When system is switch on(poweron) long beep and display is coming after hour

hello sir
when system is switch on(poweron) long beep and display is coming after hour
This question was solved.
View Solution.

Hello @anandgopinainar,
I am not quite sure what you are trying to say here. I would be happy to assist you, but first I would encourage you to post your product number for your computer. I am linking an HP Support document below that will show you how to find your product number. As with this I can provide you with accurate information.
How Do I Find My Model Number or Product Number?
As well if you could please elaborate on what is going on so that I understand it would help as well.
Please re-post with the requested information and I would be happy to provide you with assistance. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Similar Messages

HT5860 What about if when I start up my MacBook Pro it makes 3 short beeps 3 long beeps and 3 short beeps. Or is that the same as 3 long 3 short 3 long?

The screen does not turn on and makes 3 short beeps 3 long beeps and 3 short beeps again then turns itself off. Well I just tried to turn it on again and now there are no more beeps but instead just a black screen. The LED light in the front of the laptop is on and not blinking. Does anyone know what be wrong with my laptop?
Also this is a 2010 model I believe

Read this:
http://support.apple.com/kb/HT5860
Ciao.

1 long beep and 2 short beeps

hello this is my second post....before i had problems with me8 bios, then downgraded using this forum tool..thx for that.
now i can boot my PH67A-C43 (B3) board and use it normally, but my problem is that when ever i try to restart or boot it again without waiting i get 1 beep with is normally the one which indicates that system is OK and then 1 long beep and 2 short beeps and no display on the monitor....i can only boot my PC if i let it turned off for 5 or more minutes...this is really annoying!!
specs:
Operating System
   Microsoft Windows 7 Home Premium 64-bit SP1
CPU
   Intel Core i5 2400 @ 3.10GHz   32 °C
   Sandy Bridge 32nm Technology
RAM
   8.00 GB Dual-Channel DDR3 @ 665MHz (9-9-9-24)
Motherboard
   MSI PH67A-C43 (MS-7673) (SOCKET 0)   37 °C
Graphics
   VX2250 SERIES (1920x1080@60Hz)
   ATI Radeon HD 5700 Series (ASUStek Computer Inc)
Hard Drives
   56GB OCZ-AGILITY3 (SSD)   30 °C
   149GB SAMSUNG HD161GJ (SATA)   24 °C
Optical Drives
   SONY DVD RW DRU-880S
Audio
   Realtek High Definition Audio

i heard about the full cmos clear yesterday....after the flash i just pressed the clear cmos button at the back panel...but now i did the full clear...
well i have an aerocool e80 700w psu...i was thinking it might be the psu...then i tried on my old 500w coolermaster psu and it worked fine(i could restart as many times as i wanted/no blank screen)
then i hocked back the aerocool to confirmed if it was at fault and POOOFFFF no more blank screen.i restarted any time with no problem...how can it be?what caused the blank screen and BSOD?
i will try to use the PC as much as i can and see if i get any blue screen...will keep u posted
***memory is Kingston 4*2gb.i ran memtest86 it found no error over 2 hours...i never overclock anything

Won't start up - 3 long beeps and 1 short beep repeated

As I was watching Netflix, the display went crazy and displayed horizontal lines and the computer froze.
I held the power switch down to shut it off.
After restarting, seemed to work fine for a few minutes, then same thing happened.
Reset again. Seemed to start up fine (heard the chime and the hard drive going) but no display output.
Reset again. Got the start up chime, a white screen with horizontal lines, and I get 3 long beeps and 1 short beep repeatedly.
Any ideas?
Thanks for your help in advance.

The beeps you're hearing means the system has no usable memory. You can try reseating the memory or swapping for other known working memory (pain as it is to open the mini up). Otherwise, typically that means it's new logic board time. See this Apple article: http://support.apple.com/kb/HT1547

Extra 1GB RAM causes 1 long beep and 8 short beeps.

This is my first post, and I am having problems installing the maximum 3GBRAM on my KT4AV L mobo. I bought 3 1BB sticks from crucial, all PC2700. Each stick is ok. The first two work with a 512MB stick in the 3rd slot, but when I try to add my 3rd GB stick the computer cant get past the 1 long beep and 8 short beeps. I have tried adjusting the voltage to 2.7, (didnt try 2.8, as someone in another thread thought it might be unwise for life of RAM.)
Is there a solution to this? havent updated my BIOS, but I am nervous about doing this because I have heard it can mess everything up. Any advice will be welcome.

Well, I can't guarantee the whole amount of RAM will fit. It ought to, but that is all I can say. Grayone is saying this as well as I but shorter.
I have two more reasons for wanting you to get another PSU:
- This is not particulartly quiet, 26dB idle is nothing to shout about. http://www.qtec.info/products/product.htm?artnr=14321&specs=1 (Please note the little word "peak" - that is not the same as "max".
- I speculate in that you think you need this much memory because your system isn't working up to the level of the in-built parts. The PSU has hindered efficient use.
How much would you like to spend?
Prices are for comparison only!
The Tagan 480W seems to be 1000 Sw kr.
"My" Zalman is about the same.
Antec is a very good, quiet and reliable brand, and I'd say more powerful and feature-rich than both the Tagan and Zalman - for that money you'd get: http://www.antec.com/specs/true480_spe_EU.html and for half of it you might get this: http://www.antec.com/ec/productDetails.php?ProdID=07483
Hiper and Sirtec/Chieftec and Seasonic are other good brands - Sirtec I'v got in one system and that is running very good and quiet.

3 long beep and cannot open MacBook

I just bought a new MacBook and I am a new Mac user. Each time I turn on my Black MacBook 10.5 it won't open and it keeps beeping 3 long sounds. I need to hold down the power button to switch it off then turn it on, then it open. Is there any problem in my MacBook? What I will do to eliminate the sound and to open smoothly?
Thanks.

I also have the 3 long beeps and gray screen. This is incredibly frustrating just before a business trip to Dubai.
I eventually figured it was a RAM problem, I upgraded my Macbook to 2 1GB sticks in November and everything worked fine. Now it is the 22nd of Jan, used Macbook last night fine, this morning it wouldnt start, 3 beeps and gray screen.
I heard someone say the RAM could have been dislodged so i opened up the back and removed the ram and reinserted it..
NO CHANGE, still beeps 3 times and doesnt startup.
So i removed one 1 GB stick thinking it might be faulty, surprise, it works on just 1 GB, leopard starts up fine.. great but i want to use both sticks!
I shutdown the computer..
i figured it might be that stick which was bad, so to check i swapped it with the stick i removed and restarted, also works fine..
conclusion not bad memory...
thought it might be the port, so i swapped the stick into the other port and restarted, leopard starts fine...
Conclusion: Not a bad port
So tried both sticks again then believing nothing was wrong, 3 beeps pop up leopard doesnt start,
Conclusion for some reason leopard is now not accepting 2GB, it will only boot with 1GB.
This makes no sense, I have a Macbook Intel Core 2 Duo 2 Ghz machine.
There is no reason why it suddenly stopped working with 2 GB.
I am at a loss, and considering backing up all my files and reinstalling leopard next week after my trip with a complete format. Although this shouldnt be nexxessary and may not change anything. Otherwise take it into an apple store and see what they say.

I hear 1 long beep and 2 short beeps and I get no video.

I have a MSI mainboard AMD socket 970A-G46. When I turn on my PC, one long beep and two short beeps will occur. Second, I will not see any video. What is the cause of this and and do I get to the BIOS menu on this mainboard?
Also, sometimes the my PC will go to sleep mode on its own and when I press the button to get it out of sleep mode, it will not go out of sleep mode. What is the cause of this and how can it be solved?

Here is the information about my PC.
Windows 7 Home Premium
MSI Mainboard: AMD Socket 970A-G46 CrossFireX
Sentey Power Supply and Coolers
Power Supply- BCD450-0C
Coolers- 1 XFan210mm and XFan80mm x 2
DDR3- G.Skill Ripjaws X- F3-12800CL9D-863XL
Graphics Card- Gigabyte AMD Radeon HD 6450 Series- GV-R645-1GI
I hope this is enough information. Now, can someone tell me what is wrong with my PC?

H57M-ED65 with i5 cpu - added HD and now we get 1 long beep and 2 short beeps

So a friend of mine has a MSI H57M-ED65 that he added a 2 terabyte sata drive too. Everything has worked perfect with this board for about 3 years. they turn it on and now it gives a beep of 1 long beep and 2 short beeps. No Video. Now I have seen the beep codes but it doesnt add up. I have removed everything and reseated. They do not use the onboard video, if I remove all the memory and power it on the board recognizes the fact no memory is there and gives the correct codes. I have checked all connections but the only thing online I see is it says possible video problem. Doesnt really add up and I checked the few connections that had been un plugged and everything is correct.
Has anyone ever seen this problem after putting in a drive? Oh yea also I have unplugged the dvd and hd's and still get the beeps. If its still video issue I am going to assume it has to do with the onboard video cards because with out the other card installed it still gives errors.
Any help would be greatly appreciated.

i heard about the full cmos clear yesterday....after the flash i just pressed the clear cmos button at the back panel...but now i did the full clear...
well i have an aerocool e80 700w psu...i was thinking it might be the psu...then i tried on my old 500w coolermaster psu and it worked fine(i could restart as many times as i wanted/no blank screen)
then i hocked back the aerocool to confirmed if it was at fault and POOOFFFF no more blank screen.i restarted any time with no problem...how can it be?what caused the blank screen and BSOD?
i will try to use the PC as much as i can and see if i get any blue screen...will keep u posted
***memory is Kingston 4*2gb.i ran memtest86 it found no error over 2 hours...i never overclock anything

I turn on but 9 beeps and display blank

i turn on my macbook pro but 9 beeps and display blank

Beeps when you turn your system on means there is a memory issue. The memory might be bad or missing or the wrong memory for the system or could indicate a logic board issue. The first thing you should do is to reseat the memory. Take each memory card out and put it back, then try to boot your system. If that doesn't work, and you have an alternate set of known working memory, perhaps from a friends MBP (with the same memory), try that. If that doesn't work, then your system needs to be taken to your local Apple store or Apple Authorized Service Provider.

When I leave my iphone in my room and went out. After I came back, I find several apps which was not opened before had been opened. It here are also 8-10 photos of my ceiling being taken, includes video. Also my home page picture has been changed.

When I leave my iphone in my room and went out. After I came back, I find several apps which was not opened before had been opened. It here are also 8-10 photos of my ceiling being taken, includes video. Also my home page picture has been changed.

also my sister said she heard music being played fr my phone suddently. Is my iphone being hacked?

K8N Neo Platinum: no video output, long beep and long wait, led 3 green

I have a K8N Neo Platinum for about 4 years without big problems. Two days ago I dismounted teh pc to clean and put a new HD and when I mounted again it did not work.
Problem:
Quote
* System hangs and no video output;
* Speaker keep making long beep followed by long rest;
* D-Bracket LEDs are 3 green and 1, 2, 4 red meaning it hangs somewere near teh keyboard controller initialization;
What I have tried:
With no change:
Quote
* Taken off everything from teh MB and put back only CPU, PSU, RAM, VGA and plugs for power and reset switch;
* Turn on teh MB out of teh case;
* Clear teh CMOS setting JBAT1 and by removing battery;
* Tried all possible combinations of one and two RAM sticks and slots on MB;
* Take out all of teh RAM;
* Take out VGA;
* Take out RAM and VGA;
* Switched VGA;
* Switched PSU;
With little change:
Quote
* Take out CPU: make all four leds red and no beep.
System specifications:
PROC
Athlon 64 3400+
RAM
2x Kingston 512mb ddr400
VGA
nVidia geforce4 mx 440 agp
VGA2
nVidia geforce fx 5200 agp
MB
MSI K8N Neo Platinum
HDD
Seagate SATA 180gb
PSU
Coletek 450W +3.3V~20A, +5V~32A, +12V~16A, +5VSB~2.0A, -5~0.5A, -12~0.5A
I have already had some problems like this before with power failures but magically things worked again. This time was teh same. I got things working some times at random (really random lol) by taking power cables, reseting bios and turning back on but teh problem reapeared when I put HDD back and did not work again when I removed it. Now I can't seem to get it to display anything.
Any suggestions? Thanks in advance.
EDIT: sry I made a little confusion: It is a K8N Neo and not a K8N Neo2.

Quote from: Fredrik on 18-November-08, 05:19:33
Thanks!
Keyboard problem, you think? What do you have?
Two things that are quite common:
Do not attach PS2 keyboard when there is power in the system.
Do attach USB keyboards when you are up and running in Windows.
This is not it, but Logitech keyboard drivers often complicate things.
I do use a PS2 kbd but never had problems with it (unlike teh PS2 mouse). I do not think it's kbd fault because it won't POST with or without it.

One long beep and no video on boot

Just wondering if anyone could help me out with this little problem I seem to be having. I've checked all the connections to the board and everything is right. When I try to boot up all i get is one long high pitched 4 or so second beep that loops every 2 seconds and no video (using onboard video) or anything else.
Even tried using a small 4x video card to see if that was the problem.
System Specs:
MSi p4mam-l microatx mobo
VIA Vt8751a & VT8235 chipsets
p4 2.0ghz celeron processor @400fsb
Corsair ddr266 mem
award 430w power supply
wd 40gb ata100 hd

Pretty long beep but I finally figured it out and got it fixed. Stupid board was flaking out over the corsair mem for some reason. It took six different sticks of ram before i found one that the damn thing would boot up to.

Long Beep and autotype key

I have HP Envy 4, Long beep sound while starting up and in password it autotype.

Yes, I can see that now..
Iwe plugged the 4-pinned square plug into the JPW and also unplugged the CD-rom and HD just in case.
But I just tried it, and I still get a loud beeping sound that wont stop (until I turn it off) and a blank screen..
All Iwe got connected now is the JPW(4-pin square), JPWR(normal 4-pin) and ATX1(24-pin)
Thanks for the tip, sadly it wasnt enough :P..

PDF addresses not longer load and display PDF in Firefox and solutions suggest to other users with problem DON'T WORK (work fine in Chrome and Safari)

This is an ongoing problem with other users. When putting a PDF in address window of Firefox and clicking go to address FIREFOX WILL NOT LOAD AND DISPLAY THE PDF. This problem has come up in questions from other users on your site. NONE OF THE SUGGESTED SOLUTIONS WORK! (trying either the Firefox PDF viewer or the Acrobat viewer as default viewer)
I am using Firefox 23.0.1 (as some of the other users with the same problem). This was not a problem in the past with Firefox. Safari and Chrome continue load and display PDFs just fine from their addresses. This is a big problem as I now have to inform people who want to view my PDFs NOT TO USE FIREFOX BUT TO USE SAFARI OR CHROME.

It appears that a link to a PDF on an internet page will not download in Firefox either!
I went to this page:
http://www.nasa.gov/connect/ebooks/earth_art_detail.html#.UjYEzrwsU08
and tried to download the PDF link at the bottom of the page (Download: PDF 11.3 MB) It didn't work! Nothing happens. Tried it in Safari and it worked flawlessly.
I have a PDF file of my work in the public_html folder on my URL. I give the address generated by that file to people who want to view my work---this works perfectly in Safari and Chrome. As to your other question, can't bookmark it if I can't get to it in Firefox.

Lately when using Firefox the mouse no longer works and no links or tabs can be selected. The only way to get the mouse to work is to switch windows with ctrl+tab

The mouse is completely unavailable, not even able to select anything on the taskbar or start button.
When this started happening I had to restart firefox, then I tried opening the task manager to see if anything was hogging resources and I found simply opening the task manager freed up the mouse, then I found simply using alt+tab to switch windows did it, then I discovered using alt+tab to cycle through the available windows straight back to firefox does it.

See "Hang at exit":
*http://kb.mozillazine.org/Firefox_hangs
See "Firefox hangs when you quit it":
*https://support.mozilla.org/kb/Firefox+hangs

When system is switch on(poweron) long beep and display is coming after hour

Similar Messages

Maybe you are looking for