When trying to add album info, it crashes and closes.

This problem popped up after intalling 10.5. I've tried to run a fix, but it doesn't change anything. Any suggestions? It's frustrating, as I'm a huge audiobook listener and I can't transfer the disks to iTunes to then transfer to my nano. Thank you!

Nobody can tell you anything without proper system info or other technical details.
Mylenium

Similar Messages

  • Script Error report when trying to "Find Album Info" for music in Windows Media Player

    When I click on "Find Album Info" in Windows Media Player, it finds the correct media info. But when I click "Finish" after verifying everything is correct, it says "An error has occurred on this script page" and asks if I want to continue. I click
    yes, it goes back to the last page of finding album info, I again click "Finish" to find the same "Script error" page?

    Sir, that means the Windows Firewall Blocked the Script So try these steps hope it works for you :
    1.) - Open the "Start Menu".
    2.) - Go to the "Control Panel".
    3.) - Double click "Security Center".
    4.) - Click "Windows Firewall" in the top left.
    5.) - Click "Change settings".
    6.) - Click "Continue".
    7.) - Click the "Exceptions" tab.
    8.) - Scroll down and check all of the "Windows Media Player" options.
    Regards,
    MCP | MCTS | MCITP

  • Skipping songs when trying to add album art

    Hello,
    I have a 60gb video ipod and am having a problem recently. Everytime I rip a CD onto itunes I have to add the artwork manually and when I do this, the songs (on only the new CD) on iTunes skip during the beginning 10 seconds of every song. As well, iTunes shows that it is downloading the album art, but it doesn't add anything.
    Can anyone please help.
    Thanks very much.

    Really Weird,
    Numbering is fine now but when I attempt to add artwork, it doesn't allow it and puts skips int the beginning of every song. This is not just when I play the song in iTunes but it actually writes the skip onto the song so that no matter what player I use, it skips. This is now obviously an iTunes problem, not iPod but any help would be great.

  • Error -50 when trying to add album art.

    The only reason these is really peeving me because I literally spent around 5 hours putting album art to the 450+ albums on my iPod. This is what I did.
    Because my friend advised me that syncing with the library is bad and the fact that i'm a super organization freak I added the album art directly to the tracks under iPod as opposed to editing the tags from my library and syncing. I figured since ID3 tags can be made straight to the tracks on the iPod, I could add the artwork. Turns out after I added all the artwork and through iTunes I could view it, they weren't showing up on my iPod, which is problem number one.
    Half of my albums already had the artwork. I saw an option in iPod option under iPod>>Music to display artwork. I unchecked it, it said it was deleting artwork from iPod. I rechecked it, and it said it was optimizing, and the bar SLOWLY filled, about a minute in it gives me error -50 "The iPod cannot be updated" anybody know whats going on?

    This usually indicates an input/output error.  Sounds like some data corruption where your printer drivers are installed.  See my FAQ*:
    http://www.macmaps.com/printersx.html
    * Links to my pages may give me compensation.

  • Getting error message when trying to add apple id to facetime and imessage, getting error message when trying to add apple id to facetime and imessage

    When I try to add my Apple ID to Facetime or iMessage, I get an error message "username or password is incorrect " even though its the same username and password I use for everything else.
    anyone else getting this problem?

    The Order has got 5 lines. First 4 lines are product lines and the 5th line is a service.
    We have a customized form called mass order change which will bring only the product lines when we query a order. We usually do the mass update of shceduling date
    and promise date in that form for all the order lines or for some perticular lines in that order.
    For one order when i tried to update the scheduling date and promise date its showing this message. Not sure why??.. i have checked the form logic and the package which this form is using but all of them are calling the standard API process_order to change the sales order. I found out that This message is a standard Oracle message : OE_SCH_OVER_ATP_NO_SCH_ACT. I tried to find this message in process_order API but could'nt find this message. status of these 4 lines are : Awaiting Shipping
    Thanks and Regards,
    Ragni Gupta
    Edited by: 921176 on Jan 21, 2013 5:17 AM

  • When trying to upgrade to FF6 it crashes, and I have to delete and reinstall 5.1? what is happening?

    FF crashes when I try to upgrade to FF6 and a dialogue box appears stating that a crash has occurred and please send report. When I do, I reboot only to have the same box appear. I then de-install the FF6 and reinstall 5.1 and all works again.

    Have you held the power button down for 10+ seconds?  That should turn it off.
    Ciao.

  • Labview crashes when trying to add CLIP

    When trying to add component level IP into Labview FPGA the program crashes (non-gracefully) when performing the check syntax.
    Steps to reproduce
    Load Project (Happens with a new unsaved project as well).
    Under FPGA Target (<Any Device>) -> Properties -> Component-Level IP
    Select Create File
    Add any VHDL file (also used the DemoClipAdder.vhd from the High-Throughput Example)
    Choose User-defined IP
    Check Syntax
    As syntax is being checked, the following appears in the log :
       Built simulation executable x.exe
       Fuse Memory Usage: 136412 KB
       Fuse CPU Usage: 468 ms
    Labview hangs for a couple of seconds then crashes
    Alternatively :
    Load Project (Or create a new project)
    Under FPGA Target (<Any Device>) -> New -> VI
    In Block Diagram, add IP Integration Block
    Save VI
    Double click IP Block
    Add Synthesis File -> DemoClipAdder.vhd
    Check Syntax (Completes successfully in this flow)
    Generate
    The following is produced in the log:
       Built simulation executable x.exe
       Fuse Memory Usage: 136668 KB
       Fuse CPU Usage: 421 ms
    Labview Hangs for a couple of seconds then Crashes
    I have tested this multiple times with multiple projects and FPGA devices with the same result every time.

    Hi ThatOtherGuy
    I have followed the steps to try to reproduce your problem but I have not been able to reproduce the error. I used this link to create the file and used notepad to create the file.
    The Check sintax is successful and I do not get any error.
    Have you try to do this in a different computer?
    Which operating system do you have?
    Which version of LabVIEW and drivers are you using?
    Regards
    Esteban R.

  • Error When Trying To Add Web Clipping

    Receiving the following error in the Apache error log when trying to add a webClipping portlet:
    [Sun Feb  1 08:17:25 2004] [info] [client 141.146.192.68] MOD_OC4J_0007: Oc4j process unique id:
    C_130.35.162.13.11a3ac.f52e368ff8.-8000#titsto_iasmt.auohsitst03.oracleoutsourcing.com#391727#OC4J_Portal#OC4J_Portal#default_island parsed from cookie of session request: /portalTools/webClipping/htdocs/wcstudio/jsp/toolbar.jsp does not match to oc4j instance with destination name: OC4J_Portal. Ignore this cookie.
    The error "WCS-102" shows up on the web - page while trying to add a webClipping portet.
    We have installed JPDK 9.0.2.6.2 over 9.0.2.6.1 and redeployed jpdk and portalTools. Note that the middle tier is a two node RAC.

    Sorry to resurrect this old topic - but was a solution found for this? I'm having the same problem.

  • -50 error when trying to get Album Artwork onto iPod

    Has anyone had the issue of getting an "unknown error" -50 when trying to sync Album Artwork? I have searched for a similar problem and have found nothing. The art work used to work on my old machine. I have recent change computers, but I moved all my music over to the new machine without any issues. Any insight would be helpful. Thanks.
    DP

    http://docs.info.apple.com/article.html?artnum=304996

  • I get error message when trying to add key tags

    I get error message when trying to add key tags

    You should always backup your iPad before ever doing anything major that coould result in a catastrophic loss is something goes wrong. You can then usually restore from the backup when your iPad has recovered.
    You should also be sure to have transfered any new purchases directly to your iPad to the iTunes app on your computer on a regular basis.

  • Error message when trying to add signature. An error has occurred that may be fixed by installing the latest version of the Japanese Language Support package.

    Error message when trying to add signature. An error has occurred that may be fixed by installing the latest version of the Japanese Language Support package.  How can I fix this?
    Thanks
    [email protected]

    What is your operating system?  Reader version?

  • When trying to add music to a slide show from my PC to TV through Apple Tv the photos are fine but I get an error message that says the music cannot be downloaded.

    When trying to add music to a slide show from my PC to TV through Apple Tv the photos are fine but I get an error message that says the music cannot be downloaded.

    Because the location for each song in your library is on your hard drive.  If the hard drive isn't there, how can iTunes play it?
    You'll have to move/copy the music from your hard drive to your computer's hard drive.
    Basically, EASIEST way to do all this, if you don't care about your play counts, etc...
    -Delete EVERYTHING from iTunes, so that your library is now empty.
    -Go to "Advanced" inside of the "Preferences" window, found in the "Edit" drop-down.  You can also access Preferences by pressing Ctrl+, (Press Ctrl and the comma key)
    -Change your iTunes Media Folder Location to something simple, but on your computer. I use C:/iTunes.  Make sure "Keep iTunes Media Folder Organized" and "Copy files to...." are both checked.  You can close Preferences now.
    -Now, drag and drop your music from your hard drive into your iTunes library.  iTunes will automatically add the music to your library, as you would expect, and also creates a copy of each file to place into that iTunes Media Folder you just created.
    Shouldn't have any more problems...

  • Error  message when trying to add new user

    Hello,
    Customer is working on 2005B (2005B 7.40.252 SP00 PL39).
    They are working on this database since 2009.
    No upgrade was recently done.
    when trying to add a new user they get athe following error:
    "A user was added outsite the application. Delet it, or preform'Restore Numbering' [Message 3512-7]"
    Could you please advice.
    Regards,
    Maya

    Hi Maya......
    Go to Administration--> Utility and select the restore no. series.
    Update this and try to add User.
    But do it first in your test DB.....
    Regards,
    Rahul

  • I continue to get an error message when trying to add Header

    I continue to get an error message when trying to add Header & Footer.  Therefore I am unable to add page numbers to my pdf.  Help!!

    Sounds like the PDF has an issue. You can try to save it, close, and reopen to see if that fixes it. If there are no tags or other markup, you could print it to a new PDF and try on the new file.

  • Class is not appearing in "Java Batch Job Class Search" when trying to add.

    Hi,
    I have oracle CC&B 2.3.1, with SDK 2.2.0.12. I am trying to create new java batch job class by copying an existing one and modifying it to be used with new Batch Control .
    Steps are as follows:
    1-Created file by copying the exiting file
    CreateLatePaymentChargesProcess.java ; and only changing the name of the class:
    public class CmCreateLatePaymentChargesProcess
    extends CmCreateLatePaymentChargesProcess_Gen
    File location :
    D:\spl\ccb231\applycm\ssgc_patch\java\source\cm\ CmCreateLatePaymentChargesProcess.java
    D:\spl\ccb231\applycm\ssgc_patch\java\source\cm\ CmCreateLatePaymentChargesProcess_Gen.java
    2-Run ApplyCm build successfully , which generated these files:
    D:\spl\ccb231\java\target\cm\com\splwg\ccb\domain\billing\batch\ CmCreateLatePaymentChargesProcess.class
    D:\spl\ccb231\java\target\cm\com\splwg\ccb\domain\billing\batch\ CmCreateLatePaymentChargesProcess_Gen$1.class
    D:\spl\ccb231\java\target\cm\com\splwg\ccb\domain\billing\batch\CmCreateLatePaymentChargesProcess_Gen$CmCreateLatePaymentChargesProcessWorker_Gen$ThreadParameters.class
    D:\spl\ccb231\java\target\cm\com\splwg\ccb\domain\billing\batch\CmCreateLatePaymentChargesProcess_Gen$CmCreateLatePaymentChargesProcessWorker_Gen$ToDoProperties.class
    D:\spl\ccb231\java\target\cm\com\splwg\ccb\domain\billing\batch\CmCreateLatePaymentChargesProcess_Gen$CmCreateLatePaymentChargesProcessWorker_Gen.class
    D:\spl\ccb231\java\target\cm\com\splwg\ccb\domain\billing\batch\CmCreateLatePaymentChargesProcess_Gen$JobParameters.class
    D:\spl\ccb231\java\target\cm\com\splwg\ccb\domain\billing\batch\CmCreateLatePaymentChargesProcess_Gen.class
    All the above classes are part of CM.jar file
    ContextManagedObjects.xml ;  contains these information
    <com.splwg.shared.environ.ContextManagedObjectData>;
    <domainPackages/>
    <lookupFieldClasses class="tree-map">
    <no-comparator/>
    </lookupFieldClasses>
    <cobolAlgorithmInterfaceExtensions class="tree-map">
    <no-comparator/>
    </cobolAlgorithmInterfaceExtensions>
    </com.splwg.shared.environ.ContextManagedObjectData>;
    packageMetaInfo.xml was not created
    Still the class is not appearing in "Java Batch Job Class Search" when trying to add a new program name referencing this java class.
    I tried restarting the Tomcat application server, still not appearing.
    Where did I go wrong about it?
    Thanks
    Edited by: cc&amp;amp;amp;b-user on Jul 29, 2011 12:39 AM
    Edited by: ccb-user on Aug 2, 2011 9:28 PM
    Edited by: ccb-user on Aug 7, 2011 11:36 PM

    Hi,
    Did you copying the base file CreateLatePaymentChargesProcess.java?
    I also create a new batch job which copying the CreateLatePaymentChargesProcess batch code the only difference in getBills() method query and inner class CreateLatePaymentChargesProcessWorker extend CmCreateLatePaymentChargesProcessWorker_Gen, instead of CreateLatePaymentChargesProcessWorker_Gen.
    The batch is working fine in my end.
    Thanks,
    Atul Singh.

Maybe you are looking for