When to start support XMLType?
Hi I am using ORACLE 9i, this version supports XMLType column. Does it support XMLType column even if 8i?
I think Oracel 9i. but I want to know correct information
thanks!!
Adding further to Sateesh answer, SQL/XML is an emerging part of the ANSI and ISO SQL standard, describing the ways the Database Langauge SQL can be used in conjuction with XML. The definition of SQL/XML is driven in part by the SQLX Group. Oracle 9i Release 2 supports several SQL/XML features which are subject to change as the standard evolves.
SJH
OCP DBA
Similar Messages
-
I cannot install itunes.
I downloaded i tenes and when i started installing it , it says "installing apple application support" and stops there
What can i do ?For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2 -
when i start the browser the Mozilla Firefox' default home page not opens, other website opens nationzoom , i tried all things to change this page to default but it is not changed, following things that i have tried
1 open options then general then change start page to home page and my home page is default
2 i read a help topic on Firefox support site there is an add on which removes toolbar i tried this but start up page not changed yet
please help me about thisHello,
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information. <br>
'''Note''': ''This will cause you to lose any Extensions and some Preferences.''
*Open websites will not be saved in Firefox versions lower than 25.
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
Thank you. -
when I start my computer the safari icon jumps up and down and i get a note: 'Community Toolbar' I'm sorry, but Safari browser version you are currently using does not support the community toolbar. How do i get rid of this?
Carolyn Samit has answered this question before. I did it with this info. Thank you Carolyn for your awesome help.
-
I installed windows 7 using Boot camp, Then i wanted to install the support software using boot camp and it always stops at 50% i tried installing the software using internet it always gives me error when i start installing it on windows, What to do?
What is the error? Are you following the Bootcamp instructions? Where on the "internet" are you trying to install from? Did you try downloading from here http://www.apple.com/support/bootcamp/downloads/?
-
When will apple stop being stubborn and start supporting flesh video?
When will apple stop being stubborn and start supporting flesh video? I cannot fully use CNBC or Bloomber, for example, on IPAD. This is really not how to treat your customers
I believe Apple is all about innovation, simplicity & thinking of the box. Adobe Flash is an old technology - which over the years has not been developed or succeeded with a better offering from Adobe, leaving behind an application that is slow, buggy and a resource hog. When Apple creates technologies it thinks about future, which is the key to success. Like everyone you too should moved on. HTML 5 is the way to go.
-
IE 7 Officially released ! When would SAP start supporting IE7?
To SAP EP Team,
Now that IE7 have been officially released, when would SAP start supporting IE7?
Currently we are in EP6.0 SP 15. KM SP 15. Will there be any patches for supporting IE7? If so when would that be available?
Thanks,
DeepakFYI,
Those of you that are faced with impending support for IE7 may like to know that Microsoft has released a workaround that will allow IE7 to "run as" IE6.
The download is located under the IE7 Release Notes, under the heading: "Accessing websites that only work with Internet Explorer 6"...
Follow this link http://msdn.microsoft.com/ie/releasenotes/default.aspx
then
http://www.microsoft.com/downloads/details.aspx?FamilyID=9517db9c-3c0d-47fe-bd04-fad82a9aac9f&DisplayLang=en
Click "continue" to validate, download, and install the circumvention. The process will leave a shortcut on your desktop that (when clicked) will start IE7 in IE6 mode.
Click the "Change Settings" button and IE7 will be launched in IE6 compatibility mode for the duration of that session.
We've tested against our WebDynPro and HTMLB problems and this circumvents them all so far...
Jim -
I have Photo Stream enabled with Automatic downloads enabled. Yet when I try to join a Photo stream I get referred to The I Cloud start support page - this happens for both my Mac and my IPad. What can I do?
The following is from this Apple Document: iCloud: Photo Stream FAQ
What do I need to use Photo Stream?
To use Photo Stream, including Shared Photo Streams, you need an iCloud account, compatible devices, and up-to-date software:
iPhone, iPad, or iPod touch with iOS 6.0 or later
Mac with OS X Mountain Lion v10.8.2 or later and iPhoto 9.4 or Aperture 3.4 or later
PC with Windows 8, Windows 7, or Windows Vista (Service Pack 2) and the iCloud Control Panel 2.1 or later for Windows
Apple TV (2nd generation) with Software Update 5.1 or later
You can still use Photo Stream without Shared Photo Streams if your devices meet these requirements:
iPhone, iPad, or iPod touch with iOS 5.1 or later
Mac with OS X Lion v10.7.5 or later and iPhoto 9.2.2 or Aperture 3.2.3 or later
PC with Windows 7 or Windows Vista (Service Pack 2) and the iCloud Control Panel v2.0 or later for Windows
Apple TV (2nd generation) with Software Update 5.0 or later
For complete iCloud setup instructions, visit How to set up iCloud.
You need Mt. Lion in order to use Shared Photo Streams.
OT -
Now, I've tried all the steps on http://support.apple.com/kb/TS1440?viewlocale=en_US
When I hold down the option key, all that shows is the mouse arrow, nothing else.
When I try the disk utility idea, I'm unable to press the repair disk option, the only thing I can press is something along the lines of 'verify disk permission' which tells me that there's no package, or something like that.
I've reset the PRAM, but all that that has done is that now when i start up my computer, the startup sound actually goes off, instead of it being silent before.
I've had this computer for almost three years now, and I have a lot of important files in there, so I don't want to reinstall Mac OS X. Is there anything else I can do?How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update. -
when i start up i tunes i get the message,"The registry settings used by the i Tunes drivers for importing and burning CD's and DVD's are missing. This can happen as a result of installing other CD burning software. Please reinstall i Tunes." I tried reinstalling and still get the same message. when I ran the i Tunes diagnostics is says that the high and low filters are missing.
when i was having trouble with my optical drive(before Dell sent me a new one) the dell tech support representative had me delete some reg. files to try to fix the problem. I was told this would not affect the new drive when i install it or any of my existing programs. here is what he had me do....
Agent (CLKsmb_RyanJose_224427): "Click on Start
Click on Run
Type in REGEDIT
Click on OK
Click on the plus sign next to HKEY_LOCAL_MACHINE
Click on the plus sign next to SYSTEM
Click on the plus sign next to CurrentControlSet
Click on the plus sign next to Control"
Click on the plus sign next to Class
Click on the plus sign next to {4D36E965-E325-11CE-BFC1-08002BE10318}
On the right pane, click to highlight Upperfilters
Right click on Upperfilters
Click on Delete
Click on OK
On the right pane, click t
o highlight Lowerfilters
Right click on Lowerfilters
Click on Delete
Click on OK
Right click on Silent Install
Click on Delete
Click on OK
Close the Registry Editor
Reboot the computer
how can i get this message box to stop poping up every time i open i tunes? otherwise i tunes works fine. it still rips cd's. I just keep getting this message even after reinstalling i tines.
thanks,
chrisRefer to this article to fix:
iTunes for Windows: "Registry settings" warning when opening iTunes
http://support.apple.com/kb/TS3299 -
MacBook Pro doesnt start. When I start my lap top, it shows the apple and the line uploading but it only goes like to 1/3 and then it goes blank for some seconds, then it turns off by itself and turn on again and happen the same, apple logo, line .. the noise like-fan going on, then turn off and turn on again. Tried starting holding option command P and R key and didnt work either. Starting to think I have lost all my data inside
Try a SMC reset.
http://support.apple.com/kb/ht3964
It might be helpful if you indicated the exact model/year of your MBP. Are you running Lion OSX?
Ciao. -
Just a few days ago, I noticed that when I start Firefox it goes to a blank page, despite the fact that I have several times checked and rechecked under "Options" and my home page is in there. Also the back button has stopped working. I have made sure that inprivate browsing is not enabled, history is maintained etc etc
Does the issue still occur if you start Firefox in Safe Mode? http://support.mozilla.com/en-US/kb/Safe+Mode
How about with a new, empty profile? http://support.mozilla.com/en-US/kb/Basic%20Troubleshooting#w_8-make-a-new-profile -
When I start my computer in the morning and click on Firefox, about 50% of the time it will not open. I've waited approximatly 15 minutes and it still does not open, so it is not that it is loading slowly. Restarting my computer resolves the problem and Firefox works fine. I have Firefox set to always "run as administrator".
== This happened ==
A few times a week
== A few weeks ago ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.0; Trident/4.0; Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1) ; SLCC1; .NET CLR 2.0.50727; Media Center PC 5.0; InfoPath.1; .NET CLR 3.5.30729; .NET CLR 3.0.30729; MS-RTC LM 8; OfficeLiveConnector.1.5; OfficeLivePatch.1.3; .NET4.0C; AskTB5.6)P.S It might also be a good idea to completely remove all of your Firefox user data and settings (profiles.ini file and Profiles folder) when you [[Uninstall Firefox from your computer|remove the Firefox application from your computer]]. On OS X 10.7 or above:
#Click the Finder icon in the dock.
#On the menu bar, click the Go menu, hold down the option or alt key and select Library. A window will open containing your Library folder.
#Open the "Application Support" folder
#Delete the '''Firefox''' folder containing '''profiles.ini''' and the '''Profiles''' folder. -
I think I already disabled all the updating functions, yet, SOMETIMES when I start Firefox, (with about:blank), my network monitor shows one to five connections to IP addresses mostly in the 74.125.225.x, 74.125.227.x, 74.125.228.x, and 72.21.x.x ranges. Those ranges include Google, Amazon, and Youtube.
I use Kaspersky, and have scanned multiple times for malware, and even had their technical support look into my computer. They see no malware. It is the Kaspersky Network Monitor that revealed the problem.
As I find them happening, I try to jot down the addresses, (quickly, because some of these connections only last a second or two), then add those to a firewall rule I created to try to combat the problem. Yet, next time I start, new addresses are "attacking". Of course, some get away, because I don't get the address jotted down before it goes away. At one point I used masking that ended up keeping me from Google and Youtube, so I have to add the addresses individually, and my block list in that one rule is 13 items long now. The only IPs not in those ranges are 23.5.251.27, and 173.194.46.5. Not sure where those go.
I used to get attacked by addresses in the range that includes Amazon ... 72.21.x.x. I have a separate firewall rule for them that has 33 addresses being blocked.
I should not have to do all that. Firefox should start and just sit there quietly until I start clicking or typing in it. This has been happening in Firefox versions going back to 11. May have gone on before that, but I wasn't tracking it then.
Also, it doesn't always happen, or, more precisely, with addresses I have not already blocked, (because my only way to know it's happening is when the connections are allowed to be made). It does not always happen right after Firefox is up, but sometimes several minutes later. I have started Firefox and just sat and watched the network monitor without doing anything in Firefox, and have seen this happen up to 15 minutes after I start Firefox ... mostly just two or three minutes when there's a delay at all.Firefox does not do anything but sit on about:blank after I start it as long as I have a firewall rule enabled that completely blocks these subnets:
74.125.222.0/24
74.125.227.0/24
74.125.228.0/24
173.194.46.0/24
173.194.115.0/24
173.194.121.0/24
64.233.171.0/24
54.230.90.0/24
54.230.88.0/24
72.21.194.0/24
72.21.195.0/24
72.21.215.0/24
207.171.163.0/24
Otherwise, Fire fox creates connections to one to five addresses in those ranges. Note that there are more than 5 subnets above, but usually three connections satisfies whatever purpose these connections are being made for. If I had some links or whatever that is causing these connections, I would expect all of them would come up every time.
Also, these connections do not start immediately upon starting Firefox, they wait up to 15 minutes to start ... fifteen minutes of just sitting idle ... no actions on my part that could possibly initiate them. Usually these start within three minutes. A typical ploy of malware is to wait until no one is looking, or the until there's a forest to put their tree in so it won't be noticed.
While the above rules are in place, I do not have access to Amazon, Youtube, or Google, (or any of the various blog sites and services sponsored by Google, including Google Maps and Gmail). That list may not be complete, as I have other firewall rules in place that mainly block individual addresses.
It seems to me as simple as; figure out who owns those subnets, and you have your bad guys. Then go after them.
It's true that I have a bookmarks to Google, Gmail, and Youtube, but these are not "active" bookmarks nor RSS feeds. I have not voluntarily gone to Amazon on this computer.
The traffic being transmitted is unknown. It is usually not extremely large amounts of data ... less than a meg, but I have seen close to a Gig transmitted out of my computer, and over 400 meg transmitted to my computer, when I was not paying attention to block the offender. Even if it's small amounts, things like cookies, path structures, configuration settings, histories, etc. do not involve a lot of data, but, to me, represent a security breach, if someone decides to look at them unsolicited by me, not unlike your landlord, mortgage holder, or neighborhood police officer walking into your home while you're not there, and taking pictures of, or simply inventorying your belongings.
It is VERY much like some sort of backdoor malware. No malware is detected on my computer.
I looked at the suggestion above for OS changes for logging HTTP activity, but the author neglected to include instructions for backing out these changes after using them. If this were to create more jewels in a drawer the thief has access to, reformatting and restoring my drive is not the kind of back out process I enjoy. Therefore it would be foolish to apply them. To me it would be like bungee diving with no bungee. Fun until you hit the bottom. Give me the bungee, let me make sure it's short enough, then I'll dive. -
Dear Mr./Mrs.,
I had an iPhone 4 , then I bought iPhone 5s , I faced a problem when I started installing any new application other than I already had on my iCloud , I was asked to enter my password of my apple account and I entered it correctly , then I was asked to answer two questions , but I forgot the answers !! I click on forgot the answers , they send me check your email , I check my email and they send me the password that I have already entered not the answers of the questions ! How can this problem be solved ?! Hope to take my message into consideration.
Yours sincerely,
Hesham.Welcome to the user to User Technical Support Forum provided by Apple.
For your issue...
See Here > Apple ID: Contacting Apple for help with Apple ID account security
Ask to speak with the Account Security Team...
Or Email Here > Apple Support iTunes Store Contact
Maybe you are looking for
-
Hi, in transaction ME21N (or ME22N & ME23N), i created some notes with Generic Object Service. Now, in ABAP i would like to get back items of this list. Can you send me an ABAP example ? Thanks for your help. Cheers.
-
Sessions with internetexplorer and opera browser are different
im new to java technology, i have a doubt regarding sessions... i have used InternetExplorer and logged in using two browsers with two different user names . when i logged out of yahoo in one browser the second browsers session is also expired......
-
TS2537 mail doesn't open from dock on my iMac; I have to go through Yahoo to get mail
Mail doesn't open from dock on my iMac, even though top left of screen indicates mail is open
-
Manually open iphone sync in itunes... HOW??
I have turned off the "auto-sync" option in iTunes, so that every time I plug in my iphone, it won't automatically sync, and it will allow me to sync manually at my discretion. When auto-sync is turned ON, iTunes starts automatically when the phone i
-
Hi all i would like to know the following. 1. T-code to create payment remittance advice. 2.T-code to change paymen remittnce advice. 3. What is the procedure to see print preview of payment remittance advice. thanks & regards GP