When to Expect Delivery?

Here is a question for all those who have previously pre-ordered an iPhone from Apple.
I pre-ordered the 32GB 3GS yesterday (June 8) for home delivery. Currently, under shipping estimate it says "Delivered by June 19". What exactly does that mean? In the past, did it arrive on the release date, or before or after?
The reason I ask is that I am actually going out of town that weekend, and want to make sure the iPhone either gets to me before the 19th, or I can have it delivered to a friend's address. I think it needs a signature, and I don't want it to get sent back for lack of one!!!

Today's email from Apple:
To Our Valued Apple Customer:
Thank you for your recent iPhone 3G S purchase at the Apple Online Store.
Due to a technical error, we communicated an incorrect delivery date.
We want to assure you that your iPhone 3G S will deliver on June 19th. You can
track the status of your order at <www.apple.com/orderstatus>.
We appreciate your business, and apologize for any inconvenience.
Sincerely,
Apple Online Store Team

Similar Messages

My expected delivery of Iphone 6 plus is OCT 13 to OCT 20. when can I expect it to get delivered ?

Hello My expected delivery of Iphone 6 plus is OCT 13 to OCT 20. when can I expect it to get delivered ?

suhaschowdary wrote:
Hello My expected delivery of Iphone 6 plus is OCT 13 to OCT 20. when can I expect it to get delivered ?
Between Oct 13 to Oct 20.
You should also be sent a tracking number once your packaged is ship, so you can track it.

When manually creating delivery notes, the Actual GI time ?

Hello,
When manually creating delivery notes, the Actual GI time (used for pricing determination) is set to the document creation time (CPU time) but expressed in the UserId's local time zone.
Regards,
Neel

Hello Ram
Please help me out to solve this issue
When manually creating delivery notes, the Actual GI time (used for pricing determination) is set to the document c
Creation time (CPU time) but expressed in the UserId's local time zone.
The correct Actual GI time should be the CPU time in CST time zone, independant of the user.
The Delivery doc. was created on 04/20/2011 at 11:11:32 UserId's local time zone (CET).
The Actual GI time was set per default to 11:12 based on CET CPU time the expected time is 04:12 CST
Edited by: neeljasani on Apr 27, 2011 5:20 PM

Change in Expected Delivery date (EDD) field in the PO after final release

Hello Experts,
There is a business requirement, whereby after PO final release is completed & when the PO is released for further processing, no further changes should be possible, except for the expected delivery date (EDD) field in the Delivery schedule tab of the PO Item details. Other than this, no changes should be possible in the PO, neither qty, nor price, not even the simple PO text should be allowed to get changed. In other words no field should be allowed to change.
Ideally, except the EDD field, other all fields should be in grey mode, or atleast changes in any of the PO fields (except EDD) should not be allowed to get saved after the PO is final released.
Please let me know if SAP provides any such facility, whereby you can selectively choose certain fields (like EDD field) on which Release Strategy should not be applied & changes should be allowed in these fields even after PO final release.
Thanks in advance,
Zafar.

If you go to OMET transciton and here you can assign the field selection key in the field FieldSe
and assing the User parameter EFB in user id of the user using SU3 transction
for more help see below
Create a Functional Authorization in the Following path:
Material Mangement - Purchasing - Authorization Management - Define Functional Authorization for Buyers
Now, in SU3 trxn ,Give the User Parameter EFB in the user master Parameters Tab and give the parameter value.
create the fields selction which you want use here in PO field seleciton config.

Reset commitments for expected delivery costs

Hi guru's,
after i have implemented note 733733 I finally got SAP to reset commitments after setting the 'Final Invoice' indicator in the PO.
Only it does not reset the commitment for any expected delivery costs that occur on the purchase order.
Can any one advice how to reset commitments for expected delivery costs when no delivery cost invoices are to be expected?
Kind regards,
Roel

Hi,
If you refereed the OSS Note 427944 correctly it explains how the shipment cost can be transferred to delivery cost based on some pre-requisite.
Like the value for PO should be >0
Like the service agent is involved during shipment liability, then there should be cumulative transfer for each value which will update based on shipment cost if PO value is "0".
The shipment cost will be delivered to all delivery items based on weight.
If you want to enhance this then you need to use the enhancement V54KSFRC to update the values as per your requirement.
Rgds,

Customer expected delivery report

Hi,
I would like to be able to run a report that will give me time to ship for
an order (time order entered into system to time actually shipped) and
compare that to customer expected delivery and whether items have safety
stock or no safety stock.
Thank-you,
Venkat

Hi,
First check the fields which u want to add to the report r existing in the infoprovider on which u r building query.if its existing then u can add in the report if not u have to add in the infoprovider and need to think to which we have to map.
is this the one u want to know.
Regards,
vid.

TPSDLS idoc to be triggered only when deleting the delivery

Hi,
We have a requirement: We should be trigerring the TPSDLS idoc only when deleting the delivery in SAP. Currently, we generate the TPSDLS idoc when creating and deleting the delivery.
The Changes we tried did not help us in anyway.As we are seeing deliveries created with no-output type linked to them and when deleting them, does not provide any TPSDLS idoc.Not sure, how deliveries are created without any output type assocaited to them and what could solve them.
Any help would be appreciated.
Thanking You,
Anish Asokan

a

Error ibtsta: (1) set gpib(0), status 0X8100 returned when 0X100 expected

During install of a GPIB-ENET/100 device and the associated NI-488.2 v1.4 software and running the ibtsta utility (to check for proper software install) I recieve multiple errors the first of which is: (1) set gpib(0), status 0X8100 returned when 0X100 expected

To: Steven B.,
I am using "GPIB Getting Started with Your GPIB-ENET/100 and NI-488.2 for HP-UX", guide March 2001 Edition, P/N 322987A-01 to help me with the installation of a GPIB-ENET/100 device on a HP-UX Workstation.
Our System Information:
1. We are using HP-UX 10.2
2. We have a "E154502 24 AWG CMR (UL) VERIFIED CATAGORY 5 PATCH CABLE ALLEN TEL PRODUCTS CSA LL97744 AWM I/II A/B FT4" blue cable connected from a "LINKSYS FAST ETHERNET 10/100 5-PORT NETWORK HUB" port 1 to a "GPIB-ENET/100" device.
We also have a "HITACHI DATA MASTER CATAGORY 5e -- HCM 4PR/24 AWG (UL) TYPE CM c(UL) -- TYPE FT4 -- (UL) -- VERIFIED TO TIA/EIA -- 568 -- B.2 CAT 5e -- 5/02 (A3394) 180738" green cable connected from the network port on our "STANDARD C3600 HP-UX CONTROLLER SERVER" to the "LINKSYS FAST ETHERNET 10/100 5-PORT NETWORK HUB" port 2.
3. We have TCP/IP installed on our UNIX controller.
4. We are using NI-488.2 Version 1.4.
Also:
Upon power up the PWR/RDY LED blinks red/yellow rapidly. After approx. 30-60 seconds later the PWR/RDY LED stays constant.
According to the guide because we are not connected to the network and therefore no DHCP is available, our GPIB-ENET/100 device should automatically go into network configuration mode recognized by the PWR/RDY LED continuing to blink red/yellow rapidly. This however does not happen. We have entered network configuration mode manually by holding down the CFG RESET switch for approx. 3 seconds. After this we run the EthernetConfig utility and we get the following results:
IP ADDRESS/HOSTNAME ETHERNET ADDRESS SERIAL NUMBER MODEL COMMENT
(0) *busy* 00:80:2F:0A:30:6B
When we try to view properties of the device we get the message: No device found.
We also performed the steps per Chapter 2, page 2-1 installing the software and running the instgpib utility. We followed the instructions that appeared and everything seemed to install fine. After we were having trouble above we decided to check the software installation using the ibtsta utility per 5-1 in the "GPIB Getting Started with Your GPIB-ENET/100 and NI-488.2 for HP-UX" guide. We got several errors of which this one shown is the first:
Error: (1) set gpib(0), status 0X8100 returned when 0X100 expected. Error ENEB returned.
Also, I cannot find the UNIX instruction or variable iberr anywhere. Can you tell me how I can find out the value of iberr?
Thank you,
Abel Fernandez
Raytheon EWS

Is there an expected delivery date for the 16GB 5s iPhone in Australia?

Is there an expected delivery date for the 16GB 5s iPhone in Australia?

Kim Archbold wrote:
Is there an expected delivery date for the 16GB 5s iPhone in Australia?
The answer you seek is customarily delivered to your email inbox.

COMPUTE_FLOAT_ZERODIVIDE when display sales delivery

Hi All,
Before describing the issue will give you complete overview about the below requirement
Material X ( base UoM - PC) after certain duration becomes unusable & needs to be sold as scrap in alt
UoM MT (metric ton).
So we decided to create a dummy material let us say Y and then follow below steps:
1) Transfer the stock from 'X' to 'Y' through 309
2) Then create sales order .
3) Create the delivery and do the PGI
4) Then do the billing.
Then we had one more limitation that material 'X' weight (MT) will vary. So we decided
to activate batch management for dummy material 'Y' and go for batch specific UoM.
In standard when we add batch specifi UoM in BMA1 transaction , in the reference Unit column
we were not able to put PC , since PC is a dimensionless unit.
So we created a new dimensionless UoM, MTP (Metric ton per piece) and added this in BMA1 and
put reference unit as MT.
After this I added the configuration 'Define Calculation of Product Quantity from Base Quantity' in BMA3.
We were able to capture batch specific qty for the dummy material whenever transfer posting is done.
ISSUE:
But now the issue is that when we create sales order then delivery & PGI in single step, we are not facing any issue in
displaying the delivery document in VL03N.
While when we create delivery first & save and then do PGI and try to display the delivery document it is going
for dump
Runtime Errors COMPUTE_FLOAT_ZERODIVIDE
Exceptn CX_SY_ZERODIVIDE
For those deliveries with problem in LIPS table numerator field is updating with zero.
What could be reason for this issue? Please throw your valuable inputs.
Regards,
Partha

Runtime Errors COMPUTE_FLOAT_ZERODIVIDE
Check note 888999 or 889334
thanks
G. Lakshmipathi

I get error itms-4096 wheni try to delivery my epub on itunes store

i write from ITALY
I prepared a text with pages'09 and format it all the styles it needs to work. I tried it on book proofer and it works.
When i go to itunes producer and when i try to delivery the epub the program shows me the following message::
ERRORT ITMS-4096: "mybook.epub: the publication is expecting a multi-touch asset. You cannot upload an epub to this publication." at book.
can anyone help me, please?

Dear Steve,
in my case the problem was connected to the isbn number i used. I didn't check very well between my previous book published on itunes producer when i put that one: i used an isbn number already given to another book.
after change the isbn, everything was ok.
bye,
matteo.

Partial Delivery when the complete delivery flag is checked in Sales Order

We do the ATP check in APO when we create a sales order in R/3. We have "complete delivery" flag checked in Sales Order. But when we create batch orders say may be of 20, one of 20 is confirming with partial delivery.
We thought the issue is with ATP locking and we increased the re-attempts, but invain. We still have this partial confirming problem.
Appreciate your co-operation.
Thanks,
Sarath.

Have you maintained the following setings in R3:
Material Blocks in R3:
MenuPath: SAP Customizing Implementation Guide ® Sales and Distribution ® Basic Functions ® Availability Check and Transfer of Requirements ® Availability Check ® Availability Check with ATP Logic or Against Planning ® Define Material Block For Other Users
Global Settings in APO for Availability Check:
MenuPath: SPRO>APO>GATP>General Settings>Maintain Global Settings for Product Availabilty
Questions for you:
(1)R3--Does the Availability CHecking Group you are using for your material and the initiator-A has the block checked.
(2)APO-- Has the TQA box checked in the global settings for Availability in APO
(3)Also what happens when AVAILABILITY CHECK is done manually for one of the partial confirmed order with Complete Delivery indicator set.
Regards
Kumar Ayyagari
null

Error when Creating a delivery for an STO DEL

I have a client that at first was getting an error about shipping point can not be determined. I extended the sales view, and also created the Sales Org and division. When I created the delivery it worked. Then when the client tested this, it did not work gets the error message when trying to create the delivery in VL10B that states Document is incomplete. You can not save delivery. Then I went to the material master and checked the settings on the sales org and sales division..for whatever reason it was not there, so I repopulated the information...It worked and went all the way through. Now today...it gives me the same error message and the sales org division and everything is there. I can not create a delivery. Any information or clue would be greatly appreciated. I am testing all with the same material number, same plants, same info....

Unfortunately I did not see anything in this note that would help it appeared to be talking about IM and QM.
I do agree there is some inconsistencies and I am just not sure where....None of this makes any sense as I said one day it will work and then the next time you try it, it gives the error message....I am so at a lost at this point...

HU not coming when create inbound delivery via outbound delivery using SPED

Hi experts,
In my synario :::issue : Handling units from outbound delivery are not transferred to the automatic created inbound delivery using SPED output type.
Error when HU is assigned manually ::Handling unit 10000013565 is already assigned to outbound delivery 87005777.
Can somebody solve my probeleam or is there any sap note availavle to solve this probleam.I am using ecc 6.0 environment.
Thanks
subhasis

We have the same issue. Please post the resolution. Thanks.

Get new value for LIKP-LGTOR when creating a delivery

Hello all ,
when I creating an delivery, I use MIGO or FM BAPI_GOODSMVT_CREATE, I want to update field LIKP-LGTOR.
To do this , I have created a Z-table which contain WERKS KOSTL(KEY) and LGTOR. so , if we know WERKS & KOSTL we could find LGTOR , and update it.
The problem is that I cannot find a suitable user exit or BADI to achieve this.
In BADI LE_SHP_DELIVERY_PROC, I notice that method FILL_DELIVERY_HEADER contain LIKP-WERKS LIPS-KOSTL and we can change LIKP-LGTOR as well, but when debugging , I found that the import data LIKP LIPS are all blank.
so I want to know if there is some way we could achieve this ?
Thanks in advance for your replies!
Kevin

Hi,
Even through BADI, you will get LIKP information in CS_LIKP structure in method (FILL_DELIVERY_HEADER). But you will
not get both LIKP and LIPS information in same method. You have use FILL_DELIVERY_ITEM to get LIPS information.
Regards
Vinod

When to Expect Delivery?

Similar Messages

Maybe you are looking for