When syncing iPod to new iMac will playlists that are on iPod get transferred to iTunes on new iMac or will i loose those playlists already on iPod.

when syncing ipod to new imac will playlists that are on ipod get transferred to itunes on new imac or will they be lost?

This thread may help you:
https://discussions.apple.com/thread/2577582?start=0&tstart=0

Similar Messages

  • When syncing iPod touch to MacBook, I have selected to sync only events newer than 360 days. Yet I get message that sync will change 8000 events on "this computer"  most of which are years old and many are recurring events.  I'm afraid to proceed

    When syncing iPod touch to MacBook, I have selected to sync only events newer than 360 days. Yet I get message that sync will change 8000 events on "this computer"  most of which are years old and many are recurring events.  I'm afraid to proceed with sync. 

    Having the same problem here. As a first time mac user, Apple has certainly made a bad first impression.
    For me, the issue seems to occur when transferring files between computers that are connected to the same access point (when transferring files from wired computers on the network there is no issue). My vista laptop and every laptop I have tried has worked perfectly fine with this access point so I am 100% convinced it is the mac. Basically when I copy the files, after about 100mb, I am unable to access anything on the local network or internet until I restart Airport. The weird thing is that even though I am unable to access anything, the airport utility says it is connected. I might also note that the wireless signal strength is full.
    If I can't get this figured out in a few days, this computer is going back to the store where it came from and I will officially label myself anti-mac. This type of issue is just unacceptable for something so main stream.

  • HT1369 when syncing ipod, receiving blue screen error WDF_Violation

    When syncing ipod, receiving blue screen error WDF_Violation

    I am having a similar problem. I have an iPod Classic 80Gb with a brand new computer using iTunes11 on Windows 8.
    iTunes sees the iPod on the Sidebar, but when I try to sync or change any settings, roughly half the time it will crash my windows and cite a WDF Violation error. There doesn't seem to be any rhyme or reason to it. Regardless, even if it doesn't crash, it won't sync. It gets as far as "Starting Sync" and then it just stops.
    I have verified that the iPod still syncs fine on my old xp machine, and I have tried the following, all to no avail.
    Enabling Disk use
    Converting higher bit rate songs to 128 kbps AAC
    Deleting and reinstalling the iPod's drivers through device manger
    Running iTunes in XP SP3 compatibility mode
    Running iTunes as Administrator
    At one point, with disk use enabled and 128 kbps bit rate selected, I managed to get it to prompt me to Erase and Sync. it went on to erase everything on the iPod, but would not load any of my media back up. Subsequent attempts to sync gave the same result.
    I had a look at the link above, but it's a brand new computer and I installed and updated everything myself to the latest version, except my Wacom tablet, which was acting funny with the latest driver, but it can't be that because the original driver from the install CD I reverted too has workd fine in conjunction with iTunes and this same iPod for years on my other machine.
    I am getting extremly frustrated with this. Someone please help make it better !?!

  • ITune display error -53 when sync ipod on Windows 8

    I'm try to sync new music to my iPod by iTune. After connect iPod to computer it will shown message "iPod have problem choose repair harddisk"   After repair finished my music on ipod all lost. After restore by iTune message shown -53 . Can I fix it?

    Hey ermides,
    Thanks for the question. The following resource provides information if you are receiving a -50 error message when syncing:
    iTunes displays -50 error message when syncing iPod on Windows XP - Apple Support
    http://support.apple.com/en-us/ts1539
    Thanks,
    Matt M.

  • I have just purchased a new macbook and need to sync my iphone with itunes, i understand that you can only sync your phone with one itunes account. I do not want to wipe my iphone when syncing with this new itunes account. Any advice welcome

    I have just purchased a new macbook and need to sync my iphone with itunes, i understand that you can only sync your phone with one itunes account. I do not want to wipe my iphone when syncing with this new itunes account. Any advice welcome

    1) authorize iTunes on the new machine for your iTunes store account(s)
    2) connect your device and right-click or control-click it in the iTunes Source list, then choose transfer purchases from the shortcut menu that appears.
    3) sync the device
    iTunes will wipe the iPhone but, since you transferred your purchases in the previous step, your content will be in your library and you can re-populate the iPhone with it.

  • Itunes 10.6.1.7 keeps crashing when syncing with the new Ipad

    Glad to find this forum!
    It's been a disappointing and frustrating week for me as I have tried to sync my new ipad with itunes 10.6.1.7. Itunes keeps crashing without reasons when syncing either apps, music or videos. Btw, I am using Windows XP SP3.
    So far, I have not been able to play any videos because Itunes always crashes.
    I have tried to re-install Itunes for more than 5 times [with fresh install] but the problem still occurs. I have also tried to downgrade to Itunes 10.5.3 as suggested in the other threads but Itunes still crashes. This only happens when syncing with the new Ipad.
    I have an Ipod Nano which works great on both version of Itunes.
    I am really disappointed because I can't watch movies and/or listen to music on my new ipad because it keeps crashing.
    My wish is just simple. I just want to be able to watch movies and listen to my music on my new ipad. Sadly, this is not possible yet.
    Can anyone help?

    I get the exactly the same problem with win 7, i rang apple support who suggested i try another machine/or create another account on my machine???? why should i, stupid ipad 3rd gen is now sitting here un syncable, apple support ....tut tut very poor support, its a shame im out of the 7 day period otherwise this ipad would be going straight back, older versions of itunes worked fine, some one must know a fix for this??

  • I share a macbook with my other half and we both use it for our iphones. When syncing using the new software I now have all of her and my contacts on my phone.  I don't want her contacts! How do I get rid?

    I share a macbook with my other half and we both use it for our iphones. When syncing using the new software I now have all of her and my contacts on my phone.  I don't want her contacts! How do I get rid?

    Hi,
    You have 2 solutions:
    1 - You can use 2 differents icloud account
    2 - You use the same account but you don't sync yours contacts.
    You configure that in  Settings > icloud
    You activate or desactivate what you want.
    Have a nice day.

  • When syncing iPod the PC lost power. once power restored synced iPod but the sleeve detail has been blanked. Also when syncing a 'miss-match' message is reported on iTunes. how do I get the sleeve detail back onto iPod?

    When syncing iPod the PC lost power. once power restored synced iPod but the sleeve detail has been blanked. Also when syncing a 'miss-match' message is reported on iTunes. how do I get the sleeve detail back onto iPod?

    http://ww2.cs.fsu.edu/~rosentha/linux/2.6.26.5/docs/DocBook/libata/ch07.html#excatATAbusErr wrote:
    ATA bus error means that data corruption occurred during transmission over ATA bus (SATA or PATA). This type of errors can be indicated by
    ICRC or ABRT error as described in the section called “ATA/ATAPI device error (non-NCQ / non-CHECK CONDITION)”.
    Controller-specific error completion with error information indicating transmission error.
    On some controllers, command timeout. In this case, there may be a mechanism to determine that the timeout is due to transmission error.
    Unknown/random errors, timeouts and all sorts of weirdities.
    As described above, transmission errors can cause wide variety of symptoms ranging from device ICRC error to random device lockup, and, for many cases, there is no way to tell if an error condition is due to transmission error or not; therefore, it's necessary to employ some kind of heuristic when dealing with errors and timeouts. For example, encountering repetitive ABRT errors for known supported command is likely to indicate ATA bus error.
    Once it's determined that ATA bus errors have possibly occurred, lowering ATA bus transmission speed is one of actions which may alleviate the problem.
    I'd also add; make sure you have good backups when ATA errors are frequent

  • ITunes displays -48 error message when syncing iPod Nano on Windows XP

    My girlfriend's mom's iPod Nano ran out of charge while jogging so she decided to charge it on her daughter's iHome. The next day she went to use her iPod but it was totally empty of all music and files. When she tried to sync it to iTunes, she received an eror message stating, "An unknown error has occurred (-48)" from iTunes and a Windows message stating that some iPod folder/file was corrupted.
    If anyone receives such a message, I was able to correct it by:
    -Plugging in your iPod to your PC
    -Ignore the error messages
    -Go to My Computer
    -Find your iPod's drive letter (ie. G:)
    -Right-click on it and select Properties
    -Go to Tools Tab >Error-checking and select Check Now
    You should be able to sync your iPod as before. I do not claim to be an expert so be warned that it may not work for you. Good luck!

    Hey ermides,
    Thanks for the question. The following resource provides information if you are receiving a -50 error message when syncing:
    iTunes displays -50 error message when syncing iPod on Windows XP - Apple Support
    http://support.apple.com/en-us/ts1539
    Thanks,
    Matt M.

  • ITunes displays -50 error message when syncing iPod on windows 7

    I am trying to sync my ipod and appears this error
    iTunes displays -50 error message when syncing iPod

    Hey ermides,
    Thanks for the question. The following resource provides information if you are receiving a -50 error message when syncing:
    iTunes displays -50 error message when syncing iPod on Windows XP - Apple Support
    http://support.apple.com/en-us/ts1539
    Thanks,
    Matt M.

  • Unknown error when syncing iPod

    I've been trying to sync my iPod to iTunes but this error comes up.
    +"Attempting to copy to the disk "LILY'S IPOD" failed. An unknown error occurred (-69)."+
    I've tried restoring and it has restored the iPod just fine, but once I connect it to try and sync it again the above error comes up. I've restarted my computer, I've searched for iPod updates. I was using iTunes version 8.0.0.35 and installed 8.0.1.11 and I still get the error.
    Can anyone help me? Thanks

    See if this trouble shooting article helps.
    iTunes displays error 69 when syncing iPod.

  • When I click on some songs in my itunes library it says the file is not detected.  If i hook up my ipod will i loose the songs already on it or will it retore the files to itunes?

    When I click on some songs in my itunes library it says the file is not detected.  If i hook up my ipod will i loose the songs already on it or will it retore the files to itunes?

    Before to attach your ipod.... try to find the file where you put your music.... click on that song.... itunes will ask you if you want to locate it.... from there you have to find the song(s) that is one of the folders in your PC.
    http://support.apple.com/kb/TS1408

  • How can I keep my iPhone 4 from erasing everything when syncing to a new iTunes?

    How can I keep my iPhone 4 from erasing everything when syncing to a new iTunes?

    rajiv_c wrote:
    ...  This phone is a AT&T mobile, howver, I am using this phone without any jailbreak in India. ...
    Unlikely...
    See these discussions on that error message...
    https://discussions.apple.com/search.jspa?peopleEnabled=true&userID=&containerTy pe=&container=&spotlight=false&q=3194

  • Just bought macbook pro and using homesharing to transfer all music and movies from old mac, if i start syncing iphone in new macbook pro will i loose all content already on it

    just bought macbook pro and using home sharing to transfer all music and movies from old mac, if i start syncing iphone in new macbook pro will i loose all content already on it

    iTunes: How to move [or copy] your music to a new computer [or another drive] - http://support.apple.com/kb/HT4527
    Quick answer if you use iTunes' default preferences settings:  Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive.  Open iTunes and immediately hold down the Option (alt) key (shift on Windows), then guide it to the new location of the library.

  • My Laptop was stolen. On the Itunes, I had many songs saved from other sources, that are currently on my Itouch. Itunes wants me to Erase to sync, and I dont want to erase. I have no access to hose sons anymore. Is there a way to sync my Touch with my new

    My Laptop was stolen. On the Itunes, I had many songs saved from other sources, that are currently on my Itouch. Itunes wants me to Erase to sync, and I dont want to erase. I have no access to those songs anymore. Is there a way to sync my Touch with my New laptop withoit erasing my I touch?

    Syncing to a new iTunes library or computer will erase your iPod. Only if you back up your iPod manually before syncing, you can restore your device from that backup again. A manual backup does not include the sync process.
    Do this:
    Disable autosync in iTunes, connect your iPod to your new computer and right click on it in the device list and choose backup. iTunes will backup your ipod without syncing.
    Transfer your purchases the same way, choosing "transfer purchases" this time.
    When you connect your device for the first time, all media content will be erased. But you can restore your settings and app data from your manual backup afterwards.
    Don't forget to set up at least one contact and event on your new computer to be able to merge calendars and contacts when you sync the iPod for the first time.
    Music is one way only, from the computer to your device, unless you bought the songs in itunes and transferred your purchases.
    There is 3rd party software out there, but not supported by Apple, see this thread:http://discussions.apple.com/thread.jspa?threadID=2013615&tstart=0
    About backups and what's saved:iTunes: About iOS backups
    How to back up and restore:http://support.apple.com/kb/HT1414
    How to download apps for free again:http://support.apple.com/kb/HT2519
    Saving other data is also described here. How to back up your data and set up as a new device

Maybe you are looking for

  • Recovering Data from Original Hard Drive

    My daughter has a 4 year old G4 iBook. It ran flawlessly for nearly 4 years, then its original 30 gig hard drive gave up the ghost and she had a new 160 gig drive installed in its place. Unfortunately, the folks who installed the new drive (an author

  • Need to fix Error 1009 for very simple task!

    Hi to all, I'm learning AS3 for the first time so that I can make a game, but I'm stuck on the most basic of tasks! What I want to do is be able to click on a button to take me to the next frame of the main timeline, which I've called "gameboard". Th

  • String to Date object

    how do i convert "Sat Sep 08 22:27:05 GMT+00:00 2001" into a Date object

  • SOA Suite Installation on Linux

    Hi all, Well, I don't have much experience with Linux so I think that it might be the issue here. I installed the database and now im trying to execute RCU on terminal (./rcuHome/bin/rcu) to create the needed schemmas but i'm getting the following er

  • Database list in rsp database setting configuration

    Dear Experts When I see the Databases list in RSP under Configuration -> Databases -> Databases tab, it shows me already not existing and old version databases. I did an upgrade from SBO 2004.2B PL75 ,an old fashioned version to 8.81 PL09. When I see