When the screen goes black the music stops

Hey everybody, when the screen goes black the music stops in my  radio application. What should I do?
'll Be very happy if someone could help me

just to confirm, it is not a issue with the earphones being only partially plugged in.  I have verified this already.

Similar Messages

  • I have a MacBook Pro with Retina display, when starting up, I see the Apple logo, the bar underneath fills about 1/4 of the way, and then the screen goes black, the mouse cursor is still visible.

    Boots to black in OS X mode (I believe 10.10.2? tough to check right now).  I can boot into Windows 8 using Boot Camp without incident.  I have booted to Disk Utility and run Disk and Permissions Repair.  I have booted into Diagnostics, and no issues were found (ADP000 was the Reference Code given).  I reset the PRAM, which gave a louder chime than I had been getting when failing to start up OS X, but otherwise no change.  Feeling that my options were exhausted, I attempted to restore from Time Capsule, and it won't connect to Time Capsule, despite Time Capsule being the active router whose network I am connected to.  Please advise. 
    (This is my girlfriend's computer, she tells me that she selected an option to perform an automatic update later, that night.)

    Install or Reinstall OS X from Scratch
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Erase the hard drive:
      1. Select Disk Utility from the main menu and click on the Continue button.
      2. After DU loads select your startup volume (usually Macintosh HD) from the
          left side list. Click on the Erase tab in the DU main window.
      3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
          the Security button and set the Zero Data option to one-pass. Click on
          the Erase button and wait until the process has completed.
      4. Quit DU and return to the main menu.
    Reinstall OS X: Select Reinstall OS X and click on the Install button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible
               because it is three times faster than wireless.
    This should install the version of OS X that you had installed.
    Be sure you only work on the OS X volume, not your Windows volume. I cannot tell you if you will still be able to boot the Windows volume after the above. You will need to find a fix for that.

  • My 3rd gen ipad crashed after using the gestures... the screen goes black. the gesture menu remained but the rest of the screen goes dark.. can someone help me with these?

    any help?? i dont care about my downloads i just want my ipad back to normal

    When the power is on and I press the home button, I can slide my finger where the slider bar "would be" and it makes the noise as if its "opening" flashes a blue screen then returns black...

  • My nano generation 6 now stops playing music when the screen goes black

    The nano recently started to do something weird.  I have been using it for a couple years with no issues.  Recently it will stop playing music as soon as the screen goes black (sleep).  it never did this before.  I have checked the settings, nothing was changed and I updated it - Restore default settings.  that didn't work. 
    Settings: Sleep Wake = next track
    It seems to work fine when I use a speaker accessory; the music continues to play when it sleeps.

    just to confirm, it is not a issue with the earphones being only partially plugged in.  I have verified this already.

  • Recently, my iPod stops when the screen goes black...any ideas?

    My iPod stops playing when the screen goes black.  I have tried switching headphones, tried charging it, and tried resetting it...nothing has worked.  Any ideas?

    kellyfrombirdsboro wrote:
    My iPod stops playing when the screen goes black.  I have tried switching headphones, tried charging it, and tried resetting it...nothing has worked.  Any ideas?
    Which iPod? 
    Identifying iPod models
    Have you tried "restoring" your iPod?
    iTunes & iPod Hints & Tips 

  • TA44551 Just recently my ipod nano's battery seemed to stop working? I plug it into a charger, the ipod says it's charged, but when I take it off the charger, the screen goes black. What's going on? How can I fix it?

    Just recently my ipod nano 4th generation's battery seems to be messed up? I plug it into the charger and the ipod says it's charged, but when I take it off the charger, the screen goes black. What is going on and how can I fix it? I'm really sad because it happened so suddenly.

    Yes.  The battery appears to be shot and in need of a replacement.  This can either be done by Apple or a third party repair company.
    http://www.apple.com/support/ipod/service/prices/
    You can Google "iPod battery replacement" for third party service centers.
    B-rock

  • When I click on video it is stuck on one tv show, when I click 'done' the screen goes black so I can't access any other video that I downloaded from iTunes onto my iPad 2. How do I troubleshoot?

    The video on my iPad 2 is frozen on a tv show, although it will play the tv show until the end. At the end, when I click 'done' the screen goes black so I can't see the other movies that I've downloaded. I've shut down a few times but it reverts to the same thing. How can I re-set the video feature or do what is necessary to get it working again?

    Have you tried resetting the iPad:
    Reset iPad:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.

  • When I turn on my iPhone 4S the apple logo pops up for a split second then the screen goes black but the phone itselfs boots up just fine???

    I tried replacing the screen with no luck. The same thing happened with the new screen. I replaced the backlight coil and the backlight ic and still have the issue. I don't know what else could be the problem. If the battery is completely dead and I plug it in the "charging battery" symbol shows just fine during the entire time it is charging, but as soon as it starts to boot up the apple logo shows for a split second then the screen goes black. The rest of the phone still boots up just fine. I can use SIRI, press the lock button like I'm about to use my phone and slide my thumb across where the "slide to unlock" would normally be and it will make the unlock noise just no picture display. I am pretty tech savvy when it comes to repairs and all of the connections look fine, replaced backlight coil and ic, replaced LCD/digitizer, tried a restore, tried a DFU restore, multiple hard resets, but I am at a loss as to where to go from here. I had dropped the phone and put a minor crack in the screen but the phone worked just fine for a couple months after before this started to happen. The phone is still under apple warranty but apple won't cover it because Apple is stating that it is "caused by the crack in the screen." But being a repair technician I know that is not the case... Good one apple. So I took it upon myself to try to determine the REAL problem. Anyone with a little more knowledge have any ideas? Any suggestions are appreciated!!

    Yes, I understand that. But The screen issue is not a result of user damage. The phone was not dropped when the screen got cracked. My daughter was standing in a chair at the table and dropped one of her toys onto the bottom of the phone and cracked it right by the home button. (Nowhere near the LCD/digitizer flex cables, connections, or logic board components) then a few months later my phone had died, I plugged it in, it showed it was charging, then Apple logo disappeared and screen didn't work. AFTER contacting Apple about the issue and them telling me that it "is a result of the very minimal crack to the sheet of glass that has no relation to the LCD or Digitizer and that the warranty does not cover it I had taken it upon myself to change the LCD/digitizer to no avail, as well as backlight ic and backlight coil to no avail. But how do I go about letting Apple know that it is in fact NOT due to the cracked screen nor is it due to the flex cable connections? I can't. So the lady that works the call center phones  trying to "convince" me that she knows what she is talking about and "convince" me that it is from the cracked screen I have to take her word because I can't show Apple that its not because of that without paying them $199 to fix the screen in which case they will just send me a new phone rather than fix the faulty hardware under warranty.

  • HT4436 On my touch I have an iCloud backup message asking me to check my settings, when I click on settings nothing happens and the screen goes black. It will not allow me to turn my touch on or off. What should I do to rectify this?

    On my touch I have an iCloud backup message asking me to check my settings, when I click on settings nothing happens and the screen goes black. It will not allow me to turn my touch on or off. What should I do to rectify this?

    Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430

  • I have a first gen iPad, 64g, and for no apparent reason, the screen goes black and whatever app I am using is closed on me. It seems to be happening more and more frequently, especially when loading a blog, or trying to watch a YouTube video. I try to o

    I have a  iPad, 32g, and for no apparent reason, the screen goes black and whatever app I am using is closed on me. It seems to be happening more and more frequently, especially when loading apps, or trying to watch a YouTube video. I try to open safari or youtube again and it will often crash several times before it may or may not decide to load for me. It is extremely annoying and getting to the point where I can not use it

    Standard troubleshooting steps in order are as follows:
    Power the iPad off and on.
    An iPad reset, which is done by pressing and holding the home button and the sleep/wake or on/off button simultaneously until you see the Apple logo and then release.
    Restore your iPad with iTunes from your iPad's backup.
    Restore your iPad with iTunes as a new iPad or not from your iPad's backup.
    If no change after the last step, your iPad has a hardware problem.

  • I have a iPhone 4 and in the the middle of doing something the screen goes black. Put when I put it in direct sunlight I can see my stuff? Can someone help me

    I have a iPhone 4 and in the the middle of doing something the screen goes black. Put when I put it in direct sunlight I can see my stuff? Can someone help me,!!!

    Hey Destiny24
    Check out the iPhone Hardware troubleshooting guide in the Display section. It has a section for not having any backlight. If you cannot get it resolved, there are some links towards the bottom of the article for further options when it cannot be resolved.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • HT3576 When I pull the notification screen down after about 5 seconds the screen goes black and then the apple appears for about 30 seconds and then returns to the home screen, this is an iPhone 4 running ios7 , any ideas??

    When I pull the notification screen down after about 5 seconds the screen goes black and then the apple appears for about 30 seconds and then returns to the home screen, this is an iPhone 4 running ios7 , any ideas??

    One problem though, the top button on my phone is jammed so i cant power off the phone, anyway of resetting the phone without using the top button ?

  • When i double click a photo in iphoto to edit, the screen goes black

    when i double click a photo in iphoto to edit, the screen goes black.  I'm using 10.7.5 with iPhoto 9.4.2.  Can anyone help?

    There are several possible causes for the Black Screen issue
    1. Permissions in the Library: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
    2. Minor Database corruption: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
    3. A Damaged Photo: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). (On iPhoto 11 this option is under the File -> Reveal in Finder.) Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
    4. A corrupted iPhoto Cache: Trash the com.apple.iPhoto folder from HD/Users/Your Name/Library/ Caches...
    5. A corrupted preference file: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
    If none of these help:
    As a Test:
    Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
    Import a few pics into this new, blank library. Is the Problem repeated there?

  • When using bbbc I player the screen goes black after 30 secs and only get audio. I have latest version of the app and also tried via web browser. Any advice it is so frustrating

    When using bbbc I player the screen goes black after 30 secs and only get audio. I have latest version of the app and also tried via web browser. Any advice it is so frustrating

    Is this an app bbbc?  IF it is I would contact the app developer and see if they can resolve the issue for you.
    also take a look at the reviews and see if other users are having the same issue and see if they have a resolution.

  • Have a 3 yr old iMac the screen goes black when using it it will come back on when you move the mouse  thanks for your help Dave

    Have a 3 yr old iMac the screen goes black when using it it will come back on when you move the mouse  thanks for your help Dave

    It's possible you've got a 'hot corner' set up. If you have and move the mouse to a certain corner of the screen it'll do as you describe. Have a look in System Preferences>Mission Control, bottom left of the window click on the 'Hot Corners' button and see if there is anything in there.

Maybe you are looking for

  • Using Flex 2 for dynamic creation of a Flex 2 application at runtime

    We're looking to replace our existing end-user development environment and believe Flex 2 may be able to satisfy our requirements. However, without spending a month trialing the product I thought some existing user(s) could suggest (based on personal

  • Add PCM and AC3 to DVD

    We are a DVD replicator in San Jose, CA. http://www.newcyberian.com. Lately we receive so many DVD masters from our clients that do not have PCM or AC3 audio stream. They play fine on most DVD players but we know that's a violation of the DVD spec. I

  • Exporting bar charts to excel

    Hi All, I would like to export my bar chart to excel.When i googled, i did not get any relevant information regarding this topic. If anyone could help me in this regard with the code will minimize my burden to a greater extent. Thnaks for all ur supp

  • Installing Win7 in bootcamp on Maverick stalled at Keyboard  type

    Ive  just  bought win7 64 bit  cos  my NEW iMac  wouldnt  install the 32 bit  version  and during the installation, windows sticks at select  keyboard type.. no Mouse action at all nor  does KB  allow input. Ive gone back and used an older  mouse tha

  • Open more than 2000 sockets in Unix.

    Hi, I'm trying to open 3000 sockets on Unix machine but i get java.net.SocketException: Too many open files. Any Idea?