When the printer dialog shows up is there a way to print by pressing enter instead of using the mouse?

Right now, I have to click with the mouse: I don't have to do in in Firefox: Just press enter!

I just tried it in Thunderbird and it worked for me.
Try holding the shift key while you start Thunderbird to disable add-ons and see if that could be the cause.

Similar Messages

My iCloud backup from my old phone shows incomplete is there a way to retrieve the data that I backup from my old phone even if it didn't complete . They told me that they would let if finish when I traded in my old phone. I want to restore it to new phon

My iCloud backup from my old phone shows incomplete is there a way to retrieve the data that I backup from my old phone even if it didn't complete . They told me that they would let if finish when I traded in my old phone. I want to restore it to new phone. Even if it didn't complete how to I restore the 5 g that did backup

Unfortunately you can't restore an incomplete backup.

Is there a way to obtain the text item's value when the mouse pointer at?

Hi,
Is there a way to obtain the text item's value when the mouse pointer at? Mouse pointer may be located somewhere out of current record and even out of current block.

There is a when-mouse-over trigger and that works fine in client-server mode for Forms 5/6/6i, but that is less indicated when deployed using Application Server.
In that trigger you may write whatever code is necessary, restricted package procedures.
Still, I think, for your case, if you do not have to deal with a multi-record block, you should use the HINT property for that item and set_item_property with the HINT argument for that item in order to set the hint to the item's value - this should set_item_property should be called on the when-new-record-instance .

Issue: I synced my iphone with itunes, I then deleted many songs from the iphone, when I sync to itunes again is there any way to have itunes duplicate what it sees on the iphone rather than the other way around?

Issue: I synced my iphone with itunes, I then deleted many songs from the iphone, when I sync to itunes again is there any way to have itunes duplicate what it sees on the iphone rather than the other way around?

so, if I delete all music on itunes then connect my iphone all my music on the iphone will then be deleted?

Is there a way to filter a drop down list by using the result main data display from"GetUserProfileByName" when open the form.

Hi
Is there a way to filter a drop down list by using the result main data display from"GetUserProfileByName" when open the form?
The second source has a huge list of company names that can be narrrow by email work.
background:SP 2010 and Infopath 2010
CRISTINA&amp MICROSOFT Forum

I'm not sure if I understood your question clearly but here is a good resource on how to get attributes from "GetUserProfileByName" web services:
http://blog.mangroveweb.com/pre-populating-an-infopath-from-with-mysql-data-using-a-net-web-service/using-sharepoints-getuserprofilebyname-web-service-to-retrieve-ad-account-information/
Regarding filtering dropdown list then this could be done by applying form on-load rules.
Hope this helps

When watching a video in itunes, is there a way to zoom in on the video, i.e., to 200%?

When watching a video in itunes, is there a way to zoom in on the video? For example, zooming to 200%?
I've been looking but can't find any option to do this.
Thanks
A

You should be able to click on the change themes button and go back to your original theme. If all of the text is currently in the book then make a backup before changing back just to be on the safe side. To do so just click on the book icon and type Command+d (Duplicate).
OT

In iOS 4, you could make separate photo slide shows with separate songs. In iOS 5, this has changed. Now only 1 song is allowed at a time. It will not save separate song selections for each slide show. Is there any way to fix this? This is something I

In iOS 4, you could make separate photo slide shows with separate songs.
In iOS 5, this has changed. Now only 1 song is allowed at a time. It will not save separate song selections for each slide show.
Is there any way to fix this? This is something I use every day.
I am on an iPad 2, 32gb, wifi...
Thank you

My Photos app works the same on iOS 5 as it did on iOS 4 i.e. I can have a different track for each album. When I select a track for a photo album I then start the slideshow so that it shows the first couple of photos with the track playing - I'm not sure it's necessary to start the slideshow but I always do and it remembers that track for that album.

HT3149 When I click on a photo, is there a way to see where else it is located, like in which albums it is in?

When I click on a photo, is there a way to see where else it is located, like in which albums it is in?

In iPhoto '11 you can show the event a photo is in or show the image file in the Finder:
You can select a photo and click the triangle in the lower right corner. Then select "Show event".
To show the image file in the Finder use the "File" menu in iPhoto: File > Reveal in Finder.
But there is no direct way back to the albums. To find the photo in the albums you could use unique keywords for each album or flag the photo, then filter the abum you are interested in.
Regards
Léonie

Is there any way to export IT Resource data from OIM using the export tool?

Hello,
we are trying to migrate an OIM development environment to a preproduction environment and we need to migrate more than 400 IT Resources. We have exported some IT Resources and when we imported them in the preproduction environment their data was not migrated. Is there any way to export IT Resource data from OIM using the export tool? Or is there any other way to do this without doing it by hand?
Thank you for your help
Kind Regards

Well , OIM doesnot provide any such facility to export ITResource data along with ITResource .
Directly updating the DB could be an option ..
Thanks

During sync, new contacts on my iphone are deleted. The option in iTunes to replace contacts on my iphone is not selected. Is there a way to merge info on sync instead of replace?

During sync, new contacts on my iphone are deleted. I'll typically add any new contacts I get directly to my iphone, simply because I don't have my mac on me at all times. However, unless I specifically add the contact to my mac address book, it will be deleted from my iphone contacts upon sync. The option in iTunes to replace contacts on my iphone is not selected. Is there a way to merge info on sync instead of replace?

Thank you for your reply. I realy have nothing else to sync - no music. Emails do work so its just my contacts I am concerned about. I'm kinda new at this but have a working understanding of the system.
I have an icloud account but the Geek Squad went there and tried but could not export contacts. I truly am not that good re icloud. They worked exclusively with my itunes, re-downloading, etc - all of the stuff in their book.
I have not tried a complete restore because I am not sure I am that good with the equipment but could. I did all of the stuff on the help page - sync reset, forced one-way sync etc but the phone just does not seem to recognize the sync. I have not gone to an Apple store to have them have a look - that may be my next step to hook up to another itunes computer. It seems simple to me - it was working fine until maybe 3 months ago - probably when there was an update. Its telling to me that the phone does not tell me there is a sync in process while itunes is saying there is - its just not biting between the 2.
I appreciate any hep - and I said, I not stupidi about these things but have kind of reached as far as I am comfortable with fear of doing something really wrong.

Rollover Sidelet disappears after a few seconds even when the mouse hasn't left the "hit area."

Rollover Sidelet disappears after a few seconds even when the mouse hasn't left the "hit area." There is enough text in the sidelet that the user cant read it all before it disappears on its own. Then they have to move their mouse off the hit area and back on it to see it for another 5 seconds. How do I fix this?

You should tell which version you are using. If you are on CP7 or earlier, look in the Properties panel of the slidelet, not the slidelet area (that is the rollover area, blue rectangle): change time in Timing accordion.
If you are on CP8, for the same object (slidelet) change its time in the Timing panel that is now no longer in the Properties panel.

Follow sprite when the mouse is down, but randomly move when mouse is up?

I have a sprite that has a Random Movement behavior.
While the mouse is down, I want it to stop this behavior and initialize a Follow Sprite behavior instead.
When the mouse is lifted, I want to stop the Follow Sprite behavior and reset/restart the Random Movement behavior.
Openspark helped me out with a different version of a very similar behavior a long while back, which worked. It switched between Random Movement and Draggable. I tried to edit the code so that it would apply to Follow Sprite instead of Draggable, but it isn't working the way I thought it would.
The order of behaviors on my sprite is as such:
followSprite (Follow Sprite)
moveToward (The behavior described above)
randomMove (Random Movement)
turnTowardsMouse (sprite faces mouse when it is clicked)
Face Destination (if not facing mouse, sprite faces toward the randomized endpoints generated by randomMove)
This is the moveToward behavior - the middleman that's supposed to be swapping between the two:
property pSprite
property pTouching
on beginSprite(me)
pSprite = sprite(me.spriteNum)
end beginSprite
on mouseDown(me)
-- Overrule the Random Movement and Rotation behavior until the mouse
-- is released. See the on prepareFrame() handler for the effect.
pTouching = TRUE
end mouseDown
on prepareFrame(me)
if pTouching then
    -- Block the event from reaching the Random Movement and Rotation
    -- behavior, so that only the Draggable behavior will work.
    if the mouseDown then
      stopEvent
    else
      -- The user has released the mouse.
      -- Start a new movement in the Random Movement and Rotation behavior.
      pSprite.pPath = VOID
      sendSprite(pSprite, #mNewPath)
      pSprite.pRotate = VOID
      sendSprite(pSprite, #mNewRotation)
      pTouching = 0
    end if
end if
end prepareFrame
Can anyone help me figure this out?
If you want to imagine a visual, it's essentially a touchscreen fish tank. Fish swim around randomly, but when someone is touching the screen, they approach the point of contact (which is defined by a tiny invisible sprite centered on the cursor).
Once again, thank you so much to anyone who can help me out. This is part of a capstone undergraduate art project I am doing - and I am far more experienced in making the visuals than I am in coding. I am having to mostly tackle Lingo on my own. Any coding help I've received will be recognized (with permission) on my artist website as well as a thesis paper I am writing that will be published in May.

As first steps at troubleshooting you could try an SMC reset and a PRAM reset:
SMC Reset
Shut down the computer.
Unplug the computer’s power cord and disconnect peripherals.
Press and hold the power button for 5 seconds.
Release the power button.
Attach the computers power cable.
Press the power button to turn on the computer.
Reset PRAM
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P and R.
You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
If that doesn't help, what OS are you running? Depending on the OS (Lion/Snow Leopard) will help determine the next step.

My friend gave me her ipod about 2 years ago. neither of us know the passcode and now we have no way to link it to the original itunes account. is there a way i can reset it so i can use it?

my friend gave me her ipod about 2 years ago. neither of us know the passcode and now we have no way to link it to the original itunes account. is there a way i can reset it so i can use it?
I have tried plugging it in and holding the sleep/wake button and home button at same time and all it does is gives me the "slide to power off" option. Is there anything I can do??? Please Help!
Message was edited by: Unordinary92

Try DFU mode and then restore
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Or try using this program to place the iPod in recovery mode
RecBoot: Easy Way to Put iPhone into Recovery Mode
- Next try the manual install method of:
iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch
Place the iPod in recovery mode after the firmware download is complete and then restore using the instructions in the article. Sometimes recovery mode timeouts and returns to disabled before the firmware download is complete.
- Then try on another computer

Is there a way to password protect certain apps from being used? Example I don't want my child to access my apps while he's using his on the iPad

Is there a way to password protect certain apps from being used? Example I don't want my child to access my apps while he's using his on the iPad. I don't want to lock him out of the iPad. Let him use Angry birds, but not Sims or Games not appropriate for him that I play.

Sorry, but it is not possible to restrict use of specific apps other that the few restrictions provided in the Restrictions settings, not unless the app itself provides some sort of lock. If you don't want your child playing certain games, the only answer is to not load them on the iPad he uses.
Regards.

Is there a way to find out how much data was used over the lifetime of my phone (cumulative cellular and wifi)?

Is there a way to find out how much data was used over the lifetime of my phone (cumulative cellular and wifi)?
I was just curious

Given that the phone doesn't track how much data is used over WiFi, no. And cellular data usage can be reset.

When the printer dialog shows up is there a way to print by pressing enter instead of using the mouse?

Similar Messages

Maybe you are looking for