_xx_sap\jre\bin\server\jvm.dll
[2012-01-05 15:13:13] [1269 prunsrv.c] [error] ServiceStart returned 1
[2012-01-05 15:15:27] [174 javajni.c] [error] The specified module could not be found.
[2012-01-05 15:15:27] [994 prunsrv.c] [error] Failed creating java ..\..\..\jdk1.5.0_xx_sap\jre\bin\server\jvm.dll
[2012-01-05 15:15:27] [1269 prunsrv.c] [error] ServiceStart returned 1
What is the problem? How can I fix it?
Thanks a lot
Chana

Hi Trinidad,
Thanks for your help!!!
1.
I didn't install EventSender and DIProxy yet, I tried first to upload and deploy the zip files, but I couldn't open the Itegration Application Explorer.
2.
The jvm.dll file is in in the folder pointed by the logs: C:\Program Files (x86)\SAP\SAP Business One Integration\jdk1.5.0_xx_sap\jre\bin\server
and it is also in C:\Program Files (x86)\SAP\SAP Business One Integration\jdk1.5.0_xx_sap_64\jre\bin\server
I tried running the file java5w.exe, but I got an error message:
Access is denied
Unable to open the service tomcat5
Thne I managed to open it by "rua as administrator".
the Java Virtual Machine path is points to the java 1.5 version folder.
Is it possible that the reason that the service can't start is related to administrator rigts??
In the properties in the Integration Service (services.msc):
It is set to be run with the local system account.
all other properties looks fine.
in the properties of the tomcat5.exe (and tomcat5w.exe , I tried both)
In the Compatibility tab I tried setting the flag "Run this program in compatibility mode for" to Vista, windows 7, and server 2008
I didn't have the option of Windows XP.
I have also set the Privilege level of: "Run this program as administrator" to true.
But still the service won't start.
What can be the problem?
What else can I check?
Thanks a lot,
Chana

Error when starting SAP J2EE Engine Log Viewer Service

Hi,
I'm running SAP EP6 SP14.
I need to make the default trace log file on the WAS Server (Windows) available to the developer's. For this goal, I am attempting to install and start the SAP J2EE Engine LogViewer Service on the WAS. I think I have configured the service.ini file appropropriately. When I register the service, I get a successful message that the service has been registed. The service even shows up in the Windows Service Manager.
However, when I attempt to start the service, the process fails after a 4-minute attempt. I eventually get an error popup saying
"Could not start the SAP J2EE Engine Logviewer service on the Local Computer"
"Error 1053: The service did not respond to the start or control request in a timely fashion".
The service shows as "starting" until I reboot the WAS.
The logviewer.bat runs fine on the WAS itself.
I can also connect from the client to the WAS thru the J2EE connection, but that requires the admin password. I'd rather get this approach to work.
Regards,
Kevin

Hi,
I have the same error during starting the service. How did you resolve that error?
Regards
Sabine

Error 1053 when starting the Routing And Remote Access service

Hi all,
When I tried to start the "Routing And Remote Access" service on Windows 8.1 I got an error message as follow.
Could some one help me please.
Than's.

Hi MRAB,
Please check if all dependences are enabled first.
Then set the start type to Automatic.
Does this issue still occur after a restart?
Alex Zhao
TechNet Community Support

Http: 404 when starting 'manage user data' in EBP/SRM for the firs time.

We are customizing SRM 3.0 EBP 4.0 with SAPKU40005.
When we tried to create the first users we started to receive the following error 'http: 404 Page not Found' when starting 'manage user data'. (URL: http://[server]/sap/bc/bsp/bbpusermaint/!?client=400&language=EN&~logingroup=SPACE&addSession=1&parentBbpSession=SRP:[server]:0000.0005.d5ffd7b2.d87e
I've created the ADMIN user in the SU01 transaction. When logon in mySRM browser with this or any administrator user and try to 'manage user data' i get this error.
I've looked in the '(...)inetpub\wwwroot\sap' directory and didn't found any 'bc/bsp/...' directory.
Can someone please give me an hint ....
Tanks

Hello Carlos,
the BSP Framework you are now in has nothing to do with the ITS stuff like inetpub or wwwroot.
Get the docu for Web AS 6.20 and have a look into transaction SICF. There you can activate your application: follow the path sap/bc/bsp/bbpusermaint, right mouse click on the "node" and say activate.
This maybe solves your problem. But read a little bit of the doco on Internet Communication Framework (TX SICF) first.
Regards, Bernd

JMS resource not located when starting Weblogic 8.1 as windows service

I have a Weblogic 8.1 cluster which I am trying to configure as a Windows service.
          The managed servers startup up without errors when started from the command line, but when I start it up as a service they do not seem to find the JMSConnectionFactory that has been configured.
          Any ideas on what I am missing ?
          Malini

Can you post the error message? Are your custom connection factories targeted to the cluster?

Recently my iPhone 5 cannot get service for some reason is this a simple update fix or will I have to go in the apple shop to get repaired??

About a week ago my iPhone 5 just lost service and simply says no service I turned the phone off back on and no change is this a update fix or will Apple have to repair it ??

First, go through this:
http://support.apple.com/kb/ts4429
If nothing helps, then make an appointment at any Apple store.

Core window for Service for Dsktop Apps

After latest update to Creative Cloud, the following window is displayed after start-up:
I can kill in Task Manager. When I do, services pop-up displays Stopping Service for Desktop Apps. Followed immediately with Starting Service for Desktop Apps. The Core Window does not display this time. Apps and Cloud are fully accesible, but that Core Window is annoying. Has anyone observed this behavior besides me?
64-bit Windows 7

It seems the cloud-window is related to an inconsistency with Apple-Tools (the tools you have with an iphone).
Upon update today I got my "Core"-window again
So its either a bug by Adobe with Apple or vice versa - or so it seems.
Thank you Adobe/Apple for these problems.

Button for services for object not showing for FB03

Hi,
I have a created a Zcopy of transaction FB03.
But the button for services of object which contains attachment list and other features is not showing up in my Z trasaction.
Does anyone know the reason or the functionality behind this button.

Create a replica Z prg of the std prg SAPMF05L and assign a Z tcode to it.

List of Services/ Total amount for service for a project

Dear All,
Can i get a report of services which i procured for a project in a month ?
regds,
CB

Hi,
Please use Tcode ME2J for Purchase Order of Projects and ME5J for Purchase Requisition (services) for project.
Regards,
Uddhab

I am still having trouble with my iphone 5 searching fornetwork service. I have contacted ATT and they tried to say it was because my plan was not compatiable. But it was compatible when I set it up. Whats up with this issue?

contacted att about the issue, so I figured I would try here again. When I contacted ATT about it, and the person I talked to claimed that my service was not compatable with the phone. It is the 50 data package so I don't think that is the issue. Please help if you can.

No I haven´t take it to Apple Store, i think I will actually. My iphone was jailbroken and ulocked with gevey sim, but when this failures began i decided to restore it, and I did preserve the baseband, but when I took it into one of these "Places" they told me it would be a good idea to do a clean restore and see if this fixed the problem so I upgraded my baseband, and right now my iphone is freshly restore, no jailbreak no nothing.
Btw yes something like a year ago my screen was replaces by others not by apple, but I didnt had any issues after this.. until today (a little more than a year later).

I just tried to connect and sync my iTouch (4G) to iTunes and I got an error message that said :This iPod can'be used because Apple Mobile Device service is not started". I tried searching my PC for the program and no luck. Any suggestions?

I just tried to connect and sync my iTouch 4G to iTunes and got this error message: " This iPod can't be used because Apple Mobile Device service is not started". I just did the upgrade fo Safari and iCloud. Any suggestions?
Thanks!
Dan Farrell

I corrected the link in the previous post you responded to, but here is the correct link again.
http://support.apple.com/kb/ts1567
B-rockt

When starting up iPhone 4S, searching for service for 2 mins

Similar Messages

Maybe you are looking for