When trying to access excel retrive,error is pop-up(Urgent)

Hi All,
when trying to access excel retrive,the below error is occured.
"An unkown error has occurred in the HsvExcelUI object"
Please let me know, why it happend.
Thanks you.

Hello,
I think ur Smartview is crashed. Please ask ur system engineer or whoever taking care of installation of smartview to check the smartview connection.
Generally u will get the pop up message if smartview crashes.
If anyone have other opinion than this please post here so that i can know.
Thanks..............

Similar Messages

  • HT4623 when trying to restore my iphone error 2001 pops up. Will not get out of recovery mode

    Battery got extremely hot one day while battery was 100%. When i noticed it was hot battery started draining really fast within 5 min it was dead. Hooked up to computer to charge but would not turn on. Itunes plug in screen pops up and iunes says needs to be restored, but when i try to restore it error 2001 keeps popping up. That was on a mac book, when trying to restore on pc error 21 pops up. Any ideas?

    Maybe:
    Restore loop (being prompted to restore again after a restore successfully completes)
    Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
    Next try placing in DFU mode and then restoring.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    Then try restoring on another computer.
    Last, make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • When trying to open facetime an error message pops up that says "facetime cannot be opened because of a problem". I have all my software up to date.

    I tried to delete then reinstall but it wont let me delete it because it says i can't delete it because it's required by os x.

    I tried to delete then reinstall but it wont let me delete it because it says i can't delete it because it's required by os x.

  • Error message "The specified user or domain group was not found" when trying to access certain sites

    Hello.
    My setup is as such (this is a testing environment), spread over two virtual machines:
    -Windows Server 2012 with AD DS and MS SQL Server 2012
    -SharePoint Server 2013
    When trying to access a lot of site collections in different web applications, I am given this error message. The error message started suddenly appearing, and I do not know what caused it. It started happening after I turned on Request Management Service
    Application, though I can't see how that would cause this, and it was not fixed after I turned it off.
    I have the necessary permissions, as I have been able to log on to the sites before without any issue. I am using a domain administrator account who is a site collection administrator.
    At first I thought it was an issue related to User Profile Service Application, as I was having issues starting the Synchronisation instance. I deleted and re-installed UPS, got synchronisation to work, and it still does not work. I have made no changed
    to the AD schema. I have not moved any accounts recently, and I have not deleted any accounts.
    Here are the ULS log entries. It seems to have been truncated some.
    06/11/2014 10:17:31.94 w3wp.exe (0x1904) 0x0FAC SharePoint Foundation Authentication Authorization agb9s Medium Non-OAuth request. IsAuthenticated=True, UserIdentityName=0#.w|sp\administrator, ClaimsCount=26 dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
    06/11/2014 10:17:32.02 w3wp.exe (0x1904) 0x0FAC SharePoint Foundation Database ahjqp High [Forced due to logging gap, cached @ 06/11/2014 10:17:31.95, Original Level: Verbose] SQL connection time: 0.0556 dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
    06/11/2014 10:17:32.02 w3wp.exe (0x1904) 0x0FAC SharePoint Foundation Files 00000 High UserAgent not available, file operations may not be optimized. at Microsoft.SharePoint.SPFileStreamManager.CreateCobaltStreamContainer(SPFileStreamStore spfs, ILockBytes ilb, Boolean copyOnFirstWrite, Boolean disposeIlb) at Microsoft.SharePoint.SPFileStreamManager.SetInputLockBytes(SPFileInfo& fileInfo, SqlSession session, PrefetchResult prefetchResult) at Microsoft.SharePoint.CoordinatedStreamBuffer.SPCoordinatedStreamBufferFactory.CreateFromDocumentRowset(Guid databaseId, SqlSession session, SPFileStreamManager spfstm, Object[] metadataRow, SPRowset contentRowset, SPDocumentBindRequest& dbreq, SPDocumentBindResults& dbres) at Microsoft.SharePoint.SPSqlClient.GetDocumentContentRow(Int32 rowOrd, Object ospFileStmMgr, SPDocumentBindRequest& dbreq, SPDocumentBindResults& dbres... dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
    06/11/2014 10:17:32.02* w3wp.exe (0x1904) 0x0FAC SharePoint Foundation Files 00000 High ...) at Microsoft.SharePoint.Library.SPRequestInternalClass.GetFileAndMetaInfo(String bstrUrl, Byte bPageView, Byte bPageMode, Byte bGetBuildDependencySet, String bstrCurrentFolderUrl, Int32 iRequestVersion, Byte bMainFileRequest, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean& pbGhostedDocument, Boolean& pbDefaultToPersonal, Boolean& pbIsWebWelcomePage, String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion, String& pbstrTimeLastModified, String& pbstrContent, UInt32& pdwPartCount, Object& pvarMetaData, Object& pvarMultipleMeetingDoclibRootFolders, String& pbstrRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId, UInt32& pdwItemId, Int64& pllListFlags, Boolean& pbAccessDenied, Guid& pgDocid, Byte& piLevel, UInt64& ppermMask, ... dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
    06/11/2014 10:17:32.02* w3wp.exe (0x1904) 0x0FAC SharePoint Foundation Files 00000 High ...Object& pvarBuildDependencySet, UInt32& pdwNumBuildDependencies, Object& pvarBuildDependencies, String& pbstrFolderUrl, String& pbstrContentTypeOrder, Guid& pgDocScopeId) at Microsoft.SharePoint.Library.SPRequestInternalClass.GetFileAndMetaInfo(String bstrUrl, Byte bPageView, Byte bPageMode, Byte bGetBuildDependencySet, String bstrCurrentFolderUrl, Int32 iRequestVersion, Byte bMainFileRequest, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean& pbGhostedDocument, Boolean& pbDefaultToPersonal, Boolean& pbIsWebWelcomePage, String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion, String& pbstrTimeLastModified, String& pbstrContent, UInt32& pdwPartCount, Object& pvarMetaData, Object& pvarMultipleMeetingDoclibRootFolders, String& pbst... dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
    06/11/2014 10:17:32.02* w3wp.exe (0x1904) 0x0FAC SharePoint Foundation Files 00000 High ...rRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId, UInt32& pdwItemId, Int64& pllListFlags, Boolean& pbAccessDenied, Guid& pgDocid, Byte& piLevel, UInt64& ppermMask, Object& pvarBuildDependencySet, UInt32& pdwNumBuildDependencies, Object& pvarBuildDependencies, String& pbstrFolderUrl, String& pbstrContentTypeOrder, Guid& pgDocScopeId) at Microsoft.SharePoint.Library.SPRequest.GetFileAndMetaInfo(String bstrUrl, Byte bPageView, Byte bPageMode, Byte bGetBuildDependencySet, String bstrCurrentFolderUrl, Int32 iRequestVersion, Byte bMainFileRequest, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean& pbGhostedDocument, Boolean& pbDefaultToPersonal, Boolean& pbIsWebWelcomePage, String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion,... dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
    06/11/2014 10:17:32.02* w3wp.exe (0x1904) 0x0FAC SharePoint Foundation Files 00000 High ... String& pbstrTimeLastModified, String& pbstrContent, UInt32& pdwPartCount, Object& pvarMetaData, Object& pvarMultipleMeetingDoclibRootFolders, String& pbstrRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId, UInt32& pdwItemId, Int64& pllListFlags, Boolean& pbAccessDenied, Guid& pgDocid, Byte& piLevel, UInt64& ppermMask, Object& pvarBuildDependencySet, UInt32& pdwNumBuildDependencies, Object& pvarBuildDependencies, String& pbstrFolderUrl, String& pbstrContentTypeOrder, Guid& pgDocScopeId) at Microsoft.SharePoint.SPWeb.GetWebPartPageContent(Uri pageUrl, Int32 pageVersion, PageView requestedView, HttpContext context, Boolean forRender, Boolean includeHidden, Boolean mainFileRequest, Boolean fetchDependencyInformation, Boolean& ghostedPage, String& siteRoot, Guid& siteId, Int64& bytes, ... dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
    06/11/2014 10:17:32.02* w3wp.exe (0x1904) 0x0FAC SharePoint Foundation Files 00000 High ...Guid& docId, UInt32& docVersion, String& timeLastModified, Byte& level, Object& buildDependencySetData, UInt32& dependencyCount, Object& buildDependencies, SPWebPartCollectionInitialState& initialState, Object& oMultipleMeetingDoclibRootFolders, String& redirectUrl, Boolean& ObjectIsList, Guid& listId) at Microsoft.SharePoint.ApplicationRuntime.SPRequestModuleData.FetchWebPartPageInformationForInit(HttpContext context, SPWeb spweb, Boolean mainFileRequest, String path, Boolean impersonate, Boolean& isAppWeb, Boolean& fGhostedPage, Guid& docId, UInt32& docVersion, String& timeLastModified, SPFileLevel& spLevel, String& masterPageUrl, String& customMasterPageUrl, String& webUrl, String& siteUrl, Guid& siteId, Object& buildDependencySetData, SPWebPartCollectionInitialState& initialState, ... dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
    06/11/2014 10:17:32.02* w3wp.exe (0x1904) 0x0FAC SharePoint Foundation Files 00000 High ...String& siteRoot, String& redirectUrl, Object& oMultipleMeetingDoclibRootFolders, Boolean& objectIsList, Guid& listId, Int64& bytes) at Microsoft.SharePoint.ApplicationRuntime.SPRequestModuleData.GetFileForRequest(HttpContext context, SPWeb web, Boolean exclusion, String virtualPath) at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.InitContextWeb(HttpContext context, SPWeb web) at Microsoft.SharePoint.WebControls.SPControl.SPWebEnsureSPControl(HttpContext context) at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.GetContextWeb(HttpContext context) at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.PostResolveRequestCacheHandler(Object oSender, EventArgs ea) at System.Web.HttpApplication.SyncEventExecutionStep.System.Web.HttpApplication.IEx... dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
    06/11/2014 10:17:32.02* w3wp.exe (0x1904) 0x0FAC SharePoint Foundation Files 00000 High ...ecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) at System.Web.HttpApplication.PipelineStepManager.ResumeSteps(Exception error) at System.Web.HttpApplication.BeginProcessRequestNotification(HttpContext context, AsyncCallback cb) at System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context) at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) at System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompl... dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
    06/11/2014 10:17:32.02* w3wp.exe (0x1904) 0x0FAC SharePoint Foundation Files 00000 High ...etion(IntPtr pHandler, RequestNotificationStatus& notificationStatus) at System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompletion(IntPtr pHandler, RequestNotificationStatus& notificationStatus) at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
    06/11/2014 10:17:32.02 w3wp.exe (0x1904) 0x0FAC SharePoint Foundation Files aiv4w Medium Spent 0 ms to bind 3356 byte file stream dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
    06/11/2014 10:17:32.02 w3wp.exe (0x1904) 0x0FAC SharePoint Foundation Logging Correlation Data xmnv Medium Site=/ dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
    06/11/2014 10:17:32.02 w3wp.exe (0x1904) 0x0FAC SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (PostResolveRequestCacheHandler). Execution Time=66.6457 dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
    06/11/2014 10:17:32.02 w3wp.exe (0x1904) 0x1BC0 SharePoint Portal Server User Profiles ajk4d Medium UserProfileProperty_WCFLogging::Begin ProfilePropertyServiceClient.ExecuteOnChannel acc2999c-dfbc-a0b4-a4e8-f962e574ee66
    06/11/2014 10:17:32.02 w3wp.exe (0x1904) 0x1BC0 SharePoint Portal Server User Profiles ajk35 Medium MossClientBase_WCFLogging::Begin MossClientBase.ExecuteOnChannel acc2999c-dfbc-a0b4-a4e8-f962e574ee66
    06/11/2014 10:17:32.02 w3wp.exe (0x1904) 0x1BC0 SharePoint Portal Server User Profiles ajk36 Medium MossClientBase_WCFLogging:: MossClientBase.ExecuteOnChannel - Executing codeblock on channel acc2999c-dfbc-a0b4-a4e8-f962e574ee66
    06/11/2014 10:17:32.02 w3wp.exe (0x1904) 0x1BC0 SharePoint Foundation Topology e5mc Medium WcfSendRequest: RemoteAddress: 'http://sp13:32843/44fa09d6891d4d7bb9856a0da10f6a84/ProfilePropertyService.svc' Channel: 'Microsoft.Office.Server.UserProfiles.IProfilePropertyService' Action: 'http://Microsoft.Office.Server.UserProfiles/GetProfileProperties' MessageId: 'urn:uuid:ec3c0f34-3285-4771-a7a1-24039cb4ced8' acc2999c-dfbc-a0b4-a4e8-f962e574ee66
    06/11/2014 10:17:32.03 w3wp.exe (0x1904) 0x0FAC Web Content Management Publishing 7fz3 Medium Setting [Display] as the FormContext.FormMode for the current page dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
    06/11/2014 10:17:32.03 w3wp.exe (0x1904) 0x0FAC SharePoint Foundation General 8sl1 High DelegateControl: Exception thrown while adding control 'Microsoft.SharePoint.Publishing.Navigation.PortalSiteMapDataSource': Microsoft.SharePoint.SPException: The specified user or domain group was not found. ---> System.Security.Principal.IdentityNotMappedException: Some or all identity references could not be translated. at System.Security.Principal.NTAccount.Translate(IdentityReferenceCollection sourceAccounts, Type targetType, Boolean forceSuccess) at System.Security.Principal.NTAccount.Translate(Type targetType) at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKeyClaim(IClaimsIdentity claimsIdentity, SPClaim loginClaim) --- End of inner exception stack trace --- at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.... dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
    06/11/2014 10:17:32.03* w3wp.exe (0x1904) 0x0FAC SharePoint Foundation General 8sl1 High ...GetProviderUserKeyClaim(IClaimsIdentity claimsIdentity, SPClaim loginClaim) at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKey(IClaimsIdentity claimsIdentity, String encodedIdentityClaimSuffix) at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKey(String encodedIdentityClaimSuffix) at Microsoft.SharePoint.Utilities.SPUtility.GetFullUserKeyFromFullName(String fullName) at Microsoft.SharePoint.SPGlobal.CreateSPRequestAndSetIdentity(SPSite site, String name, Boolean bNotGlobalAdminCode, String strUrl, Boolean bNotAddToContext, Byte[] UserToken, SPAppPrincipalToken appPrincipalToken, String userName, Boolean bIgnoreTokenTimeout, Boolean bAsAnonymous) at Microsoft.SharePoint.SPSite.get_Request() at Mi... dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
    06/11/2014 10:17:32.03* w3wp.exe (0x1904) 0x0FAC SharePoint Foundation General 8sl1 High ...crosoft.SharePoint.SPSite.OpenWeb(Guid gWebId, Int32 mondoHint) at Microsoft.SharePoint.Publishing.CachedObjectFactory.OpenWebFromSuperUserSite(Guid webId) at Microsoft.SharePoint.Publishing.CacheManager..ctor(SPSite site) at Microsoft.SharePoint.Publishing.CacheManager.GetManager(SPSite site, Boolean useContextSite, Boolean allowContextSiteOptimization, Boolean refreshIfNoContext) at Microsoft.SharePoint.Publishing.CachedAreaLookup.EnsureLookup(Boolean errorsAsExceptions) at Microsoft.SharePoint.Publishing.CachedAreaLookup.GetCachedAreaOrException() at Microsoft.SharePoint.Publishing.Navigation.TaxonomyNavigationCache.GetCachedWebInfo(CachedAreaLookup cachedAreaLookup) at Microsoft.SharePoint.Publishing.Navigation.TaxonomyNavigationCache.GetWebNavigationSetting... dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
    06/11/2014 10:17:32.03* w3wp.exe (0x1904) 0x0FAC SharePoint Foundation General 8sl1 High ...s(CachedAreaLookup cachedArea, CachedAreaLookup& parentCachedArea, Exception& loadError) at Microsoft.SharePoint.Publishing.Navigation.TaxonomyNavigation.GetEffectiveProviderSettingsList(CachedAreaLookup cachedArea, Boolean includeInheritedSettings) at Microsoft.SharePoint.Publishing.Navigation.TaxonomyNavigation.GetEffectiveProviderSettings[T](CachedAreaLookup cachedArea, String siteMapProviderName, Boolean includeInheritedSettings, CachedAreaLookup& cachedAreaWithSettings) at Microsoft.SharePoint.Publishing.Navigation.TaxonomyNavigation.GetEffectiveProviderSettings[T](SPWeb web, String siteMapProviderName, Boolean includeInheritedSettings) at Microsoft.SharePoint.Publishing.Navigation.SwitchableSiteMapProvider.GetCurrentWrappedProvider() at Microsoft.SharePoint.Publis... dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
    06/11/2014 10:17:32.03* w3wp.exe (0x1904) 0x0FAC SharePoint Foundation General 8sl1 High ...hing.Navigation.SwitchableSiteMapProvider.get_RootNode() at Microsoft.SharePoint.Publishing.Navigation.SwitchableDataSourceBehavior.AssignProperties(SiteMapProvider targetProvider) at Microsoft.SharePoint.Publishing.Navigation.PortalSiteMapDataSource.OnInit(EventArgs e) at System.Web.UI.Control.InitRecursive(Control namingContainer) at System.Web.UI.Control.AddedControl(Control control, Int32 index) at Microsoft.SharePoint.WebControls.DelegateControl.AddControlResilient(Control ctl) dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
    06/11/2014 10:17:32.03 w3wp.exe (0x1904) 0x0FAC SharePoint Foundation General 8sl1 High DelegateControl: Exception thrown while adding control 'Microsoft.SharePoint.Publishing.Navigation.PortalSiteMapDataSource': Microsoft.SharePoint.SPException: The specified user or domain group was not found. ---> System.Security.Principal.IdentityNotMappedException: Some or all identity references could not be translated. at System.Security.Principal.NTAccount.Translate(IdentityReferenceCollection sourceAccounts, Type targetType, Boolean forceSuccess) at System.Security.Principal.NTAccount.Translate(Type targetType) at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKeyClaim(IClaimsIdentity claimsIdentity, SPClaim loginClaim) --- End of inner exception stack trace --- at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.... dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
    06/11/2014 10:17:32.03* w3wp.exe (0x1904) 0x0FAC SharePoint Foundation General 8sl1 High ...GetProviderUserKeyClaim(IClaimsIdentity claimsIdentity, SPClaim loginClaim) at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKey(IClaimsIdentity claimsIdentity, String encodedIdentityClaimSuffix) at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKey(String encodedIdentityClaimSuffix) at Microsoft.SharePoint.Utilities.SPUtility.GetFullUserKeyFromFullName(String fullName) at Microsoft.SharePoint.SPGlobal.CreateSPRequestAndSetIdentity(SPSite site, String name, Boolean bNotGlobalAdminCode, String strUrl, Boolean bNotAddToContext, Byte[] UserToken, SPAppPrincipalToken appPrincipalToken, String userName, Boolean bIgnoreTokenTimeout, Boolean bAsAnonymous) at Microsoft.SharePoint.SPSite.get_Request() at Mi... dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
    06/11/2014 10:17:32.03* w3wp.exe (0x1904) 0x0FAC SharePoint Foundation General 8sl1 High ...crosoft.SharePoint.SPSite.OpenWeb(Guid gWebId, Int32 mondoHint) at Microsoft.SharePoint.Publishing.CachedObjectFactory.OpenWebFromSuperUserSite(Guid webId) at Microsoft.SharePoint.Publishing.CacheManager..ctor(SPSite site) at Microsoft.SharePoint.Publishing.CacheManager.GetManager(SPSite site, Boolean useContextSite, Boolean allowContextSiteOptimization, Boolean refreshIfNoContext) at Microsoft.SharePoint.Publishing.CachedAreaLookup.EnsureLookup(Boolean errorsAsExceptions) at Microsoft.SharePoint.Publishing.CachedAreaLookup.GetCachedAreaOrException() at Microsoft.SharePoint.Publishing.Navigation.TaxonomyNavigationCache.GetCachedWebInfo(CachedAreaLookup cachedAreaLookup) at Microsoft.SharePoint.Publishing.Navigation.TaxonomyNavigationCache.GetWebNavigationSetting... dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
    06/11/2014 10:17:32.03* w3wp.exe (0x1904) 0x0FAC SharePoint Foundation General 8sl1 High ...s(CachedAreaLookup cachedArea, CachedAreaLookup& parentCachedArea, Exception& loadError) at Microsoft.SharePoint.Publishing.Navigation.TaxonomyNavigation.GetEffectiveProviderSettingsList(CachedAreaLookup cachedArea, Boolean includeInheritedSettings) at Microsoft.SharePoint.Publishing.Navigation.TaxonomyNavigation.GetEffectiveProviderSettings[T](CachedAreaLookup cachedArea, String siteMapProviderName, Boolean includeInheritedSettings, CachedAreaLookup& cachedAreaWithSettings) at Microsoft.SharePoint.Publishing.Navigation.TaxonomyNavigation.GetEffectiveProviderSettings[T](SPWeb web, String siteMapProviderName, Boolean includeInheritedSettings) at Microsoft.SharePoint.Publishing.Navigation.SwitchableSiteMapProvider.GetCurrentWrappedProvider() at Microsoft.SharePoint.Publis... dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
    06/11/2014 10:17:32.03* w3wp.exe (0x1904) 0x0FAC SharePoint Foundation General 8sl1 High ...hing.Navigation.SwitchableSiteMapProvider.get_RootNode() at Microsoft.SharePoint.Publishing.Navigation.SwitchableDataSourceBehavior.AssignProperties(SiteMapProvider targetProvider) at Microsoft.SharePoint.Publishing.Navigation.PortalSiteMapDataSource.OnInit(EventArgs e) at System.Web.UI.Control.InitRecursive(Control namingContainer) at System.Web.UI.Control.AddedControl(Control control, Int32 index) at Microsoft.SharePoint.WebControls.DelegateControl.AddControlResilient(Control ctl) dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
    06/11/2014 10:17:32.03 w3wp.exe (0x1904) 0x0FAC SharePoint Foundation General 8sl1 High DelegateControl: Exception thrown while adding control 'ASP._controltemplates_15_metadatanavtree_ascx': Microsoft.SharePoint.SPException: The specified user or domain group was not found. ---> System.Security.Principal.IdentityNotMappedException: Some or all identity references could not be translated. at System.Security.Principal.NTAccount.Translate(IdentityReferenceCollection sourceAccounts, Type targetType, Boolean forceSuccess) at System.Security.Principal.NTAccount.Translate(Type targetType) at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKeyClaim(IClaimsIdentity claimsIdentity, SPClaim loginClaim) --- End of inner exception stack trace --- at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKeyCla... dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
    06/11/2014 10:17:32.03* w3wp.exe (0x1904) 0x0FAC SharePoint Foundation General 8sl1 High ...im(IClaimsIdentity claimsIdentity, SPClaim loginClaim) at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKey(IClaimsIdentity claimsIdentity, String encodedIdentityClaimSuffix) at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKey(String encodedIdentityClaimSuffix) at Microsoft.SharePoint.Utilities.SPUtility.GetFullUserKeyFromFullName(String fullName) at Microsoft.SharePoint.SPGlobal.CreateSPRequestAndSetIdentity(SPSite site, String name, Boolean bNotGlobalAdminCode, String strUrl, Boolean bNotAddToContext, Byte[] UserToken, SPAppPrincipalToken appPrincipalToken, String userName, Boolean bIgnoreTokenTimeout, Boolean bAsAnonymous) at Microsoft.SharePoint.SPSite.get_Request() at Microsoft.SharePoint.SP... dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
    06/11/2014 10:17:32.03* w3wp.exe (0x1904) 0x0FAC SharePoint Foundation General 8sl1 High ...Site.OpenWeb(Guid gWebId, Int32 mondoHint) at Microsoft.SharePoint.Publishing.CachedObjectFactory.OpenWebFromSuperUserSite(Guid webId) at Microsoft.SharePoint.Publishing.CacheManager..ctor(SPSite site) at Microsoft.SharePoint.Publishing.CacheManager.GetManager(SPSite site, Boolean useContextSite, Boolean allowContextSiteOptimization, Boolean refreshIfNoContext) at Microsoft.Office.DocumentManagement.MetadataNavigation.MetadataNavigationSettings.GetCachedArea(SPWeb web) at Microsoft.Office.DocumentManagement.MetadataNavigation.MetadataNavigationContext.GetMetadataNavigationHintsForList(SPWeb web, Guid listGuid) at Microsoft.Office.DocumentManagement.MetadataNavigation.MetadataNavigationSettings.GetMetadataNavigationSettings(SPWeb web, Guid sourceListId, Boolean check... dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
    06/11/2014 10:17:32.03* w3wp.exe (0x1904) 0x0FAC SharePoint Foundation General 8sl1 High ...WebPropHint) at Microsoft.Office.DocumentManagement.MetadataNavigation.MetadataNavigationContext.get_NavigationSettings() at Microsoft.Office.DocumentManagement.MetadataNavigation.MetadataNavigationContext.EnsurePageInitEventHandling(Control controlOnPage) at Microsoft.Office.Server.WebControls.MetadataHierarchyDataSourceControl.OnInit(EventArgs e) at System.Web.UI.Control.InitRecursive(Control namingContainer) at System.Web.UI.Control.InitRecursive(Control namingContainer) at System.Web.UI.Control.InitRecursive(Control namingContainer) at System.Web.UI.Control.AddedControl(Control control, Int32 index) at Microsoft.SharePoint.WebControls.DelegateControl.AddControlResilient(Control ctl) dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
    06/11/2014 10:17:32.03 w3wp.exe (0x1904) 0x0FAC SharePoint Foundation General 8nca Medium Application error when access /SitePages/Home.aspx, Error=Some or all identity references could not be translated. at System.Security.Principal.NTAccount.Translate(IdentityReferenceCollection sourceAccounts, Type targetType, Boolean forceSuccess) at System.Security.Principal.NTAccount.Translate(Type targetType) at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKeyClaim(IClaimsIdentity claimsIdentity, SPClaim loginClaim) dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
    06/11/2014 10:17:32.03 w3wp.exe (0x1904) 0x0FAC SharePoint Foundation Runtime tkau Unexpected System.Security.Principal.IdentityNotMappedException: Some or all identity references could not be translated. at System.Security.Principal.NTAccount.Translate(IdentityReferenceCollection sourceAccounts, Type targetType, Boolean forceSuccess) at System.Security.Principal.NTAccount.Translate(Type targetType) at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKeyClaim(IClaimsIdentity claimsIdentity, SPClaim loginClaim) dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
    06/11/2014 10:17:32.03 w3wp.exe (0x1904) 0x0FAC SharePoint Foundation General ajlz0 High Getting Error Message for Exception System.Web.HttpUnhandledException (0x80004005): Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> Microsoft.SharePoint.SPException: The specified user or domain group was not found. ---> System.Security.Principal.IdentityNotMappedException: Some or all identity references could not be translated. at System.Security.Principal.NTAccount.Translate(IdentityReferenceCollection sourceAccounts, Type targetType, Boolean forceSuccess) at System.Security.Principal.NTAccount.Translate(Type targetType) at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKeyClaim(IClaimsIdentity claimsIdentity, SPClaim loginClaim) --- End of inner exception stack trace --- at Microsoft.SharePoint.Administration.... dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
    06/11/2014 10:17:32.03* w3wp.exe (0x1904) 0x0FAC SharePoint Foundation General ajlz0 High ...Claims.SPClaimProviderManager.GetProviderUserKeyClaim(IClaimsIdentity claimsIdentity, SPClaim loginClaim) at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKey(IClaimsIdentity claimsIdentity, String encodedIdentityClaimSuffix) at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKey(String encodedIdentityClaimSuffix) at Microsoft.SharePoint.Utilities.SPUtility.GetFullUserKeyFromFullName(String fullName) at Microsoft.SharePoint.SPGlobal.CreateSPRequestAndSetIdentity(SPSite site, String name, Boolean bNotGlobalAdminCode, String strUrl, Boolean bNotAddToContext, Byte[] UserToken, SPAppPrincipalToken appPrincipalToken, String userName, Boolean bIgnoreTokenTimeout, Boolean bAsAnonymous) at Microsoft.SharePoint.... dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
    06/11/2014 10:17:32.03* w3wp.exe (0x1904) 0x0FAC SharePoint Foundation General ajlz0 High ...SPSite.get_Request() at Microsoft.SharePoint.SPSite.OpenWeb(Guid gWebId, Int32 mondoHint) at Microsoft.SharePoint.Publishing.CachedObjectFactory.OpenWebFromSuperUserSite(Guid webId) at Microsoft.SharePoint.Publishing.CacheManager..ctor(SPSite site) at Microsoft.SharePoint.Publishing.CacheManager.GetManager(SPSite site, Boolean useContextSite, Boolean allowContextSiteOptimization, Boolean refreshIfNoContext) at Microsoft.SharePoint.Publishing.Internal.WebControls.PublishingRibbon.OnLoad(EventArgs e) at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at... dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
    06/11/2014 10:17:32.03* w3wp.exe (0x1904) 0x0FAC SharePoint Foundation General ajlz0 High ... System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.HandleError(Exception e) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest() at System.Web.UI.Page.ProcessRequest(HttpContext context) at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteS... dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
    06/11/2014 10:17:32.03* w3wp.exe (0x1904) 0x0FAC SharePoint Foundation General ajlz0 High ...tep(IExecutionStep step, Boolean& completedSynchronously) dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
    06/11/2014 10:17:32.03 w3wp.exe (0x1904) 0x0FAC SharePoint Foundation General aat87 Monitorable dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
    06/11/2014 10:17:32.05 w3wp.exe (0x1904) 0x0FAC SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Request (GET:http://sp13:80/SitePages/Home.aspx)). Execution Time=97.7205 dbc2999c-6f92-a0b4-a4e8-f7ed10437e35

    This is a very generic error message. 
    What user you are trying to search. Are you using username, display name or email address when searching
    Was any domain related changed done
    What if that users tried to logon to sharepoint site. 
    Does this error occur with all the account when you click edit? If not, based on the error,
    the user account which might be removed from Active Directory or renamed accidentally. Please have a check.
    Try to follow below:
    http://architectevangelist.wordpress.com/2010/12/07/sharepoint-2010-the-specified-user-or-domain-group-was-not-found/

  • Error when trying to access the RBAC User editor and Message tracking

    Hi,
    I am getting an error when trying to access the RBAC User editor and Message tracking on the Web Mgmt interface. I verified that the admin account trying to access is in the Organization Management group and has the correct Role Assignment Policy applied.
    I searched through this thread below and saw that matching the msExchRoleLink and msExchUserLink attributes fixed the issue. 
    https://social.technet.microsoft.com/Forums/exchange/en-US/fc568cc6-8691-4127-b70b-bcc82f9b1f7f/first-2010-cas-server-no-administrator-rights-emc-permissions-gone?forum=exchange2010
    However I have another environment where this is not the case and works just fine; the msExchUserLink attribute has a value of CN=Organization Management,OU=Microsoft Exchange Security Groups,DC=Domain,DC=Local which is different as per the issue outlined in
    the above thread so I am not convinced that this will work and also don’t want to blindly edit something in adsiedit without being sure.
    I then checked the event logs on the server and saw the below error logged;
    Current user: 'Domain/Server Services Accounts/administrator'
    Request for URL 'https://server.domain.com/ecp/default.aspx?p=AdminDeliveryReports&exsvurl=1' failed with the following error:
    System.Web.HttpUnhandledException: Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> Microsoft.Exchange.Management.ControlPanel.UrlNotFoundOrNoAccessException: The page may not be available or you might not have permission to open the
    page. Please contact your administrator for the required credentials. For new credentials to take effect, you have to close this window and log on again.
       at Microsoft.Exchange.Management.ControlPanel._Default.CreateNavTree()
       at Microsoft.Exchange.Management.ControlPanel._Default.OnLoad(EventArgs e)
       at System.Web.UI.Control.LoadRecursive()
       at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
       --- End of inner exception stack trace ---
       at System.Web.UI.Page.HandleError(Exception e)
       at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
       at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
       at System.Web.UI.Page.ProcessRequest()
       at System.Web.UI.Page.ProcessRequest(HttpContext context)
       at ASP.default_aspx.ProcessRequest(HttpContext context)
       at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
       at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
    Microsoft.Exchange.Management.ControlPanel.UrlNotFoundOrNoAccessException: The page may not be available or you might not have permission to open the page. Please contact your administrator for the required credentials. For new credentials to take effect, you
    have to close this window and log on again.
       at Microsoft.Exchange.Management.ControlPanel._Default.CreateNavTree()
       at Microsoft.Exchange.Management.ControlPanel._Default.OnLoad(EventArgs e)
       at System.Web.UI.Control.LoadRecursive()
       at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
    I then had a look at the IIS permissions for ecp and owa. The account did not have permissions so I added them there but still got the same error. I’ve also tried all of the above with a newly-created account but still got the same issue.
    Any ideas as to what the above event log is specifically referring to?

    Hi,
    From your description, I would like to clarify the following thing:
    If you want to search message tracking logs, the account you use should be a member of the role groups below:
    Organization Management role group, Records Management role group, Recipient Management role group.
    Hope this can be helpful to you.
    Best regards,
    Amy Wang
    TechNet Community Support

  • "An error occurred sending the command to the application" When trying to open excel document from outlook 2007

    Error message "An error occurred sending the command to the application" When trying to open excel document from outlook 2007.
    OS: Windows Server 2008 R2
    If I save the document then it opens fine, messing with default file associations does not resolve this problem, I've googled for ir it and some suggest unticking compatibility mode or "run as admin" for excel application, neither is selected in my case.
    Outlook is configured to run as remote application from remoteApp server, this error is only occurring for one user, for others excel documents open just fine.

    Hi
    Thank you for using
    Microsoft Office for IT Professionals Forums.
    From your description, we can Create a trusted location follow these steps
    Click the Microsoft Office Button , and then click Excel Options.
    Click Trust Center, click Trust Center Settings, and then click
    Trusted Locations.
    If you want to create a trusted location that is not local to your computer, select the Allow trusted locations on my network (not recommended) check
    box.
    Click Add new location.
     IMPORTANT   We recommended that you don't make your entire
    Documents or My Documents folder a trusted location. Doing so creates a larger target for a hacker to potentially exploit and increases your security risk. Create a subfolder within Documents or My Documents, and make only that folder a trusted location.
    In the Path box, type the name of the folder that you want to use as a trusted location, or click Browse to
    locate the folder.
    If you want to include subfolders as trusted locations, select the
    Subfolders of this location are also trusted check box.
    In the Description box, type what you want to describe the purpose of the trusted location.
    Click OK.
    More detailed information you can refer to this link:
    http://office.microsoft.com/en-us/word-help/create-remove-or-change-a-trusted-location-for-your-files-HA010031999.aspx?CTT=1#BM12
    Please take your time to try the suggestions and let me know the results at your earliest convenience. If anything is unclear or if there is anything
    I can do for you, please feel free to let me know.
    Hope that helps.
    Sincerely
    William Zhou CHN
    Please remember to mark the replies as answers if they help and unmark them if they provide no help.

  • TS4425 when trying to access photo stream on Apple TV, I am getting the error message terms and conditions have changed, but when I go into iCloud on my Mac the new terms and conditions are not appearing - How can I manually agree to them ?

    When trying to access photo stream on Apple TV, I am getting the error message terms and conditions have changed, but when I go into iCloud on my Mac the new terms and conditions are not appearing - How can I manually agree to them ?

    Welcome to the Apple Community.
    The following article(s) may help you.
    Photo Stream ToU's

  • Error 403 Reported when trying to access web page through a program.

    I was writing a program for fun, to try to download a web page, pdf or anything from the web. The program works fine when given local file system path in URL and also works well when i tried to access a page from the tomcat installed on my machine but gives a error 403 when tried to access URL's outside the system. Tried to read about 403, seems that many sites does not allow to access a particular URL directly using the directory structure, you have to pass thru different hyperlinks before reaching resource.
    IS THERE ANY WAY THIS PROBLEM CAN BE SOLVED.
    import java.io.*;
    import java.net.*;
    class TestDownload
         public static void main(String[] args)
              try
                   URL url = new URL("http://www.webmasterworld.com/forum48/1966.htm");
              //     URL url = new URL("http://localhost:8080/index.html");
              //     URL url = new URL("file:\\C:\\web_2.pdf");
                   URLConnection connection = url.openConnection();
                   InputStream stream = connection.getInputStream();
                   BufferedInputStream in = new BufferedInputStream(stream);
                   FileOutputStream file = new FileOutputStream("x.html");
                   BufferedOutputStream out = new BufferedOutputStream(file);
                   int i;
                   while ((i = in.read()) != -1) {
                        out.write(i);
                   out.flush();
              catch(IOException e)
                   e.printStackTrace();
              System.out.println("Hello World!");
    }

    I was writing a program for fun, to try to download a web page, pdf or anything from the web. The program works fine when given local file system path in URL and also works well when i tried to access a page from the tomcat installed on my machine but gives a error 403 when tried to access URL's outside the system. Tried to read about 403, seems that many sites does not allow to access a particular URL directly using the directory structure, you have to pass thru different hyperlinks before reaching resource.
    IS THERE ANY WAY THIS PROBLEM CAN BE SOLVED.
    import java.io.*;
    import java.net.*;
    class TestDownload
         public static void main(String[] args)
              try
                   URL url = new URL("http://www.webmasterworld.com/forum48/1966.htm");
              //     URL url = new URL("http://localhost:8080/index.html");
              //     URL url = new URL("file:\\C:\\web_2.pdf");
                   URLConnection connection = url.openConnection();
                   InputStream stream = connection.getInputStream();
                   BufferedInputStream in = new BufferedInputStream(stream);
                   FileOutputStream file = new FileOutputStream("x.html");
                   BufferedOutputStream out = new BufferedOutputStream(file);
                   int i;
                   while ((i = in.read()) != -1) {
                        out.write(i);
                   out.flush();
              catch(IOException e)
                   e.printStackTrace();
              System.out.println("Hello World!");
    }

  • Login error when trying to access iCloud Mail

    I am receiving the following error when trying to access iCloud Mail. All other iCloud services are functioning.
    IS FATAL
    true
    APPLICATION NAME
    mail
    TITLE
    Mail could not be loaded
    MESSAGE
    There was a problem loading the application due to a possible network error or missing resources. Please try again.
    LOG
    Tue, 10 Mar 2015 12:39:58 GMT:  DEBUG: MAIL in main()
    Tue, 10 Mar 2015 12:39:58 GMT:  DEBUG: Creating local CK.User object
    Tue, 10 Mar 2015 12:39:58 GMT:  DEBUG: Creating local CK.AccountPreferences object
    Tue, 10 Mar 2015 12:39:58 GMT:  DEBUG: -->  Request 1:   POST to https://p03-mailws.icloud.com:443/wm/preference?clientBuildNumber=15B.9bb3ce9&cl ientId=523F12B2-FC11-4D72-952C-A9AA1C424022&dsid=103705688,  headers: Content-Type=text/plain,  body: (omitted)
    Tue, 10 Mar 2015 12:39:58 GMT:  DEBUG: ----------------> Request out: /wm/preference-list-->1425991198034/1
      wmsid: null
      params: {"locale":"en-us","timeZone":"US/Central"}
    Tue, 10 Mar 2015 12:39:58 GMT:  DEBUG: SC.Object:sc1473:dispatch('load content')
    Tue, 10 Mar 2015 12:39:58 GMT:  DEBUG: "2.0 Waiting for Content" handled event 'load content' (no transition)
    Tue, 10 Mar 2015 12:39:58 GMT:  DEBUG: SC.Object:sc2647:dispatch('noContent')
    Tue, 10 Mar 2015 12:39:58 GMT:  DEBUG:   "6.2 pop up View" handled event 'noContent' with a transition to "6.2.2 No Content"
    Tue, 10 Mar 2015 12:39:58 GMT:  DEBUG:     -> entering "6.2.2 No Content"
    Tue, 10 Mar 2015 12:39:58 GMT:  WARN:  REJECTING SERVER RESPONSE CoreMail.MailRequest.willReceive:
      Status:0
      Request:/wm/preference
      Wmsid:null
      Redirect Count:1
      Timeout Redirect Count:1
      ResponseText:
    Tue, 10 Mar 2015 12:39:58 GMT:  DEBUG: -->  Request 2:   POST to https://p03-mailws.icloud.com:443/wm/preference?clientBuildNumber=15B.9bb3ce9&cl ientId=523F12B2-FC11-4D72-952C-A9AA1C424022&dsid=103705688,  headers: Content-Type=text/plain,  body: (omitted)
    Tue, 10 Mar 2015 12:39:58 GMT:  DEBUG: ----------------> Request out: /wm/preference-list-->1425991198034/1
      wmsid: null
      params: {"locale":"en-us","timeZone":"US/Central"}
    Tue, 10 Mar 2015 12:39:58 GMT:  ERROR: GIVING UP ON RETRIES, CoreMail.MailRequest.willReceive:
    responseText: ,
    this._redirectCount: 1
    Tue, 10 Mar 2015 12:39:58 GMT:  DEBUG: <--  Response 2:  0  (72ms),  headers:   body: (empty)
    Tue, 10 Mar 2015 12:39:58 GMT:  DEBUG: <---------------- Request in: /wm/preference-list-->1425991198034/1,httpStatus: 0,round trip time: 71ms, wmsid: null
    Tue, 10 Mar 2015 12:39:58 GMT:  ERROR: retrieveResponseError:
      ServerPreferencesDataSource.retrieveResponse
      error:-1/0
      guid:serverPrefsGuid
    Tue, 10 Mar 2015 12:39:58 GMT:  ERROR: Bootstrap error: Preferences.RefreshError
    TYPE
    server
    APP STATECHART
    SC.Statechart:sc1030
      initialized: true
      name: cloudos-statechart
      current-states: [
        active.springboard.displayingSpringboard.springboard
      state-transition:
        active: false
        suspended: false
      handling-event: false
    BUILD NUMBER
    15B.169e9f7
    TIME
    Tue Mar 10 2015 07:40:01 GMT-0500 (CDT)        (1425991201489)
    HOST
    www.icloud.com
    USER AGENT
    Mozilla/5.0 (Macintosh; Intel Mac OS X 10_10_2) AppleWebKit/600.3.18 (KHTML, like Gecko) Version/8.0.3 Safari/600.3.18
    DSID
    103705688
    ENVIRONMENT
    PROD
    RECENT LOG MESSAGES
    Tue, 10 Mar 2015 12:39:58 GMT:  DEBUG: MAIL in main()
    Tue, 10 Mar 2015 12:39:58 GMT:  DEBUG: Creating local CK.User object
    Tue, 10 Mar 2015 12:39:58 GMT:  DEBUG: Creating local CK.AccountPreferences object
    Tue, 10 Mar 2015 12:39:58 GMT:  DEBUG: -->  Request 1:   POST to https://p03-mailws.icloud.com:443/wm/preference?clientBuildNumber=15B.9bb3ce9&cl ientId=523F12B2-FC11-4D72-952C-A9AA1C424022&dsid=103705688,  headers: Content-Type=text/plain,  body: (omitted)
    Tue, 10 Mar 2015 12:39:58 GMT:  DEBUG: ----------------> Request out: /wm/preference-list-->1425991198034/1
      wmsid: null
      params: {"locale":"en-us","timeZone":"US/Central"}
    Tue, 10 Mar 2015 12:39:58 GMT:  DEBUG: SC.Object:sc1473:dispatch('load content')
    Tue, 10 Mar 2015 12:39:58 GMT:  DEBUG: "2.0 Waiting for Content" handled event 'load content' (no transition)
    Tue, 10 Mar 2015 12:39:58 GMT:  DEBUG: SC.Object:sc2647:dispatch('noContent')
    Tue, 10 Mar 2015 12:39:58 GMT:  DEBUG:   "6.2 pop up View" handled event 'noContent' with a transition to "6.2.2 No Content"
    Tue, 10 Mar 2015 12:39:58 GMT:  DEBUG:     -> entering "6.2.2 No Content"
    Tue, 10 Mar 2015 12:39:58 GMT:  WARN:  REJECTING SERVER RESPONSE CoreMail.MailRequest.willReceive:
      Status:0
      Request:/wm/preference
      Wmsid:null
      Redirect Count:1
      Timeout Redirect Count:1
      ResponseText:
    Tue, 10 Mar 2015 12:39:58 GMT:  DEBUG: -->  Request 2:   POST to https://p03-mailws.icloud.com:443/wm/preference?clientBuildNumber=15B.9bb3ce9&cl ientId=523F12B2-FC11-4D72-952C-A9AA1C424022&dsid=103705688,  headers: Content-Type=text/plain,  body: (omitted)
    Tue, 10 Mar 2015 12:39:58 GMT:  DEBUG: ----------------> Request out: /wm/preference-list-->1425991198034/1
      wmsid: null
      params: {"locale":"en-us","timeZone":"US/Central"}
    Tue, 10 Mar 2015 12:39:58 GMT:  ERROR: GIVING UP ON RETRIES, CoreMail.MailRequest.willReceive:
    responseText: ,
    this._redirectCount: 1
    Tue, 10 Mar 2015 12:39:58 GMT:  DEBUG: <--  Response 2:  0  (72ms),  headers:   body: (empty)
    Tue, 10 Mar 2015 12:39:58 GMT:  DEBUG: <---------------- Request in: /wm/preference-list-->1425991198034/1,httpStatus: 0,round trip time: 71ms, wmsid: null
    Tue, 10 Mar 2015 12:39:58 GMT:  ERROR: retrieveResponseError:
      ServerPreferencesDataSource.retrieveResponse
      error:-1/0
      guid:serverPrefsGuid
    Tue, 10 Mar 2015 12:39:58 GMT:  ERROR: Bootstrap error: Preferences.RefreshError

    After activatin iCloud, my dotMac account wouldn't retrieve mail anymore. It kept saying that my username or password were not good. No matter how many times I tried, I couldn't restore the service.
    Here's how I got it working again.
    Apparently my 6 letter password is no longer acceptable. You need to update it to an 8 letter password that includes numbers and capital letters.
    So I went to https://iforgot.apple.com and asked to reset my password.
    Because I could still get my emails logging into iCloud with Safari, I responded to Apple's email, and created a stronger password.
    Than I updated the passwords on my computer's Mail program, iPhone, and iPad (and of course everything else, iTunes, etc.).
    That was it!
    Everything works as normal again, I even was finally able to synchronize calendars over different computers again.
    Try it out, it could be your issue as well.

  • HTTP error when trying to access RESTful web service from application

    Hi,
    We are getting the following error when trying to access a RESTful web service coming from Apex workspace 4.2.1 and Apex listener 2.1:
    ORA-29273: HTTP request failed ORA-06512: at "SYS.UTL_HTTP", line 1130 ORA-29024: Certificate validation failure
    In the Debug report, besides the above I also see:
    error_backtrace: ORA-06512: at "SYS.UTL_HTTP", line 1130 ORA-06512: at "APEX_040200.WWV_FLOW_WEB_SERVICES", line 543 ORA-06512: at "APEX_040200.WWV_FLOW_WEB_SERVICES", line 1164 ORA-06512: at "APEX_040200.WWV_FLOW_PROCESS", line 396
    We get that error whether we use https or http in the URI pointing to the web service. When I test the Web Service in Workspace RESTful service GUI, I get the data back. When I go build an application with a report calling the RESTful Web Service I get that error. Both the Application and the Workspace RESTful services are on the same Apex environment and even the same workspace.
    What is odd is that I can actually put the URL of the web service into a browser and I get the data: (using the demo hr data in sample RESTful services.)
    IN browser-- https://weblogic-dev.edu/apex/ace/hr/empinfo/
    yields:
    7839,KING,PRESIDENT,,1981-11-17T05:00:00Z,5000,,10 7698,BLAKE,MANAGER,7839,1981-05-01T04:00:00Z,2850,,30 7782,CLARK,MANAGER,7839,1981-06-09T04:00:00Z,2450,,10 7566,JONES,MANAGER,7839,1981-04-02T05:00:00Z,2975,,20 7788,SCOTT,ANALYST,7566,1982-12-09T05:00:00Z,3000,,20 7902,FORD,ANALYST,7566,1981-12-03T05:00:00Z,3000,,20 7369,SMITH,CLERK,7902,1980-12-17T05:00:00Z,800,,20 7499,ALLEN,SALESMAN,7698,1981-02-20T05:00:00Z,1600,300,30 7521,WARD,SALESMAN,7698,1981-02-22T05:00:00Z,1250,500,30 7654,MARTIN,SALESMAN,7698,1981-09-28T04:00:00Z,1250,1400,30 7844,TURNER,SALESMAN,7698,1981-09-08T04:00:00Z,1500,0,30 7876,ADAMS,CLERK,7788,1983-01-12T05:00:00Z,1100,,20 7900,JAMES,CLERK,7698,1981-12-03T05:00:00Z,950,,30 7934,MILLER,CLERK,7782,1982-01-23T05:00:00Z,1300,,10
    Any ideas on what would be causing the Error above in our application?
    Thanks,
    Pat
    Edited by: patfmnd on Mar 11, 2013 3:25 PM
    In reviewing the above error, I think we are realizing that we have to have the Weblogic layer SSL cert (actually the CERT from our BigIP load balancer which also does our SSL termination) imported into the Oracle server wallet where Apex is installed. Am I correct?
    PM

    We resolved our problem. The Apex Administrative Guide made us realize that we had to set up Wallet path in the Instance. This required working with DBAs to follow the Advanced networking guide to get the wallet set up on our server. We then added that path to the Instance configuration. (Manager Instance --> Instance settings). We ran into another other issue related to our implementation of CAS but were able to resolve that, and 'voila' were able to get the sample RESTful service consumed by our application!!
    Now to the task of figuring out how to get Basic Auth working between client application and RESTful web service. If anyone has that working, let us know!!
    It would be helpful if in the documentation of the Apex 2.x listener or Apex install/configuration there was clear reference to the above steps required for HTTPS access to RESTful web services.
    Pat

  • Error when trying to access a form through https

    Hi,
    I'm facing this error when trying to access a form through https, i'm using OAS10g 10.1.2.3 over linux, it has webutil configured and is working perfectly with https
    I'm accessing the form through webcache.
    the error:
    Java Plug-in 1.6.0_37
    Usar versión JRE 1.6.0_37-b06 Java HotSpot(TM) Client VM
    Directorio local del usuario = C:\Users\Carlos
    c:   borrar ventana de consola
    f:   finalizar objetos en la cola de finalización
    g:   liberación de recursos
    h:   presentar este mensaje de ayuda
    l:   volcar lista del cargador de clases
    m:   imprimir sintaxis de memoria
    o:   activar registro
    q:   ocultar consola
    r:   recargar configuración de norma
    s:   volcar propiedades del sistema y de despliegue
    t:   volcar lista de subprocesos
    v:   volcar pila de subprocesos
    x:   borrar antememoria del cargador de clases
    0-5: establecer nivel de rastreo en <n>
    cargar: clase oracle.forms.webutil.common.RegisterWebUtil no encontrada.
    java.lang.ClassNotFoundException: oracle.forms.webutil.common.RegisterWebUtil
         at sun.plugin2.applet.Applet2ClassLoader.findClass(Unknown Source)
         at sun.plugin2.applet.Plugin2ClassLoader.loadClass0(Unknown Source)
         at sun.plugin2.applet.Plugin2ClassLoader.loadClass(Unknown Source)
         at sun.plugin2.applet.Plugin2ClassLoader.loadClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at sun.plugin2.applet.Plugin2ClassLoader.loadCode(Unknown Source)
         at sun.plugin2.applet.Plugin2Manager.createApplet(Unknown Source)
         at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    Excepción: java.lang.ClassNotFoundException: oracle.forms.webutil.common.RegisterWebUtil
    cargar: clase oracle.forms.engine.Main no encontrada.
    java.lang.ClassNotFoundException: oracle.forms.engine.Main
         at sun.plugin2.applet.Applet2ClassLoader.findClass(Unknown Source)
         at sun.plugin2.applet.Plugin2ClassLoader.loadClass0(Unknown Source)
         at sun.plugin2.applet.Plugin2ClassLoader.loadClass(Unknown Source)
         at sun.plugin2.applet.Plugin2ClassLoader.loadClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at sun.plugin2.applet.Plugin2ClassLoader.loadCode(Unknown Source)
         at sun.plugin2.applet.Plugin2Manager.createApplet(Unknown Source)
         at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    Excepción: java.lang.ClassNotFoundException: oracle.forms.engine.Mainwhat could be the reason it can not find the webutil libraries with https ?? i tried erasing the java's cache but still the same error :(
    Regards
    Carlos

    I got it, i only had to check the option 'Use SSL 2.0 compatible ClientHello format' from the java's control panel advanced tab.
    Metalink's note: 787739.1
    :)

  • Just recently I am getting the following error message when trying to access web sites. I get a pop up window stating "Exc in ev handl: TypeError: c.location is null" then I have to click ok. It is an issue with some plug-in?

    Just recently I am getting the following error message when trying to access web sites. I am using Firefox browser version 10.0.2. I get a pop up window stating "Exc in ev handl: TypeError: c.location is null" as the web site page is being displayed in browser winder. Then I have to click ok. It doesn't matter what web link/site I go to it happens. It is an issue with some plug-in?

    I have advised McAfee's product team of the problem and this thread, and they're looking into it now.

  • Error occurred when trying to access DC in web dynpro

    Hi,
    Have everyone ever encountered an error saying <b>"Unhandled exception caught in event loop"</b> when trying to access DCs in web dynpro?  I tried to add a new action to my main compnent after a used web dynpro component (DC) was added but the web dynpro would shut down automatically.  The web dynpro would shut down accidentally and automatically even when I clicked the interface controller.  Some times, the error log would repport "<b>org.eclipse.swt.SWTError: No more handles</b>"...it has driven me crazy.  I could not go further.  Can someone tell me what I have done wrong to get these errors?!!
    thanks,
    Zita

    Dear Zita,
    I error is related tot he message which you get "No more handles".
    This definitelly means that there is a bug and old files are not closed , thus the number of handles on OS level is exceeded.
    The exact way to debug the "handles" leak is with applying SAP JVM Profiler, using the I/O Analysis feature.
    http://www.sdn.sap.com/irj/scn/downloads?rid=/library/uuid/a0a67d7d-36e9-2a10-3a99-94fc8caaea0e
    Best Regards,
    Sylvia

  • Random users receive an unexpected error when trying to access SharePoint 2010 farm.

    Over the past few months we had occasions where established users trying to connect to my production SharePoint 2010 farm receive a correlation error page when trying to access the farm. I have two WFEs load balanced and the errors show up on either so it
    doesn't happen on just on or the other. Specifically today it was three users in one office  out of about 15 that were affected the rest were able to access the farm without any problems and there were no other reports from other offices. Each time the
    user can eventually get in without any outside intervention it just seems to fix itself after a few hours. Each time it happens I search the logs for the CorrelationID(s) and everytime I see the same set of errors in the ULS logs. I also go check the Windows
    Security logs to make sure they connected to the server okay. I've confirmed that the Web App's PortalSuperUserAccount and PortalSuperReaderAccount are both set correctly. Just looking to see if anyone has experienced this and figured what was happening and
    how to fix it.
    These are the log entries:
    Name=Request   (GET:http://infoshare.swic.edu:80/SitePages/Home.aspx)
    Begin Query the AD to get the user email   and display name.
    End Query the AD to get the user email   and display name.
    Leaving Monitored Scope   (GetFileAndMetaInfo). Execution Time=29.4404440877166
    Leaving Monitored Scope   (GetWebPartPageContent). Execution Time=29.6140602113035
    Site=/
    Leaving Monitored Scope   (PostResolveRequestCacheHandler). Execution Time=30.6330444222452
    SPWeb is missing it's CurrentUser for   user 'SHAREPOINT\system'.
    PortalSiteMapProvider was unable to fetch   current node, request URL: /SitePages/Home.aspx, message: Object reference   not set to an instance of an object., stack trace:   
    at   Microsoft.SharePoint.SPUser.get_UserToken()    
    at   Microsoft.SharePoint.Publishing.CommonUtilities.<>c__DisplayClass1.<RunWithElevatedSite>b__0()    
    at   Microsoft.SharePoint.SPSecurity.<>c__DisplayClass4.<RunWithElevatedPrivileges>b__2()    
    at   Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated   secureCode)    
    at   Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(WaitCallback   secureCode, Object param)    
    at   Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(CodeToRunElevated   secureCode)    
    at Microsoft.SharePoint.Publishing.CommonUtilities.RunWithElevatedSite(SPSite   siteNonEle...
    ...v, Boolean allowUnsafeUpdates,   ElevatedSiteProcessor callWithElevatedSite)    
    at   Microsoft.SharePoint.Publishing.CacheManager..ctor(SPSite site)    
    at Microsoft.SharePoint.Publishing.CacheManager.GetManager(SPSite   site, Boolean useContextSite, Boolean allowContextSiteOptimization)    
    at   Microsoft.SharePoint.Publishing.Navigation.PortalSiteMapProvider.get_ObjectFactory()    
    at   Microsoft.SharePoint.Publishing.Navigation.PortalSiteMapProvider.get_CurrentNode()
    SPWeb is missing it's CurrentUser for   user 'SHAREPOINT\system'.
    DelegateControl: Exception thrown while   adding control 'ASP._controltemplates_metadatanavtree_ascx': Object reference   not set to an instance of an object.
    Setting [Display] as the   FormContext.FormMode for the current page
    SPWeb is missing it's CurrentUser for   user 'SHAREPOINT\system'.
    PortalSiteMapProvider was unable to fetch   root node, request URL: /SitePages/Home.aspx, message: Object reference not   set to an instance of an object., stack trace:   
    at   Microsoft.SharePoint.SPUser.get_UserToken()    
    at   Microsoft.SharePoint.Publishing.CommonUtilities.<>c__DisplayClass1.<RunWithElevatedSite>b__0()    
    at   Microsoft.SharePoint.SPSecurity.<>c__DisplayClass4.<RunWithElevatedPrivileges>b__2()    
    at   Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated   secureCode)    
    at   Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(WaitCallback   secureCode, Object param)    
    at   Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(CodeToRunElevated   secureCode)    
    at Microsoft.SharePoint.Publishing.CommonUtilities.RunWithElevatedSite(SPSite   siteNonElev, ...
    ...Boolean allowUnsafeUpdates,   ElevatedSiteProcessor callWithElevatedSite)    
    at   Microsoft.SharePoint.Publishing.CacheManager..ctor(SPSite site)    
    at Microsoft.SharePoint.Publishing.CacheManager.GetManager(SPSite   site, Boolean useContextSite, Boolean allowContextSiteOptimization)    
    at   Microsoft.SharePoint.Publishing.Navigation.PortalSiteMapProvider.get_ObjectFactory()    
    at   Microsoft.SharePoint.Publishing.Navigation.PortalSiteMapProvider.get_TryGetRootNode()
    SPWeb is missing it's CurrentUser for   user 'SHAREPOINT\system'.
    PortalSiteMapProvider was unable to fetch   root node, request URL: /SitePages/Home.aspx, message: Object reference not   set to an instance of an object., stack trace:   
    at   Microsoft.SharePoint.SPUser.get_UserToken()    
    at   Microsoft.SharePoint.Publishing.CommonUtilities.<>c__DisplayClass1.<RunWithElevatedSite>b__0()    
    at   Microsoft.SharePoint.SPSecurity.<>c__DisplayClass4.<RunWithElevatedPrivileges>b__2()    
    at   Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated   secureCode)    
    at   Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(WaitCallback   secureCode, Object param)    
    at   Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(CodeToRunElevated   secureCode)    
    at Microsoft.SharePoint.Publishing.CommonUtilities.RunWithElevatedSite(SPSite   siteNonElev, ...
    ...Boolean allowUnsafeUpdates,   ElevatedSiteProcessor callWithElevatedSite)    
    at   Microsoft.SharePoint.Publishing.CacheManager..ctor(SPSite site)    
    at Microsoft.SharePoint.Publishing.CacheManager.GetManager(SPSite   site, Boolean useContextSite, Boolean allowContextSiteOptimization)    
    at   Microsoft.SharePoint.Publishing.Navigation.PortalSiteMapProvider.get_ObjectFactory()    
    at   Microsoft.SharePoint.Publishing.Navigation.PortalSiteMapProvider.GetRootNodeCore()
    Exception in   SearchBoxEx::CreateChildControls:System.ArgumentException: Requested value   '/sites/search/Pages/' was not found.      
    at System.Enum.Parse(Type enumType, String value, Boolean ignoreCase)    
    at   Microsoft.SharePoint.Portal.WebControls.SearchBoxEx.GetSiteDefaultsInner(PortalWebSiteMapNode   rootWeb, SPSite site)    
    at   Microsoft.SharePoint.Portal.WebControls.SearchBoxEx.<>c__DisplayClass2.<GetSiteDefaults>b__0()    
    at   Microsoft.SharePoint.SPSecurity.<>c__DisplayClass4.<RunWithElevatedPrivileges>b__2()    
    at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated   secureCode)    
    at   Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(WaitCallback   secureCode, Object param)    
    at   Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(CodeToRunElevated...
    ... secureCode)    
    at   Microsoft.SharePoint.Portal.WebControls.SearchBoxEx.GetSiteDefaults()    
    at   Microsoft.SharePoint.Portal.WebControls.SearchBoxEx.CreateChildControls()
    SPWeb is missing it's CurrentUser for   user 'SHAREPOINT\system'.
    Failed to create a custom control   'PublishingSiteActionsMenuCustomizer', feature 'Publishing'   (id:22a9ef51-737b-4ff2-9346-694633fe4416) using attributes (ControlSrc='',   ControlAssembly='Microsoft.SharePoint.Publishing,
    Version=14.0.0.0,   Culture=neutral, PublicKeyToken=71e9bce111e9429c',   ControlClass='Microsoft.SharePoint.Publishing.WebControls.PublishingSiteActionsMenuCustomizer':   System.Reflection.TargetInvocationException: Exception has been thrown
    by the   target of an invocation. ---> System.NullReferenceException: Object   reference not set to an instance of an object.    
    at   Microsoft.SharePoint.SPUser.get_UserToken()    
    at   Microsoft.SharePoint.Publishing.CommonUtilities.<>c__DisplayClass1.<RunWithElevatedSite>b__0()    
    at   Microsoft.SharePoint.SPSecurity.<>c__DisplayClass4.<RunWithElev...
    ...atedPrivileges>b__2()    
    at   Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated   secureCode)    
    at   Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(WaitCallback   secureCode, Object param)    
    at   Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(CodeToRunElevated   secureCode)    
    at   Microsoft.SharePoint.Publishing.CommonUtilities.RunWithElevatedSite(SPSite   siteNonElev, Boolean allowUnsafeUpdates, ElevatedSiteProcessor   callWithElevatedSite)    
    at   Microsoft.SharePoint.Publishing.CacheManager..ctor(SPSite site)    
    at   Microsoft.SharePoint.Publishing.CacheManager.GetManager(SPSite site, Boolean   useContextSite, Boolean allowContextSiteOptimization)    
    at Microsoft.SharePoint.Publishing.WebControls.CombinedBasePermissions..ctor()    
    at Microsoft.ShareP...
    ...oint.Publishing.WebControls.ConsoleVisibleUtilities.get_CanShowSiteActionsMenuItems()    
    at   Microsoft.SharePoint.Publishing.WebControls.PublishingSiteActionsMenuCustomizer..ctor()    
    at   System.RuntimeType.CreateInstanceImpl(Boolean publicOnly, Boolean   skipVisibilityChecks, Boolean fillCache)      
    --- End of inner exception stack trace ---    
    at System.RuntimeType.CreateInstanceImpl(Boolean   publicOnly, Boolean skipVisibilityChecks, Boolean fillCache)    
    at System.Activator.CreateInstance(Type   type, Boolean nonPublic)    
    at   Microsoft.SharePoint.Utilities.SPUtility.CreateServerControlFromAssembly(String   sControlAssembly, String sControlClass)      
    at   Microsoft.SharePoint.SPControlElement.BuildCustomControl(TemplateControl   tctlPage, String sControlAssembly, String sControlClass, String sCon...
    ...trolSrc, XmlNode xnElementDefinition,   SPFeatureDefinition featdefElement, String sElementId)    
    at   Microsoft.SharePoint.SPCustomActionElement.BuildCustomControl(TemplateControl   tctlParent)    
    at   Microsoft.SharePoint.WebControls.FeatureMenuTemplate.CreateChildControls().
    SPWeb is missing it's CurrentUser for   user 'SHAREPOINT\system'.
    System.NullReferenceException: Object   reference not set to an instance of an object.   
    at   Microsoft.SharePoint.SPUser.get_UserToken()    
    at Microsoft.SharePoint.Publishing.CommonUtilities.<>c__DisplayClass1.<RunWithElevatedSite>b__0()    
    at   Microsoft.SharePoint.SPSecurity.<>c__DisplayClass4.<RunWithElevatedPrivileges>b__2()    
    at   Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated   secureCode)    
    at   Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(WaitCallback   secureCode, Object param)    
    at   Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(CodeToRunElevated   secureCode)    
    at   Microsoft.SharePoint.Publishing.CommonUtilities.RunWithElevatedSite(SPSite siteNonElev,   Boolean allowUnsafeUpdates, ElevatedSiteProcessor callWithElevatedSite)    
    at M...
    ...icrosoft.SharePoint.Publishing.CacheManager..ctor(SPSite   site)    
    at   Microsoft.SharePoint.Publishing.CacheManager.GetManager(SPSite site, Boolean   useContextSite, Boolean allowContextSiteOptimization)    
    at   Microsoft.SharePoint.Publishing.WebControls.ConsoleUtilities.IsMasterPageGalleryUrlForSite(Uri   uri)    
    at   Microsoft.SharePoint.Publishing.WebControls.ConsoleVisibleUtilities.ConsoleAppliesInCurrentContext()    
    at   Microsoft.SharePoint.Publishing.Internal.WebControls.PublishingRibbon.OnLoad(EventArgs   e)    
    at   System.Web.UI.Control.LoadRecursive()      
    at System.Web.UI.Control.LoadRecursive()    
    at   System.Web.UI.Control.LoadRecursive()      
    at System.Web.UI.Control.LoadRecursive()    
    at   System.Web.UI.Control.LoadRecursive()      
    at System.Web.UI.Control.LoadRecursive()    
    at System.Web...
    ....UI.Control.LoadRecursive()    
    at   System.Web.UI.Control.LoadRecursive()      
    at System.Web.UI.Control.LoadRecursive()    
    at System.Web.UI.Page.ProcessRequestMain(Boolean   includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
    Leaving Monitored Scope (Request   (GET:http://infoshare.swic.edu:80/SitePages/Home.aspx)). Execution   Time=78.9268136821824

    Hi LonF1,
    For solving your issue, please try to update the SuperUser and SuperReader per the article below:
    http://technet.microsoft.com/en-us/library/ff758656.aspx
    $wa = Get-SPWebApplication -Identity "<WebApplication>"
    $wa.Properties["portalsuperuseraccount"] = "<SuperUser>"
    $wa.Properties["portalsuperreaderaccount"] = "<SuperReader>"
    $wa.Update()
    If this issue still exists, please feel free to let me know.
    Best Regards,
    Wendy
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Wendy Li
    TechNet Community Support

  • Fix for "Not Connected" Error Messages When Trying to Access Web Services

    If you run across an error message on your printer stating that it is "Not Connected" when trying to access ePrint or your Apps, but you know it is connected to the internet, it probably just means that the printer is not connecting to the server properly.
    Here is the first set of steps I would try, since they seem to resolve this issue half of the time.
    The first thing I would try in this situation is a network reboot.
    First, disconnect the power cord from the back of your router. 
    Next disconnect the power cord from either the back of the printer or the wall, without powering it off first. 
    Wait about 30 seconds and reconnect the power cord to your router.
    Wait about another 30 seconds and plug the printer back in. It should boot back up automatically, but if it doesn't go ahead and press the power button.
    Once everything is back up and running, try to access ePrint or your Apps.
    If those steps don't work for you, the next thing would be setting a Static IP & DNS for the printer. Before doing this, you want to print off a network configuration page. It varies from model to model, but it is usually found under the Wireless Settings or under Reports in the Setup menu. After you have that page, follow these steps.
    Before we start, we need a network configuration page with your current connection settings. To get this, press the wireless button on the front of your printer and then press "Print Info" or "Print Report". This will print off a network configuration page, which has information on it that we need to complete the next few steps.
    After you have that, we will need to access the printers Embedded Web Server (EWS). You can do so by entering the printers IP address (from the network configuration page) into your browsers address bar and pressing enter.
    Once there, press the "Network" tab at the top of the page. From there you will want to click the "IPv4" button, located on the lef-hand side of the page. It will be there for WIreless and Wired, so make sure to click the one for you however you are connected. If you do not see "IPv4", you should see "Networking", press that and then press "Network Address(IP)".
    Next, you will want to click the small round button next to "Manual IP Address" and then fill in the boxes for IP Address, Subnet Mask, and Default Gateway, using the information found on the network configuration page.  
    For the Primary or Preffered DNS Server, you will want to enter 8.8.8.8.
    For the Secondary or Alternate DNS Server, you will want to enter 8.8.4.4.
    Click apply and when the message pops up saying that the changes have been applied, press "OK". 
    Press the power button on your printer, wait for it to fully power off and then press it again to power it back on.
    After doing this, go ahead and try to enable ePrint again.
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
    This question was solved.
    View Solution.

    The reason we recommend using 8.8.8.8 and 8.8.4.4 for the DNS server is because they work when ISP assigned DNS servers do not. The DNS server assigned to you by your ISP is not able to resolve the domain for web services, therefore not allowing the printer to connect. 
    I assure you that it is with your ISP's DNS server and not the printer. If you were to take the printer back to the store and get a replacement, you would have the same issue, unless you changed the DNS. Same goes for any of our web service enabled printers. 
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Maybe you are looking for

  • Airplay is constantly not working and connected to internet but not showing content

    This happens ALL the time.  So my apple tv airplay constantly goes out and doesnt work anymore.  I try my ipad, ipad mini, and iphone 6 and NONE work.   I then I have to reset my apple tv, but then it doesnt show any content.  It is connected to the

  • PDF through mail

    HI, I need to send the pdf through email. for that i have used 'CONVERT_OTF_2_PDF' which converts into PDF. Now how to send this through mail.

  • All values in hierarchy

    my hierarchy is like this: 1. product1    1.1 state 1    1.2 state 2    1.n state n 2. product 2    2.1 state 1    2.2 state 2    2.n state n But in my report i wanna display only some states...not all states, like: 1. Product 1    1.1 State 5 2. Pro

  • Cannot get acrobat to autodetect text fields and check boxes

    I am attempting to take an existing pdf document (life insurance application) and turn it into a fillable form that I can use interactively to complete and sign on screen instead of having to print and fill out by hand.  The document has multiple pag

  • Installing previous version of Safari

    I am running Safari 5.1 on Snow Leopard and would like to go back to the previous version of Safari (5.0.5?). How can I do that? Thanks.