When testing speakers form the Sound mixer....no center channel so

I have a Sound Blaster Audigy MP3+ sound card, everything has been find up till now. When I test the speakers in the 5. configuration from the sound mixer the voice gives me sound out of each speaker except the center channel. I have updated the drivers etc.
I can hear sound through the center speaker but not during the test?
Any ideas?

this might help or maybe not.
has your sub got a setting for direct mode. if you have set it to direct, then check your setting in organizer/player.
eax, mixer, speaker settings.
john

Similar Messages

  • How do i use my apple express speakers as the sound from apple tv?

    how do i use my apple express speakers as the sound from apple tv?

    Welcome to the Apple Community.
    You can't with the Apple TV 2 or 3, with the Apple TV 1, you can choose them from the Airtunes option in the settings menu.

  • When I film something the sound isn't recorded... why?

    When I try to film something, the sound isn't recorded only the images. Does anybody know what is the problem? In the begginning it used to record everything but after I don't know what happened and when I play the movie in the top of the screen appears like a line showing the fragments of the whole movie and a bar goes passing over the images like a timeline....

    The same thing happens to me. But in my case my 12yr old son noticed that I cover the phone's speakers with my hands while filming, not that thats your case. I just thought to tell you cause its funny is all. Hope some one can assist you. Good luck.

  • I hooked up external speakers and the sound will only come out of 1 speaker

    I have an electronic karaoke system on my HP envy dv7 Notebook and I just bought 2 new Mackey Powered Speakers and a new Mackey ProFX12 mixing board.   I can only get sound to come out of 1 speaker.   How do I get the sound to come out of the Right and the Left at the same time? Thanks for any input or help you can provide.  

    You may have dust or a small object in your headphone jack. You can purchase cans of air from computing stores that can clear any dust that may be causing the problem. If that doesn't work then a larger object may have damaged part of the jack at which point it would be advised to visit your local Genius Bar and see what repairs they can offer. Try not to insert any other objects especially ones with sharp edges into the jack as this often creates further damage. Hope everything is working again soon.

  • I start running a java program and when i switch users the sound doesnt work

    When I start running a java program or leave a game running and i switch users the sound doesnt work. I have been searching around the web and nobody seems to have an answer. This just recently started to happen. Please if anyone has any ideas that would be much appreciated and the problem is my computer its almost brand new. And my computer is completely up to date.

    Sony Mobile team has a separate community which can be found here.
    If my post answers your question, please click on "Accept as Solution"

  • How do i fix the sound on an iPhone 4S? When i play music the sound bar at the bottom disappeared and when i try to adjust sound with the buttons on the side, nothing happens. Also the sound in my apps is not working.

    The sound isn't working. And it also does not appear, when i try to adjuct it with the buttons the sound bar doesn't appear and when i try playing music at the bottom the sound bar disappeared. How do I fix this?

    Basic troubleshooting steps clearly outlined in the User Guide are restart, reset, restore from backup, restore as new device.  Have you gone through ALL of these troubleshooting steps?
    If you have gone through all the troubleshooting steps and you're still having problems, you'll need to bring your phone into Apple for evaluation.

  • Does Paypal pmt finish processing when "testing" a form? (or is Paypal transaction only a "test")

    I am "testing" a form before I embed it into my website.   I have payment processing engaged. 
    ON the "test" form, I have filled out the form, moved to Paypal, filled out the credit card ino, and submitted for payment.  Yet the RESPONSE shows test with a test ID correspoding to the Paypal transaction.
    Will the paypal transaction go all the way through to Paypal? Or was that part only a test as well?

    To be more clear, for the test mode, although we go through the real PayPal payment process, we skip the payment finalization step, in which we actually tell PayPal to charge the form filler and move the money to your account in non-test mode. That is, no money movement will happen if you "test" a form.

  • When i trybto install the sound library iam ased yo login the password but it doesnt work. why?

    iam unable to install the sound library on my garageband because its not accepting the password. am i getting it wrong here? isnt it the apple id password that its askign for?if not then what other password? please help! urgent!

    You need the admin password you created when you first set up the machine.  Just about every installer running under OS X will require you to authorize the installation by entering an administrator password - even software update requires this.  You really should not forget your admin password, as it is required for many things in OS X since, unlike Windows, you often need to manually type in the admin password to proceed with an install or update (whereas Windows will take admin authority, if you are logged in as an admin, by simply clicking continue or yes).
    If you cannot remember your admin password, you can reset it from the recovery CD that came with your mac - http://support.apple.com/kb/HT1274

  • When I record audio the sound waves arent visible in the arrange page?

    When recording audio, The sound records fine but the visible wave is tiny to non existent. Any idea what I might have done to cause this as it wasn't always the case??

    Micah, look in the lower right-hand corner of the arrange window. Right next to the zoom horizontal and vertical sliders, there's a little wave icon. Clicking it will magnify the waves. How's the actual sound, Is it too quiet? What do your audio waves peak at?

  • When bouncing with logic, the sound gets really bad

    Hi,
    when I bounce a track with Logic 9, the sound turns real bad while when I'm recording it it sounds perfect

    Perfect sound goes bad quickly.
    Turn off the Normalize feature in the Bounce dialog.

  • HT1338 When will Apple fix the sound sync problem in PhotoBooth video?

    Suggestions online are
    (1) reboot with cmd/opt/p/r  This is not a solution but a temporary fix, a sign that Mountain Lion is not working well!
    (2) reset the sound config in Audio settings.  This works briefly, again a temporary fix.
    Isn't it time that Mountain Lion was working?

    so that means.. from itunes..or not from itunes?
    sounds like 3rd party music then..
    SO i would delete them from the itunes library and re add them to the itunes library.
    TO test this out you should delete ONE SONG or ONE ALBUM and test that ONE SONG or ONE ALBUM only to see if they sync to the device..
    are you using a windows or mac? Updated itunes?
    need details on the Configuration...

  • When Should I Correct The Sound Problems?

    I have a set of interview clips in an iMovie '08 project. Originally the video was recorded with two mikes, with one mike on each channel ( L and R). Unfortunately, on some of them, the mike level for one of my interviewees is much lower than for the other, which I need to correct. I also want to put the sound from both mikes onto both the L and R channels, instead of one on each channel.
    I have done all my splitting and transitions and titles all that stuff, and am ready to export the clips into a final movie. However, I need to sort out the sound problems.
    So - my question is this: is it better to fix the sound in iMovie '08 first, before exporting - and if so - what the best way to do this? Or should I export the movie, and if so, into what format, and how would I then edit the sound? I do own Final Cut Express but have never used it.
    Or... is there a better way than these [e.g. exporting into some other program BEFORE compiling into a final movie, and then bringing back into iMovie '08]?
    Thanks!
    Message was edited by: gbracegirdle

    Kanan, the difference you already know, blade .vs rack mount. There are some CPU differences, but not much. Both can be managed by UCSM in version 1.4.x
    So it really is ones preference on what you are using it for and how scalable you want things to be for future expansion.
    Blades: easy, as you can buy a chassis and have 2 blades in that one chassis and add blades as needed. If using boot from San, can get a server back up in minutes
    Rack mount: can take rack space more quickly, takes time to duplicate in case of a failed server
    Very small differences, but hope this helps to start the wheels turning.
    Good Luck!
    Sent from Cisco Technical Support iPhone App

  • Various types of sound out of center channel on

    So lets see, quicktime movie trailers, music in winamp, games,?MSN nudge sound, ?-they all come out all 5. channels (Z-5500s)?But the audio for flash movies I've had on my computer, some WMP videos, MSN new message sounds - these are all center channel only - and werent on my last system.
    another thing - if I change the audio settings under control panel to quadraphonic - they do come out all the speakers, back to 5....... center channel only. its very distracting and stupid to not be utilizing all the speakers for things like a video. whats the deal here? Thanks for the help in advance.

    apparently the issue might be that the X-Fi/console just plays mono encoded material through center only?
    i preferred when it utilized all the speakers for things like that anyways on my audigy gamer...
    is this the case?
    edit: CONFIRMED. I found the msn sounds, and haha the NUDGE IS STEREO and the TYPE is MONO. Explains everything! now to get Creative to fix it....
    Further:
    with CMSS3D off, mono will play over both R and L, just with no seperation of course. (but then your rears center will never be used by pretty much anything outside of games)
    with it On XPAND, it will play through center only. (4 not being used)
    with it on SURROUND, it will play through center and rears, but not front L and R. (the 2 most important ones arguably not being used)
    seemingly on my Audigy , all speakers would be used even for mono sources. So am I correct in guessing they changed things?
    All speakers should be used for mono sources.
    Can creative update this in a new driver?
    EDIT: ARG I just found out it only happens in "entertainment mode" at that! Game mode does 4/5 (not centre). What is the reasoning for this?Message Edited by deusfaux on 03-0-200609:2 PM

  • SharePoint Designer 2010 Error occurs when accessing Edit Form: "The server returned a non-specific error when trying to get data from the data source ..." This occurs when using "" in a calculated column in a SharePoint List

    I created a calculated column "Expiration Date" in SharePoint 2010 with formula, =IF([Contingent Hire]=TRUE,(Created+90),(IF([Contingent Hire]=FALSE," ")))
    This works in the SharePoint list but when I go to edit the Edit Form in Designer. I get the error specified in the title of this post. I'm trying to make it so the Expiration Date is blank when another column, "Contingent Hire" (a YES/No
    column) is FALSE.
    The Edit Form is essentially a DataViewWebpart. If I remove the " ", like so, "(IF([Contingent Hire]=FALSE,))" from the calc column, the error goes away; however, the Expiration Date field does not
    remain blank like I want it to.
    Does anyone have any suggestions? (Below is the error generated when I open Designer and then try to open the Edit form for the corresponding list containing the calc column)
    JackSki123

    Hi Jack,
    Could you provide a screenshot about this issue?
    As Dimitri suggested, you can install the update for your SharePoint Designer and check again.
    And you can also check if you can display "NA" instead of " " in your calculated column per the following post.
    http://rajeshspillai.blogspot.in/2012/03/server-returned-non-specific-error-when.html
    Thanks
    Daniel Yang
    TechNet Community Support

  • I accidentally left my phone unprotected during the rain. My phone got wet and when I got home the sound won't work and the next day it doesn't let me charge anymore. HELP!

    I went out to join the amazing race challenge in my work. When we were almost to the end, the weather changed and it started raining. I put my phone my my backpack and got wet along with my other stuff. By the time I got home, there's no more sound and it keeps showing "SLIDE TO TURN OFF". Then the next day, I can't charge anymore.

    You might consider a case like Otterbox or something similar for active events in outdoor use. They not only give good protection against drops but also protect from water. It's not meant to swim with take underwater pictures but really good for rain splatter or the situation you were in. Good luck.

Maybe you are looking for