When the keyboard is unplugged I get "Error 1962: No Operating system found."

I have a new Lenovo ThinkServer TS130 1105B2U. It has a Core i3-3220 and 4GB of memory. SATA 0 and SATA 1 each have a 250GB HDD configured to mirror each other using RAID1. I just finished installing Windows 7 Pro and drivers. However, I have discovered that when I try to reboot the machine with my USB keyboard disconnected I get "Error 1962: No operating system found. Press any key to repeat boot sequence." When I reconnect the USB keyboard and reboot the machine, Windows 7 Pro boots like expected. Why can't it find the operating system if the keyboard is unplugged?

This is fixed in BIOS version 20B.
You can use the following link to update BIOS from witin Windows.
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/thinkservers/bios_ts130_51a20b.exe
The Readme is:
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/thinkservers/ts130_51a20b_windows.txt

Similar Messages

"ERROR 1962: No operating system found." After installing ESXi 5.5 successfully.

I just installed VMware vSphere esxi 5.5 hypervisor on my lenovo think-center machine with config: i5, 3.2gHz, >300gb SATA HDD, 6GB ram. However after successful installation I receive "ERROR 1962: NO OPERATING SYSTEM FOUND". I've tried 'formatwithmbr' and tweaking some of my BIOS setting like changing boot mode to legacy,auto and UEFI one after another, putting boot preference for HDD first etc. But none seems to work. I think BIOS and its settings are completely ineffective when it tries to boot, and I am not even taken to the esxi 5.5 hypervisor menu. Kindly help.
PS- The machine had windows server 2012 as running OS while installing esxi 5.5.

Dear rachitt_23
1. May I know what machine are you using?
2. Check whether Intel VT Technology is Enabled?
3. Even if the boot mode is set to Auto, check that it is configured to Legacy first.
Peter
ThinkPad W520 (4284-A99) | ThinkCentre E73 SFF (10AU-0040SG) | i9300 - CM11 / GoogyMax 2
Give kudos to reward people for their assistance | Mark the thread solved if the solution works | Direct e-mail regarding technical problems will be ignored
=====================================
Dolby ; IdeaPad Slate Tablet ; Equalizer APO

H520s Error 1962 No operating system found

Hi, I have a Lenovo H520s, and two problems just appeared. First of all, it started to show "Start PXE over IPv4," then after waiting for a while "PXE-E18: Server response timeout. Start PXE over IPv6" would appear. A little bit later, the computer simply shows "Error 1962: No operating system found."
I went into the BIOS and I have Boot Mode set to "Auto" with UEFI first. I don't know where to go from here.
I recently used IOBit Uninstaller to uninstall all the software for my Epson WF-3540 scanner/printer and then reinstalled everything, and my only theory was that IOBit uninstaller deleted something that it should not have. This is probably the first time I have turned the computer off and on again since then.
Does anyone have any ideas? Thanks.

Dear rachitt_23
1. May I know what machine are you using?
2. Check whether Intel VT Technology is Enabled?
3. Even if the boot mode is set to Auto, check that it is configured to Legacy first.
Peter
ThinkPad W520 (4284-A99) | ThinkCentre E73 SFF (10AU-0040SG) | i9300 - CM11 / GoogyMax 2
Give kudos to reward people for their assistance | Mark the thread solved if the solution works | Direct e-mail regarding technical problems will be ignored
=====================================
Dolby ; IdeaPad Slate Tablet ; Equalizer APO

B540p error 1962 no operating system found

i have had nothing but problems with this model since day 1. i upgraded to windows 8 and have suffered all of the associated symptoms that everybody else is suffering..
today is the last straw.. i have an error 1962 .. no operating system found..
i have been overly patient.. fixing this brand new machine has taken alot of time and effort...
why should i already have spent all this time on a brand new machine..
there is only help on here from other frustrated users. i find this incredible for a machine that cost over 900 pounds..
lenovo have had very little in the way of advice to their customers on here over this machine..
the answer to this problem nay have been very easily solved..
THERE SHOULD HAVE BEEN A VERY BIG WARNING SENT OUT WITH THIS MACHINE..
NOT COMPATIBLE WITH WINDOWS 8... BUT HEY WHO WOULD HAVE BOUGHT THE MACHINE THEN???
I HAVE A BRAND NEW MACHINE THAT SIMPLY DOESNT WORK...
AND WITH WINDOWS 8 UPGRADED ONLINE.. WINDOWS 7 IS GONE FOREVER..
SURELY ITS TIME TO ASK FOR A PRODUCT RECALL..
the worst thing about buying this is that I dont even know if I would have had the same amount of problems if I hadnt upgraded to windows 8... lenovo seem to be hiding behind this issue.. its a windows 8 problem , not lenovo, or its a store problem, they are the ones who said it would be compatible...
I saw nothing from lenovo to say , dont upgrade..
this machine simply doesnt work and its surely time for lenovo to do something about it.

Edit : saddly the crappy message came back. It seems that indeed it's a connection matter. When it reconnects the HDD correctly, sometimes it messes up with the boot sequence so this is why I could "repair" somemthing.
Waiting for the SAV.
Hi there, I felt on that topic today since the brand new Lenovo B540 computer of my wife gave us that deadly message.
Well .. I have been able to make it work (so I think, I don't trust that computer anymore)
So, I registered in order to share what I did :
First of all I created a bootable usb key with http://www.ultimatebootcd.com/
In that little jewel I used Parted Magic (in the first page, third from the bottom) to realize that "hey, the HD is actually HERE !!" I could see the files modify them etc ..
But since I ain't no expert I haven't been able to use the tools to change something. However, I could see that something was wrong with the boot sequence, that the letter of my hardrive was on D:\ and the booting was on some weird Lenovo partition... So, I said to myself : Well, lets find a way to place back the boot on the D:\
I then created a Recovery CD from my Win7 64bit personnal installation.
To create such a CD, place an empty CD in your burner :
Start menu -> Run -> recdisc -> choose the letter of your CD/DVD burner -> create
Then I booted on it (you must the *Boot Priority: [Auto].)
After a decade of loading, the windows 7 recovery system found a Boot error and asked me if I wanted it to be repaired. Of course, I said "YES, f...k YES !!" .. and, of course, it didn't work . . .
But, interesting thing is, after the fix failed, I had some options like restore previous versions etc etc and "DOS Line codes (or something like that, it pops up a CMD line comands window).
And then the real deal started :
I placed myself on the correct letter -> D:
Then that line of code : BootRec /RebuildBcd
After two decades of works, it asked me if I wanted the D letter to be added back on the boot list. Of course, I said "YEEEEEEEEEES" while crying my soul out, and then, of course, it made me an error ...
After a 10 min of curses that you don't want to hear, I then typed : BootRec /fixboot
And it worked.
I rebooted on the Windows CD recovery who of course found one more time the Boot issue, and when I asked for it to repair that error : IT F... WORKED !!
I rebooted 3 times the PC just to be sure, turned it off 2 times, everything SEEMS to be fine.
So, I share that with you now, because all the way I used I found it here and there on this forum !
Hope it helps

ERROR CODE 1962 - NO OPERATING SYSTEM FOUND

My B540 continues to experience intermittent problems with Error Code 1962-No Operating System Found. Sometimes the computer will run correctly for 3 or 4 days, other times for just an hour, but in the end it repeatedly locks up and will not reboot. If I check the Bios Setup immediately after this happens, it says that there is no HDD. However, if I wait for an hour or two with the computer off, it will boot.
1. The logical explanation is that the HDD is faulty, but that is not so in this case. In addition to the HDD that came with the computer, I have tried two other HDDs, both brand new, never used, and both with fresh Win 7 installs. Both of those ended up with the same Error Code 1962. There is no way that all three HDDs could be defective.
2. I removed and reseated the memory.
3. I ran extensive diagnostic tests on the memory; it tests OK.
4. Someone suggested plugging the HDD SATA cable into a different SATA connection, but the B540 only has two connections (one for the HDD, one for the optical drive). I swapped those two, but still got the error code.
I have to believe that the problem is with the motherboard. I have noticed on the forum that other people are experiencing the same 1962 error code; has anyone found a working solution?
Thanks!

Ah, bummer. Thought maybe I was onto something...
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

TS130 ERROR CODE 1962 - NO OPERATING SYSTEM FOUND

Lenovo TS130 Ubuntu Server 14.04 Error 1962: This error occurred during the installation of Ubuntu Server on a hard drive that was completely deleted and then re-partioned using "use entire disk" option in the installation menu: No operating system would start regardless of the BIOS settings such as UEFI, legacy, auto; quickboot; etc.
The solution was to update the BIOS to the latest version from the Lenovo website and then enable the new securboot feature in the BIOS menu.
For the TS130, this was accomplished by burning the BIOS update on a CD after downloading for the system from the Lenovo website and then updating the server via the CD and on-screen prompts.
The optimize BIOS defaults was selected from the Exit menu in the BIOS settings to set everything back to original before the update was run.
Then the CD drive was moved upwards above the hard drive under primary in the boot menu to run the BIOS Update CD at boot.
Afterwards, there will be additional options in the BIOS menu which is where the solution lies. There is a new option below the "load optimal defaults" which is new from the BIOS update and named optimize operating system defaults. Selecting this will bring up prompts asking about enabling securboot and such but if everything is enabled, the system started Ubuntu Server 14.04 without issues.
Moderator Note; subject edited; post moved to here

Ah, bummer. Thought maybe I was onto something...
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

I downloaded songs to my phone at xmas and when i plugged in to my laptop it wiped the phone of new purchases when i try and download them to my computer in itunes via previous purchesses it wont load the list and i keep getting error 10053 can any1 help

i downloaded songs to my phone at xmas and when i plugged in to my laptop it wiped the phone of new purchases when i try and download them to my computer in itunes via previous purchesses it wont load the list and i keep getting error 10053 can any1 help

Syncing shouldn't trouch you photos unless you have photos in a Photo Library album. These would be photos that were synced to your phone from your computer. If you do have any, you'll need to use an app like PhotoSync to transfer them to your computer prior to syncing.
If you prefer to backup your camera roll photos prior to syncing, open iTunes and go to Preferences>Devices and check "Prevent...from syncing automatically". Then connect your phone to your computer and import them as explained here: http://support.apple.com/kb/HT4083.
Then, to minimize data loss, follow the steps in this user tip: https://discussions.apple.com/docs/DOC-3141. To follow the steps, first open iTunes and go to View>Show Sidebar. Also, Transfer Purchases is now located in File>Devices.

When I select "Convert" using the Adobe PDF conversion - I get "Error signing in"

When I select "Convert" using the Adobe PDF conversion - I get "Error signing in"

You need the CreatePDF forum

TS1718 I tried to update, did not work, unintstalled did not work. Now when I try to install i get error message "The feature you are trying to use is on a network resource tha is unabailable. Looking for itunes64.msi path.

I tried to update, did not work, unintstalled did not work. Now when I try to install i get error message "The feature you are trying to use is on a network resource tha is unabailable. Looking for itunes64.msi path.

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Update my iphone 4 and when I go to restore I get Error -50, let me know as I do that without asking for the support that made itunes

update my iphone 4 and when I go to restore I get Error -50, let me know as I do that without asking for the support that made itunes
currently I have no information on the phone and I need contacts urgeten

If the previous owner bought the apps then they would have to be updated using his/her account. The apps are not yours. You would need to buy your own.

IPAD2 - When i update my apps i get error message 1004.

IPAD2 - When i update my apps i get error message 1004. OS is actually 4.3.5.
Still get error when i connect thru pc.
I have powered off and retried - still fails to update

This seems to work for some users ...go to Settings>Safari>Clear History, Cookies and Cache. Restart the iPad. Hold down on the sleep button until the red slider appears and slide to shut down. Hold the sleep button until the Apple logo appears to power up again.
Then try again.

HT1199 when attempting to empty trash i get error code of 8003

when attempting to empty trash i get error message 'the operation cant be completed because of unexpected error occured error code 8003'
thanks!

http://www.thexlab.com/faqs/trash.html
27" i7 iMac 10.6.8 , Mac OS X (10.7.3), G4 450 MP 1.5 GB RAM w/(10.5.8/10.4.11/9.2.2)

I have created a slide show with pictures and music in Iphoto and when I try export it I get Error You do not have sufficient permission for this operation.

I have created a slide show with pictures and music in Iphoto and when I try export it I get Error You do not have sufficient permission for this operation. Try to export to an external HD attached, all help would be gratefully received

Have you ever successfully saved anything to that external drive? My first two thoughts are that the drive isn't formatted for the Mac or that you don't have rights to save to the drive.

I get error message''one file not found'' when tring to sync Ipod Nano 6th gen to I tunes. Help

I get error message''one file not found'' when tring to sync Ipod nano 6th gen to Itunes. Help

See:
iTunes cannot sync... apps not determined installed on...: Apple Support Communities
installed apps could not be determined...: Apple Support Communities

Prompted to upgrade iTunes on computer. Won't let me and get error message MSVVR80.dll not found. Attempted to reinstall, won't let me. Can you have iTunes and iCloud on the same computer?

Prompted to upgrade iTunes on computer. Won't let me and get error message MSVVR80.dll not found. Attempted to reinstall, won't let me. Can you have iTunes and iCloud on the same computer?

Try following the instructions of tt2 in https://discussions.apple.com/thread/5822086

When the keyboard is unplugged I get "Error 1962: No Operating system found."

Similar Messages

Maybe you are looking for