When the new drivers Win7 64bit for Y400 will be released?

I use n/b Lenovo Y400. I followed the link below and it wasn't worked. I still can't use wireless, bluetooth, camera, sound, USB and software Easy Capture,and only two drivers work are VGA and LAN.
I need to know when the new drivers for Win 64bit will be released and worked ?????
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=WIN7-BETA
 Thx for ur answer and I'll wait when it works.

Hi
Who knows buddy I doubt that someone here in the forum would know this
I think only some official Toshiba people could provide more information
If you want you can contact Toshiba. If you would get more details pleases share it with us
Greetings
Chad

Similar Messages

  • When the new Nike Sport Armband for iPod nano (5th generation) ?

    When the new Nike Sport Armband for iPod nano (5th generation) ?
    Is the Nike Sport Armband for iPod nano (4th generation)same to use??
    Is Nike Sport Armband or Incase Sports Armband good to use?
    Message was edited by: terry9891

    Not sure about the Nike, but do NOT buy the InCase armband. This product is HORRIBLE for at least 3 reasons. I am tall and of normal build. Tried to wear it while working out (have worn other iPods and MP3 players in armbands/cases while working out with no problems at all).
    1) The strap is barely long enough to fit over my biceps (which is normal sized). The strap is not flexible, so it's loose when your arm is extended, tight when your arm is flexed. When doing a normal arm exercise (not even a biceps exercise), with a normal amount of weight, the very first time I tried to wear this, it popped right off my arm (literally).
    2) This generation Nano is longer than previous ones. The case is even longer (longer than necessary). It barely even fit on my arm, length-wise, between my elbow and my shoulder (and my arms are somewhat longer than average). Also, it was so long that I had to try to wear it in only one position, otherwise I couldn't really even bend my arm (during the 1 minute it stayed on my arm to begin with).
    3) The case has a thin opening at one end but none at the other, and is difficult to get in and out. Thus you can either have access to the earphone plug or the "lock" button, but not both. I actually "solved" this by creating a small hole in the bottom that allowed me to stick the earphone plug through it, allowing me access (sort of) to both ends. (Unfortunately, did this before testing the product out and can't return it now, if I could have to begin with.)
    Do NOT buy this product. I wish I hadn't.

  • When the new version of MCSA window server will release?

    The Microsoft Certified Solutions Associate certification is the foundation for higher certifications and prerequisite for the Microsoft Certified Solutions Expert (MCSE).

    No one knows this answer except those at Apple.  If it hasnt been announced, no one else knows.

  • When the nokia c2-00 V03-99 update will be release...

    I'm tired with my nokia c2-00 since it can't connect internet to applications such as opera mini and the like and using the default web is costy and slower.so i'm waiting for an update if that will be a solution. I hope updating it might be a remedy to my c2-00 V03-99 and hope nokia company help solving it.thanks

    If the default web browser is working then your internet connection settings on the phone are correct. The fact that 3rd party apps don't work would not be supported by Nokia. 3rd party app issues should be brought up with the app developers. 

  • Error -43  when try playback on win7 64bits over the network QT that recide MacPro  osx 10.5 however i can play with VLC player, This happend when the QT is inside a Folder with name longer 8 chars other files has no problem with long names just the QT

    error -43  when try playback on win7 64bits over the network QT that recide MacPro  osx 10.5 however i can play with VLC player, This happend when the QT is inside a Folder with name longer 8 chars other files has no problem with long names just the QT  nfs sharing

    Never mind, I already found the solution myself.
    What I did wrong was:
    - not copying the master image to the nbi folder
    - selecting the netinstall-restore.dmg image as source to copy to my HD.
    The thing is, when you create a netinstall image for 10.5, the image itself is already included in the netinstall image so you don't have to do anything else.
    With the 10.4 image however, you also have to copy the master image to the NetBootSP0 directory.
    In the *.nbi folder contains an netinstall-restore.dmg file. But that is only to boot you to netrestore, it's not the image itself.
    Other alternative is to copy the images to another folder that you share with AFP and adjust the configuration of netrestore like described in this manual:
    http://www.shellharbourd.det.nsw.edu.au/pdf/misc/osxrestoringnet.pdf
    This manual was also how I figured out that I forgot to copy the image to the NetBootSP0 folder.

  • When downloading the new 10.7 update for itunes, an error message saying that there is an error writing to file, verify that you have access to this file comes up... what is this??

    When downloading the new 10.7 update for itunes, an error message saying that there is an error writing to file, verify that you have access to this file comes up... what is this??

    That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
    XP instructions in the following document: How to perform disk error checking in Windows XP
    Vista instructions in the following document: Check your hard disk for errors
    Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

  • "Unable to connect to server" when trying to accept the new terms and conditions for iCloud.

    I keep getting "Unable to connect to server" when trying to accept the new terms and conditions for iCloud.  What can I do?  I can access the internet, but my clash of the clans applications is failing.  The problem started January 1, 2014

    I just figured out the problem with my grandma's iphone.
    Settings>iCloud>Delete Account
    IT WILL NOT DELETE YOUR ACCOUNT. it just takes it off the phone. then you can log back in, and BAM, You're good   I hope!
    Hope this helps.

  • Error when I create the New material Master (MM01) for New Plant.

    Dear experts,
    I got the error when I create the New material Master (MM01) for New Plant.
    Error:  Valuation Area 2800 Not yet productive with Material Ledger.
    So Pl send me the solution asap.
    Venkata Raju Khottari

    Hi,
    Have u assinged Plant to Company code?
    If u say no, use T.code OX18.
    Regards,
    Murali
    Assign points if it is useful.

  • I'm wondering if anyone else has had problems with their imac fans being extremely loud when running at slow speeds?  When the computer heats up enough for the fans to run at higher speeds they quiet down. New HD fan was just installed.

    I have an imac that I've had for a couple years.  The fans have always been loud when running at the slower speeds.  When the computer heats up enough for the fans to run at a higher speed the fans quiet down.  I had installed SMC fan control after multiple attempts with Apple to get the fan issue resolved.  That seemed to keep the fans quiet enough.  I've never had a problem with overheating.  Recently the fans were becoming loud again even running at the slightly higher speeds so I took it to my local Apple store and they replaced the hard drive fan.  I got it back and it's now as loud or louder than ever!!  And, now SMC fan control won't "stick."  The fans will speed up, but then gradually go back to the lower "loud" levels.  I'm at a loss as to what to do next. 

    Thanks jared,
    I'm still dealing with this issue through Apple. Some time after I posted this, I contacted Apple again. They did start a case up for me, as I was experiencing the same behavior on two different machines, with two different versions of Windows.
    So far it remains unsolved. I've logged iClouds for Windows on my desktop, which is brand new, then logged for awhile after completely uninstalling Norton Security Suite, depending on the Microsoft security for some time, and finally logged after I uninstalled iCloud for Windows, restarted, installed a clean download, and connected using a completely different test account, which Apple set up for me. None of this made any difference. Looking at the logs, it seems every 10 minutes, iCloudServices.exe creates a new TCP connection to confirm I'm using less than 5GB on iCloud, (which I am by a good margin, using less than 2GB), it seems this connection is not closed, and when the next iteration rolls around 10 minutes later, a new TCP connection is created. I come very close to having 6 TCP connections created per hour, until I restart my computer. This works out to... 6 x 24 = 144/day.
    Perhaps the article you posted will shed some further light on this. I'm thinking seeing the state of the connection through netstats, at the least, could help.
    For the last week, I've been putting a hold on further logging, as Apple wants me to create a new user account on one of my computers, install iCloud for Windows there, and log it running in the other account. This however basically means I cannot use my computer for a fair number of hours, and I've been busy enough with work the past week that I haven't the time or energy to afford to set this up and run it. I've had need of my computers too much for the past week.

  • WHEN WILL THE NEW IPHONE BE AVAILABLE FOR ON-LINE PURCHASE?

    Ordered the first iphone on-line and want to order the new one the same way. When will the new model be available for on-line purchase?

    Maybe never, but doubtful anyone here has any idea before Apple makes an announcement.
    We can thank the hackers and those more interested in making a few bucks by selling non-activated iPhones via eBay.

  • Anyone know when the New Tour with the touch pad will ever come out for vzw?

    Anyone know when the New Tour with the touch pad will ever come out for vzw? Date,Day,Year, Month anything?

    My understanding is that the new Bold 9650 is considered the "new Tour" seeing as how the Tour is the Blackberry 9630.

  • When will come the new raw version update for Adobe Lightroom 4 with Nikon D750 support?

    Hello Adobe,
    When will come the new raw version update for Adobe Lightroom 4 with Nikon D750 support?
    Best regards
    Frank

    There won't be an update for Lightroom 4. The only way you can work with your D750 raw files is to use the free standalone DNG converter to create DNG copies. If you want to be able to work on the NEF files then you will have to upgrade to Lightroom 5. Lightroom does not use the Camera Raw plug-in. Everything is part of the Lightroom program. If you want to stay current with Lightroom then you need to follow the update/upgrade path. That means purchasing each new major version of Lightroom or subscribing to the creative cloud plan.

  • Can I still buy the Iphone 4s 16GB when the New Iphone is for sale?

    hello,
    I was wondering if i could buy an Iphone 4S 16Gb when the New Iphone is out? Or is there only an 8Gb version available for sale?
    greetings

    No new iPhone has been announced. No plans for what will happen re: the iPhone 4S have been announced.
    Speculation, rumor, and discussion of unnanounced products is forbidden by the terms of service.

  • How do you clean install CS6 on a new PC Win7 64bit system?

    How do you clean install CS6 on a new PC Win7 64bit system?
    I think I've upgraded all th way from Version 7.

    There is no problem. If no previous, activated software is detected on the system, the upgrade installer will simply revert to its secondary mode and request to input the old serial in a second step for verification. Unless you do some exotic crossgrade/ sidegrade stuff, this should work with no problems whatsoever.
    Mylenium

  • When i open itunes it gives me the option to download the new version 10.3. my computer will not support 10.3. i can't by pass the download to continue with my current version of itunes. i've trashed and reinstalled 8.2.1 twice. any solutions?

    When i open itunes it gives me the option to download the new version 10.3. my computer will not support 10.3. i can't by pass the download to continue with my current version of itunes. i've trashed and reinstalled 8.2.1 twice. any solutions?

    I am in the same boat. I tried repeatedly to contact iTunes support, but was told each time that I had contacted the wrong deaprtment and they could not help me. There must be a way to still be able to use the iTunes store without paying for a system update. If not, I hope they will reimburse me the money I have in my acount.

Maybe you are looking for

  • Load Report failed when opening Report under IIS 5.1

    I recently upgraded to Crystal Reports 2008 (12) from Crystal Reports Basic 2008 (10.5).  I am using Visual Studio 2008 with the CrystalReportViewer.  Now when I run my reports from the website under IIS 5.1 (Windows XP SP3), I get a Load Report Fail

  • Where are my photos? Old and new missing.

    I'm not very tech savvy so I apologize in advance. But I recently signed up on icloud.com. Before this, I had to change my appleID in the photo stream (on my phone) because it wasn't matching. All is well after that except all of the old photos I had

  • Aggregations with BAdI

    Hello there, I need to provide a solution through BAdI to copy data from an application to another, with almost the same dimensions. The only difference between applications it's the Time dimension. In the source application, the lowest level I've it

  • Check stock consistence

    Hi, I have used the transaction MB5K to check stock consistence: about several materials codes there is a red message that is : ' 506  miss an enter in the historical table'..What means?Where is the historical table and how can I correct this inconsi

  • How do I paginate a long table?

    I imported a file from Excel that had page breaks in a long (vertically) table, but they did not import.  This is a common exercise in Excel, but I cannot locate how to insert a page break or properly paginate a long table in Pages.