When the WSDL for a UFT test is updated the test becomes Unusable

Using UFT 11.5, When I have to update a WSDL that a test is using then the test becomes unusable. It will allow me to update the WSDL, change and run the test but once I SAVE it and then try to OPEN it later I get the message described below.
The only way around it is to delete the current WSDL and import a new one. This is unacceptable because before you can delete a WSDL you have to delete all of your test steps that use it. Thus, the test must be totally recreated.
The ERROR when I try to open the test is: 'One or more tests in the solution were not loaded correctly. For details see the error pane' and the error pane says: '{testname} did not load correctly. Cannot change 'Shared' schema property after it was already set or the instance. Please create a new instance'
And I cannot open a new instance because UFT does not allow more than one instance.
Help would be greatly appreciated.
CDance

That program is probably only reading the 1 in the number 10 - IOW, it isn't capable of reading a 2 digit number in front of the decimal point.
Contact the developer of that program and let them know that they have some fixin' to do.
See the PM I am sending to you. See your Inbox at the top of the forum pages.

Similar Messages

I just bought iphone 5 and my itunes says I need itunes 10.7 But when I look for upgrades it says I have the current version of itunes. HELP!

I just bought iphone 5 and my itunes says I need itunes 10.7 But when I look for upgrades it says I have the current version of itunes. HELP!

I am so sorry I am frustrating you. This is the first time I have used this community and am leanring as I go. I am not able to see the entire post that you leave, unless I look at it on my phone (email)--I am so sorry. You have no idea how much i appreciate your help. Yes, I see that I can get the later version of OS software, but its not availabe for immediate download. My only options appear to be having it shipped, or going to the store to purchase. And if you know of another way that I can access all of my itunes library music on my new phone withouth using itunes, I would love to hear about it.--thanks and again i am so sorry for frustrating you.

When I try to download the Itunes for windows, I have received always the same text box: Itunessetup.exe is not a win32 valid? what does it mean, please?

When I try to download the Itunes for windows, I have received always the same text box: Itunessetup.exe is not a win32 valid? what does it mean, please? What can I do to solve it?

In the course of your troubleshooting to date have you worked through the following document?
iTunes: Windows reports that "iTunesSetup.exe is not a valid Win32 application"

When I open the word for mac, I could not see the Turkish characters. How can I fix it?

When I open the word for mac, I could not see the Turkish characters. How can I fix it?

Ask in the MS Office forums - http://answers.microsoft.com/en-us/mac.
Good luck,
Clinton

When I run ical on my mac I get the error: The server responded with an error. The request for account "Yahoo!" failed. The server responded with "504" to operation CalDAVAccountRefreshQueueableOperation.

When I run ical on my mac I get the error:
The server responded with an error.
The request for account “Yahoo!” failed.
The server responded with
“504”
to operation CalDAVAccountRefreshQueueableOperation.
I hit "go online" and almost immediately I get the same message again. Any ideas?

I am tired of how Yahoo has gotten worse and worse. It is the ONLY account I get problems with DAILY (even after removing and re-adding). AOL will act up once in a while not taking a saved password but accepting it when OK is clicked.... But Yahoo is always responding with such errors.... Today's calendar error is:
The request (CalDAVAccountRefreshQueueableOperation) for account “Yahoo” failed.

When I search for sent mail, I only see the sender of the mail (me). I want to see the receiver. How can I change that?

When I search for sent mail, I only see the sender of the mail (me). I want to see the receiver. How can I change that?

What kind of mail? gmail?
Maybe this:
Sent folder only show senders name in mail apps

HT1349 I accidentally erased the URL for my homepage with safari in the preferences, can someone tell me what to put in there so when I click on the safari icon in my dock it will go there? thank you, kathy

I accidentally erased the URL for my homepage with safari in the preferences so can someone tell me what to put in there so when I click on the safari icon in the dock it will take me to the safari page it had when I first got my macbook pro?

Safari comes with the Apple website pre-defined, so if you want to use it as the homepage for Safari, open Safari menu > Preferences > General, and type "http://www.apple.com" (without quotes) on the homepage box. Then, close the Preferences window and Safari will be set up with this page

Error message: The data for filename was already added to the form

I recently modified an existing data-collection PDF - only mod was to add some additional pull-down menu options in two fields. I went thru the Distribution wizard, tested the revised form, added the PDF to the Responses file...everything seemed fine. Next day, I distributed the revised form, and had 22 submissions. When adding the 22 submissions to the Response file, 6 or 7 bounced with the error message "The data for <filename> was already added to the form", even though that was not true. I went back, cleared all, and added one of the "bad" files to the response form. It went in OK, but I could not add another "bad one". Although several of the forms may be submitted by the same person, the data is different in all of the submissions, plus, we've been doing this procdure for over a year and never had an issue until now.
The original form may have been created in Acrobat X, and I have Acrobat 9 Pro. Not sure if that is part or all of the answer. Thanks for any insights...I saw a posting in the Reader side, but I can't see any answers.

Hi
According to your error message, we need to verify if Microsoft SQL Server Compact appears in the
Change Data Source dialog. If not, you need to install
SQL Server Compact components for Visual Studio firstly, and if you choose to install SQL Server Compact 4.0 , you should note that SQL Server Compact 4.0 supports in Visual Studio 2010 Service Pack 1 or later versions. I recommend you to install the latest
Service Pack (SP) of SQL Server Compact, and latest SP of Visual Studio, then check if the error still occurs. For more information, see:
http://blogs.msdn.com/b/sqlservercompact/archive/2011/03/15/sql-server-compact-4-0-tooling-support-in-visual-studio-2010-sp1-and-visual-web-developer-express-2010-sp1.aspx
However if there is no problem with the installation of SQL Server Compact, it will be an issue that regards ASP.NET and website deployment. I suggest you to post the question in the ASP.NET forums at
http://forums.asp.net/ . It is appropriate and more experts will assist you.
In addition, you can review the following link:
Working with SQL Server Compact in Visual Studio：http://msdn.microsoft.com/en-us/library/gg606540(v=vs.100).aspx
Thanks
Lydia Zhang

HT203421 i buy a macbook air with my friend and i changed the apple id also.at first i can update the application but now its impossible to update the application.when i clock to update it shows the id of my fren andsomebody do you have idea to solve this

i buy a macbook air with my friend and i changed the apple id also.at first i can update the application but now its impossible to update the application.when i clock to update it shows the id of my fren andsomebody do you have idea to solve this problem.

The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You — not the previous owner — must do that. How you do it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
1. You don't own another Mac.
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. For early MBA models, you may need a USB optical drive or Remote Disc. You should have received the media from the previous owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
2. You do own another Mac.
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to create a bootable USB device and boot the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can boot from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
Once booted in Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
After partitioning, quit Disk Utility and run the OS X Installer. You will need the Apple ID and password that you used to upgrade. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
Then run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Apple customer service has sometimes issued redemption codes for these apps to second owners who asked.
If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.

After upgrade my Iphone 4 to iso5, I can't add contact and I can't access the settings for mail,contacts and calender. The moment I select the setting for Mails, Contact and Calender it will jump back to home. Can someone advice what's wrong with it?

After upgrade my Iphone 4 to iso5, I can't add contact and I can't access the settings for mail,contacts and calender. The moment I select the setting for Mails, Contact and Calender it will jump back to home. Can someone advice what's wrong with it?Problr

Dear All
i have done the same activity ( buy a new iphone 4 -> upgrade to ios5 - > configure email) with success-
than when i start to move the contacts from old mobile to iphone (using the microsim) i receive the same crash
in disgnosis e use i saw 2 dump with this title 'latestCrash-Preferences.plist and LatestCrash.plist. in each file the date is the same and i read:
Exception Tyle: EXC_CRASH (SIGABRT)
Exception code: 0x00000000, 0x00000000
Chrashed Thread: 6
in thread 6: name: Dispatch queue:
com.apple.addressBookUI.ContactsSettingPlugin
and thaan a lot of data.
Have you any idea?
thank in advance
Fabio

My battery runs low very fast (three hours). I looked in the usage settings and it seems the time for usage and stand-by are the same, allthough i did have my iphone on stand-by!! What can i do?

Community,
I have a problem with my iphone 4. Every few months my battery starts draining within a few hours. I have tried all kinds of battery saving tips, but they don't help. When i go to the settings/general/usage is can see that the time for Usage and Stand-by are the same, so my phone is fully on all the time this explains the draining. But in reallity i turn my phone to stand-by most of the time, i mean the screen is black and all???
The first and second time a had this problem, both a few months a part, i restored my phone and it was solved. This time i restored my phone but this did not help!! And restoring my phone every two months is not my preferd way of solving this problem.
Does anybody have an idea on how to solve this problem? can anybody help me?
best regards,
Merijn

Restoring is the answer. It sounds as if there is a rogue process constantly draining your battery.
The issue you face is that, if you restore your backup thereafter, you risk the problem coming straight back with your files.
Store your files individually and it is time to start fresh.

Error "The WSDL document could not be understood by the rendering engine"

I am trying to invoke a web service in an APEX page. However for various web services i get the message "The WSDL document could not be understood by the rendering engine".
For example the web service "http://mrs.cmbi.ru.nl/mrsws/blast/wsdl". This URL returns a wsdl but APEX complains about the URL.
Does anybody know a public web service to be used for tesing within APEX, based upon a WSDL file?

I am trying to invoke a web service in an APEX page. However for various web services i get the message "The WSDL document could not be understood by the rendering engine".
For example the web service "http://mrs.cmbi.ru.nl/mrsws/blast/wsdl". This URL returns a wsdl but APEX complains about the URL.
Does anybody know a public web service to be used for tesing within APEX, based upon a WSDL file?

Make the data for a registry key point to the installation folder of my app.

I have an application that creates files with a unique file extension (.myextension). These files should be associated with a particular icon so that the icon is shown when they are viewed in Windows Explorer, etc. I know how to do this when I create an installer by adding several registry keys and values under the [HKEY_CLASSES_ROOT] key as shown below.
                   key                                                name              type                                   data
[HKEY_CLASSES_ROOT]
     .myextension                                         (Default)          REG_SZ               Myextension.file.type.record
     Myextension.file.type.record              (Default)          REG_SZ               Text description of file type
               DefaultIcon                                  (Default)          REG_SZ               path to the icon file.
The key for the file extension record (.myextension) has a default value where the data points to the key for the file type record (Myextension.file.type.record). The data for the default value of the Myextension.file.type.record key is just a description for the file type. There is also a subkey called DefaultIcon. The data for it's default value is the path to the file containing the icon that is to associated with the file type. If the file contains more than one icon, it may be necessary to modify the data (path) to indicate which icon to use.
So, this is all good if path to the file containing the icon is known. I added an icon file to the build when I built my application and it will be installed in a known location within the directory where my application is installed. The location is [InstallDirectory]data\myicon.ico, where [InstallDirectory] is the directory where my application is installed. The installation process, including the addition of registry keys is handled by an installer that I have created. The problem arises when the user choses to install to a location other than the default directory specified in the installer. I can't know before hand where that will be. How can I specify the path in the DefaultIcon key so that it points to the correct location after installation? Is there some symbol that I can use for the installation directory so that the path will be set correctly at installation time?

Hi cbfsystems,
If correctly understand what you are trying to do, check this out. This shows you how to add a user-specified install directory to a registry entry in the installer build spec.
Cheers,
Brian A.
National Instruments
Applications Engineer

How do I delete an iCloud account from my iPad that I no longer know the password for and have no access to the email account to change it?

How do I delete an iCloud account from my iPad that I no longer know the password for and have no access to the email account to change it?

You will need the password. If you can't get it reset via http://iforgot.apple.com (if you remember the answers to the account's security questions then you should be able to reset it via them) then try contacting Support in your country, they should be able to reset it.
Contacting Apple about account security : http://support.apple.com/kb/HT569
If your country isn't on that page then try this form and explain and see what they reply with : https://ssl.apple.com/emea/support/itunes/contact.html

My granddaughter put the Start Up Disk in the drive inadvertently and now the drive will not eject it or start up using the HD. I have tried all of the suggestions for opening it that appear in the manual. Help?

My granddaughter put the Start Up Disk in the drive inadvertently and now the drive will not eject it or start up using the HD. I have tried all of the suggestions for opening it that appear in the manual. Help? It is her computer, a iMac G3 or G4 with superdrive, the one with the ball shaped base. Thank you.

It's a tray loading drive, there should be a little hole next to it, just large enough for a paper clip. Stick the end of the paper clip in it and the tray should open.
Miriam

When the WSDL for a UFT test is updated the test becomes Unusable

Similar Messages

Maybe you are looking for