When to use BPM Standalone and BPM on Weblogic Server?

Hi,
How are you?
We are starting a project that involves BEA BPM, I have a question regarding which installation flavor should we go for, what is the difference between how BPM works when using Weblogic or Stand alone, what advantages are given when installing it over weblogic vs installing the Standalone version?
Thanx in Advanced!
Kind Regards,
Gerardo J

Hi Gerardo:
There are a lot of considerations about your question. The main difference is clearly the Aplication Server, while a Standalone version have an imbebbed TOMCAT 5.5 , the WL version requires at least Weblogic Server 8.2.
First, there is an important question that you must answer:
Your organization architectonical deployment supports Weblogic products? (weblogic, service bus, tuxedo, etc.)
Do you have a service bus? Does your organization / project this requirement?
Has your organization TOMCAT experience /support?
How many concurrent users your solution intends to support?
Is there experience about BPM's development?
Try to solve this initial questions. The decision isn't about the product, is about how do you plan to solve your organization business and IT needs.
Best regards,
Carlos
Translated
Hola Gerardo:
Hay un grupo de consideraciones sobre tu pregunta. La principal diferencia entre las versiones corresponde al uso del servidor de aplicaciones; mientras la version SA utiliza un Tomcat 5.5 embebido, la versión WL utiliza versiones superiores a la 8.2
Para resolver tu duda, debes al menos responderte estas preguntas:
¿Mi arquitectura empresarial de aplicaciones se integra a soluciones de weblogic?
¿Tienes un bus de servicios empresariales?
¿Tiene la organizacion experiencia en desarrollos de Tomcat?
¿Cuantos usuarios concurrentes utilizarán el sistema?
¿Hay experiencia en el equipo con la metodología de desarrollo para BPM?
Trata de resolver esto inicialmente. La decisión del producto no es por el producto en sí, sino que en realidad al producto que mejor se integre a la realidad que presente tu empresa, al solucionar el problema de negocio, de forma sustentable con tu estructura de TI.
Saludos y suerte,
Carlos.

Similar Messages

Difference between Enterprise Standalone and Enterprise on Weblogic Server

Hi,
If I test my process on Standalone Enterprise Server and then test the same process on Enterprise Server on Weblogic (WLS), will there be any difference in my testing.. Will I receive different results or the results would be the same?

Hi,
In Studio,in project preferences in General you have a check box that says something like Development for J2EE,that you should check if you are going to deploy to WLS or WAS. But there is no reason why something develop for StandAlone is not going to work in J2EE.
HTH

When to use the Adapters and in which case

Hi Experts,
I am little worried and searched the sdn, but i am not getting the proper answer for my question.
My Question is when to use which adapter and at what stage?
1. File --> when to use it and in which case
2. IDOC
3. RFC
4. SOAP
5. XI
6. HTTP
And also where to use BPM and Proxies, when should we go for them.
Please help me out. I Beg the answer from experts.
Regards,
Raj

Hi,
If an incoming or outgoing message is a file(.txt,.csv etc), we use a file adapter
If the outgoing message is an IDOC, we need an IDOC adapter.same for RFC also.
SOAP for incoming/outgoing webservices
XI while using proxy scenarios
HTTP- while you an HTTP request.
BPM and Proxies is a vast topic.
For Proxies http://help.sap.com/saphelp_nw04/helpdata/en/5d/112d20f6ce6c46ba66afb98d278fbd/frameset.htm
and for BPM http://help.sap.com/saphelp_nw04/helpdata/en/5d/112d20f6ce6c46ba66afb98d278fbd/frameset.htm
this will be useful.
Regards,
Tiny

When I use yahoo images and i open an image in a new window, it tweakes out firefox so that panes are distorted and exerything, the whole firefox browser looks like an F5 tornado took it apart and lumped it on my desktop... is this a known glitch?

When I use yahoo images and open an image in a new window, the page, once I click its tab causes the entire browser to scramble graphically, making it nearly impossible to navigate further. I right-clicked and selected close tab. That regains the visual clarity of the browser. But how can I fix this to browse the images?

Phillipp,
I tried it again using "save link as", and this time it actually worked! I just now downloaded several more using the "save link as" option, and it works perfectly. Thanks. Problem solved.
Littleberry

I hit Forget Network and now cannot get back onto my wireless home network. All of my other computers and iphones are fine. How do I get the network back? It shows in my list of networks but when I use the password and try to join it says not connected.

I hit Forget Network and now cannot get back onto my wireless home network. All of my other computers and iphones are fine. How do I get the network back? It shows in my list of networks but when I use the password and try to join it says not connected.

See if the iPad will accept the password after you restart it. It's worth a try.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
You could also try a reset as well.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

When to use Apps adapter and DB adapter?

Hi All,
For invoking a PL/SQL API(either a custom or System API) in Oracle Applications from BPEL Process which is better to use?When to use Apps adapter and DB adapter?
Thanks,
ChitraDevi

As Sen correctly states for the DB adapter you have to set the context manually using the fun_global.apps_initilize or Fnd_Client_Info.SET_ORG_CONTEXT. This is usually done in a wrapper procedure.
I wouldn't say I'm an expert in this field as I have only used the APPS adapter for 11.5.10. I believe things have changed a bit for R12, but from my experience with APPS, things change very slow so although R12 is 10g App Server I'm sure the principles are the same.
Sen is also correct saying that base tables are not accessible via the APPS adapter. Basically the apps adapter is there to expose services, base tables are not services.
My recommendation would be different based on the experience of the developer(s). The APPS adapter simplifies the development but may not have the flexibility. The apps adapters sweet spot is those services that are difficult to integrate with, e.g. business services, xml gateway. If these are used heavily I would use the APPS adapter.
What I personally do, even if I'm not using APPS, if I'm connecting to the database I will implement a function, stored procedure, or AQ. It is a little more hassle during deployment, but it treats it more like a service and you are not impacted if the tables change. This is not an endorsement for you to go down this path because it does have a requirement to have PL/SQL knowledge, and it breaks the notion of service abstraction from the DB.
cheers
James

Hi when i use treeMap class and if i exit the program

hi
hi when i use treeMap class and if i exit the program,
what will happen? the information that i put in the treeMap will be disappear??
if it is like that,,how am i able to retrieve my data...when i restart my program..
once i put ID as key and put my customer information,
in it, after exit my program,, and i can't find
my customers by their ID,,,,,,,,,how can,,i solve it......

what will happen? the information that i put in the
treeMap will be disappear??Yes. Of course. If you want data to hang around you have to tell the computer. If you want anything to happen you have to tell the computer.
if it is like that,,how am i able to retrieve my
data...when i restart my program..Tada! Tell the computer. Your simplest option is to use Serialization.
Before exiting your program, serialize your TreeMap to disk. After starting your program serialize your TreeMap from disk.
First stop should be your text book to learn what Serialization is and how it works, then try to write some code, then ask us to help with any problems.
Dave.

I want to use PCK standalone and do one scenario of mail to file ?

hi all
Is it possible to use PCK standalone and do scenario of mail to file by using PCK mail and file adapters .if yes reply me
thanks

i didn't get you sir ...can please clarify me . i had done the same scenario using XI but in PCK is it the same? because in PCK it requires Default Interface Name and Namespace which must exists in XI and we can't even create our own interface in PCK .so howz it possible without XI.
please reply me
Message was edited by:
Ashwin Kumar Dhakne

When we using overflow-x and overflow-y in tbody its not working properly. In the previous version i.e. 3.7.1 its working fine the same coding....Please help me.

''Duplicate post, continue here - [https://support.mozilla.com/en-US/questions/828024]''
when we using overflow-x and overflow-y in tbody its not working properly. In the previous version i.e. 3.7.1 its working fine the same coding....Please help me.

See:
*https://developer.mozilla.org/en/Firefox_4_for_developers#Miscellaneous_DOM_changes
*http://www.cssplay.co.uk/menu/tablescroll.html
A good place to ask questions and advice about web development is at the mozillaZine Web Development/Standards Evangelism forum.<br />
The helpers at that forum are more knowledgeable about web development issues.<br />
You need to register at the mozillaZine forum site in order to post at that forum.<br />
See http://forums.mozillazine.org/viewforum.php?f=25

Firefox does not open with the tabs I had open when I use the quit and save function. Firefox opens with my home page only. how to fix?

When I use the "Save and Quit" function it has no effect. The next time I open Firefox it goes to my home page only.
== This happened ==
Every time Firefox opened
== 3 days ago

This is not a solution, nor a work-around. The only thing this points out is where the problem lies. Settings are meant to be used in all sessions, barring exceptions and the fact that Firefox asks if you'd rather SAVE and then quit, makes it an exception. The user has elected to skip the clear browsing history step.
However, if the settings are permanently changed as you suggest, then the history will always be remembered for eternity when Firefox is closed. You then have to manually clear your history first at every session before closing.
Older versions of Firefox never behaved in such manner and recognized that the Save and Quit superseded the setting to Clear History.

TS3274 A rectangular or sqaure bubble appears when I use my ipad and I always have to tap it twice. Also when I tried to go to setting to restart it, it wont go down or up. What do I do?

A rectangular or sqaure bubble appears when I use my ipad and I always have to tap it twice. Also when I tried to go to setting to restart it, it wont go down or up. What do I do?

try pressing the home button 3 times.

When we use calculation script and when we use business rule

when we use calculation script and when we use business rule can anyone please tell me

Re the OP's question, here is an excellent introduction to Calculation Manager and business rules. It was the first hit when I googled "calculation manager hyperion".
http://ranzal.wordpress.com/2010/06/11/oracle-hyperion-calc-manager-%E2%80%93-part-1/
You can also go to odtug.com -- the Tech Resources section has a series of presentations on Calculation Manager, from beginner to intermediate.
The added benefit with business rules are that you can use variables and runtime prompts. You can also link planning with business rules and pass information from a web form into a business rules.^^^Only with Planning. There are no runtime prompts with Essbase in 11.1.2.2 but I hear it is coming back in 11.1.2.3
We can use Business Rule for all applications and it is GUI.^^^Doesn't have to be GUI-based. You can (depending on version) flip back and forth between GUI and script. I have not tried writing (nor can I actually think why you would want to do this) a Calc Mgr rule for multiple apps. Maybe you are thinking of a script object that can be called multiple times?
To check whether a calc script is executed or not you have to use the Essbase application database log file (Plan1.LOG)^^^As business rules are, sooner or later, translated to BSO (and hey, ASO too and HFM and Fusion and HPCM and they can differ, a lot, so this is not always true) calc script language, you can always check in the application log to see what is run if Planning or BSO Essbase.
Regards,
Cameron Lackpour

When I use my iPhone and go into the iTunes Store Search, it clocks/gets-stuck in Loading. Also if I select iTunes and App Store in Settings, nothing happens. Any advice? Thanks.

When I use my iPhone and go into the iTunes Store Search, it clocks/gets-stuck in Loading.
Also if I select iTunes and App Store in Settings, nothing happens.
Any advice?
Thanks.

I guess no advice. Thanks anyway.

Safari is stop and reopen suddenly, when I use double tap and input data on safari. Do you give me a solution?

Safari is stop and reopen suddenly, when I use double tap and input data on safari. Do you give me a solution?

Tap Settings > General > Reset > Reset All Settings
Then restart the device.
message edited by: cs

Error when using Project Gantt Chart in Production Weblogic Server 10.3.5

Dear All,
I have an application utilizing <dvt:projectGantt> Project Gantt Chart. I have tested it in intergrated weblogic server and it is working correctly but when I deploy it in Production Weblogic server, error occurred with NullPointerException on the ViewObjImpl -- class not found exception. I have look into each library used in the ADF runtime on the production server, all the library used are installed and deploy to each server target.
Below is the log:
[2012-07-31T15:16:53.004+08:00] [ifms_server1] [WARNING] [] [oracle.adf.controller.faces.lifecycle.Utils] [host: ifmsbi01] [nwaddr: 10.23.60.85] [tid: [ACTIVE].ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 74ddce286346267c:-69fcf19:138d71e59c7:-8000-00000000000026ca,0] [APP: IFMSGanttChart] ADF: Adding the following JSF error message: oracle/jbo/server/ViewObjectImpl[[
java.lang.NoClassDefFoundError: oracle/jbo/server/ViewObjectImpl
     at oracle.jbo.server.ViewDefImpl.getBaseComponentClass(ViewDefImpl.java:2472)
     at oracle.jbo.server.RemotableCompDef.loadFromXML(RemotableCompDef.java:145)
     at oracle.jbo.server.ViewDefImpl.loadFromXML(ViewDefImpl.java:3996)
     at oracle.jbo.server.ViewDefImpl.loadFromXML(ViewDefImpl.java:3789)
     at oracle.jbo.server.ViewDefImpl.loadFromXML(ViewDefImpl.java:3737)
     at oracle.jbo.server.MetaObjectManager.loadFromXML(MetaObjectManager.java:552)
     at oracle.jbo.mom.DefinitionManager.loadLazyDefinitionObject(DefinitionManager.java:1133)
     at oracle.jbo.mom.DefinitionManager.findDefinitionObject(DefinitionManager.java:592)
I really am in need of assistance on these matter. I have read several article on the web about clearing cache on weblogic server, bundling the required ADF library with application and not mixing JDeveloper version with Weblogic server version, but it still not working in production weblogic.
Best Regards
Faizul
Edited by: 951976 on Aug 10, 2012 12:15 AM

Dear Arun,
The WLS server is the same for (integrated WLS and Production) . For JRF template I'm sure it is the same. I have deploy another application that used BC, and it work fine in production.
Regards
Faizul

How to use Digital Signature and PKI in SharePoint Server 2013

Dear Expert,
My company will plan to use Digital Signature and PKI document in SharEPoint Server 2013.
Can you guide me what's the concept and how to implement and develop?
Please suggestion.
BR,

Hi BR,
Based on your description, my understanding is that you want to use Digital Signature and PKI in SharePoint Server 2013.
You can use digital signatures in forms ,then use these forms in you SharePoint site.
In InfoPath form ,you can change the form to allow signature here: File>Info>Advanced form options >Digital Signatures .You can choose to sign the whole form or a field .
https://social.technet.microsoft.com/Forums/en-US/0ed54d57-d67d-41cd-bd1b-9e5a4be10d0c/use-of-digital-signature-in-sharepoint-2010?forum=sharepointcustomizationprevious
Or you can use any tools such as the ADSS Connector for SharePoint which allows enterprise users to "click and sign" on a document in SharePoint.
http://www.ascertia.com/
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

When to use BPM Standalone and BPM on Weblogic Server?

Similar Messages

Maybe you are looking for