When trying to access itunes it tells me that it is a invaled destination address, when trying to access itunes it tells me that it is a invalid destination address, when trying to access itunes it tells me that it is a invalid destination address

When tying to use the app store it takes me to itunes and will not let me access due to a "invalid destination address."

- Try a reset. It cures many ills and nothing is lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Try going to Settings>Store and sign out of your account and then sign back in
- You access it through your computer?
- Try powering off and then back on your router.

Similar Messages

Why when i have been trying to down load apps it come up that i have a invaled address

my iphone wont download apps the past few days it says I have an invaled home address I check it and it all looks good

You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS. You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
http://kb2.adobe.com/cps/909/cpsid_90906.html
and also that you follow the instructions closely, such as closing ALL applications (including Safari) first before installing. You must also carry out a permission repair after installing anything from Adobe.
After installing Flash Player, reboot your Mac and relaunch Safari, then in Safari Preferences/Security enable ‘Allow Plugins’. If you are running 10.6.8 or later:
When you have installed the latest version of Flash, relaunch Safari and test.
If you're getting a "blocked plug-in" error, then in System Preferences… ▹ Flash Player ▹ Advanced
click Check Now. Quit and relaunch your browser, but check this also:
http://support.apple.com/kb/HT5655?viewlocale=en_US&locale=en_US which also covers ‘blocked plug-in’.

Allow internet user see my private lan

I have a mailserver with invali ip address
we have also some Valid ip address
how can I use nat to see this server form internet?

Dear Ehsan
Below is the config I have been doing:It is basically a LAB setup in which I have public IPs 192.168.1.0/24 and private IPs 192.168.2.0/24.Now I am giving 192.168.1.165/24 on one ethernet and 192.168.2.1/24 on another ethernet.I have kept a webserver (a Ip camera with a web server..to be precise), which is given a IP 192.168.2.200/24. Now from pool 192.168.1.0 (My PC ip is 192.168.1.75/24) I give 192.168.1.165 in my web browser, and I get access to my network camera.
version 12.3
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname Router
boot-start-marker
boot-end-marker
enable secret 5 $1$up5a$RW41pVnG8M8PfsKSZFgc0.
username cisco password 0 cisco
no network-clock-participate slot 1
no network-clock-participate wic 0
no aaa new-model
ip subnet-zero
ip cef
no ftp-server write-enable
interface FastEthernet0/0
ip address 192.168.1.165 255.255.255.0
ip nat outside
duplex auto
speed auto
interface FastEthernet0/1
ip address 192.168.2.1 255.255.255.0
ip nat inside
duplex auto
speed auto
ip nat pool test 192.168.1.165 192.168.1.165 netmask 255.255.255.0
ip nat inside source list 1 pool test overload
ip nat inside source static 192.168.2.200 192.168.1.165
ip classless
ip route 0.0.0.0 0.0.0.0 192.168.1.254
ip http server
access-list 1 permit 192.168.2.0 0.0.0.255
line con 0
line aux 0
line vty 0 4
login local
line vty 5 15
login local
end
Router#sh ip nat translations
Pro Inside global Inside local Outside local Outside global
tcp 192.168.1.165:80 192.168.2.200:80 192.168.1.75:1197 192.168.1.75:1197
tcp 192.168.1.165:80 192.168.2.200:80 192.168.1.75:1200 192.168.1.75:1200
tcp 192.168.1.165:80 192.168.2.200:80 192.168.1.75:1201 192.168.1.75:1201
tcp 192.168.1.165:80 192.168.2.200:80 192.168.1.75:1202 192.168.1.75:1202
tcp 192.168.1.165:80 192.168.2.200:80 192.168.1.75:1203 192.168.1.75:1203
tcp 192.168.1.165:80 192.168.2.200:80 192.168.1.75:1204 192.168.1.75:1204
--- 192.168.1.165 192.168.2.200 --- ---
There may be some issue with your mail server.
Regards
JD

Error message when installing iTunes on my PC: This installation package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows installer package

Error message when trying to install iTunes on my Pc:
Using Windows 7, had to replace hard drive. HELP!!
This installation package could not be
opened. Verify that the package exists
and that you can access it, or contact
the application vendor to verify that
this is a valid Windows installer package

Hello JAH1961,
I recommend following the steps in the article below when getting an error message trying to install iTunes:
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Thank you for using Apple Support Communities.
Best,
Sheila M.

I moved itunes file to external hard drive and want to move the file on my pc to recycle bin. When I move i get an error message that it cannot delete ituneshelper.dll access is denied. Can I move that file to the recycle bin?

I am trying to free up space on my pc and moving itunes files to external hard drive. I have followed instructions and believe I have file copied to new drive, but I am having trouble moving file to recycle bin as the instructions say. I am getting the following error message: cannot delete ituneshelper.dll:access denied, make sure disk is not full or write protected and file not in use. I know the file is not in use when trying to move. Any help would be most appreciated. I am on Windows XP.

Yes. And you should not have moved that folder. Put it back. To move your iTunes library move the folder from User's Music.
tt2

HT4913 If the music library on my iPhone will be deleted when I enable iTunes Match, does that mean that I will not be able to access that music library when I temporarily turn off iTunes Match on the iPhone, e.g., when on the subway & can't connect to Ma

I have subscribed to iTunes Match and have employed it to listen to music on my Macbook Air and iMac. On these devices it seems to operate by streaming music to the device rather than deleting the device's current iTunes library and downloading songs as they are played from iTunes Match. Not so on the iPhone as far as I can tell. Consequently, to date I have not activated iTunes Match on my iPhone 4S. I presently have 40-50GB's of music on my iPhone, sync'd from my iTunes music library on my Macbook Air. I am concerned that if I enable iTunes Match on my iPhone I will lose the music library already on my iPhone, as Apple seems to be representing that once iTunes Match is enabled on the iPhone the current music library, carefully compiled, will be gone from the iPhone forever (unless I later re-sync it from the iTunes library on my laptop), that it will be deleted. Although this would free up a lot of space on my iPhone, I bought the 64GB phone just so that I could keep a lot of music on it and accessible at all times. I am concerned that in certain instances, say if I am in the subway and want to listen to music on my iPhone but don't have internet access below ground, that I won't have much music to listen to, only those songs previously played and thus downloaded onto the phone from iMatch, presenting me witrh a rather limited choice of music to play instead of the 40-50GB's I now have to choose from. Apple seems to have presented me with the choice of the lesser of 2 evils: i) enable iTunes Match and lose the music library already on the iPhone in exchange for access to iTunes Match and a greater number of songs than I can fit onto the phone (my library exceeds the phone's capacity) when a Cloud connection is available or ii) don't enable iTunes match and limit myself to only those songs, a considerable portion of my library to be sure but not all of it, that I can fit in the phone's storage space, i.e., the 40-50 GB's I have on there now. If I choose the latter course, each time I purchase an album I'll have to delete another album to make room for it on the phone. Apple thus offers me a sort of Hobson's choice, bad all the way around. Do I have this right? The Apple techs I've spoken to don't seem to have a handle on the "deletion" aspect of enabling iTunes Match on the iPhone. Right now, I'm too scared of "losing" my iPhone music library to enable iTunes Match on the iPhone. [Possible work-around, albeit a pain in the ***: I suppose that I can enable iTunes Match on the iPhone and spend the next couple of weeks 24/7 downloading songs from my iTunes Match library back onto the phone to replace at least some of those deleted when Match was enabled, thereby rebuilding a proxy library on the phone itself to play when I'm stuck in a tunnel between Brooklyn and Manhattan while maintaining access to thee larger iTunes Match library, more music than my phone will hold, once we come back into the light and my Cloud connection is restored.] Comments, suggestions will be appreciated. Thank you.

See Recover your iTunes library from your iPod or iOS device.
tt2

When i try to instal itunes on pc i get this message. This installation pack could not be opened. Verify that package exists and that you can access it or contact application vendor to verify that this is a valid windows installation pack. HELP

when i try to instal itunes on pc i get this message. This installation pack could not be opened. Verify that package exists and that you can access it or contact application vendor to verify that this is a valid windows installation pack. PLEASE HELP

Hello annesmith1954,
Thank you for using Apple Support Communities.
You can use the information in the following article to troubleshoot your installation issues with installing iTunes on your PC.
"Could not open key" message when installing iTunes or Apple components for Windows
Regards,
Jeff D.

What did I do wrong? I used to have iTunes installed on this computer and lost it when it crashed. No I can't get past a certain point in the installation point. I keep getting an error message stating that I need to verify that I have access to this file

Help!! What's going wrong here. I used to have iTunes installed on this computer but lost it when it crashed. I've tried re-installing it numerous times but I keep getting the same error message. "Error writing to file: C:\ProgramFiles\iTunes.Resources\es.lproj\iPadLicense.rtf. Verify that you have access to that directory." I know I have access to that directory because on a different computer I can sync my iPad and iPhone. What am I doing wrong? What do I need to go in and authorize or turn on? Any help greatly appreciated. Thank you.

That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

When I try to access the itunes store I get an error message that my computer is not connected to the internet, even though it is. How do I fix this? Thanks.

For some reason when I open iTunes, and try to access the itunes store, help, my account, or anything else I get a message saying that I'm not connected to the internet, even when I know that I am. What's wrong?

Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

When i try to install iTunes onto my new computer, it says ""installation pkg could not be opened. Verify that this pkg exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer pkg."

When I try to install iTunes onto my new computer, it says "This installation package could not be opened. Verify that this package exists and that you can access it or contact the application vendor to verify to verify that this is a valid Windows Installer package." I can save iTunes onto my computer, but when I click run, this is the message that appears. How do I get this thing installed?

Hello annesmith1954,
Thank you for using Apple Support Communities.
You can use the information in the following article to troubleshoot your installation issues with installing iTunes on your PC.
"Could not open key" message when installing iTunes or Apple components for Windows
Regards,
Jeff D.

I want to take remote access from an iTunes library off of my iPad ...when I hit edit from the remote app it pulls that library up ..if I delete it I just want to make sure that I'm not remotely wiping out the library, just access to it from my iPad ?

I want to take remote access from an iTunes library off of my iPad ...when I hit edit from the remote app it pulls that library up ..if I delete it I just want to make sure that I'm not remotely wiping out the library, just access to it from my iPad ?

Call the apple store you got it from and ask them. Sometimes in the past they've extended the 'no questions asked return' but only Apple can tell you for sure.

Hello when i try to down load itunes if says "This installation package can not be opened. Verify that the package exist and that can access it. or contact provider" what do i do LOST

ello when i try to down load itunes if says "This installation package can not be opened. Verify that the package exist and that can access it. or contact provider" what do i do LOST

Hi MrJavonte15,
If you are having issues installing iTunes on your Windows machine, you may want to take a look at the following article:
Apple Support: Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
If you have previously installed iTunes and continue to have issues, you may want to remove and reinstall iTunes:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
http://support.apple.com/kb/ht1925
Cheers,
- Brenden

I have an ipod 2nd gen that was synced to a computer that i no longer have access to..now when i plug it in to my current computer itunes wants to delete all my songs!!!!!

I have a ipod 2nd gen that was synced to a computer that i no longer have access to...now when i plug it in to my new computer it shows the ipod but wants to erase all my music on the ipod in order to use itunes!!!

I think that's the way it's supposed to work. When you connect to a computer that has iTunes, but is different from the computer you are normally synced to, you are asked if you want to sync to the current computer. If you say yes, it will replace the content of your iPod with what is designated to sync in the iTunes. If you say no, it will leave your content alone, but you won't be able to load any new songs, but you can still use it in disk mode as a storage device.
The exception is that you can transfer your iTunes store purchases to the new computer from the iPod, but I haven't done that myself. I'm not sure, but I don't think you can transfer non-store tracks, like those you burn from your own CDs. You have to copy those manually and then sync them onto the iPod.
Anyway, that's how it works with a 6th gen and the latest iTunes. Not sure if there is a limitation with 2nd gen.

When downloading the new 10.7 update for itunes, an error message saying that there is an error writing to file, verify that you have access to this file comes up... what is this??

When downloading the new 10.7 update for itunes, an error message saying that there is an error writing to file, verify that you have access to this file comes up... what is this??

That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

HT4623 When I access iTunes, it syncs my iPhone to the mac pc, but after syncing, I cannot find the drop down that says "devices" so that I can check details about backups. How do I get to the window that says "devices"? thank you!

When my iphone5 is connected to my mac pc by the usb cable, the phone syncs with my mac pc. However, after it is finished syncing, I do not know how to access the window in itunes that has the option "devices". I obviously, am a newbie and would appreciate any help. Thank you!

When connected your phone should be listed on the top right. Click it without clicking the eject icon.
- or -
You can show the side bar where it will be listed under devices:
Mac: OPTION+COMMAND+S
PC: CTRL+S

When trying to access itunes it tells me that it is a invaled destination address, when trying to access itunes it tells me that it is a invalid destination address, when trying to access itunes it tells me that it is a invalid destination address

Similar Messages

Maybe you are looking for