When to clone both appl and Db.

Hi,
I have 10g DB and R12.0.6 ebs PROD we use to clone TEST instance as of PROD when developers or consultants request for a TEST instance same as PROD.
My Question is.
What are the scenario in which :
1)I need to clone only DB and just run autoconfig on Appl.
2)I need to clone both DB and Appl.
3)if there's any business setups like budget are done in prod , then if we need a clone do i need to clone both DB and Appl. or just DB is enough.
4) what if no patch is applied to appl since last clone.
Reg

1)I need to clone only DB and just run autoconfig on Appl.>> It basically means you are refreshing db only. Ideally when you are aware that you have not done any changes on application files on source then you can take this route.
2)I need to clone both DB and Appl. >> When you want every changes i.e. wether on apps filesystem or in db to be replicated i.e. suppose you have moved a code fix in live that includes a change in form, report and some code compilation in database, now you need complet clone to see changes in test.
3)if there's any business setups like budget are done in prod , then if we need a clone do i need to clone both DB and Appl. or just DB is enough.>> Not sure but cloning whole is always benifical.It means you are in sync with data and files on apps tier.
4) what if no patch is applied to appl since last clone. >>You might have changed some fmb's, reports etc etc but if you are sure no changes are made then you can refresh db only.
Thanks,
JD

Similar Messages

I have problems with my films that become slightly jerky after I have imported and edited them in iMovie and then burned them onto a DVD using iDVD. I can see the weak jerkiness when panning in both laterally and vertically. I shoot with a camcorder Canon

I have problems with my films that become slightly jerky after I have imported
and edited them in iMovie and then burned them onto a DVD using iDVD.
I can see the weak jerkiness when panning in both laterally
and vertically.
I shoot with a camcorder Canon Vixia HF10. The camera has been set to deliver HD quality (1920x1080). But I have accidentally filmed with a frame rate of 60 (?).
When I import the films in iMovie I have been asked if I want to change to frame rate 30 (instead of 25). I have chosen 30.
Could it be the setting of a frame rate 60 in my camcorder that causes jerkiness when panning or what else?

I have problems with my films that become slightly jerky after I have imported
and edited them in iMovie and then burned them onto a DVD using iDVD.
I can see the weak jerkiness when panning in both laterally
and vertically.
I shoot with a camcorder Canon Vixia HF10. The camera has been set to deliver HD quality (1920x1080). But I have accidentally filmed with a frame rate of 60 (?).
When I import the films in iMovie I have been asked if I want to change to frame rate 30 (instead of 25). I have chosen 30.
Could it be the setting of a frame rate 60 in my camcorder that causes jerkiness when panning or what else?

All my PC's and computer(both Apple and Microsoft) will conect to internet except appleTV I have exhausted all resets, It did work yesterday now no connection

All my PC's and computer(both Apple and Microsoft) will conect to internet except appleTV I have exhausted all resets, It did work yesterday now no connection Has anyone had same problem ?

Resets are not a solution. Have you done any actual trouble shooting? What is the actual symptom you are experiencing? If you are using WiFi have you tried directly connecting it using a wired connection.

Is the single edition app that comes with creative cloud just for apple publishing or can I publish on both apple and android?

Is the single edition app that comes with creative cloud just for apple publishing or can I publish on both apple and android? I'm only seeing information on apple intergration.

You’ll need either a Pro or Enterprise account. And you will have to publish any non-iPad app as multi folio. Single edition, regardless of your plan, is iPad only.

What does it mean when you get an Apple and a grey status bar during start up of a MacBook Pro?

When I start up my MacBook Pro I get an Apple icon and a grey status bar. Some days the start up goes really fast and other days it takes a few minutes for the computer to start up. My laptop never used to do this. It started a month ago. Is there something I should do to resolve this? Below are my computers spec's:
OS X Yosemite V 10.10.1
MacBook Pro (15-in, 2.53GHz, Mid 2009)
Processor: 2.53GHz Intel Core 2 Duo
Memory 4 GB 1067 MHz DDR3
Start up Macintosh HD
Any help someone can provide me would be greatly appreciated. Thank you in advance!!

The boot progress bar with progress bar with a dark background is a new feature for Yosemite and appears for seconds before the desktop loads. It is normal that "some days it goes really fast". Yosemite is heavier than Mavericks and as a result the boot time is slightly longer. On Mavericks it was a little wheel that spun, now it is a progress bar.

Will the Apple Time Capsule back up both Apple and Windows in a Virtual macine

Will Apple Time Capsule back up Windows as well as Apple data in a virtual machine with Parallels?

Windows home version MSBackup, cannot backup to network drives.
That was a little bonus from Bill for those who didn't fork out for Pro or Ultimate.
Like people with home versions would never need to backup to network drives.. oh no.. never!!
You need to mount the hard disk in windows for it to work.
It will help a lot if you load the airport utility for windows into your windows OS.
http://support.apple.com/kb/dl1547
Open windows explorer and type the network address of the TC.
\\TCname.local (where TCname is the correct network name of the TC).
The TC should have all names that are windows compatible.. ie
Fred Blog's Airport Time Capsule is just wrong. It is too long, it has spaces and it has apostrophe which is illegal.
A good name for the TC is TC
The default hard disk share name of data is fine. It should not be Time Capsule or anything again that is over long .. has spaces or is otherwise incompatible with windows.
A good name for the TC wifi is TCwifi
Then you can mount it \\TC
typing that directly into the address bar of windows explorer.
There are still issues with windows naturally and running in parallels I have no idea what other issues might come up.
Tell me if you have issues.. but you will need most likely to check the network.
Open a command window and ping the TC by name and by IP address. If IP address works just mount by IP.
\\10.0.1.1 for example .. and that is the default TC IP address when in router mode.
If you still cannot access the TC my recommendation is to use a USB drive and use that.. it is 10x easier and more reliable than mixing Mac and windows backups on the TC.

Best-practice for use of object styles to manage image text wrap issues when aiming at both print and EPUB output?

I have a work-flow question about object styles, text-wrap, and preparing a long document with lots of images for dual print/EPUB output in InDesign CC 2014.
I am sort of experienced with InDesign but new to EPUB export. I have hundreds of pages and hundreds of images so I'd like to make my EPUB learning curve, in particular, less painful.
Let me talk you through what I'm planning and you tell me if it's stupid.
It's kind of a storybook-look I'm going for. Single column of text (6" by 9" page) with lots of small-to-medium images on the page (one or two images per page), and the text flowing around, sometimes right, sometimes left. Sometimes around the bounding box, sometimes following the edges of the images. So in each case I'm looking to tweak image size and placement and wrap settings so that the image is as close to the relevant text as possible and the layout isn't all wonky. Lovely print page the goal. Lots of fussy trade-offs and deciding what looks best. Inevitably, this will entail local overrides of paragraph styles. So what I want to do, I guess, is get the images as closely placed as possible, before I do any of that overriding. Then I divide my production line.
1) I set aside the uniformly-styled doc for later EPUB export. (This is wise, right? Start for EPUB export with a doc with pristine styles?)
2) With the EPUB-bound version set aside, I finish preparing the print side, making all my little tweaks. So many pages, so many images. So many little nudges. If I go back and nudge something at the beginning everything shifts a little. It's broken up into lots of separate stories, but still ... there is no way to make this non-tedious. But what is best practice? I'm basically just doing it by hand, eyeballing it and dropping an inline anchor to some close bit of text in case of some storm, i.e. if there's a major text change my image will still be almost where it belongs. Try to get the early bits right so that I don't have to go back and change them and then mess up stuff later. Object styles don't really help me with that. Do they? I haven't found a good use for them at this stage (Obviously if I had to draw a pink line around each image, or whatever, I'd use object styles for that.)
Now let me shift back to EPUB. Clearly I need object styles to prepare for export. I'm planning to make a left float style and a right float style and a couple of others for other cases. And I'm basically going to go through the whole doc selecting each image and styling it in whatever way seems likeliest. At this point I will change the inline anchors to above line or custom, since I'm told EPUB doesn't like the inline ones.
I guess maybe it comes down to this. I realize I have to use object styles for images for EPUB, but for print, manual placement - to make it look just right - and an inline anchor seems best? I sort of feel like if I'm going to bother to use object styles for EPUB I should also use them for print, but maybe that's just not necessary? It feels inefficient to make so many inline anchors and then trade them for a custom thing just for EPUB. But two different outputs means two different workflows. Sometimes you just have to do it twice.
Does this make sense? What am I missing, before I waste dozens of hours doing it wrong?

I've moved your question to the InDesign EPUB forum for best results.

I have both Apple and Android devices. My Android devices will not stay connected to wireless . I have the Airport Express. The Android devices are a Galaxy S4 and Tab 3. These both worked perfectly on my ancient Linksys WRT 120 N wireless router.

I have called Apple support twice and no one can confrm or deny as to whether Android devices can connect with the Airport Express. I have had the it configured 3 times so far and my Galaxy S4 and Galaxy Tab 3 7.0 are useless with the Airport Express.

BTW what did you mean by using my old wireless router as a AP?
Every Wireless router ever made is actually made of two components..
A router and a wireless AP. (AP = Access Point).
To use any wireless router as a AP you simply bypass or turn off the router..
In an Apple router this is called Bridge mode..
In many routers it is known as AP or WAP mode.
But often they do not have the option..
Set it up manually.. we call this WAN bypass as it will bypass the router.
So what you do is open your wireless router setup page in your browser.. go to the LAN setup page.
You need to do two things.
1. Turn off the dhcp server.
2. Set the LAN IP to match the main router..
For instance if your plug it into your apple router and it is at the default IP.. 10.0.1.1 then set the Linksys to 10.0.1.254
The Linksys is then updated.. Plug the ethernet cable from LAN port apple router to LAN port WRT120 (not WAN)
Now with a computer plugged into the apple router or into the Linksys .. by ethernet.. open the IP address you just set.. go to the wireless tab in the setup and give the wireless SSID a suitable name for your other (non-apple) products.. voila.. you have now turned a wireless router into an AP.

ITunes Keeps Crashing When I'm Both downloading and in the Store

It seems it can't handle the high CPU usage, which is silly. It should be able to. Any idea what it maight be?

I don't want to be the bringer of bad news, but these where the symptoms I was getting just before my iPod's hard drive failed (80gb classic).
I tried to restore it, and that seemed to work for a few days. But then it just stopped responding to iTunes, locking up iTunes, and finally wiped its own memory then nothing.
It powered up ok, but did noting else.
It was years out of warranty, getting it repaired by Apple is never cost effective. so I sold it on eBay and upgraded to a new 160gb.
I'm not giving you a definite reason, just my experience.

IPhone 4s auto shutdown into dfu, when restore, stuck at apple and progress bar at 0%

I have a iPhone 4s running ios7 autoshut down and go into DFU mode. I try to resture using iTunes but only get as far as the apple logo and progress bar at 0%. Please help!

Hello,
this Solution fixed my Problem.
http://www.reddit.com/r/jailbreak/comments/1v6zkz/how_to_fix_boot_loop_without_l osing_data_stuck_on/
I restored my iphone to ne newest iOS7.1.1 without losing my preferences, passcode, photos, music, pdf, ibooks, apps and app data and so on. After Restoring i saved the app data and photos with the tool itools.
I think its a good solution for people, which not backup there data with itunes and icloud.

How do I export from PDF to Word when PDF has both portrait and landscape pages in it?

Most of the pdf is in portrait but a few are in landscape in the middle of the document and it totally screws up the rest of the document. Help! AND the portrait page size is 8.27 x 11/69.

Looks like you have A4 pages. I would copy the PDF and then rotate the landscape pages (or portrait) individually (use the tools, not the view rotation) and then do the save to DOC or DOCX. That might do what you want. I would have expected it to notice the orientation, but I guess not. You did not mention the version of Acrobat. If you have not done the updates, you may want to do those first. Your issue may have been address with the updates.

TS3367 my facetime as stopped working i have a new iphone c set up to my apple account but i also have an ipad set up with the same account is this the reason my facetime is not working. When i get someone to facetime me both ipad and iphone try to conne

I use facetime on my ipad and i now have a new iphone c, when setting up my iphone i set it to the same apple account as the ipad, I now cannot use facetime I have tried to facetime a friend and I have also asked them to facetime me but when they do both iphone and ipad try to connect but both fail. Can you have more than one iso device logged into the same account.

Yes, I have both my iPhone and my iPad logged in all the time. Have you tried logging out and then logging back in? Here is an article that may help:
iOS: Troubleshooting FaceTime

Codec for HDV to share between apple and pc??

our boss got us 2 G5s and a PC workstation, we can now only share movie files in uncompressed format between different platforms which costs a lot of disk space
is there a CODEC which can be used in both APPLE and PC that encodes HDV in relatively smaller file?
G5 Dual 2.7GHz Mac OS X (10.4.7) FCP 5.04

i'm sure there's codec that use RLE could be
lossless: ]
but this is not what i want.
i just need the codec that could be shared between
mac and windows and keep most of the quality of HDV
and compression ratio is close to HDV codec itself,
When analog signals are converted into HDV digital data inside the HDV camera, your video is no longer lossless. It's not lossless because HDV is based on MPEG-2, which is not lossless. So, I don't mean to insult you, but your comment is self-contradictory.
or may i ask is there a HDV codec which could be use
both in mac and windows?
HDV is a codec, so the answer is HDV. Or... As I said before, H.264 may be used to further recompress high-definition video.

How to spin an object with both x and z-rotation in M3G?

I want to spin an object with both x and z-rotation in M3G. I get a good result when I implement this in OpenGL, but the combined rotation doesn't get right when I try to do this in M3G. The x rotation and the z rotation looks like they should when I only use one of them. This is achieved by adding only spinAnimationTrack or rotationAnimationTrack. The problem is that the rotation gets messed up when I add both spinAnimationTrack and rotationAnimationTrack. What am I doing wrong? This is my code:
KeyframeSequence spinKeyframes =
new KeyframeSequence(3, 4, KeyframeSequence.SLERP);
spinKeyframes.setRepeatMode(KeyframeSequence.LOOP);
spinKeyframes.setDuration(4000);
spinKeyframes.setKeyframe(0, 0,
getRotationQuaternion(-50.0f, new float[]{1.0f, 0.0f, 0.0f}));
spinKeyframes.setKeyframe(1, 2000,
getRotationQuaternion(50.0f, new float[]{1.0f, 0.0f, 0.0f}));
spinKeyframes.setKeyframe(2, 4000,
getRotationQuaternion(-50.0f, new float[]{1.0f, 0.0f, 0.0f}));
AnimationTrack spinAnimationTrack =
new AnimationTrack(spinKeyframes,
AnimationTrack.ORIENTATION);
AnimationController animatorS = new AnimationController();
spinAnimationTrack.setController(animatorS);
animatorS.setSpeed(0.4f * speed, 0);
KeyframeSequence rotationKeyframes =
new KeyframeSequence(2, 4, KeyframeSequence.SLERP);
rotationKeyframes.setRepeatMode(KeyframeSequence.LOOP);
rotationKeyframes.setDuration(4000);
rotationKeyframes.setKeyframe(0, 0,
getRotationQuaternion(359.0f, new float[]{0.0f, 0.0f, 1.0f}));
rotationKeyframes.setKeyframe(1, 4000,
getRotationQuaternion(0.0f, new float[]{0.0f, 0.0f, 1.0f}));
AnimationTrack rotationAnimationTrack1 =
new AnimationTrack(rotationKeyframes,
AnimationTrack.ORIENTATION);
rotationAnimationTrack1.setController(animatorR1);
animatorR1.setSpeed(0.4f * speed, 0);
mesh1.addAnimationTrack(spinAnimationTrack);
mesh1.addAnimationTrack(rotationAnimationTrack1);

People often make this harder than it is. It's usually not necessary to using clipping paths or to make cuts confined to the areas of overlap to make objects appear to intertwine. Usually, you can simply cut where objects do not overlap. There are no masks, clipping paths, pathfinders, etc., involved in this knot:
Your specific situation may be somewhat complicated by the use of drop shadows, depending on the specific parameters.
JET

HT204053 I have an iphone 5 and an apple and an icoud address or ID for itunes and icloud on that so do i need to download itunes on this PC?

I have an Apple ID and Email addresses for both Apple and icloud so i am wondering if i can download free movies or shows ect online thru the itunes app using my Apple ID without having to download itunes on this PC as well as my iphone 5? Anyone help me please? Thanks

Thanks for telling me to install itunes on this PC since i didnt want to do it by mistake and nobody here knows for sure.Thanks again!

When to clone both appl and Db.

Similar Messages

Maybe you are looking for