When the BT is enabled/disabled Satellite A300-U01 hangs few seconds
I have Satellite A300-U01... there is one problem sometimes when I ENABLE or DISABLE Bluetooth device in my laptop, the laptop hangs for 3 or 5 seconds and if some song is playing it hangs and make strange noise for 3 or 5 seconds then become normal...
Maybe some active background process is responsible for this.
Do you still use preinstalled Antivir application?
Have you noticed HDD activity (blinking HDD LED) while hanging?
To be honest o don't believe this hanging issue has something to do with BT.
Similar Messages
-
How to add CD/ Tapr Drv when the system is enable
Sir is there any body who will help me to solve the problem that when the system is enable and I want to attach the CDROM & Tape Drive to the system what i have to do
Hello,
depends on the system and OS version.
If the CD-ROM and tape-drive are SCSI (on separate channel from the system disk), just attach them and issue devfsadm -C disks; devfsadm -C tapes (Solaris >= 8) or drvconfig; disks; tapes (Solaris < 8)
If the CD-ROM is IDE, impossible without restart !
Anyway review the manpages for the above mentioned commands.
Michael -
I deleted my old email address and added a new one, after my iPhone died iCloud keeps popping up asking for the password of my old email address. I can't remember my password and the account is still gone, it pops up every few seconds. How can I fix this?
If you are unable to remember your password, security questions, don’t have access to your rescue address or are unable to reset your password for whatever reason, your only option is to contact AppleCare(or Apple ID Support), upon speaking to an operator you should explain that your problem is related to your Apple ID, this way you will not be charged for assistance, even if you don’t have an AppleCare plan.
The operator will take you through some steps you may have already tried, however they need to be sure they have exhausted all usual approaches before trying to reset your account, so you should try to be helpful and show patience with the procedure.
The operator will need to verify they are speaking to the account holder and may ask you some questions that only the account holder could know, and you will need to answer them if the process is to proceed.
Once the operator has verified your identity they will send a message through to your device which contains an alpha numeric code, which you will need to read back to them.
Once this has been completed they will send an email to your iCloud email address after a period of 24 hours, so you should check that mail is enabled in your devices iCloud settings.
Upon receipt of the email, use the reset link provided to reset your password, after which you should be able to make the adjustments to iCloud that you wish to do. -
I am using apple iPod-suffle model,I am unable to upload music into iPod and 3 lights(green,orange and red) keeps blinking for few seconds when I connect my iPod to my PC and after few seconds its turn to unresponce mode,Plz help to find out solution.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
for the iphone4, my light is on all the time! the light is supposed to turn off after a few seconds of use. how can i fix this?
If what Allen says does not fix the issue I have seen this as a Hardware issue and I would get into an Apple Store if it is close by
http://concierge.apple.com/reservation/us/en/ -
I bought and downloaded a few song on iTunes. Now I see that some of the songs were not completely downloaded and stops a few seconds into the song. I went back to the album but it does not give me an option to re-download. What do I do so that I can down
Just found the answer - if you have the sam problem look here for the answer:
https://discussions.apple.com/thread/5769424?tstart=0 -
Hello,
My Wi-Fi doesn't work good. After a while it doesn't work and then I've to turn of the Wi-Fi and turn it on after a few seconds. Does anybody has this same annoying problem?
Jelle van Blokland.Hi Jelle van Blokland,
Here is an article that has troubleshooting for Wi-Fi connections in iOS, including disconnecting:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Cheers!
- Ari -
Please help
I accidently pulled the cable out when syncing. Now my ipod automatically restarts. What do i do?OK, in that case a restore should fix things:
Disconnect the USB cable from the iPod touch, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release only the Sleep/Wake button.
Continue pressing and holding the Home button while you reconnect the USB cable to the device. The device should turn on.
Note: If you see the "low battery" screen, let the device charge for at least ten minutes to ensure that the battery has some charge, and then start with step 2 again.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears (iTunes icon and USB connector) release the Home button.
If necessary, open iTunes. You should see the "recovery mode" alert ("iTunes has detected an iPod in recovery mode").
Use iTunes to restore the device.
If you do not see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links. -
Firefox is gisteren beginnen raar doen, je opent de browser, de startpagina komt er 2 seconden op, en dan verdwijnt die, ik krijg dan een wit scherm, en het is zo bij elke pagina die ik open, (facebook, youtube....) Wat kan dit probleem zijn?
Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
* On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you. -
I have two related problems with keywords in iphoto 11. Sometimes, keywords get magically "broadcast" to every photo in an event or album. It's difficult to delete these keywords. If I select one and try to delete it it vanishes. About half the time, it reappears again either in a couple of seconds or after I go to another photo and then return to the previous one. When thios happens, I need to delete the keyword two or more times before it actually vanishes. With several hundred photos in an event that all have a bad keyword, this is a tedious process. I've tried rebuilding the library once, but with only the first (I think) option checked on the rebuild.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD -
Contact is available when i sign in,then changes to unavailable after a few seconds
When I sign in to Skype,one of my contacts appears available,but then changes to unavailable after a few seconds,although this time varies too. What makes this happen?
This page explains the method for restoring from a backup without having the sync process delete your calendars:
http://www.wilmut.webspace.virginmedia.com/notes/icloudtm.html -
Why is it when i open my iTunes app it closes after a few seconds
When i go to go onto my iTunes app it loads for a few seconds and then it closes taking me back to my homepage?
Apps crashing
See:
iOS: Troubleshooting applications purchased from the App Store
Contact the developer/go to their support site if only one app.
Restore from backup. See:
iOS: How to back up
Restore to factory settings/new iPod -
I was attempting to play itunes through my receiver with my itouch 4 the 1 st song started and stopped a few seconds later so I powered off my itouch and the clockwise circle has ben spinning for close to 1/2 hour any suggestions as how to get the thing back to normal...............
I was attempting to play itunes through my receiver with my itouch 4 the 1 st song started and stopped a few seconds later so I powered off my itouch and the clockwise circle has ben spinning for close to 1/2 hour any suggestions as how to get the thing back to normal...............
-
The Superdrive on my MacBook Pro ejects audio CDs just a few seconds after inserting them. This happens both with original audio CDs I have bought in music stores AND with audio CDs I have recorded myself, on the very same computer, via iTunes. The same does NOT happen with data CDs (e.g., stuff in mp3 format), which are read just fine. This behaviour started a couple of weeks ago, until then everything had worked just fine for years. I am running iTunes 11.1 under Snow Leopard 10.6.8. Any idea?
FabrizioYou could also try a SMC reset:
Resetting the SMC (System Management Controller) on Intel-based Macs:
http://support.apple.com/kb/ht3964 and
http://support.apple.com/kb/HT1237?viewlocale=en_US -
How to find the button is enable/disabled by sql coding
Hello friends,
How can i find a button is disabled or enabled state by plsql coding ?
I have a requirement to ckeck out the user try to close login window without click out button..I should make a warning message to user when he try to close window improperly..Pls help meHi
ur requirement is not clear...
How can i find a button is disabled or enabled state by plsql coding ?
IF ur_condition THEN
SET_ITEM_INSTANCE_PROPERTY('BLK_NAME.ITEM_NAME',NAVIGABLE,PROPERTY_TRUE);
ELSE
SET_ITEM_INSTANCE_PROPERTY('BLK_NAME.ITEM_NAME',NAVIGABLE,PROPERTY_FALSE);
END IF;
REgards,
Abdetu..
Maybe you are looking for
-
AIA SERVICE CONSTRUCTOR, CREATION OF REQUESTER AND PROVIDER ABCS
While the creation of requester ABCS using service constructor we need to give the xsd location and all input fields, But in the creation of provider ABCS we have an extra field for selecting WSDL file, if we select the wsdl it'll automatically fills
-
Implementing Badi for additional tab page & creating views in cProjects 3.1
Hi, I am implementing DPR_ADD_SAP_TAB_I for adding new tab page in Cprojects 3.1. Please tell me whether we have to create any veiw? if it is please tell me the procedure & steps
-
Mac OSX 10.8.5 with M-Audio ProjectMix I/O
I recently purchased an M-Audio Project Mixer from eBay to record acoustic drums. I am using a MacBook Pro with OSX 10.8.5...only to discover that the PM is not compatible with OSX 10.8.5. I've researched for the latest driver uploads and firmware to
-
Adding a new VM to a Delivery Controller in Citrix XenApp 7.5
Hi Guys I have a Citrix site that has a Machine Catalog setup and a Delivery Group set up that sees the machine in the Machine Catalog. I have recently added a new server with a slightly different set of applications etc, I have been able to add the
-
Abap run time during combined delivery
hi i created three sale order x,y,z.i want to do combined deliveryusing vl10A.but system showing run time error.combined delivery criteria is correct. what i do with regards dinesh