When stopping, the playhead always jumps back to previous position

Is there a way to turn this off? I have tried all combinations of options hiding under the play and stop buttons, the keys commands, cycle and non cycle and it still behaves the same way. It makes it very difficult to edit small details out of very large files.
Thanks

No, Logic doesn't go back to the previous play position unless you "want it to".
Maybe you can try to trash prefrences or just change these values a few times and see if that helps?
But before you do anything dramatic: Press Option Z ( = open the key command window), and try to assign the Spacebar to "Play or Stop and go to Last Location" - which is the behavior you have. Then assign it it just "Play or Stop".

Similar Messages

Curser always jumping back to the top of page

My curser is always jumping back to the top of the page. I will be half way down the page and it just jumps right back to the top. Is this a setting I can change?

The other problem occasionally seen is a swollen battery.
This can push up against the bottom of the trackpad and make it wonky, but usually the result is RANDOM movements.

Does anyone know when will the Developer portal be back today, tomorrow ?

When will the developer portal be back ?

How are we ment to deploy fixes and enhancements to our apps? I
They are already provisioned and you can still reach iTC, so I'm not sure there is anything stopping you?

Always jumps back to special characters like ü,ö,ß

hello,
so i have been having problems with my macbook pro recently. it has a US keyboard but i write a lot in german so i have to use special characters like ä,ü,ö,ß which normally is not a problem, because i can just stay longer on the a,u,o,s keys and it works perfectly. however, recently when i was typing one of the special characters a lot of the time it jumped back to the previous one i had typed a couple of words back.
this is really really annoying and i do not know what i can do about it or what i am doing wrong.
it would be awesome if somebody knows a way how to fix this problem.
thank you for your help!

Hi,
Unicode or Non-Unincode System ?
Displayed where ? SAPGUI ? Print Preview ? Spool-Display ?
And how is the XML file written ? OPEN DATASET ? BAPI ?
At all of these stages it might be either that it is only a display system, like the selected display CHARSET in SAPGUI, when it is a non-unicode system, or simply not coded correctly like OPEN DATASET without specifying the cdepage when necessary.
And it might even be, that even "displaying" the XML File is simply done with the incorrect codepage while the data inside the file is correct.
If you are on Windows, you might even face funny results when saving a simple textfile from notepad with ANSI/DOS and both Unicode variants and then go to CMD.EXE ans simply "type" the content.
All 4 results will be different, allthough notepad will display the same stuff.
So first of all, makes sure which codepage is relevant at all stages from DB-table to "display"
- DB-Charset
- SAP system type (unicode/non-unicode)
- SAP codepage (1100 / 410x )
- crosscheck the test from report RSCPINST
- Codepage on Windows running SAPGUI
- Selected codpage for Sapgui
Good hunting
Volker

OSX Yosemite: I can not move the icons on my display. They always jump to an other position

Hello,
I updated my OS X to Yosemite last week.
First problem: Since then, I can not update several applications any more. Yestersday, there where 5 updates: iMovie, iPhoto, Keynote, Pages and Numbers. iMovie and iPhoto updates were ok, but for the other 3 I received a message ""Update Unavailable with This Apple ID.This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled"". As far as I know, I was never refunded, or I never cancelled an app that was originating from Apple. I even don't know how to di it !!
Second problem: I can not move any more the icons on my display. And sometimes thy are moved to an other position after start. For example: the Mackintosh HD and the external Time-Maschine HD were always in the right upper corner on the display. This morning, after starting, they were in the left lower corner!! No way to slide them back to the other side. They always jump back to the lower left.
HEEELLLPPP !!

Hello,
Performance tip: Keep the Desktop clutter-free (empty, if possible) by: Klaus1
Mac OS X's Desktop is the de facto location for downloaded files, and for many users, in-progress works that will either be organized later or deleted altogether. The desktop can also be gluttonous, however, becoming a catch-all for files that linger indefinitely.
Unfortunately - aside from the effect of disarray it creates - keeping dozens or hundreds of files on the Desktop can significantly degrade performance. Not necessarily because the system is sluggish with regard to rendering the icons on the desktop and storing them in memory persistently (which may be true in some cases), but more likely because keeping an excessive number of items on the Desktop can cause the windowserver process to generate reams of logfiles, which obviously draws resources away from other system tasks. Each of your icons on your desktop is stored as a window in the window server, not as an alias. The more you have stored, the more strain it puts on the window server. Check your desktop for unnecessary icons and clear them out.
Keeping as few items as possible on the Desktop can prove a surprisingly effective performance boon. Even creating a single folder on your Desktop and placing all current and future clutter inside, then logging out and back in can provide an immediately noticeable speed boost, particularly for the Finder.
And it is why Apple invented 'Stacks' for Leopard.
Keep your Desktop as clutter free as possible!
Carolyn

My trackpad is freaking out. It is clicking constantly, sluggish, won't let go of things once it's 'grabbed' it. It's been happening for 24 hours on and off, and right now it's so bad it's difficult to type because the curser keeps jumping back words

My trackpad is freaking out. It is clicking constantly, sluggish, won't let go of things once it's 'grabbed' it. It's been happening for 24 hours on and off, and right now it's so bad it's difficult to type because the curser keeps jumping back words. To my knowlege nothing's happened to the machine. I've checked for updates and there hasn't been any trama or anything. Is this a known problem with trackpads? What can I do? If I bring it down to the store will they need to replace the machine?
Advice?

I usually use my laptop while lying in bed, so it's tilted at odd angles. I've just noticed that this problem happens when I'm in that position but when I put the laptop on a table or even just sit up and use it's fine. ***.

Stop the playhead from inside a movieclip

I am trying to stop the playhead from within a movie clip and when I test the scene (the movieclip) it works but when I test the main timeline scene, it stops the frame within the movie clip but continues on the main timeline. On the frames that stop I am using a script that will allow it to continue when the space bar is pressed. How can I stop it on the main timeline, and within the movie clip at the same time?
Is their a way to do something like _root.stop(); or something?

Have a question about the _root.stop().
I have a pause and play feature in a flash player so the user can stop the presentation along with all the voiceover that streams with the presentation.
I used the _root.stop() in the flash player hoping it will stop the main timeline, but also the embedded movieclip timeline. It stopped the main timeline, but not the other one.
How do I stop both timelines at the same time? the _root.stop() was not working for me.
Thank you, Brian

I downloaded the new I-tunes but i get always error 7 and i have to reinstall i-tunes. But the error always commes back! What now? How do I go back?

I donwloaded the new I-Tunes update but i get always error 7 and i have to reinstall I-tunes. But the error always commes back! What now? How do I go back?

In the course of your troubleshooting to date, have you worked through the following document?
Apple software on Windows: May see performance issues and blank iTunes Store

When will the iphone 6 be back in stock after it comes out?

When will the iphone 6 be back in stock at the apple store after it comes out?

Davidm82 wrote:
When will the iphone 6 be back in stock at the apple store after it comes out?
First they run out of stock.
Then when they get more stock in, they put it on the shelves and they are no longer out of stock.

Solve bugs or give us the chance to revert back to previous software without loosing waranty!

dear sony developers and and android developers
please solve bugs or give us the chance to revert back to previous software without loosing waranty!

You can always post any problems you have here and we can try and help.
Also, you would never have to lose your warranty, you can reach out to our Regional Support Office and they can revert the software back (by you visiting an office, or mailing the phone in).

Stop the deprecated madness bring back image data bindings to!!!

I have used dreamweaver since it was from macromedia, all the companys i worked for had dreamweaver, now that i decided to get my own for home and not use the company version things get worse and worse since this creative cloud bulls.... why is the only features use full on dreamweaver been deprecated?? i really cant understand why hate so much the customers that use it for dynamic building, whats the point always shooting us in the head, do you guys know how frsutrated we get when you first bought interkat then change it to the addt then it was deprecated, so dreamweaver was left with a few options for dynamic database producing, now its been removed and we are gived an extension that totalys sucks more than 50% of the features that we had with any other version are lost, example when trying to insert an image i have to do it all manually coding because now we dont have any more to pick dynamic images no databindings for that wtf....Dreamweaver is becoming just an expensive CSS editing tool with for that i can just use bootstrap and any other editor, using dreamweaver we are suppose to save time when developing websites, for a static site we can even use open office writer and save it has html.
Please stop the madness on taking out of the game dynamic options i have spent so much money on other extensions would hate to loss money again like i did with interkat, please listen to use stop it

Hello David,
I understand your analysis, but I also share the "ranters" one.
Like you have said, Adobe is a business.
But we are too.
Now tell me why should we pay that high a price for DW, when we can get a free editor like Netbeans with more or less all the features needed in web design/web development ? If we have to hand-code database connections ourselves, we are better off with Netbeans for instance, which allows step-by-step debugging, to boot. Server Behaviors and DW's extensibilty is (was?) the gem of DW. Take this out, and for many of us professionals, DW loses its appeal.
Like xadesadex stated, Sever Behaviors are not just a visual tool, it is a huge time-saver for building custom web sites, which many of us -- in this era of heavy frameworks, bloated CMS and other bootstraps -- still do on a daily basis. How fast can you build forms for CRUD functionnality without DW's Server Behaviors? And if you extend DW with your own code, you can even save more time. Take the late Fireworks : what would it be without John Dunning's and Aaron Beall's extensions? Haft-less productive a tool...
But in this removal, Adobe takes not only the risk to lose that fraction (how big/small?) of customers who use Server Behaviors on a daily basis, they also take the risk that another fraction of customers will leave because Adobe are presently giving a strong signal that what DW can enable them to do today, DW will not necessarily enable them to do in the future. In today's market, it takes a huge amount of time to learn a new software, change one's worflow and be productive again, as you know. But now, Adobe stubbornly refuse to answer the many ranting/protesting/unhappy posts about this removal, which destroys an indispensable asset for any business: trust from customers...
Adobe is a business, but we are too.
Removing this and that feature will end up closing the gap beetween DW and its competitors, some of which are free. And there will come a time when we will stop asking/ranting/being unhappy and take time to change our workflow and... software.
And the removal of Server Behaviors is a huge step in this direction.
Regards,
Xavier Pitel
mydreamweaverextensions.com

I updated the OS and now cannot edit pictures in Aperture because the program continuously jumps back to another picture

its super annoying and I have wasted hours today trying to fix it. Updated Aperture. Restarted and shut down computer. Deleted the /library/preferences as suggested

Sorry, mu iPod wasn't allowing me to type anything else. Not a good day for technology for me! Let me see if I can find that info...
I'm not sure which model. Purchased about 2 years ago. Using OS X Yosemite. Version 3.6 of Aperture. And another person had a similar question about jumping to other pictures on here and that was a suggestion.
When I go into Aperture, the first picture that shows up becomes the picture that it continuously jumps back to, once I edit it. Say I crop the first picture and move to the next one, it'll jump back to that first picture. Scroll 10 pictures down and the first picture will show up even though the picture highlighted is not the picture showing. This is leaving me unable to edit anything and quite frustrated.
Thanks

Anyway to stop Music list from jumping back to top?

Is there a way to tell iTunes not to reset to the top of my main music page when I click on a playlist and return to the main music library? It is quite annoying to click on a playlist and then go back to the music library and have the selection be at the top of the Artists rather than back to what is Now Playing in the main music library.

Sometimes it does and sometimes it doesn't. I'm trying to figure out some pattern so I can be factual when I talk to Apple about this.
What is always wrong, is that the Column Browser always resets when you leave and return.

I can only go back one page at a time because the drop-down jump back multiple pages feature is missing; how do I get this feature back?

On Firefox 3.6 the back and forward buttons also had a drop-down menu to enable me to jump back to one of the last, say, 10 pages I had viewed rather than only go back one at a time. Also, the reload button appears to be missing and I can't figure out how to bring these back. Otherwise, an awesome upgrade; thanks for all your hard work on this fantastic product.

You can right-click either Back or Forward button to open the tab history list.

Field missing when running the KSB1 transaction in Back ground

Hi,
With the help of Zreport am executing the KSB1 transaction in back ground and after execution of KSb1 am retrieving the report output and am displaying.
Issue is when am running Zreport in back ground the the output of KSB1 is giving the output by hiding the last column, where as am running Zreport in foreground the output of KSB1 giving the output with out hiding last field. Please guide me why the variance is coming in output when am running the Zreport in background........ and please advise me to rectify the problem....

In background it cant be displayed if report width is more than 255 chars. Check line size.
Satya

When stopping, the playhead always jumps back to previous position

Similar Messages

Maybe you are looking for