When syncing faces: names do not appear and key photo is distorted on iPad

I'm syncing from Aperture 3.0.3 to an iPad. I select a number of projects to sync, and some faces.
Most faces appear fine. However, there are a handful of faces with distorted key photos / thumbnails, and no name appears below them. Each key photo contains photos from an individual I selected, and appears in the correct alphabetical order, it just does not have the name.
With the exception of one face, these photos are of friends, of which I have not selected projects above. So I'm certain this is an issue where the iPad or iTunes has grabbed all photos for that person, and few if any of these photos are in the projects I selected above.
The other face that is distorted is my newborn daughter! I definitely have several albums selected with her in them.
Any ideas?

I had something similar happen, albeit with a few differences. I'm syncing from iPhoto and I discovered that when viewing the list of faces one of the names was missing. All of the photos were there and the group was in the correct alphabetical order, but the name was missing.
I tried a bunch of things. I removed all photos from the iPad and resynced-- no joy. I renamed the face in iPhoto and resynced-- no joy.
Here is what did finally work for me, although it is such a kludge I wouldn't be surprised if it didn't work for everyone. First I went to the Photos tab in iTunes switched from 'All photos..' to 'selected..'. Then I unselected all albums, all events, and all faces except for the checkbox next to the name that was "missing" from the iPad's faces label for that person. I allowed it to sync, removing all of the photos except for the faces for that person. To my surprise, it was now properly named on the iPad.
Then I went back to iTunes, switched back to 'all photos..', synced again, and the face label was still present.

Similar Messages

  • I updated my iphone and lost all my notes there is lots of important notes, how can i get em back especially that on itunes when i sync my iphone a note appear that there is no back up on icloud,and i cannot restore?

    i updated my iphone and lost all my notes there is lots of important notes, how can i get em back especially that on itunes when i sync my iphone a note appear that there is no back up on icloud,and i cannot restore?

    Without a backup on iCloud, there needs to be another device using the same @icloud address that is syncing to the notes.  Without that, there is no way to go back in time to create a backup before performing a major update.

  • When I plug in iPhone (5.1.1) to computer, playlists show up on the iPhone (when plugged in), that do not appear when it is not plugged in. And I can't erase them. I have iTunes match, and deleted all my music on the iPhone, but that had no effect.

    When I plug in iPhone (5.1.1) to computer, playlists show up on the iPhone (when plugged in), that do not appear when it is not plugged in. And I can't erase them. I have iTunes match, and deleted all my music on the iPhone, but that had no effect on the phantom playlist that shows up on the PC when I plug in the iPhone to the PC. I cannot manually move songs or playlists from the PC to the iPhone
    Help greatly appreciated.

    Unplug your Iphone out of your computer and replug it back in. It took me several times before I could do this

  • Some of my contact names are not appearing when they text message me.  They are just showing up as their numbers. I have them saved in my phone so i am not really sure why their names aren't showing up when they message me?

    some of my contact names are not appearing when they text message me.  They are just showing up as their numbers. I have them saved in my phone so i am not really sure why their names aren't showing up when they message me?

    I have this identical problem.  For a while my group texts didnt show up on my ipad.  Then one day they did, maybe everyone in the group started using the same os version or something.  Ever since my first reply to the group there have been complaints of multiple threads.  I can not find a pattern for when my group text's decide they want to create a new thread. (it doesnt happen every time)  Everyone in the group has deleted the thread, we've all toggled imessage on/off etc.  There still hasn't been a solution.
    Any help would be appreciated.
    Thanks

  • When I plug in my iphone my charging symbol does not appear and my phone is not charging.

    When I plug in my iphone 4 my charging symbol does not appear and my phone is not charging.  Do I need a new battery?  It is only a year old.

    Can you try a different charger/USB lead? Also check the connector on the bottom of the iPhone for pocket fluff

  • I have An iphone 5... And when I take a picture it appear on the photo app on the middle of the screen and not on the whole screen.. How can I fix it?

    I have An iphone 5... And when I take a picture it appear on the photo app on the middle of the screen and not on the whole screen.. How can I fix it?

    Definitlely have it looked at. That could be a hardware deffect on the maker(apple) so there could be a definite replacement option.

  • PowerBook G4 boots to unfamiliar login. List of known user accounts does not appear and original admin user name and password is rejected. What is going on here?

    PowerBook G4 boots to unfamiliar login. List of known user accounts does not appear and original admin user name and password is rejected. What is going on here?

    There are no children, nor other suspicious characters that have "played" with my computer. One moment I'm in, the next time I turn on/restart the powerbook I'm at a screen with the name of the hard drive and two fields: username and password. Not a list with pictures and names ie 'Katie Jo' with an orange icon and 'Guest' with a silhouette of a head.
    In an attempt to remedy this problem, I backed up files using target disk mode and firewire cable. I then, rebooted in single user mode, typed in the correct script and essentially made the computer appear virgin again. Original start up welcome screen display with multiple languages, and then set up prompts such as language, network, and registration. After completing the cues and the "just a few more questions" page, I press continue and am left at a grey standstill, with the continue button greyed out, and no other actions. I'm only able to "go back" by clicking the go back button, all the way to the beginning of the set up, and as I proceed through the steps a second time, I'm greeted with the same halt. What is this?

  • CDs loaded, Artist name does not appear in ARTISTS list

    Among all the CDs I've loaded and songs purchased, I have 2 Carly Simon
    CDs on my video iPod. However, Carly Simon's name does not appear in my
    list of ARTISTS in the Music Menu.
    I did a sync with my iTunes list and the songs are indeed loaded.
    Why is her name missing from the list and how do I get it back?
    It used to be there!
    Thanks-

    I just found the answer on the discussion board.
    In my SETTINGS I had compilations turned on.
    When I switched it off, Carly Simon was back in my
    ARTISTS list.

  • Safari app not working, webpage not appearing and unresponsive. Calling all iphone 5 experts for help!!!!!!

    Hi, need help. Safari app working fine until just now. Webpage not appearing and when trying to open the app, its a white page. Like you see pages, bookmark, the search tab, but when trying to press any of the buttons, it is unresponsive. When i try to go to setting to see if the problem can be fix, my safari setting isn't open either. I try going to icloud and try to turn off and on the safari data, in hopes that it would work. Nothing. I have done reseting network, and currently resetting all setting to see if this will work. I also did a soft restart, hard restart, turn on and off the phone multiple times. All other apps are responsive but safari. My itunes won't let me sync my phone and in order for me to do that, i would have to reset phone to factory setting, which would be a last option for me.

    Reset the device:
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    If that doesn't help, tap Settings > General > Reset > Reset All Settings
    If that doesn't help, tap Settings > General > Reset > Reset Network Settings
    You will have to re enter your Wi-Fi password.
    No data is lost due to a reset.

  • Contact name does not appear after upgrading to iOS 5

    I recently upgraded to iOS 5 and after doing so, contact name does not appear when someone calls; but text messages the name appears. I have saved all my contacts under +9 format. 

    This indicates that the phone was carrier locked and had been 'hacked' to unlock it. Updating the phone has re-locked it to the original carrier.
    ONLY the carrier it is locked to can authorize unlocking it. Not all do so. Contact the carrier and find out what their policy is.
    If it's locked to AT&T, you may as well sell it and buy a new phone. AT&T will not unlock iPhones for any reason.

  • The window to select dimensions simply does not appear and I can't move forward, due to variables exit in the report

    Dear experts,
    I am having an issue when I try to create a WEBI document using Bex query through OLAP connection (Bics).
    Due to variables exit, it is not possible to open query pannel in webi to choose wich dimensions to add to the webi document.
    The window to select dimensions simply does not appear and I can't move forward!
    In RSRT ou Bex Analyzer, the query is running fine without errors.
    CMOD code is like this (I believe there is not any error as it is working flawless on other reports for other variable names):
    WHEN 'ZREDT1'.
         IF i_step = 2.
           CLEAR wa2.
           READ TABLE i_t_var_range INTO wa2 WITH KEY vnam = 'ZRE_DT_IN'.
    *      wa2-low = |{ v_year_h }12|.
           IF sy-subrc EQ 0.
             v_year_h = wa2-low(4) - 1.
             CONCATENATE v_year_h '12' INTO wa1-low.
    *        wa1-low = wa2-low.
             wa1-opt  = 'EQ'.
             wa1-sign = 'I'.
             APPEND wa1 TO e_t_range.
           ENDIF.
         ENDIF.
        WHEN 'ZREDT2'.
         IF i_step = 2.
           CLEAR wa2.
           READ TABLE i_t_var_range INTO wa2 WITH KEY vnam = 'ZRE_DT_IN'.
           IF sy-subrc EQ 0.
    *        wa2-low = |{ v_year_h }12|.
             v_year_h = wa2-low(4) - 1.
             CONCATENATE v_year_h '12' INTO wa1-low.
             wa1-opt  = 'EQ'.
             wa1-sign = 'I'.
             APPEND wa1 TO e_t_range.
           ENDIF.
         ENDIF.
    Please provide assistance,
    Thanks in advance,
    Kind regards,
    André Oliveira

    I solved it.
    The problem was due to date coming to exit - as you know some time intervals start at 01-01-1000, and as I was calculating 1000-1 = 999
    I was getting and interval from 99901 to 201405. Do not know if it was not working because CHAR NUMC6 was failing trying to recognize interval 99901 - 201405, but probably, this was the issue.
    Thanks for your inputs,
    Best regards,
    André Oliveira

  • Name dos not appear

    When i receive a call the name dos not appear because when i saved it in my contact list it has an Area code, and if remove the Area code then the message don’t have the contact name

    There are several threads about this. Search the others in case there has already been a solution of some sort

  • Since I synced my ipad to my iMac I have duplicate photos appearing in the Photo section on my iPad and one can be trashed but the other one can't. How can I get rid of the ones without the trashcan?

    Since I synced my ipad to my iMac I have duplicate photos appearing in the Photo section on my iPad and one can be trashed but the other one can't. How can I get rid of the ones without the trashcan?

    Thanks so much. I was afraid to mess with that.  But when I unsynced them, it worked.

  • Last Approver name in not appearing in the shopping basket

    Hi  SRM Gurus,
    We have Implemented N step Badi for our client .During Post Go Live we are facing this issue
    We have created a shopping basket and there are 3 approvers to approve. After the first approvers is approved the name is not appearing in the Shopping basket.
    We are in SRM 4.0
    Can you tell what could be the reasons
    G.Ganesh Kumar

    Hi Ganesh,
              How you fixed your problem ?  Actually i am facing same problem for Bid invitation.
    Regards
    Abhijeet

  • Column Name is not appear

    Hi Experts,
    I have using this query for generate XML File through Store Procedure
    Store Procedure Runing Succesful. For using below query Execute whole Store Procedure
    Problem Path is Generate but  Coloumn Name is not appear in it.
    exec [dbo].[ICR_Rpt_Form2Rpt_XML] '20110722', '20110722'
    Please help me out.
    BR,
    Manish Pandey

    set ANSI_NULLS ON
    set QUOTED_IDENTIFIER ON
    go
    ALTER PROCEDURE [dbo].[ICR_Rpt_Form2Rpt_xml]  @FrmDate  nvarchar(50) ,
    @ToDate nvarchar(50)   AS
    select OINV.Docentry, I.Linenum,
    '0' as [Sr.],OINV.U_ICR_WHS as SeriesName,
    SeriesName+' '+convert(varchar(50),OINV.Docnum)as [DocumentNo.],
    I.Docdate as [Date],
    I.ItemCode as ItemCode,
    I.ItemName  as [ItemName] ,I.BatchNum as [BatchNo],
    O.U_ICR_TFFNUM as [TarriffClass],V.Quantity as [Quantity] ,((O.U_ICR_BED/O.U_ICR_STOCK)* V.Quantity) as [Duty] ,
    ((O.U_ICR_ECESS/O.U_ICR_STOCK)* V.Quantity) as [Edu.Cess],((O.U_ICR_CESS/O.U_ICR_STOCK)* V.Quantity) as [S.H.Cess],
    ((O.U_ICR_AED/O.U_ICR_STOCK)* V.Quantity)  as [SplCVD],O.U_ICR_INVNODATE as [supplierNo.],
    O.InDate as [Date1],O.CardName as [Manufacturer],U_ICR_STOCK as [Quantity1],
    U_ICR_BED as [Duty1],U_ICR_ECESS as [Edu.Cess1],U_ICR_CESS as [S.H.Cess1] ,
    U_ICR_AED as [SplCVD1],U_ICR_ETRYNOOE as [Ent.No.1], U_ICR_PAGEOE  as [P/ENo.1] 
    from OIBT  O ,IBT1  I,OINV,NNM1 ,INV1 V ,DLN1 D where  D.LineNum=v.BaseLine and
    D.TrgetEntry=v.DocEntry and D.ItemCode=v.ItemCode and I.BaseLinnum= D.LineNum and I.BaseEntry=D.DocEntry and
    O.whscode=V.whscode  and O.U_ICR_STOCK>0  and U_ICR_MODVET ='Y'  and
    ( (I.bASEtYPE=13 and  (V.baseType=17  or V.baseType=-1 or V.baseType=23))   or (V.bASEtYPE=20 )) and
    OINV.Docentry=V.DocEntry  and OINV.Docnum =I.BaseNum   and I.Direction=1  and
    O.Itemcode=I.Itemcode and O.BatchNum=I.BatchNum   and NNM1.Series=OINV.Series  and I.DocDate between @FrmDate and @ToDate  and  OINV.docdate  between @FrmDate and @ToDate and  O.U_ICR_STOCK != 0  and oinv.docentry  not in (select baseentry from rin1 where basetype=13) group by OINV.U_ICR_WHS,O.U_ICR_STOCK, OINV.Docnum,OINV.Docentry, I.Linenum, OINV.Docentry,I.BaseNum ,O.U_ICR_INVNODATE,I.Docdate ,I.ItemCode ,I.ItemName  ,I.BatchNum ,U_ICR_TFFNUM,U_ICR_SUPPCODE,O.InDate,O.CardName,U_ICR_STOCK,U_ICR_BED,U_ICR_CESS,U_ICR_ECESS,U_ICR_ETRYNOOE ,U_ICR_PAGEOE,V.Quantity,I.LineNum,SeriesName ,U_ICR_AED  union select  OINV.Docentry, I.Linenum, '0' as [Sr.],OINV.U_ICR_WHS as SeriesName, SeriesName+' '+convert(varchar(50),OINV.Docnum) as [Document No.],I.Docdate as [Date],I.ItemCode as ItemCode,I.ItemName  as [ItemName] ,I.BatchNum as [BatchNo],O.U_ICR_TFFNUM as [Tarriff Class],V.Quantity as [Quantity], ((O.U_ICR_BED/O.U_ICR_STOCK)* V.Quantity) as [Duty] ,((O.U_ICR_ECESS/O.U_ICR_STOCK)* V.Quantity) as [Edu.Cess],((O.U_ICR_CESS/O.U_ICR_STOCK)* V.Quantity) as [S.H.Cess],((O.U_ICR_AED/O.U_ICR_STOCK)* V.Quantity)  as [Spl CVD],O.U_ICR_INVNODATE as [supplier No.],O.InDate as [Date1],O.CardName as [Manufacturer],U_ICR_STOCK as [Quantity1],U_ICR_BED as [Duty1],U_ICR_ECESS as [Edu.Cess1],U_ICR_CESS as [S.H.Cess1] ,U_ICR_AED as [SplCVD1],U_ICR_ETRYNOOE as [Ent.No.1], U_ICR_PAGEOE  as [P/ENo.1]
    from OIBT  O ,IBT1  I,OINV,NNM1 ,INV1 V,DLN1 D where D.LineNum=v.BaseLine and D.TrgetEntry=v.DocEntry and D.ItemCode=v.ItemCode and I.BaseLinnum= D.LineNum and I.BaseEntry=D.DocEntry and U_ICR_MODVET ='Y' and ( (I.bASEtYPE=15 and V.baseType=15 ) ) and OINV.Docentry=V.DocEntry  and V.baseRef =I.BaseNum   and I.Direction=1  and O.Itemcode=I.Itemcode and O.BatchNum=I.BatchNum   and NNM1.Series=OINV.Series and O.WhsCode=V.WhsCode  and I.DocDate between @FrmDate and @ToDate and   OINV.docdate  between @FrmDate and @ToDate and  O.U_ICR_STOCK != 0 and oinv.docentry  not in (select baseentry from rin1 where basetype=13)  group by OINV.U_ICR_WHS,I.Linenum,OINV.Docentry,I.BaseNum ,O.U_ICR_INVNODATE,I.Docdate ,I.ItemCode ,I.ItemName  ,I.BatchNum ,U_ICR_TFFNUM,U_ICR_SUPPCODE,O.InDate,O.CardName,U_ICR_STOCK,U_ICR_BED,U_ICR_CESS,U_ICR_ECESS,U_ICR_ETRYNOOE ,U_ICR_PAGEOE,V.Quantity,I.LineNum,SeriesName ,U_ICR_AED,OINV.Docnum order by OINV.Docentry
    for xml path('xml'),type
    BR,
    Manish Pandey

Maybe you are looking for