When streaming audio over Bluetooth the wifi is unusable.

When streaming audio over Bluetooth the wifi connection gets slow and unusable. So no Internet radios over Blutetooth, no streaming from Box.net etc. any solution?

Try and change the Wi-Fi channel.

Similar Messages

  • My ipod touch 3rd generation jumps hrough tracks whilst streaming music over bluetooth to a sony device how can I fix this?

    When streaming music over bluetooth from my 3rd generation ipod touch to a sony device it jumps every 10 seconds and not just when moving or anything other devices do not do this just the ipod how can I fix this?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset the Sony device
    - Unsync all music and resync
    - Reset network settings: Settings>General>Reset>Reset Network Settings. You will have to repair the device and rejoin all wifi networks
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:       
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    -  Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • Clicking sound when streaming audio in Safari

    hello,
    has anybody ever experienced a clicking sound when streaming audio over the internet? i have no idea where to begin to fix this problem.
    amber

    Dear Amber,
    I am experiencing the same problem on my iMac G5 when I am streaming movies from ANY browser AND when I watch trailers on Front Row.
    I think the QuickTime plugin has a problem streaming audio while the movie downloads, especially when the file is large (as in the case of Front Row streaming movies, where the files are all HD).
    If other applications are open concurrently, the problem is even more noticeable, because QuickTime 7 consumes a lot of resources and if you do not have enough RAM (and 512 MB does not seem to be enough with OS X 10.4.4) it will strive to perform.
    You may check how much memory is used by your computer by opening the Acivity Monitor utility.
    I hope Apple will become aware of the problem and suggest a workaround, because otherwise QT 7 is exceptional.
    Ciao,
    Alessandro
    iMac G5 (w/iSight)   Mac OS X (10.4.4)  

  • When streaming a movie with the new Apple TV, and using a DSL Internet connection, all audio sound works, e.g., the music track, but the audio track with the actor's voices, does not work. What can I do?

    When streaming a movie with the new Apple TV, and using a DSL Internet connection, all audio sound works, e.g., the music track, but the audio track with the actor's voices, does not work. What can I do?

    Hi Brian,
    Thanks restoring and restarting didn't fix my problem - i have started it fresh and still it doesn't work. Basically I press ONCE on the remote, after the machine has not had any commands for 10 minutes, and the cursor skips from one end of the menu to the other - so I can't choose network or update software etc - I sometimes manage to stop it randomly in the middle of the menu if I press on a command in the middle of the cursor skipping all the menu steps...not sure what the problem is but I have basically not used my brand new apple tv since I bought it for that reason! I should call Apple support I suppose! grrrr hate wasting time with stuff like this!
    Thanks for your help though!
    Pernille

  • My wifi worked for over a year then my parents took my ipod away for a month when i got it back the wifi didnt work i tried resetting my network it didnt work (it also says im connected) any suggestions?

    my wifi worked for over a year then my parents took my ipod away for a month when i got it back the wifi didnt work i tried resetting my network it didnt work (it also says im connected) any suggestions?

    they might have changed the password for the netowrk ..

  • Streaming audio-video on the mobile device

    Please, I must do the streaming audio-video on the mobile device using a server standard.
    I must to program the application for the server using j2se:in this case how i can send the file audio/video?This file have specifies classes?
    For the client i must using the j2me:in this case how can receive the file audio and creating the player?
    Thanks.

    Hi, please help,
    I have problem in this area also,
    am intending to stream audio and video data to mobile phone using j2me for my bs project.,
    is that true, midlets can only 'plays back' one file at time specified by url?
    I want to store many files in database( e.g ms access), and call them to midlets, to make some how interactive and real,because i have tomcat server installed in my pc.
    is this possible?
    How can i call file stored beyond path of WTK ?
    can i store audio/ video file in ms- access?
    Please, please help !
    thanks in advance.
    Message was edited by:
    nbkamani

  • Hello I have an Iphone 3, but I had a problem with the wifi connection when I want to connect the wifi icon is gray and I can choose to access the wifi

    hello
    I have an Iphone 3, but I had a problem with the wifi connection when I want to connect the wifi icon is gray and I can choose to access the wifi

    Read here:
    http://support.apple.com/kb/ts1559
    If nothing works, you most likely have a hardware issue.

  • When I am connected to the WiFi, my apps cannot be download. Once I had disable the wifi and connect directly to the service provider, the apps will start to download. Please advise what is the problem and solution for my iPhone 5.

    When I am connected to the WiFi, my apps cannot be download. Once I had disable the wifi and connect directly to the service provider, the apps will start to download. Please advise what is the problem and solution for my iPhone 5.

    I can't follow your meaning. What does connect directly to your ISP mean?
    Did you mean turning off WiFi but turning on Cellular Data on your iPhone?

  • HT1365 I have a new iMAC and when I start it up, the wifi connects fine, but when I wake the computer up, I have to manually select my wifi. Any suggestions about how to avoid this?

    I have a new MAC and when I start it up, the wifi connects ok, but when I wake it up, I have to manually connect it to my wifi, any suggestions?

    Take it to Apple and purchase an out of warranty replacement for it.
    Replacement is the only way to fix broken electronics.
    Allan

  • IPhone 5 won't play audio over Bluetooth in 2012 Lexus GX 460

    My iPhone 5 can connect via Bluetooth to my 2012 Lexus GX460.  I can make and receive calls over car speaker/Bluetooth.
    However, when I attempt to connect and play music, it says Bluetooth connection failed -- Please see portable player settings.
    Are there new settings on the iPhone to have the audio played over Bluetooth?
    My iPhone 4S and 4 worked perfectly.  Now, the iPhone 5 has issues.
    I have tried this:
    1. Removed the phone from the GX 460
    2. Added the phone back using password
    3. Says it is connected and I can make/receive calls
    Since the audio did not work, I tried:
    1. Turned off Bluetooth on the iPhone
    2. Turned off the iPhone
    3. Removed the phone from the GX 460
    4. Turned off the GX 460
    5. Started the GX 460
    6. Turned on the iPhone
    7. Turned on Bluetooth
    8. Paired the phone with the GX 460
    9. Calls can be made/received, but audio still does not connect
    Lexus has not returned any calls/messages on this one -- hoping someone may have an answer.
    Thanks!

    Had this problem in my 2012 IS F.  Fixed it by going to 'SETUP' -> 'Audio' -> BLuetooth settings.  Deleted the existing pairings and then repaired my phone.  Bingo!

  • No screensaver or sleep when outputting audio over HDMI

    I am using a Mac Mini i5 2.5 running 10.8.2.  This is a new setup and I have tested it with a standard computer monitor and it works fine, however when I implement it in my home theater setup running into a Pioneer VSX-1325 receiver, which I use for my video and audio switching the screen saver will not turn on once I have played any audio over the HDMI (iTunes, Netflix... etc).  From a cold boot the screen saver will boot up, until I trigger any sustained audio (non-system sounds) through the HDMI connection... This includes web based audio as well.  Has anyone else experienced this?  For this is a major issue as this display is connected to a plasma TV and I can not rely on my wife to always use a hot corner.  I do not want any image persistence or burn-in on my display.  I should add the the screensaver function will resume after a period of time when there is no audio being output. 

    Apparently this was an issue in Lion as well.  Thread below, but can Apple fix this ASAP before I have a Plasma with burn-in?
    https://discussions.apple.com/message/21324044#21324044

  • 3gs (3.1.3) trouble streaming audio via bluetooth to car

    thanks in advance for the help. im kinda new to this kind of stuff, but im trying to get my iphone to stream music via bluetooth through my car (range rover with stock stereo). I have the devices recognizing each other, and the phone is working through blue tooth, but i can't stream audio. the blue tooth icon is lit up at the top of the phone, and im under the impression a blue tooth icon should appear next to the volume bar in my itunes for streaming, but this isnt appearing. anyone have any ideas? also, is it possible to stream from a thrid party app like pandora? again thanks for any help that can be offered.

    still no luck. I have the phone working via bluetooth through the speakers perfectly, but have no idea how to stream my ipod via bluetooth. The bluetooth icon is lit up at the top of the phone, but one does not appear when the ipod is activated to start streaming. anyone have any ideas?

  • Audio over bluetooth behaves weird after using Siri on iOS 7

    iOS 7 changed the behavior of audio play through bluetooth after Siri is invoked, I was hoping that 7.1 would fix this issue but that hasn't been the case.
    While playing audio through bluetooth (either through Music app, Podcasts, Pandora, etc) if Siri is invoked for ANY command the following happens:
    Siri interrupts music as expected, command(s) is given to Siri, Siri performs command (be it read text, dial a number, answer question about weather, anything), Siri exits, music comes back on but with different sound quality (almost like it was part of a phone call), 20seconds later music stops. The music playing app wil still be running, the track progress continues, but no audio comes out of car speakers. Only way to resume is to quit app, restart the app, and select play -- everything goes back to normal after that (well, untill Siri is used again).
    This behavior is making using the iPhone in my car for music and navigation almost more work than it's worth. Does anyone have a clue what is going on here? Is this an issue that Apple would have to resolve in a future update? Everything worked as spected in iOS 6.
    My wife and I have two 2011 VW Jetta wagons, I use a 5s and she has a 5c, and both phones have the latest released iO -- the issue presents the same on both cars.

    Sometimes what happens next is (this doesn't always happen) after I say "Give me directions", Siri will say "Ok, getting directions."  Then the lockscreen appears.  If you don't put in your code the directions never start.  Since the phone was in my pocket I didn't realize this.  There was no way for me to know that Siri was not navigating me since the phone was in my pocket.
    EDIT: The above behavior only happens when asking for walking directions.  It happens if you say "Give me walking directions", or if you say "give me directions" and your default method of directions is set to walking directions in maps settings.

  • Streaming audio over networt

    my current project is voice real time chating between two computers over ethernet
    i catpured audio samples and saved them in an AudioInputStream object
    is there is any way i can stream the audio samples in the AudioInputStream object over ethernet
    can i use sockets and how or what are my alternatives?

    The Mac's Bluetooth can send audio, but not receive audio. Try connecting the phones headphone jack to the Mac's audio input.

  • Unwanted synchronization when streaming audio&video

    hi,
    i'm streaming audio and video, both of which are created with separate Processors. i'm playing them back on the client's side with separate players on separate ports. despite all this, when i pause the audio, the video pauses too!
    any suggestions?
    Thanks in advance :O)

    This is suposed to happen if the streams received have the same CName. I guess if you are able to send two different streams with 2 different CNames they won't synchronize. But I still don't know how to do that... :)
    Also, less useful but still a fact, if you receive the streams in two different VM's that won't happen either... :)
    Bira

Maybe you are looking for

  • SQL Express Edition, Reporting Services Role SCCM 2012

    hi, Question: Can I Use SQL Server 2012 Express Edition to configure Reporting Services Role on SCCM 2012 ? Thanks,

  • Looking for chmod equivalent for Windows

    A little back story, I've managed to cobble together an After Effects psuedo plugin installer for one of my upcoming scripts. One hiccup was dealing with file permissions, to properly install the plugin. After many searches, trial & errors, and final

  • Basic queries on LMS

    Dear friends, Just a few points on which i need your advise: 1. Period in the hostname If a device hostname contains a period (.), then LMS seems to detect it as a domain qualifier and only adds the text before the period into the DCR display name. D

  • Posting block at plant level

    Hello all,          Can you please let me know, how to block the posting of Goods movement at plant level. regards..chaitanya

  • HT204135 Photoshop CS5 Printing Problem on iMac with Epson 3880 printer

    All of a sudden I can't print from Photoshop CS5 on my iMac with OSX Mountain Lion installed.  I am able to print from Illustrator, however.   Have tried to update the Epson 3880 driver. After clicking on "Print", it doesn't register with the compute