When the error list is open, my LabVIEW 8.2 slows down dramatically.

When the error list is open, my LabVIEW 8.2 slows down dramatically. I am also using a project window and LabVIEW DSC with shared variables. Has anyone seen this before and is there a fix.
Thanks,
Sean
Message Edited by SeanWat on 01-04-2007 01:47 PM

While using 7.1 on a very old, slow, broken computer I experienced a slow down while my complex VI was running and my error window was open. I also experienced a similar slow down when I opened pretty much anything on that computer...
Are you operating on a very old, slow, and broken computer? Or perhaps you are experiencing a memory leak?

Similar Messages

I bought an eBook from iTunes. I can view/read it perfectly on my iPhone but when I try to open the eBook file on my iPad, I get the error message, "Cannot open book. This book is protected by an incompatible technology." Any ideas for me? thx

i bought an eBook from iTunes. I can view/read it perfectly on my iPhone but when I try to open the eBook file on my iPad, I get the error message, "Cannot open book. This book is protected by an incompatible technology." Any ideas for me? thx

Welcome to the Apple Community.
I have seen previous versions mentioned in a pop up message before on iCloud.com, but I'm not really sure at all how it would help, as I couldn't get it to do anything.
The best advice I have at this time is to back up your work on your iOS device by regularly saving it to iTunes, if anything goes wrong you can then either load it into the numbers app again on the device or recover it via iTunes on your computer.
My syncs are immediate, I never get chance to see if it works in the background, sorry.

Is my HD Dead? Reformat Disk Utility Error: secure disk erase failed with the error could not open disk.

Hi,
Fed up with seeing the spinning beach ball I decided to reformat my MacBook Pro...
After backing up everything on an external hard drive I put in the OSX install DVD, restarted the machine and held down 'C'.
I followed the install prcedure, clicking next a few times etc...
I then went into Utilities > Disk Utility. I chose 7-Pass to erase the Macintosh HD and set it off erasing.
I checked the process an hour in and message on screen read:
Secure disk erase failed with the error:
could not open disk
The internal hard drive no longer exists in the disk utility so I cant retry erasing it.
The only thing that appears in disk utility is the OSX install DVD.
I can't even shut down the mac as everything under the apple tab is greyed out!
I'm guessing this means my hard drive is broken right?
If anyone has any other ideas of what to try I'd really appreciate that.
How do I turn the machine off?
If my hard drive is gone then should I consider getting an SSD drive?
Any recommendations for such a drive would be great.
Hope you can help!

Did you partition the drive?
Extended Hard Drive Preparation
1. Open Disk Utility in your Utilities folder. If you need to reformat your startup volume, then you must boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger or Leopard.)
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Click on the Options button, set the partition scheme to GUID (only required for Intel Macs) then click on the OK button. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Steps 4-6 are optional but should be used on a drive that has never been formatted before, if the format type is not Mac OS Extended, if the partition scheme has been changed, or if a different operating system (not OS X) has been installed on the drive.

Getting an error in the preview but no errors or warnings in the error list

I've got a SSRS report, originally written using SQL Server 2005, that I just upgraded to SQL Server 2012. I'm using the SQL Server Data Tools that you're supposed to work with now. I had to change the query and remove one of the fields returned by one of
the datasets in the report. I had some problems, but have worked through it.
Now I can run the application, if I specify my .RDL file as the starting item. However, within the SSDT development environment, if I try to preview the report I'll get the following:
"An error occurred during local report processing.
An error occurred during rendering of the report.
An error occurred during rendering of the report.
Index was out of range. Must be non-negative and less than the size of the collection.
Parameter name: index"
But the Error List shows no problems at all. Everything is fine. Everything works. And yet, there's nothing in the preview except for the error messages I've listed above.
So, how can there be "no errors, warning or messages" and yet there's nothing to be seen in the preview? And why does it work when I run it in SSDT?
Rod

Hi Rod,
It's probably caused by data caching in the designer. When you changed the query and remove one of the fields returned by one of the datasets in the report, the dataset definition has been changed, but the actual cached data stored by Visual Studio (i.e.
the *.rdl.data file) still has data based on the old Dataset definition when reprocessing the report. This is in internal error caused by the mismatch between the data the report is expecting and what has been cached.
In this scenario, we can delete the *.rdl.data files from the drive, hit the "Refresh Fields" under the dataset properties for my dataset, then try previewing again.
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
If you have any feedback on our support, please click
here.
Katherine Xiong
TechNet Community Support

Hi on MAC OSX 10.7.4 update on Aperture 3.3.1 has been done, still gget the error message "By opening the databank for the Mediathek „~/Pictures/Aperture Library.aplibrary" is an error" is anybody out there to help me?

Hi on MAC OSX 10.7.4 update on Aperture 3.3.1 has been done, still gget the error message "By opening the databank for the Mediathek „~/Pictures/Aperture Library.aplibrary“ is an error" is anybody out there to help me?

Alex,
did you just upgrade from an Aperture 3.2.x version to Aperture 3.3.1? This error message usually occures after the upgrade to 3.3.1, when Aperture cannont convert the library format to 3.3. format.
I'd try to repair the Aperture Library (Mediathek), before upgrading it. Hold down the option-command key combination (⌥⌘) while double-clicking Aperture. This will bring the "Aperture Library First Aid Tools" panel forward. Select "Rebuild Database" and see, if it will resolve the the problem.
Good luck
Léonie

I carnt hear my message tone,the sounds it makes when the phone locks and opens.Also i am unable to hear my music playing from my phone but my alarm and ringtone are working.Can anyone help

i carnt hear my message tone,the sound it makes when the phone locks and opens,also i am unable to hear music when playing from my phone but my ringtone and alarm tone work.Ive made sure the silent button is not on,and the volume button on the side of the phone is just showing it blank instead of it going up and down.To try and fix this i have reset my settings and restored my phone,but now its just skipping the music i have purchased from itunes when in a docking station which is now another problem i have as well.Can anyone help????

Hello dbrookes,
Thank you for using Apple Support Communities!
It sounds like even though the Mute switch is not on, sounds are not making the, well, sound they should, and the volume buttons make a blank volume indicator appear on the screen that does not show the volume level.
I wanted to recommend a couple of things.
First, I would reset the phone:
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
From: iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
If that does not resolve the issue, then you may want to try backing up to iTunes, and restoring the iPhone again but this time do not restore the backup and set it up as new to see if the issue persists without the previous configuration.
Just incase you need it, this article will help with that:
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
Cheers,
Sterling

My laptop beeps every time I open it, then when the Windows is already open a message window asking

My HP Compaq Presario Q40 CQ40 beeps everytime I open it, the when the windows are already open and i click an icon a message window appear asking me if I want to delete the said icon even if I dont want to delete it, when i click the no id does not disappear, itjust come keep on coming out as if it want to send the contents all to recycle bin..pls help I really dont know what to do, and by the way my battery needs replacement too and i haven't bought a new one yet.

I read online about a "clean reinstall" of firefox which seems to have worked! They should include direction on this on their page: https://support.mozilla.com/en-US/kb/Firefox+crashes+when+you+open+it

TS3694 I keep getting the error message "-42408" and all of my apps got deleted on my iPhone. It says that I need to authorize my computer, so I tried than and that's when the error message showed up. I'm pretty ****** and want my apps to be back on my iP

I keep getting the error message "-42408" and all of my apps got deleted on my iPhone. It says that I need to authorize my computer, so I tried than and that's when the error message showed up. I'm pretty ****** and want my apps to be back on my iPhone. Please help.

What version of iTunes are you using? The error you references seems to be connected with iTunes 9.0.4. That version of iTunes is not compatible with iOS 6. You need to update to the current version of iTunes.

Server 280R is showing the error can't open PAM library

Hello Guys,
Please help me to overcome this error .server is showing the error can't open the PAM library contact system administrator.i heard that i have to install one package to fix this problem that package is SUNnspr.but this package i am not getting any where from sun site .so kindly any body can help me what to do now.shall i install the os again or any other process is there.and the server is also not booting.
Its very urgent

Try searching for SUNWnspr in your Solaris CDs / DVD. Its there. Once you find it, use pkgadd to install the package and if you have access to sunsolve, apply the latest nspr patch (I think this patch available for SunOS 5.8 in patch 119209-11, for SunOS 5.9 in patch 119211-11, for SunOS 5.10 in patch 119213-11, for SunOS 5.9_x86 in patch 119212-11, for SunOS 5.10_x86 in patch 119214-11).

How to make the LV front panel controls the current value through the program is set as the default value when the next time you open?

How to make the LV front panel controls the current value through the programis set as the default value when the next time you open?
1110340051

Try this: Re: How to make a VI remember the latest control value?
Jim
You're entirely bonkers. But I'll tell you a secret. All the best people are. ~ Alice

My Photoshop elements 11 and 13 organizer suddenly exits. photoshop elements is not responding. Message occurs when the error is found. solicit help

My Photoshop elements 11 and 13 organizer suddenly exits. photoshop elements is not responding. Message occurs when the error is found. solicit help, That's all.

We really cannot know. So far you haven't told us anything about your system nor is there any feasible way to diagnose what this "missing file" could be, no matter what. That is, short of elaborate tracking and observation using specialised system diagnosis tools. The welcome screens can be brough back via the Help menu, but well, this might bring back the problems as well. Anyway, this is most likely nothing that a forum can help you with. If you know a computer geek, give him a call. Otherwise I don't see what we could do for you.
Mylenium

How can I correct the error Write Permission Open so that I can finalize a project in I Movie?

How can I correct the error Write Permission Open so that I can finalize a project in I Movie?

Post in the iMovie forum.

Internet Explorer Branding failed due to the error listed below Server 2012 R2

After upgrading my AD and 1 DC of my two DC's to Server 2012 R2 I am seeing the error.
Internet Explorer Branding failed due to the error listed below.
The specified procedure could not be found.
This is because the Group policy "Internet Explorer Branding" is defined.
All discussion groups I have been able to find, suggest going onto the Windows 2008 R2 DC and use GPEDIT to remove this policy. Unfortunately, it does not appear where it should.
How do I delete it?
Thanks

Hi Paul S I,
Please notice that for managing IE10
with Group Policy Preferences you need
to use a Windows 8 or Server 2012 DC.
For proxy server
and proxy exception setting GPO setting, you can follow
below post in our team blog to move the policy to GPP.
How to apply IEM
to IE10
http://blogs.msdn.com/b/asiatech/archive/2013/07/01/how-to-apply-iem-to-ie10.aspx
In the windows 2008R2,
Internet Explorer 10 option won’t be displayed under the Preference->Control Panel Settings->
Internet Settings.
In addition, it would be helpful for further troubleshooting if you could collect the following information:
What version of IE that you are using? In the above solution, we suppose you are using IE10.
Could you provide the screenshort to provide detailed information?
Regards,
Lany Zhang

What can i do when the error -42110 appears? help!!

what can i do when the error -42110 appears? help!!
i've just updated my itunes and then this error's appeared!

I had the same problem, another community member told me that i had find the 'SC info' folder and i had to delete it. The folder was hidden so i couldn't find it. So if you can't find it go to Folders and Search Options and click on the View tab and under Advanced setting under "Hidden Files and Folders" check the 'Show hidden files, folders and drives' option.
Then type the following location on your address bar:
C:\ProgramData\Apple Computer\iTunes
Then delete the SC info folder and restart your computer.
This solved my problem.
Hope this solves yours.

How do I get rid of the Not Using SoftArtisan File UP notice that is slowing down my uploads to class where I teach?

How do I get rid of the Not Using SoftArtisan File UP notice that is slowing down my uploads to class where I teach? A notice now appears every time I upload an image to class as an attachment that says, Not Using SoftArtisan File UP, and this appears to be slowing down my uploads tremendously. I want to get rid of this. I never used it before and don't need it and don't want it. I just want the uploads to work like they did before this idiotic notice started slowing things down.

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
* On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

When the error list is open, my LabVIEW 8.2 slows down dramatically.

Similar Messages

Maybe you are looking for