When the airplane option is enabled, does it use a lot of megabytes?

There could be a possibility that I may move in the future to an area that doesn't get good 3G coverage. I understand that the airplane mode may boost the signal. I'm jut concerned that using said airplane mode may use a lot of mb's.

Oh, man, I feel truly stupid, lol. (I had read, unfortunately, after this post) in the owner's manual that the airplane mode is used for exactly the reason the 1st person to reply to this post had stated. Dunno, but some misguided apple tech or AT&T employee had told me that the airplane mode would boost a weak 3G signal.
Thanx, all, for your input.

Similar Messages

When the video OPTION for MUSIC is selected - The Music Video does not move

For a Movie, when the MUSIC option is selected, it does not move into the MUSIC library. It stays in the MOVIE category. It should to become a music video. How should it be done correctly?

Thanks

By default, the 3d interface & dialog opens when the 3d option is selected. i forgot the question HA

by default, the 3d interface & dialog opens when the 3d option is selected. (ya know, the grid on the artboard; 3d tools...etc...) I must have checked the box for it to never appear, because it doesn't appear and I'm not skilled enough with CC to operate Photoshop without it. My question is how would i enable this manually?

I've noticed on FF29 that the "Save and Quit" "Quit" "Cancel" Option has disappeared. The normal changing of preferences in Firefox about:config below won't work.
Type about:config into the address bar and press enter
Accept the warning message that appears, you will be taken to a list of preferences
Locate the preference browser.tabs.warnOnClose , if its value is set to false, double-click on it to change its value to true
Repeat this for these 3 preferences ''browser.warnOnQuit'', ''browser.warnOnRestart'' and '''browser.showQuitWarning''
To get the Save and Quit warning box back you have to Type about:config into the address bar and press enter
Accept the warning message that appears, you will be taken to a list of preferences
Right click on an open space in the preferences settings field and select a new Boolean and enter ''browser.showQuitWarning'' and click on OK, then make sure that it's set to true

How to gettext from textarea in a new line when the linewrap option is true

Hello everyone..
I wanted to know that how get we get text from the Jtextarea when the linewrap option is set to true..
for example..
Lets say my textarea can have 50 chars without any kind of wrap..
now when the 51 st char is pressed or entered it automatically goes to the next line..
now i want to get the text from the textarea and display it in the exact fashion as it is in the textarea..
Please help me out in this case..

This can help, if not, take a JTextPane. In my program,
I get all lines (including wrapped ones) with that
I hope, there are no indexing or so errors, I had to adapt my code
a bit.
View root =
myJTextComponent.getUI().getRootView(myJTextComponent).getView(0);
int number_of_paragraphs = root.getViewCount();
int linestart, lineend;
String line;
for(int paragraphindex = 0; paragraphindex< number_of_paragraphs;
paragraphindex++)
     for(int line_in_paragaph = 0; line_in_paragraph <
     root.getView(paragraphindex).getViewCount(); line_in_paragraph++)
     linestart =   root.getView(paragraphindex).getView(line_in_paragraph).getStartOffset();
     lineend=
     root.getView(paragraphindex).getView(line_in_paragraph).getEndOffset();
        try
        line = myJTextComponent.getDocument().getText(linestart,
        lineend-linestart);
        System.out.println(line);
        catch(BadLocationException e) {...}
}

When I open a file it normally opens in 12.5% stated on the header. For some reason, it now opens with 100+% on the header and is much smaller in size. How do I go back to the first option I noted? I use AP to work on blueprints for measuring so the accur

When I open a file it normally opens in 12.5% stated on the header. For some reason, it now opens with 100+% on the header and is much smaller in size. How do I go back to the first option I noted? I use AP to work on blueprints for measuring so the accuracy matters. Any direction would be greatly appreciated. Thank you.

Are the image all the same size the % files open into a document seems to vary with the number of pixels the image being opened has. Check the Image size.

How do I set up cloud on my mac when the cloud option is not listed in my system preferences?

how do I set up cloud on my mac when the cloud option is not listed in my system preferences?

Welcome to the Apple Community.
If iCloud isn't in system preferences you will need to update your operating system.
iCloud is part of iOS 10.7.2 or better.

By default, the 3d interface & dialog opens when the 3d option is selected. (ya know, the grid on th

by default, the 3d interface & dialog opens when the 3d option is selected. (ya know, the grid on the artboard; 3d tools...etc...) I must have checked the box for it to never appear, because it doesn't appear and I'm not skilled enough with CC to operate Photoshop without it.

I've noticed on FF29 that the "Save and Quit" "Quit" "Cancel" Option has disappeared. The normal changing of preferences in Firefox about:config below won't work.
Type about:config into the address bar and press enter
Accept the warning message that appears, you will be taken to a list of preferences
Locate the preference browser.tabs.warnOnClose , if its value is set to false, double-click on it to change its value to true
Repeat this for these 3 preferences ''browser.warnOnQuit'', ''browser.warnOnRestart'' and '''browser.showQuitWarning''
To get the Save and Quit warning box back you have to Type about:config into the address bar and press enter
Accept the warning message that appears, you will be taken to a list of preferences
Right click on an open space in the preferences settings field and select a new Boolean and enter ''browser.showQuitWarning'' and click on OK, then make sure that it's set to true

How do i "when the ACPI mode is enabled (by default) under Windows 2000. To fix the problem, replace the gpibpci.sys file on your machine" Where do i go to do this?

I keep getting an error message on the blue screen of death. Beginning dump of physical memory. To fix it a messgae board said "when the ACPI mode is enabled (by default) under Windows 2000. To fix the problem, replace the gpibpci.sys file on your machine with the one that is attached below and then reboot the machine." Where do i go to add this file?

I will get this error randomly, once when I was opening a file on another computer on my network, once when I was logging onto to my bank website on the internet, and another when I was searching through my d drive. Nothing to difficult, I do not even have other programs running when it happens sometimes. Thanks for any help!

My computer is loud when the fan is running. Does anyone have any suggestions?

My computer is loud when the fan is running. Does anyone have any suggestions?

Hello,
Get Temperature Monitor to see if it's heat related...
http://www.macupdate.com/info.php/id/12381/temperature-monitor
iStat Menus...
http://bjango.com/mac/istatmenus/
And/or iStat Pro...
http://www.islayer.com/apps/istatpro/

Why can I no longer use an image for my signature on forms? The only option I have now is "use a certificate". It was never like this until today.

Why can I no longer use an image for my signature on forms? The only option I have now is "use a certificate". It was never like this until today.

Hi,
I had never heard of someone using the iPhone Number as the ID in the iMessages account in the Mac version.
i.e without adding an Apple ID
iMessages does allow iPhone numbers and mine lists mine.
I would try this.
Sign Out of the iMessages account and Quit Messages
On the iPhone in Settings > Messages remove the Apple ID
Set the iPhone to Airplane mode for a few minutes (to break with the Server)
On starting the phone up again check the iPhone Number is ticked for iMessages.
If it is add the Apple ID
On the Mac restart Messages
Add the Apple ID
At this point you should get a pop up or two saying the iPhone is using the Number and Apple ID.
Accept these and they get added to the Receive At list and Send From drop down.
9:41 pm Monday; October 28, 2013
 iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

TS4009 Why am I receiving emails saying that I have exceeded my iCloud storage, when the methods above show that I am using 4Gb of the 50Gb I have paid for?

Why am I receiving emails saying that I have exceeded my iCloud storage, when the methods above show that I am using <4Gb of the 50Gb I have paid for?

The problem could be that you don't have enough storage on the device itself, not on iCloud. Go to Settings>General>Usage to see how much "Storage" you have available. Farther down the list is the available storage on iCloud.
Also check:
Go to Settings>iCloud>Storage & Backups>Manage Storage; there, tap the device you need info on and the resulting screen lists Backup Options with which apps store data on iCloud.
A device needs many MB of storage in order to perform a backup to iCloud.
Also see: http://support.apple.com/kb/ht4847

I tried to send a mail message to too many addees. when the rejection came back "cannot send message using the server..." the window is too long to be able to see the choices at the bottom of it. how can i see the choices at the bottom of that window?

I tried to send a mail message to too many addees. when the rejection came back "cannot send message using the server..." the window is too long to be able to see the choices at the bottom of it. how can I see the choices at the bottom of that window?

I tried to send it through gmail and the acct is a POP acct
I'm not concerned about sending to the long address list. I just can't get the email and window that says "cannot send emai using the server..." to go away. The default must be "retry", because although I cannot see the choices at the bottom of the window if I hit return it trys again... and then of course comes back with the very long pop up window that I cannot see the bottom of so I can tell it to quit trying...

Unable to sync new iPhone 4s. I have iTunes version 10.6.1. Using Windows 7. My device appears on iTunes but I am not able to select the sync option and it does not automatically start the sync option when plugged in. Ive tried reseting the device.

I am unable to sync my new iPhone 4s OR my iPod Touch 4 to iTunes.(this is the first time I am plugging them into iTunes) I have version 10.6.1. Both devices are up to date with the latest software version. Once I plug the device in, it is recognized on iTunes.The synce process does not start automatically. I am unable to select the sync option. I've tried reseting the device and restarting iTunes and the same problem happens. I have plugged in my husbands iPhone 3gs and the sync process starts automatically. I have also added my computer as an authorized computer for the new devices. What now?

Many thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

THe dock should appear (when hide dock option is enabled) while resizing

This is a suggestion
When the dock is hidden, and when one tweaks with options regarding it, it remains so. It should transiently appear while the modifications are being made, for easier tweaks.

Hi tito.is.human,
Welcome to the forums.
This is a peer to peer forum. If you want to send this suggestion to Apple I would recommend Apple's Feedback Webpage.
cheers,
-TT

How to change actual effort in project plan when Projected Actual option is enable in Project Server 2010

Hi,
We have enable "Protect User Updates" option from PWA->Task Setting and Display->Only allow task updates via Task and Timesheets, to protect actual efforts in project plan that PM changes manually, however in some cases we need to allow actual
effort changes in open projects so it there any way or workaround so that Administrator or PM can make changes in actual even though "Protect User Updates" option is enable. Please Help!!
Thanks,
Rahul

Hi Rahul,
Indeed when this option is activated, there is no way to directly update actual work in the project plan.
The workaround is to temporary deactivate this option, more preferly not during office working hours to avoid unexpected project updates.
A better workaround would be to ask the resource to recall, correct and submit again the timesheet, so the PM can approve an updated actual work. Finally the PM can use delegation to rscall and correct the timesheet for the resource.
Hope this helps.
Guillaume Rouyre - MBA, MCP, MCTS

When the airplane option is enabled, does it use a lot of megabytes?

Similar Messages

Maybe you are looking for