When there are more than 20 bookmarks in a folder, sort settings are not saved
I have several bookmark folders that contain more than 20 bookmarks each. If I apply a sort to any of these folders, the bookmark sort is lost after I close the browser. If I reduce the number of bookmarks to less than 20, or create a subfolder and move bookmarks to it, the sort remains between sessions.
There are other things that need your attention.
Your above posted system details show multiple Java Console extensions.<br />
You can uninstall and remove Java Console extensions, you do not need them to run Java applets.
See:
* http://kb.mozillazine.org/Java#Multiple_Java_Console_extensions
Disable the Java Quick Starter extension: Tools -> Add-ons -> Extensions
* Control Panel -> Java -> Advanced tab -> Miscellaneous -> Java Quick Starter (disable)
See:
* http://www.java.com/en/download/help/quickstarter.xml - What is Java Quick Starter (JQS)? What is the benefit of running JQS? - 6.0
You may also want to reset some excessive connection settings (about:config) that show in your More system details list. Website Administrators usually do not like such tweaks.
network.http.max-persistent-connections-per-server 102
network.http.pipelining.maxrequests 30
Similar Messages
-
I have the HTC Droid Incredible 4G LTE (ICS/4.0). It has 3.63 GB phone storage remaining, and the sd card has 7.35 GB remaining. Forget the sd card. How can my phone, or any phone for that matter, get the error message of "insufficient space on device" when there's more than enough space on the device? Thank you in advance.
Turn off your phone.
Hold power - and volume up I believe It might be down.
From there you can select recovery and then hold vilume up and tap power to open the menu.
There should be an option there to clear system cache. -
Airport disconnects when there's more than one device
I've got a really weird problem.. I have an Apple Airport Extreme 802.11n 3rd Generation. Software version 7.6 When more than one device connecrts to the base station it will disconnect everyone and then all devices will go into a connect/disconnect loops. Rapidly. This occurs only with wireless device. I watched the radar on my iPhone (5.1), Macbook running Snow Leopard, Macbook Air running Lion, and iPad 2 (5.1) blinking on and off, on and off. The only way to resolve this is to just have ONE person connect at a time.
Things I've tried:
1) Updating all software on all devices
2) Updating Airport firmware
3) Reboot and then restoring factory settings on the Airport when the reboot didn't work
4) Turning off encryption (WP2)
5) Making sure there are enough IP's for all the devices, turning off robustness, making sure the router is visible.
Because I know someone will ask this: The Airport sits atop a credenza in the open air. Nothing on, around, or above it. It's been in this position for months with no problem. It's not overly warm to the touch and I even used compressed air to blow out the vents (just in case) when this problem began.
I read once upon a time that the router gets a cache built up and that can cause these types of issues, but I have no idea how to delete said cache or even if it exists. It's just odd this only happens when more than one wireless device tried to connect to the network.
Thoughts?I've resolved this! For some odd reason Apple won't let me denote this so I'm adding this reply. Turns out the problem was POWER related. The Airport was plugged into a power strip with several other devices. I unplugged all of those leaving just the Airport and the problem has not returned. If I add on all the devices, regardless of the power strip used, the problem returns. So it appears the Airport was just not getting enough power.
I've got it on a UPS now and the problem has not returned. -
How to automatically log in on a MacBook Pro when there is more than one user
We have 4 users on our MacBook Pro.
How can we switch between users without having to log on each time?
I have found the "Disable Automatic Login" option in Systems Preferences have have unchecked it but I still get asked each time we switch between users - is this setting universal for all users once set, or does it need to reset when in each user profile?
Thank youYou are correct about iPhoto - sorry. It does look like local sharing has been removed in favour of iCloud sharing. It's something I did so rarely that I thought it was still there. You can export & copy items between libraries but it is less useful now (I'm not a fan of iCloud).
User home folders are designed to prevent other users seeing your stuff. It's why each user gets their own password.
You can give another user files via their /Users/username/Public/Dropbox folder (or go via the /Users/Shared).
The 'Shared' folder is within /Users - that can be used for all users. Some apps store media in there when it is needed by all users (Apples Motion did this for a while).
Applications are 'system wide' so any user can use them so long as they have access to that folder - all users have access to /Applications by default.
To be honest the default behaviour is generally setup correct with all of this… just install apps to /Applications & all users can use them.
If you need some privacy - put it in your home folder.
If you need everyone to access - put it in shared.
If you are having to think hard about how to make something work you may be going about it wrong - ask for a sanity check of your workflow via these discussions -
Not Enough Free Space when there is more than enough
My ipod's capacity is 6GB but when I go to update it, i-tunes won't let me because it says there is not enough free space. I'm only trying to update 3.3GB onto my ipod. Can I get around this somehow?
You can try restoring the ipod, this wipes it clean and itunes adds it all back UNLESS you don't have the files/songs on the PC
-
I am trying to import an excel file ... see below. It appears if you select both Tasks and Assignments tables it will not allow you to do this, says file is not in a project recognized format. So I import Tasks tab first then run the
wizard again and import the assignments tab while selecting merge with project option. This works with one exception:
If there are more than one assignment per task. It does not merge in the 2nd assignment, only the first.
Is there a way to import a task with 2 or more assignments?
Background
To figure out what the format for the file needed to be, I started with a MPP file and from project saved as Excel and selected the "Project Template" file. Now I am trying to import that XLS to see how it works
ID
Active
Task Mode
Name
Duration
Start
Finish
Predecessors
Outline Level
1
Yes
Auto Scheduled
DS001
3 days
June 17, 2014 8:00 AM
June 19, 2014 5:00 PM
1
2
Yes
Auto Scheduled
MT001
3 days
June 17, 2014 8:00 AM
June 19, 2014 5:00 PM
2
3
Yes
Auto Scheduled
CT001
1 day
June 17, 2014 8:00 AM
June 17, 2014 5:00 PM
3
4
Yes
Auto Scheduled
CT002
2 days
June 18, 2014 8:00 AM
June 19, 2014 5:00 PM
3
3
5
Yes
Auto Scheduled
DS002
1 day
June 20, 2014 8:00 AM
June 20, 2014 5:00 PM
1
6
Yes
Auto Scheduled
MT002
1 day
June 20, 2014 8:00 AM
June 20, 2014 5:00 PM
2
7
Yes
Auto Scheduled
CT003
1 day
June 20, 2014 8:00 AM
June 20, 2014 5:00 PM
4
3
Task Name
Resource Name
% Work Complete
Work
Units
CT001
Engineer1
0
8h
100%
CT002
Engineer2
0
16h
100%
CT003
Engineer1
0
8h
100%
CT003
Engineer2
0
8h
100%
Andrew PayzeAndrew,
I did a quick test using your example although I didn't include the Predecessor or Outline Level fields to keep things a little simpler. I imported the Excel data into a new Project file with a single import of task and assignment data. It is very important
to set up the Excel Workbook correctly. On Sheet 1 I entered the task data (Name, Duration, Start). I did not include the ID or finish date as that is redundant - Project generates its own ID and will calculate the finish date based on the start date and duration.
On Sheet 2 I entered the assignment data basically just as you show it except I didn't include the Units.
The data imported as expected.
John -
Hi
I am combining 2 related records of legacy data together that make up a marriage record. I am doing this in APEX using a before header process using the following code below which works well when there are only 2 related records which joins the bride and groom record together on screen in apex. I have appended a field called principle which is set to 'Y' for the groom and 'N' for the bride to this legacy data
However there are lots of records where in some instances there are 3, 4 , 5, 6 or even 1 record which causes the PL/SQL in APEX to not return the correct data. The difference in these related columns is that the name of the bride or groom could be different but it is the same person, its just that from the old system if a person had another name or was formally known as they would create another duplicate record for the marriage with the different name, but the book and entry number is the same as this is unique for each couple who get married.
How can I adapt the script below so that if there are more than 2 records that match the entry and book values then it will display a message or is there a better possible work around? Cleaning the data would be not an option as there are thousands of rows of where these occurrences occur
declare
cursor c_mar_principle(b_entry in number, b_book in varchar2)
is
select DISTINCT id, forename, surname, marriagedate, entry, book, formername, principle
from MARRIAGES mar
where mar.entry = b_entry
and mar.book = b_book
order by principle desc, id asc;
rec c_mar_principle%rowtype;
begin
open c_mar_principle(:p16_entry,:p16_book) ;
fetch c_mar_principle into rec;
:P16_SURNAME_GROOM := rec.surname;
:P16_FORNAME_GROOM := rec.forename;
:P16_ENTRY := rec.entry;
:P16_BOOK :=rec.book;
:P16_FORMERNAME :=rec.formername;
:P16_MARRIAGEDATE :=rec.marriagedate;
:P16_GROOMID := rec.id;
fetch c_mar_principle into rec;
:P16_SURNAME_BRIDE := rec.surname;
:P16_FORNAME_BRIDE := rec.forename;
:P16_ENTRY := rec.entry;
:P16_BOOK :=rec.book;
:P16_FORMERNAME :=rec.formername;
:P16_MARRIAGEDATE :=rec.marriagedate;
:P16_BRIDEID := rec.id;
close c_mar_principle;
end;rambo81 wrote:
True but that answer is not really helping this situation either?
It's indisputably true, which is more than can be said for the results of querying this data.
The data is from an old legacy flat file database that has been exported into a relational database.
It should have been normalized at the time it was imported.
Without having to redesign the data model what options do I have in changing the PL/SQL to cater for multiple occurances
In my professional opinion, none. The actual problem is the data model, so that's what should be changed. -
Page HTML Body Attribute - can there be more than one in this area?
In "Oracle Database Application Express Advanced Tutorials", Release 3.0, B32469-01 on page 10-10, in the section labeled "Create a Call to the disFormItems Function" in step 6........it reads:
//start citation
In the Page HTML Body Attribute, enter the following:
onload="disFormItems(); first_field();"
//stop citation
My questions are:
Can there be more than one "onload" statement?
If yes, how do you string them together?
Assume the second function I want to add is "disFormItems_local()"
Thank you,
MaggieOkay, I have figured it out, I believe. So, I will provide my own answer in case someone else is looking for this type of situation in the future.
I edited the page definition by adding another function, disFormItems_local(), to the HTML Header Attribute.
Next, I edited the item's HTML Form Element Attributes to call the function, onchange="disFormItems_local()"
Then, I created a call to the disFormItems_local function in the page HTML Body Attribute, onload="disFormItems(); first_field(); disFormItems_local();"
Other stuff that you will need to know is to be found in Chapter 10 page 8, Enabling and Disabling Form Elements of the 3.0 Advanced Tutorials. -
I have a problem with itunes when I sync the saved music and want to sync my iphone 5 ios 7.0.6 no longer passes the music thing is that just stays on "waiting for sync" and not worry please help are more than 400 songs that do not want to hear who are wi
Plawexki wrote:
... do you know if the contacts, photos, messages etc will be wiped?
Yes... Everything will be Wiped and Replaced with what is currently on Your Mac.
SYNCING with iTunes
See here > http://support.apple.com/kb/HT1386
From Here > http://www.apple.com/support/iphone/syncing/
You may find this information of interest...
Have a read here...
https://discussions.apple.com/message/18409815?ac_cid=ha
And See Here...
How to Use Multiple iDevices with One Computer -
My hard drive has 70.93 GB available, yet when i have more than one internet tab open, i have to force quit google chrome because 'there is no more available application memory'. How can I solve this? I have a 2009 macbook pro running on 10.6.8. I have tried updating to mavericks through the mac app store but after it downloading for a day i got an error message saying there was a problem with the download. The same thing happens if i try to update itunes or the mac app store. After research, i have also tried repairing disk permissions, but every time they do get repaired the 'repair' button still appears, i'm not sure if it's because it was unable to repair the initial problems or if it just keeps detecting new ones.
2 GBs is a minimum in which you can do many things, but not concurrently. Be very careful to not install third-party add-ons, limit the number of applications you choose to enter in Login Items, run as few applications concurrently as you demand.
I would consider adding more RAM to your computer. Your model supports 8 GBs, so I would install that. -
There are more than 70 new iPhones in boxes have been stolen so there are ways to locate them please ur support urgent
i have informed the police but they said the device could
be tracked if it turn on by its depend on serial numbers
Re: There are more than 70 new iPhones in boxes have been stolen so there are ways to locate them please ur support urgent -
I can't download an app as it says there is insufficient space but when I look on settings there is more than 2GB storage available and the app is only 1
An app can need twice the quoted space just during the installation. That could be the problem. It's easy enough to offload some stuff for the insyallation then sync it back.
-
When I have more than one tab open, if I click on a picture to view/enlarge, say eBay, and I click on the items photo to enlarge it, when the window opens to view the photo, Firefox crashes. I also notice while looking at a web page, the pinned tabs to the left of the bar are constantly reloading for some reason, The green circle starts going round and round for no reason even though the tab is not being viewed. Both problems seem to have started after the last software update.
See:
* http://kb.mozillazine.org/Firefox_crashes
* https://support.mozilla.org/kb/Firefox+crashes -
Can there be more than one initiator in a shared review?
We use Acrobat X Pro to do shared reviews of pdf documents. At times, the initiator will be out of the office when someone needs to take action on the document and it would make it more convenient if there was more than one person with access. Is it possible to assign two people as the "initiator" of the documents so that there will always be one available?
No, sorry.
If you're using email or own-server-hosted reviews there's nothing (technically) to stop another person signing on using the initiator's identity provided they know the password. If you're using Acrobat.com to host the reviews, and so the participants are using Adobe IDs, then in a legal sense you can't because the terms of use for an AdobeID do not allow shared access. -
Short dump when we write more than 4 routines or formulas 4 one source fld
Hi Experts ,
We have one source field in a DSO which supplies data to 9 other characteristics present in the cube via formulas. But the system throws a short dump when we write more than 4 routines or formulas.
Please let us know if there is any restriction in BI 7 as to let only 4 formulas to be written for one source field.
The below is the description of the short dump
RUNTIME ERROR : SAP SQL_ARRAY_INSERT_DUPREC
EXCEPTION : CX_SY_OPEN_SQL_DB
Help done would be assigned points ...
Thanks,
Santosh ...Hi,
thanks for your input
Rd, rt,re and rs are ranges.
Select ranges
RANGES: rd FOR ZMOBILEDATA-COMPID,
rs FOR ZMOBILEDATA-SUBSCRIBERS,
rt FOR ZMOBILEDATA-TURNOVER,
re FOR ZMOBILEDATA-ENTRYDATE.
thanks'
Maybe you are looking for
-
How can I use Automator or AppleScript to get text from a web page and paste it in execl?
I don't know how to make scripts or complexed automator workflows... that's why I'm asking. I'm trying to make a simple app or script to ask me what text to extract from a web page, like name, address and phone number of a web page and paste each one
-
Computer that was originally synced with Apple TV has crashed
the computer that was originally synced with apple tv has crashed, but the photos and music that was loaded, i don't want to lose them. Is there a way to recover it to my other computer or its just stuck on apple tv until deleted. In itunes also my a
-
[SOLVED] mplayer says that the system is too slow?
I've noticed that mplayer has been complaining that my system is too slow to play videos lately. mplayer CLI output: AVI file format detected. [aviheader] Video stream found, -vid 0 [aviheader] Audio stream found, -aid 1 VIDEO: [XVID] 640x352 12bpp 2
-
How do I disable an app's recent documents?
When I secondary click an app in my Dock, it brings up a menu with a list of recently opened documents. How do I disable this so it doesn't display these?
-
Exchange Server 2013 SP1 - Readiness Check Failing - Detected Non-existent Exchange 2007 Servers
For development purposes, I needed to install Exchange Server 2013 in our environment. Our current environment includes a couple Domain Controllers, a Sharepoint Server, and a SQL Server. So, it's got a very simple topology. The one thing our envi