When Tape ends computer blue screens

When capturing from my JVC camera through the firewire in my sound card it works most of the time. However if the tape ends during capture the entire computer will crash and go into a blue screen listing "Machine Check Error" or something like that. I've been able to replicate it to when the tape ends and tested all my other hardware to see if anything else was at fault. Has anyone else had this problem and is there a work around or is it based on my ancient camera?
I'm using a amd x2 4800, 3 gigs of ram, geforce 7800gtx, audigy 2 zs, 500 gig raid x0, jvc camera model gr-dvm90. Adobe Premier Pro CS3.
I can mostly work around it but if there is some way to fix it then that would be great. Thanks.
-Greg LaRose

Does this happen when using other capture software?
Some troubleshooting tips:
http://ppro.wikia.com/wiki/Troubleshooting
Cheers
Eddie
http://ppro.wikia.com The PremiereProPedia

Similar Messages

HT1369 when syncing ipod, receiving blue screen error WDF_Violation

When syncing ipod, receiving blue screen error WDF_Violation

I am having a similar problem. I have an iPod Classic 80Gb with a brand new computer using iTunes11 on Windows 8.
iTunes sees the iPod on the Sidebar, but when I try to sync or change any settings, roughly half the time it will crash my windows and cite a WDF Violation error. There doesn't seem to be any rhyme or reason to it. Regardless, even if it doesn't crash, it won't sync. It gets as far as "Starting Sync" and then it just stops.
I have verified that the iPod still syncs fine on my old xp machine, and I have tried the following, all to no avail.
Enabling Disk use
Converting higher bit rate songs to 128 kbps AAC
Deleting and reinstalling the iPod's drivers through device manger
Running iTunes in XP SP3 compatibility mode
Running iTunes as Administrator
At one point, with disk use enabled and 128 kbps bit rate selected, I managed to get it to prompt me to Erase and Sync. it went on to erase everything on the iPod, but would not load any of my media back up. Subsequent attempts to sync gave the same result.
I had a look at the link above, but it's a brand new computer and I installed and updated everything myself to the latest version, except my Wacom tablet, which was acting funny with the latest driver, but it can't be that because the original driver from the install CD I reverted too has workd fine in conjunction with iTunes and this same iPod for years on my other machine.
I am getting extremly frustrated with this. Someone please help make it better !?!

Asus computer blue screen when injected with HP2515 printer

When the hp2515 inject into my asus computer for printing, it will appear blue screen after i am printed for few paper by injected with USB 2.0 port~~can anybody solve my problem?? I am suffered for that problem~

Hi @yiyi,
Welcome to the HP Forums!
I see that you are getting a blue screen whenever your plugin your HP Deskjet Ink Advantage 2515. I am happy to look into this for you!
I am not sure what your Operating System is, but if you are using Windows 7, I think this guide will help, Windows 7: A Windows Stop Error (Blue-Screen Error) Occurs When Plugging an HP Printer into the Comp....
Otherwise, please respond with the Operating System you are using. If you do not know the Operating System you are using, please visit this website. Whatsmyos, and if you have tried other ports on the computer.
Hope this solves your problem, and have a great day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Computer Blue Screen when VXI chassis is shutdown Using NI VXI-8360T MXI-VXI and PCIe8362 controllers

Problem Description :
Using NI VXI-8360T MXI-VXI and PCIe8362 controllers.
The software I have is Measurement and Automation Explorer version 5.5.0f0 Problem:
We have had both controllers set up and working together to include running other VXI instruments using the MXI bus. The problem we are having is that when the VXI chassis is shutdown, it causes the computer (that has the PCIe8362 card in it and connected to the VXI card bus) to experience a blue screen of death.
With our older 777178-01 VXI-MXI-2 configuration, our computer does not experience the blue screen when shutting down the VXI chassis while the computer is still on. Do you have information or past issues with the computer experiencing a blue screen due to VXI chassis shutdown?
NI Software : Other version
NI Hardware : VXI/VME/MXI device VXI-8360T
Driver Version :
OS :
Windows 7

Are you using NI-VXI 3.8.1 (or later) and supported hardware for VPO (variable power on) support?
http://digital.ni.com/public.nsf/allkb/6B1F05BB5C0E321186257950007424B2
I think you need to "warn" the hardware/driver you're going to turn the chassis off, either via MAX or a programatic call. Sorry I can't give any more specific help, but I've only heard about this and haven't ever done it myself.
- Robert

Firefox crashes MY COMPUTER!!! When I open it, my computer BLUE SCREENS then turns off!!!

Within the past few months, I have not been able to use Firefox at all. It started crashing my whole computer, making the whole thing go blue screen before shutting down, and I have uninstalled and reinstalled it TWICE, the second time sacrificing ALL OF MY BOOKMARKS, and even after that, it STILL CRASHED MY COMPUTER! My college professors prefer that I use this browser to do my WebCT assignments (and *tests*) and I have been unable to do so.

*http://kb.mozillazine.org/Profile_folder_-_Firefox#Mac
<pre><nowiki>Mac:
Profile folders are in one of these locations:
~/Library/Application Support/Firefox/Profiles/<profile folder>
~/Library/Mozilla/Firefox/Profiles/<profile folder>
The tilde character (~) refers to the current user's Home folder, so ~/Library is the /Macintosh HD/Users/<username>/Library folder. </nowiki></pre>

Computer Blue Screens when trying to import songs into iTunes.

Whenever I attempt to import songs from my desktop (or anywhere else,) into iTunes, my computer locks up, blue screens, and then restarts. I'd like to get this problem resolved soon, as all of my music is organized through iTunes, but I'm sick of this problem. Help?

b noir is the forum expert on troubleshooting those blue screen problems.
You might try reading some of his previous posts.
http://discussions.apple.com/search.jspa?threadID=&q=bluescreen&objID=c150&dateRange=last90days&userID=bnoir&numResults=15&rankBy=10001
Good luck!

Computer Blue Screens (BSOD) Upon Video Download Completion

Every time I try and download a TV Show from the music store, the download will start and finish with no problem but upon completion I see the progress bar at the top of the screen change from the download progress bar to the other (likely file-moving) progress bar and my computer immediately blue screens. Windows gives me the standard "serious error" message at startup, and the error report returns nothing.
I have tried downloading the latest version of iTunes which includes the latest version of Quicktime and the same thing happens. A friend of suggested disabling hyper-threading, so I did that and I still get the same problem.
Does anybody know what the problem might be? Any help I can get would be appreciated. Thanks!

Exactly the same problem - while running FF4 after a minute or two the screen goes black for 10 seconds or so and then I get BSOD mentioning the atikmpag.sys as the culprit. I have the ATI Radeon HD4850 with the 8.831.2.0 driver (installed by Windows Update). There is a newer driver - but I have had problems with Windows 7 32 bit and the ATI drivers constantly so only upgrade when it appears in Windows Update. No problems with the same machine running Windows XP or Ubuntu. I have uninstalled FF4 and gone back to 3.6 as I have no issues with that version of the browser.

Computer blue screen while playing itunes movies

In the middle of a purchased, itunes movie, my computer suddenly emits a horrible sound before the blue screen of death appears. I have to manually hold down the power button to shut down the computer. I have the latest itunes updates. Any suggestions?

"It is really frustrating and have no idea *why it is not happening with the computer tech guys."*
+"I have a hard drive hooked up to the computer"+
The +"tech guys"+ when troubleshooting do not have any devices hooked up to the computer except maybe a keyboard. Did you take your comp to an Apple Store, an AASP or a comp repair shop that fixes PCs & Macs or just PCs?
Have you tried troubleshooting w/o the external HD?
Which "model" & "generation" G5 iMac do you have?
Need this info so that the knowledgeable users can provide you with the proper troubleshooting solution(s).
http://docs.info.apple.com/article.html?artnum=301724-en How to identify your iMac
http://support.apple.com/kb/HT1758 How to identify iMac (Mid 2007) and later models
http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh355.html Getting information about your computer
You can have this info displayed on the bottom of every post by going to 'My Settings' which is located in the column on the right under your name, and filling in the information asked for.
Thank you
!http://i45.tinypic.com/jl0z95.jpg!

Computer blue screens

I am using windows 7 on a Mac via boot camp. I have a hp5510 printer attached via USB. Frequently when I try and print the computer goes into a blue screen and I have to reboot. I have update drivers.

This seems to be caused by a couple of Apple systems files. The post here points to some possible fixes. Give it a shot, and let me know what happens.
Help Me! What is causing Blue Screen of death on boot camp?
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

How to correct or fix slow imac on start up or when switching user. Blue Screen will stay on for 3-5 minutes.

How do I fix a slow imac on start up and when switching user? The blue screen will stay on for 3-5 minutes.
Thanks

How much free space do you have on your hard disk? And have you ever performed a backup & clean install after an OS X upgrade?

Plugging in Ipod classic restarts computer + blue screen!

So I haven't had a problem with my 80gb ipod classic until last night. Last night I updated my itunes and then plugged my ipod in to sync it. Within a second a blue screen had appeared on my computer and my computer restarted. I tried again today and it did the exact same thing. I even tried it with itunes not open (so it's gotta be something with the ipod right!?) I tried a different USB, and no luck. Please help

Hi chaps,
you may add myself to your problem report list too.
After having installed iTunes 8 thru the update process called up from Vers 7 my iPod classic 80G is crashing the Vista computer. Blue screen indicates "usbappl....sys" to be the issue and after Vista recovery the problem report includes the info
BCCode: 1000007e
BCP1: C 00 00 00 5
BCP2: 8D7DC515
BCP3: 8895B688
BCP4: 8895B384
OS Version: 606001
Service Pack 1_0
The crash happens regardless of whether iTunes is running or shut down. The ipod classic 80G works on another machine under XP and using iTunes 7.xxx
I hope that Apple can very soon offer an update to iTunes.
cu

Can not turn on computer, blue screen an clock it's the only thing I get

After last turn off, I have tried to turn on my MacBook Pro, but the only thing I can get is the blue screen with the logo and the pinning clock, nothing else, need some advise, what could I do?

Thanks, but i tried as you suggested, the progress bar on the bottom just filled up to a 1/3 of it, then went like before, blue screen with logo and the timing clock... Any other suggestion?? Thanks

What happens when my iPod have blue screen and then it shuts down?

So today, i was watching YouTube, then suddenly the iPod turns into blue screen for one second and just shuts down, then I turned it on, it still worked, I was a little afraid that my iPod 5 broke, so I searched it up on google, then it comes out that the same problem happened with iPhones that also have iOS 7.1 , so I'm just wondering if anyone that also have iOS7.1 and iPod 5 have that problem, thank you.

Software glitches happen all the time
If it ocurs again
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Why does my computer blue screen when I try to edit photographs?

Below is the exact error message I get.
Problem signature:
Problem Event Name:    BlueScreen
OS Version:    6.1.7601.2.1.0.768.3
Locale ID:    1033
Additional information about the problem:
BCCode:    101
BCP1:    0000000000000031
BCP2:    0000000000000000
BCP3:    FFFFF88003165180
BCP4:    0000000000000002
OS Version:    6_1_7601
Service Pack:    1_0
Product:    768_1
Files that help describe the problem:
C:\Windows\Minidump\050315-22869-01.dmp
C:\Users\Calvin\AppData\Local\Temp\WER-34928-0.sysdata.xml
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

Widows 7 works well for me with many versions of Photoshop. I would suggest the you make sure you have installed all the latest Device Drivers for all the devices you have on your machine the Photoshop may use. Display driver, Mouse driver, keyboard driver, Tablet driver, Printer driver and also make sure you do not have two different display adapters enabled on you system.

FPS drops when tapping anywhere on the screen

Have had this problem since I first started with mobile apps. Any solutions? I've searched thoroughly and can't find any answer.
I add an FPS displayer to the app to keep track of the FPS (btw, is capitalized FPS only used for First Person Shooter or also the Framerate?, should the framrate be "fps"?, alsways wondering that ). Wherever I tap the screen, the FPS drops. I don't even have to have any other code, so it's not even a button I tap. It can be in an empty black space and it just makes the game run slower. Even if I remove the FPS displayer and just add the smallest code needed to move an mc from the left side to the right and tap the screen fast while it moves, it moves stuttery and/or slows down. If the screen is not touched, it can take it 5 secs to go from left to right, if I tap the screen as fast as I can while it moves, it can take up to 8+ secs before it gets to the right side.
So, what's up with this slowdown when the screen is touched in Adobe Air mobile apps? Been like this since the very first Adobe Air/SDK version I used, and right now I'm using the latest one (3.7). And it happens both with GPU and CPU. If I don't tap the screen furiously, the stuff runs great and good framerate. In some cases it also slowsdown if I just hold the finger down on the screen and moving it around. But then it usually have to be on something, not just blank space.
I surely can't be the only one.

Bumping this thread. I'm building an AIR kiosk app (AIR 14.0 for Desktop, Windows 7 PC, Samsung LS24C770TS monitor), and am experiencing a similar issue as Tenchy.
If the user quickly taps any visible MovieClip (even MCs that don't have any touch event listeners) in my app, it causes severe lag in other touch events. Odd thing is that the frame rate is not affected by tapping fast, it's just that other touch events are delayed while tapping non-interactive MCs.
Referencing the thread below, I've tried both mouseEnabled = false and mouseChildren = false, on the non-interactive MCs. This doesn't fix the issue. The touch objects and non-touch objects are not deeply nested.
severe frame rate drop when touching screen iOS
Has anyone found a solution for this issue?

When Tape ends computer blue screens

Similar Messages

Maybe you are looking for