When the shuffle is charging in its dock what color should it be when its charging and when its fully charged? thx
when my shuffle is charging in its dock what color should it be..i.e. blinking, solid green, and when it is fully charged what should it be? it is 4 yrs old thx
Battery condition says normal but cycle count is on the high side.
May be better off with a new battery.
Hope everything turns out right.
Similar Messages
-
My phone turned its self off for about 10 minutes, when it came back on it went from 84% to 18%. When I put in on the charger it shows the plug symbol as if its fully charged but the phone stays at 18%. Over time the battery dropped, but it went from 18, to 9, 3, then 1, and every time I put it on the charger it doesn't actually charge. Now my phone is off and it will not turn on.
I'd suggest taking it to apple. Warranty or no warranty.
-
What color should light up on my car charger when my iphone is plugged in
WHAT COLOR SHOULD LIGHT UP ON MY CAR CHARGER WHEN MY IPHONE IS PLUGGED IN OR JUST THE CHARGER IS?
That depends on the manufacturer of the charger...check the user guide that came with it. Apple typically uses amber when charging and green when running on line power.
-
I want to clean all of the cookies and bugs that are in my computer causing it to be slow. What program should I use that is safe and won't mess up my computer?
Problem description:
I would like to clean up my computer. Its beginning to run slow and I believe cookies and bugs are apart of the reason.
EtreCheck version: 2.0.6 (91)
Report generated October 26, 2014 at 4:59:31 PM EDT
Hardware Information: ℹ️
MacBook Air (13-inch, Early 2014) (Verified)
MacBook Air - model: MacBookAir6,2
1 1.4 GHz Intel Core i5 CPU: 2-core
4 GB RAM Not upgradeable
BANK 0/DIMM0
2 GB DDR3 1600 MHz ok
BANK 1/DIMM0
2 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en0: 802.11 a/b/g/n/ac
Video Information: ℹ️
Intel HD Graphics 5000 -
Color LCD 1440 x 900
System Software: ℹ️
OS X 10.9.5 (13F34) - Uptime: 13 days 2:41:41
Disk Information: ℹ️
APPLE SSD SD0128F disk0 : (121.33 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 120.47 GB (70.38 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
USB Information: ℹ️
Apple Internal Memory Card Reader
Apple Inc. iPhone
General USB Flash Disk 16.13 GB
S.M.A.R.T. Status: Verified
MSD (disk1s1) /Volumes/MSD : 16.13 GB (11.18 GB free)
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Library/Extensions
[loaded] foo.tap (1.0) Support
[loaded] foo.tun (1.0) Support
Startup Items: ℹ️
tap: Path: /Library/StartupItems/tap
tun: Path: /Library/StartupItems/tun
Startup items are obsolete and will not work in future versions of OS X
Problem System Launch Daemons: ℹ️
[failed] com.apple.wdhelper.plist
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[running] com.perion.searchprotectd.plist Support
User Launch Agents: ℹ️
[loaded] com.genieo.completer.download.plist Support
[loaded] com.genieo.completer.ltvbit.plist Support
[running] com.genieo.completer.update.plist Support
[loaded] com.google.keystone.agent.plist Support
[invalid?] com.jdibackup.ZipCloud.autostart.plist Support
[running] com.zeobit.MacKeeper.Helper.plist Support
User Login Items: ℹ️
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Internet Plug-ins: ℹ️
DirectorShockwave: Version: 12.1.3r153 - SDK 10.6 Support
Flash Player: Version: 15.0.0.189 - SDK 10.6 Support
FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
QuickTime Plugin: Version: 7.7.3
Default Browser: Version: 537 - SDK 10.9
User Internet Plug-ins: ℹ️
TroviNPAPIPlugin: Version: 1.0 - SDK 10.9 Support
Safari Extensions: ℹ️
Trovi Search for Safari (Disabled)
3rd Party Preference Panes: ℹ️
Flash Player Support
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
53% mds
9% WindowServer
3% mds_stores
3% storeagent
2% hidd
Top Processes by Memory: ℹ️
920 MB mds
31 MB com.apple.WebKit.WebContent
30 MB Messages
29 MB Safari
21 MB WindowServer
Virtual Memory Information: ℹ️
31 MB Free RAM
713 MB Active RAM
681 MB Inactive RAM
1.09 GB Wired RAM
17.85 GB Page-ins
1.95 GB Page-outs -
I am trying to use Time Machine to back-up to an external hard drive and I get the following message.Unable to complete backup. An error occurred while creating the backup folder. Does anyone know what I should do?
Hello Drake, I suspect one or more of the Drives needs repairing, but...
Have you looked through Pondini's extensive TM help site?
http://Pondini.org/TM/FAQ.html
http://pondini.org/TM/Troubleshooting.html
Can't imaging something not being covered there. -
The "none" option is not there!what to do?i am a student and i don't have a credit card.
Hi,
From Apple Support:
Creating an iTunes Store, App Store, iBooks Store, and Mac App Store account without a credit card
http://support.apple.com/kb/HT2534 -
I'm making a slideshow with Lightroom 5. I'm using a 2014 Macbook Pro. Everything works except when I play the actual slideshow the pictures are smaller than what they should be. But the preview is showing the correct photo size. Does anyone know why this is happening and how to fix it? Thanks!
Hey ronfya
Did you ever get any feedback on this? I haven't read the Technicolor link yet. I was just trying to figure out why my stuff comes out darker on Vimeo. Could this be because FCPX is displaying it to brightly?
A.T. -
Everytime I try to Sync the itunes shoe me error 1415. What i should do?
Every time I try to sync, the Ituns show me "update complete ok to dissconnect", but my iPOD is empty!! and in the ituns library there is over then 400 songs.
What cause this problem? and I can I fix it?
Thank you for help!Have you had a chance to look at this troubleshooting page? It may be of some help: Error 1415, 1417, 1418, or 1428 when restoring or updating an iPod in iTunes 7 or later
-
i have a problem with the bharathmatrimonilal website. i canot open. what should i do
Clear the cache and the cookies from sites that cause problems.
* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"
* http://kb.mozillazine.org/Error_loading_websites -
I need help!
If you have Snow Leopard installed then buy yourself another copy of the Snow Leopard DVD. You can purchase replacements for the original discs from Apple Support:
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support: Apple - Support - Contact Apple Support.
Otherwise, for Lion, Mountain Lion, and Mavericks you would use Internet Recovery:
Computers that can be upgraded to use OS X Internet Recovery
OS X (Lion/Mountain Lion)- About OS X Recovery
You can also create a USB flash drive installer for any version of OS X with the appropriate tools. -
Everytime i try to download firefox3.6 it says if i wish to run or save the file (I say run),then it says something about a temp. file and I say to run.Then it asks me what file i wish to use and I don't know which one.If i use Mozilla,then it kicks me out and it won't let me get the newer version.
Have you tried using '''Help''' > '''Check for Updates''' while in an Admin account to allow Firefox to update itself?
-
Need help, should i call apple ? or any other suggestiion?
I would contact Apple vi a the express lane:
https://expresslane.apple.com/GetproductgroupList.do?PRKEYS=PF3 -
Can I use the Shuffle over USB in a car?
Hi all,
Have a brand new iPod Shuffle 4th gen that I want to setup for use in a car. Have a Nano in one car, using a USB connection...that works great. I'm trying to do the same with a Shuffle in a different car, but with no luck. The stereo doesn't acknowledge it's even connected. That said, I tried connecting it with USB in my car that works with my Nano, and it also didn't work there.
Can the Shuffle only be connected through AUX? If I do that, I assume it has to be controlled with the Shuffle as well, and can't be controlled through the stereo (showing the music on screen)?
(I realize some of this may be car specific, but in general, trying to find out if USB playback is just not possible).
Thanks!
-MikeWhen you connect ANY iPod to a car audio system using a USB connection, the iPod is acting as a storage device. The iPod is not doing anything else. It is not being controlled to play music. The car audio system is only accessing the iPod's "disk," like it would access a USB flash drive that has song files on it, and the car audio system is then playing the music.
The most likely reason it does not work with the shuffle is because the shuffle does not have a dock connector (or Lightning connector) like other iPods. It uses the headphones jack, so there may be some missing functionality or connection points. You should check the documentation for the car audio system to see what devices are supported.
If you connect the shuffle with the appropriate cable to an auxiliary audio input on the car stereo, you are using the shuffle to play through the car speakers, like with any device you connect that way.
As an alternative, you should consider getting a cheap USB flash drive, like this one that is so small that it barely sticks out of the USB port
http://eshop.macsales.com/item/SanDisk/SDCZ33008G/
Put your favorite songs on it, and leave it connected in the car (except when you want to change songs). It has 4x the storage capacity of a shuffle for about $10, and there's no dangling cable. You'll save your iPod from the wear and tear of constantly connecting and disconnecting it, plus a USB flash drive is much less susceptible to damage from extreme hot and cold compared to an iPod (especially one that has an LCD screen). -
Got the shuffle G2 to work with XP- somewhat....
I like everyone else with a shuffle have been having problems with Windows not recognizing the iPod, it would show up in the device manager as an "unknown device" under the USB root hub. I tried all the uninstalling/rebooting/reinstalling crap and nothing fixed it. I finally downloaded the shuffle restore utility from Apple, ran that and suddenly it worked- Windows recognized it and showed as my G drive, latest itunes software linked up to it and I was able to load it up with songs for my son. I "ejected" the shuffle from within iTunes like they say you should and tried it out- plays songs fine.
I thought I'd try hooking it right back up to the computer to see if I'd found the "holy grail" of fixes for all of us Windows people that Apple doesn't seem to care about. Got a big fat "unknown device" message again...
I'm thinking that we may have to run the shuffle through the restore utility every time to get windows to recognize the shuffle. I know, you'll lose all your stored songs when you do that, but until Apple decides to provide us with a working USB driver for Windows (like every other "mass storage device" in the world has) we'll all have to suffer.It did show up as the G: drive- the only other time the G: drive shows up in the profile is when I'd connect a USB storage stick- like one of those small keychain storage devices so you wouldn't think there would be a conflict. I don't have both the Shuffle and USB storage drive plugged in at the same time.
I'll try it again and change the ipod drive letter- thanks ! -
Is it possible to set a global EQ on the Shuffle (4th Gen)?
My sport headphones are a little bass heavy, so I'd like to use the "Bass Reducer" EQ on my shuffle for all music (for use in the gym). Is this possible on the 4th gen Shuffle? I couldn't see the option to do this anywhere, but I'm hoping I've missed something.
I don't want to change the EQ on each track individually, as I don't want an EQ to apply on my other devices (iMac, iPhone etc). Basically, I need to be able to set a global EQ, or a playlist specific EQ for use only with the Shuffle.
ThanksI've spent a few hours now trying to figure this out and nothing is working.
One of the things I tried was adding a component listener to the component returned by getTableCellRendererComponent. My hope was that component must be sized before it is painted into the header. If I was able to capture the size of the component, I could store the coordinates of the individual components...However, I wasn't able to capture any of these events.
Also, I tried to override the paint method in the UI class and retrieve the coordinates of the sub components as they are painted into the header. This resulted in some odd painting behavior.
As I started thinking more and more about it, I was wondering if it is possible to rework the header so that it does not employ renderers and headers. I understand that the components are "painted" into the header instead of added to the header, because performance would suffer otherwise. However, this is just a header.
It would be so much better if I could stick some components in each column header and interact with these components in the normal manner. I looked at the JHeaderTable code and the associated UI class and don't know where to start.
Again, is it possible to subclass JTableHeader and make it so that I can add components to each component header so that I can interact with it, instead of having this non-interactive picture of a component at the top of the header?
Maybe you are looking for
-
X1 and x4 give same displacement
Hey All, I realize now that this issue should go in this discussion board. Instead of repeating, just follow this link: http://forums.ni.com/ni/board/message?board.id=250&message.id=32994&jump=true Thanks, -Andrew
-
i am using iphone5 and when sending sms within 160 characters i am getting 2 sms counts deduction & i hear the message send sound twice. what is wrong here. can some one please help me here??? APPLE need to do something here!!!!!!1
-
Transfer Itunes from PC to Mac ?
I just bought the Mac Book Pro. I have a PC and i want to transfer my itunes acount to my new mac book . how do i do that ?
-
Clear parameters at a selection screen
Hi I've a report with three parameters, but when i change one of them the value of last doesn't desappear. I try with clean [others values of parameters], but doesn't work. Can help me ? Thanks
-
Hi.. I've configured the workflow for FI Document Parking/Posting (for the BO FIPP). I'm using the standard WF WS10000051(having no customization) and its sub workflows. But when I perform an event simulation for FIPP CREATED in SWU0, I'm getting t