When Switching Locations, WIFI Network Does Not Change

Hello All, I have two Wifi Networks at my home. I have a main router and a wifi extender. I have two locations set up {Home, Home (extended)} but when i switch locations, my networks do not switch.

Double check your network/wifi settings. System Preferences>Network>Advanced>Wifi

Similar Messages

Yosemite 10.10.1 - DNS cache does not clear when switching between WiFi networks

Before updating to Yosemite, DNS caches would clear when switching between WiFi networks, as they should.
For Example, when using an Exchange server, your server name might be something like mail.company.com. Outside of the corporate LAN the IP would resolve to the outside (WAN) address. When you move the laptop inside the corporate LAN, it should clear the cache so mail.company.com resolves to the internal (LAN) address. This is just one example of a dumb DNS transition not taking place switching from outside to inside (and vice versa).
Instead, OS X is holding onto the outside DNS record even when moving to the Corporate LAN. The only way to fix is to run the DNS cache command (which is MUCH more convoluted in Yosemite now), or more easily, to quickly turn off then turn on WiFi.
This is an irritation as I have to perform this action every morning, and every time I come back to my desk from offsite.

Well, clearing the caches is as simple as this, no?
Clear MDNS Cache
sudo discoveryutil mdnsflushcache
Clear UDNS Cache
sudo discoveryutil udnsflushcaches
One other thing: Have you tried 10.10.2? There are many many fixes in 10.10.2 over 10.10.1.

When connectd to wifi, itunes does not automatically see devices.

When I turn on my computer and connect to wifi and open iTunes, it does not auromatically find my ipad

when connecting your device to your PC through USB cable, have you checked the box "Sync with this iPad over wifi" under the "Summary" tab?

Wifi network does not show up every time my Macbook pro dies?

I tried turning the Airport on and off, and even tried it as if it were a hidden network, but the network just seems totally unreachable by the laptop.
Always have to go to Starbucks or anywhere else with a new wifi connection and then bring the laptop home, cause after that, my laptop seems to magically remember the old network.
Any help?

Change your router channel. Sometimes this is all you will have to do.
Power cycling the router. Read the router's user manual or contact their tech support for instructions.
System Preferences/Internet & Network/Network
Unlock the padlock
Locations: Automatic
Highlight Airport
Click the Assist Me button
In the popup window click the Diagnostic button.
System Preferences/Network- Unlock padlock. Highlight Airport. Network Name-select your name. Click on the Advanced button. Airport/Preferred Networks-delete all that is not your network.
Place a check mark next to "Remember networks this computer has joined." Click the OK button and lock the padlock. Restart your computer.
http://support.apple.com/kb/TS1920 Mac OS: How to release and renew a DHCP lease
No internet connection (wireless)
Check to see if an extra entry is present in the DNS Tab for your wireless connection (System Preferences/Network/Airport/Advanced/DNS).
Delete all extra entries that you find.
Place a check mark next to "Remember networks this computer has joined."
Other resources to check into:
How to diagnose and resolve Wi-Fi slow-downs
Pv6 troubleshooting
Mac OS X 10.6 Help: Solving problems with connecting to the Internet
What Affects Wireless Internet?
Solutions for connecting to the Internet, setting up a small network, and troubleshooting

Safari 5.0 - URL does not change when changing location

I have noticed this on two Macs running 10.6.3. When moving between pages (eg, clicking on a link within a page, or using the Google search bar to locate and load a new page), the URL in the address bar does not change to the new location. It remains at the
This applies whether the new page is within the same domain, or is at a different location.
Specific test: Load http://news.bbc.co.uk in Safari. Towards the top left of the page, there's a link to the BBC home page, which should appear in the status bar as "http://www.bbc.co.uk". Clicking on it will send you to that page, but the URL will remain as the news subdomain. If you click to another tab, then click back, it'll then update correctly.
Matt

Hi Matt,
MIght be corrupted Safari pref files.
Go to the Safari Menu Bar, click Safari/Preferences. Make note of all the preferences under each tab. Quit Safari. Now go to ~/Library/Preferences and move this file com.apple.safari.plist to the Desktop.
Relaunch Safari and see if that makes a difference. If not, move the .plist file back to the Preferences folder. If Safari functions as it should, move that .plist file to the Trash.
If the problem persists, go to ~/Library/Caches. From the com.apple.Safari folder move the "cache.db" file to the Trash. Relaunch Safari.
Carolyn

Menubar does not change when switching apps

Sometimes when I switch applications, the menu bar does not change.
The proper menu bar is there, I can use it, but the text shown is some previously focused application.
Switching apps once or twice fixes the issue, but it is very annoying.
This is a fresh re-install of Lion, but I retained my users and applications.
I have tried removing the systemuiserver plist file and rebooting, but the problem persists.
Any ideas?

A link would be nice but I suspect that you are not gettign the finger (you knwo what I mean) when you roll over the link because your href is not set to anything.
<a href="" onclick=MM_openBrWindow('images/image.jpg','largeDisplay','scrollbars=yes,resizable=yes,width=100,height=120')
Set your href to "#" or "javascript:;" - the latter is preferred.

From time to time when I click a searched link the colr of visited links does not change. It works fine after I delete history and cookies. Can I fix that. I am using windows XP. Thankste

From time to time when I click a searched link the color of visited links does not change. It works fine after I delete history and cookies. Can I fix that. I am using windows XP. Thanks

Here's the error message I get.
Note the TC is connected to my Airport Extreme via ethernet and my iMac is also connected to the AX via ethernet so it's not a wifi issue.
I can see the TC in the finder so it's not 'gone' from the network either.
Also note that just then the TM system pref pane was claiming a backup error, citing my 'network password' and still refusing to backup. I waited 5 minutes and did some tidying of my office while I pondered this and then tried again and voila it worked ok.

When I try to use bluetooth speakers, the option to switch to bluetooth speakers does not appear in ipod mode

when I try to use bluetooth speakers, the option to switch to bluetooth speakers does not appear in ipod mode

- Make sure the mic hole is clear and unobstructed. It is the little hole on the back by the camera lens(if has back camera). For the 16 GB one without the back camera the mic hole is on the top edge near the center.
- Open the Voice Memos app and see if you see movement on the VU meter needle or changes in the moving waveform graph with changes in noise level trying to be recorded.
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

When extending my wifi network using an Extreme as my main and an Express to extend.. does it help to make sure that both devices are on the same channel or does it even make a difference if they are on different channels?

when extending my wifi network using an Extreme as my main and an Express to extend.. does it help to make sure that both devices are on the same channel or does it even make a difference if they are on different channels?

Have you even tried the process in which i have described in my previous post?
Yes, many times. If you are setup to "extend a wireless network, the screen looks like this:
If you click the Wireless Options button, the screen looks like this:
Where is it on this screen that you see a setting to adjust the channel? It sounds like you are confusing "create a wireless network"....which does allow you to adjust channels.....with "exend a wireless network" which does not.
Normally, when you extend a wireless network, AirPort Utility used to always assign the same channel to the extending device. That is no longer the case. It might be the same, or it might be different. You have no control over this, so you have to accept what AirPort Utility thinks is best.

When I try to upload a file it goes through the correct proceedure, but does not change the remote file i.e.Index.htm

Hi
I have an uploading problem to the server. The problem is when I try to upload a file it goes through the correct proceedure,
but does not change the remote file i.e.Index.htm, or three stages1.htm.
My Localroot folder is C:\Gods Plan Web\
The site map layout is C:\Gods Plan Web\Index.htm
The folder for the remote site is /public_html/
Should the local root folder mirror the remote site, i.e./public_html/
if this is so, what should I put into the
(a) Local Root Folder box?
(b) site map layout box?
The FTP is performing well other than changing the intended file.

You should be uploading only the contents of your local root to the public_html folder (remote root).
The index.html you use as your site's home page needs to be in your site root. If you look at your Files window in DW, you should have something like the following...
Site - Whatever you named your site
     index.html
     images
     pages
          page1.html
          page2.html
If you have any folder between Site - and the index.html page, like...
Site - Whatever you named your site
     mywebsite
          index.html
It will upload to the public_html while still in that folder, so to find your page online, you would need to type something like...
www.mydomain.com/mywebsite
public_html should NOT appear within your local files and if it existed there, would cause a redundancy if uploaded. You would need to type www.yourdomain.com/public_html to see the uploaded pages.
If you could post a screen shot of your expanded Files window while connected to the server (just connect and click the Expand button in Files, don't drill down into any of the directories), we may be able to see the issue.

When I convert my pdf doc to word, the fonts go really weird and it also puts some text into boxes. when I try to select the test and change the font, it does not change it properly?

When I convert my pdf doc to word, the fonts go really weird and it also puts some text into boxes. when I try to select the text and change the font, it does not change it properly? This is making it impossible to amend.

Hi Janedance1,
If the PDF that you converted already has searchable text, please try disabling OCR as described in this document: How to disable Optical Character Recognition (OCR) when converting PDF to Word or Excel. (If the PDF was created from a scanned document and doesn't already have searchable text, disabling OCR isn't a great option, as the text won't be searchable/editable in the converted Word doc.)
Please let us know how it goes.
Best,
Sara

I am in Muse 2014.3. When I edit a page, in the preview everything looks fine, but when I upload it to FTP, the page does not change, even when I upload the whole site. Is this a bug? I don't know what to do.

I am in Muse 2014.3. When I edit a page, in the preview everything looks fine, but when I upload it to FTP, the page does not change, even when I upload the whole site. Is this a bug? I don't know what to do.

Hi Jaap,
Are you sure about your FTP credentials (FTP folder and site URL) that you are using for the upload? Are you able to see the updated files in the remote directory of the FTP server, after you finish uploading the muse file, using an external FTP client like FileZilla?
Thanks
-Prashanth

Tabset in page fragment , the url does not changes when we select tabs...

Hi
Thank you for reading my post.
i noticed that when we use a tabSet in a page fragment , selecting tabs does not change the current URL ,
is it a correct manner ? I think when we select a tab and it opens another page the url should change.

HI,
There is a relevant topic on EA discussion.
Topic :TabSet in page fragment , selecting a tab open a page but does not change the current browset url
https://feedbackprograms.sun.com/project/forum/thread.html?cap={3F4DA363-16D3-4D4C-920C-992ECB054B6D}&forid={CC6B8562-F896-4A44-ACB6-4684BDD05E19}&topid={361DBDF0-FFDE-4618-9FC6-86E4903A9565}
Hope this helps.
Please post messages related to Creator 2 EA at the feedbacks programs portal. The URL is:
https://feedbackprograms.sun.com/login.html
Thanks,
RK.

BOM item qty does not change when header qty changes in Outbound Delivery

Hi,
We are using sales BOM and exploding it in Sales Order. ( Item category of components as TAE )
I am creating a delivery with reference to a sales oder ( i have maintained copy controls to copy header and item data). Now when i change BOM header quantity in delivery document system is not redeterming the components quantity , item quantity of the components does not change.
Please let me how can i control item qunatity when BOM heade quantity changes in outbound delivery document
Thanks
Venkata Rama Reddy.K

Hello Venkata,
The components item category is TAE, that means the item category for the header item will be TAQ. Also the pricing will be carried out at the header item level only.
Now for your query:
The standard item category controls of TAQ will not have any connection between the header & the item level quantities in the delivery. If you change the quantity of the header item in the sales order, the quantity of the compnenets will be automatically adjusted. But this will not happen in the delivery with the normal settings of TAQ.
Solution:
Go to transaction code VOV7 - select TAQ - double click - In the Bill of Material/Configuration section , there is a field "Create Delivery Group" - select "X - Form delivery group with one delivery date".
Save the settings. Now create a new sales order & then create the delivery & try to change the quantity of the header item, the system will automatically change the quantity of the components. (the system may not change the quantity of the components in the delivery of the old sales order - change it manually)
With best regards,
Allabaqsh Patil.
Idhasoft Ltd.

Cursor does not change when hovering over pop-up window link

I created a text link for a pop-up window. The link does work, but the cursor does not change to a pointy finger, the standard link icon.
I don't know a lot of javascript, but can figure it out if it's just adding some code.This was done in CS3. Any help would be appreciated! Here's the code:
function MM_openBrWindow(theURL,winName,features) { //v2.0
window.open(theURL,winName,features);
Thanks in advance.
Todd

A link would be nice but I suspect that you are not gettign the finger (you knwo what I mean) when you roll over the link because your href is not set to anything.
<a href="" onclick=MM_openBrWindow('images/image.jpg','largeDisplay','scrollbars=yes,resizable=yes,width=100,height=120')
Set your href to "#" or "javascript:;" - the latter is preferred.

When Switching Locations, WIFI Network Does Not Change

Similar Messages

Maybe you are looking for