When trying to load the the Seatle Times Crossword, it says "This site uses Java. If Java is installed and you cannot view the puzzle, your browser settings may need changing."

only started after I installed Firefox 4. had no problems before. IE and Firefox 3, no problems.

It appears that you either do not have Java installed or that you have it disabled. To test to see if you have Java installed and enabled go to:
*http://www.java.com/en/download/testjava.jsp
*Also see: http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates
Also, do you see Java in the Windows Control Panel? If not, it is not installed on your system. See:
*http://windows.microsoft.com/en-US/windows7/Working-with-Control-Panel
'''Install or Update the [[Java]] plugin''' to the latest version.
*Download site: http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)
**'''''Be sure to <u>un-check the Yahoo Toolbar</u> option during the install if you do not want it installed.
*Also see "Manual Update" in this article to update from the Java Control Panel in Windows Control Panel: http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates
* Removing old versions (if needed): http://www.java.com/en/download/faq/remove_olderversions.xml
* Remove multiple Java Console extensions (if needed): http://kb.mozillazine.org/Firefox_:_FAQs_:_Install_Java#Multiple_Java_Console_extensions
*Java Test: http://www.java.com/en/download/help/testvm.xml

Similar Messages

LabView hangs when trying to load the same VI with a different user logged onto Win2k

When 'User A' is logged onto Win2k, a particular VI loads and runs fine. When 'User B' logs onto the same Win2k box, LabView hangs when trying to load the VI.
I'm also not seeing the setup channels in the Data Neighborhood in MAX when logged on as 'User B'. I tried loading the configuration when logged on as 'User B' that I think is being used for 'User A', but nothing happens.
Where are the configuration files (of whatever type) that tell LabView which user is logged on?
Thank you!

There are no configuration files that tells LabVIEW what users are logged on. It is Win2K permissions settings that allow different users access to different folders and applications. Try changing the permissions for the LabVIEW folder and see if that doesn't fix your problem.

HT1296 When i attempt to sync my iphone it continues to say this computer is no longer authorized for apps and they will be deleted?? I don't understand?? I put my password and authorize but same message comes up. What to do??

When i attempt to sync my iphone it continues to say this computer is no longer authorized for apps and they will be deleted?? I don't understand?? I put my password and authorize but same message comes up. What to do??

I found the solution in another post. By deleting all my apps, I was able to sync the phone. I hope I don't have to delete all my apps every time I want to sync my phone, but at least now I am able to sync my phone.

Trashed plists to fix the problem 'Your network settings have been changed

What is the easiest way to get back the plists that I trashed when following advice on how to fix :Your network settings have been changed.

Drag them out of the trash and put them back to the place from which you dragged them to the trash. If you emptied the the trash they are basically gone (unless you want to go to the excessive step of file recovery with $100 software and a spare empty drive). By the way, they are automatically created again with default settings when you invoke features that need them so it's not like you have a hole in your computer file collection.

My elements 12 stopped working when trying to load the editor. Windows 7 shuts the progam downw

When I try to launch the editor the progam says it stopped working. It displays message that windows 7 will find the solution and then comes back and says there are no solutions. I have removed and reloaded it, checked for compatibility and many of the actions that describe this in the forum.. Where is the Patch to make this work?

From the Premiere Elements Information FAQ http://forums.adobe.com/thread/1042180
•What operating system? This should include specific minor version numbers, like "Mac OSX v10.6.8"---not just "Mac".
•Have you installed any recent program or OS updates? (If not, you should. They fix a lot of problems.)
•What kind(s) of image file(s)? When talking about camera raw files, include the model of camera.
•If you are getting error message(s), what is the full text of the error message(s)?
•What were you doing when the problem occurred?
•What other software are you running?
•Tell us about your computer hardware. How much RAM is installed? How much free space is on your system (C:) drive?
•Has this ever worked before? If so, do you recall any changes you made to Premiere Elements, such as adding Plug-ins, brushes, etc.? Did you make any changes to your system, such as updating hardware, printers or drivers; or installing/uninstalling any programs?
And some other questions...
•What are you editing, and does your video have a red line over it BEFORE you do any work?
•Have you viewed the tutorial links at http://forums.adobe.com/thread/1275830 page?
•Which version of Quicktime do you have installed?
What is your exact brand/model graphics adapter (ATI or nVidia or ???)
What is your exact graphics adapter driver version?
Have you gone to the vendor web site to check for a newer driver?
For Windows, do NOT rely on Windows Update to have current driver information
-you need to go direct to the vendor web site and check updates for yourself
ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us
IF you have a laptop with dual graphics, read below... otherwise, ignore this part
Dual video problems (some for Premiere Pro, but the idea is the same)
-http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modules.html
-http://forums.adobe.com/thread/1001579
-Use BIOS http://forums.adobe.com/thread/1019004?tstart=0
-link to why http://forums.adobe.com/message/4685328
-http://www.anandtech.com/show/4839/mobile-gpu-faceoff-amd-dynamic-switchable-graphics-vs-n vidia-optimus-technology/2

HT2558 I am trying to upload software but each time I am asked to upload a box pops up with install and restart. I press this, the computer restarts and I start all over again. No authentication icon appears.

I am trying to update software on my macbook pro. From the apple menu, I click "check updates", software is then checked and a list presented of software that I require downloading. I then tick the relevant applications. The blue bar with "install and restart" appears, I press this, the computer goes into restart mode, I login and start all over again.
i seem to be in a loop! No authentical dialogue box appears for me to enter my name and password.
Any suggestions please!

Hi, try a refresh that'll bypass the cache with the Shift key + F5 (or Shift-click on reload) which is the same as clearing your browser cache (Ctrl+F5 for the Internet Exploder). If that doesn't work, then you can try a new firefox [https://support.mozilla.com/en-US/kb/Profiles profile] just to see if it's (your) Firefox-related or maybe an actual problem with the site (maybe starting Firefox in [[Safe Mode]] can be a quicker check).

I'm getting "an error occurred loading this content" when trying to airplay youtube from my iPhone 5. My brother is using his iPhone 4s with no problem. Is there something wrong with my settings?

I'm trying to airplay youtube from my iPhone 5 but I'm getting the error message. I can airplay music, pictures, and other video, but no streaming. My brother is using my appletv and wi-fi with his iphone 4s with no problems. Any suggestions?

I started having this problem a week or so ago, after having used the Apple TV for a couple of months with only some minor problems. Yesterday, however, I started getting this problem again and today I could not get to Airplay from my Ipad - just kept getting the "error occurred" message on my tv screen. I tried the various fixes I could find on Google - at least the ones I could understand - but with no luck. Then I decided to bite the bullet and pay for Apple support, even tho the problem is with the device and not due to my ignorance. So I talked with a support person who said I would have to pay $19.95 for 30 days of support and was glad to take my credit card information. This person had never heard of the problem, and ending up bumping me up to an Apple TV specialist, after spending 20 minutes or so on hold, and explaining the problem, etc. I finally got to the specialist who had heard of this problem and said that she was crediting me for the $19.95, since the problem is due to a KNOWN HARDWARE ERROR. In fact, she said that Apple would give me a new, replacement unit if I would go to the nearest Apple store. This even tho I bought the unit used - it is still covered. Now I have to make a 100 mile round trip to the Apple store, since Apple won't send the new one out in the mail, even if I return mine first. And Apple won't pay for my gas. So that's the mostly good and some bad news. I hope that the new unit won't have this problem, but I think the bigger issue is that since Apple knew about the problem that affects certain serial numbers, why don't they post that information on their support sites or just make it findable by a Google search. Whenever I have had a problem with Windows, I have always been able to find a Microsoft article or fix addressing it by doing a Google search, but Apple, always desiring to be arcane and opaque, isn't interested in this approach. In fact, why not just put together a "known problems" site for Apple products so that users can find this kind of information easily, without having to put out $19.95 for technical support that isn't needed, and wasting their own time (and money, as in my case, for gas). The bottom line is that all of the people with this problem who posted (and there are many) were apparently ignorant that Apple KNEW ABOUT THE PROBLEM AND WILL REPLACE THE BAD UNITS. This is because, I am sure, they don't want to shell out the $19.95. Anyway, hope this helps someone. I doubt if Apple will listen to the suggestion. Good luck..

I get aq run time error when trying to load the latest version of iTunes. Help.

I get a run time error when attempting to install the latest version of iTunes & now cannot access iTunes. Can anyone help me?

Hi jalbany,
Thanks for using Apple Support Communities. This article has steps you can take for the error you're seeing:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Ari

"Invalid file name" error when trying to load the report in IIS/CR 2008

We have deployed our application to many installations with no problem however in one particular case we get this error whenever we try to load any reports in our web app.
I made sure that the DefaulAppPool user (Network Service) has read+excute on all folders as well as the IIS anonymous user.
The anonnymous access is off but Windows Integrated Security is on.
ASP.NET Version:2.0.50727.3082
Web.config is healthy and is listed below.
Other pages in the application which are not depenent on C.R load and run perfectly.
I don't know what else to check
thanks for you help
jeff
Web.Config Entries related to CR ***********
<compilation debug="true">
<assemblies>
<add assembly="CrystalDecisions.Web, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
<add assembly="CrystalDecisions.Shared, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
<add assembly="CrystalDecisions.ReportSource, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
<add assembly="CrystalDecisions.Enterprise.Framework, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
<add assembly="CrystalDecisions.Enterprise.Desktop.Report, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
<add assembly="CrystalDecisions.ReportAppServer.Controllers, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
<add assembly="CrystalDecisions.CrystalReports.Engine, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
<add assembly="CrystalDecisions.Enterprise.InfoStore, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
<add assembly="CrystalDecisions.Enterprise.Viewing.ReportSource, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
<add assembly="CrystalDecisions.ReportAppServer.ClientDoc, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/>
</assemblies>
<buildProviders>
<add extension=".rpt" type="CrystalDecisions.Web.Compilation.RptBuildProvider, CrystalDecisions.Web, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/></buildProviders>
</compilation>
ERROR DETAILS *****************
[COMException (0x800001fb): Invalid file name.]
   CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options) +0
   CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options) +95
   CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() +356
[CrystalReportsException: Load report failed.]
   CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() +418
   CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.get_ProductLocaleID() +31
   CrystalDecisions.ReportSource.CachedObjectReportSource.GetReport(RequestContext context, Boolean bAddToCacheWhenCreated) +474
   CrystalDecisions.ReportSource.CachedObjectReportSource.InternalGetReport(RequestContext context, Boolean bAddToCacheWhenCreated) +15
   CrystalDecisions.Web.CrystalReportSource.get_ReportDocument() +184
   CrystalReportPageTemplate.OnInit(EventArgs e) in

I got a procmon log file and examined it. I have the file and I could also provide you with that or screenshots of it.
There is nothing unusual about it. I can see entires in which CR has successfully opened the report and has cached in a c:\windows\temp.
However there is one or two non-successful entries that may be related, especially that examining the stack trace brings us to a call to get_ProductLocaleID():
- A call to read reg entry HKU\S-1-5-20\Software\Business Objects\Suite 12.0\Crystal Reports\Locale fails with NAME NOT FOUND.
- immediately after that and from the same process (w3wp.ex) there is a call to open directory "c:\" which is logged as ACCESS DENIED.
Any subsequent unsuccessful calls seem to be results of exception handling in the debug code.
Does this point to any setup issues with CR? We always run the redistributable x86 runtime when installing it.

HT5957 Getting an error message when trying to load the update iso7.0.2 on my ipad2...any help out there

Tried turning ipad2 off and on, still getting error on loading ISO 7.0.2 update

Message reads : software update failed. An error occurred downloading iOS 7.0.2.
I'm giving to choices: CLOSE. or. SETTINGS.
Either choice takes back to - Download the update

My firefox crashes when trying to load the game "runescape"

When i click the game it just crashes firefox,and the crash dialog or nothing comes up. I've Also tryed goign to downlaod Java,but everytiem it go's to the page to download it,it crashes.

I got the same issue on a laptop i use for work,
Running Windows XP®Proffesional Server pack 3 on it
with 2.4 GHz
2 GB RAM
with enough space on my hard disc
in other words i have all the requirements to run Java
I think it's a security issue on our virus scanner/firewall, that can't connect firefox and java :S
Not sure though, if anyone has a solution pleeeaase write it here :)

Present version is 3.0.3 downloaded 3.6.13. When trying to load the upgrade received error message -- "The operation cannot be completed because you do not have sufficient privilages for some items." --What is the solution to this ?

The computer is
Model Name: MacBook Pro
Model Identifier: MacBookPro4,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 3 MB
Memory: 2 GB
Bus Speed: 800 MHz

* Download a new copy of the Firefox program: http://www.mozilla.com/firefox/all.html
* Trash the current Firefox application to do a clean (re)install.
* Install the new version that you have downloaded.
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

I receive a website interuppted when trying to load the site I'm trying to open

I am attempting to connect to a link from a school website. I receive a "connection was interrupted" after clicking on the link I want. I cannot enter into the email, blackboard or moodle links. Other links work and I have no problem with them. I've attempted a few things from your site that where suggested to solve this problem but to no avail. Also, I am able to use the links with ease while in internet explorer.

Some added toolbar and anti-virus add-ons are known to cause
Firefox issues. '''Disable All of them.'''
Can you post a link to the site? '''No Personal Information Please.'''
'''http://kb.mozillazine.org/Error_loading_websites'''

Error: AN UNKNOWN ERROR HAS OCCURRED when trying to update the Picture Motion Browser (PMB) Portable software on an Apple Macintosh computer.

Solved!
Go to Solution.

When the camera is connected to an Apple Macintosh computer, a prompt appears that says an update is available for the PMB Portable software. Selecting to update the software later causes the application to not respond and display the unknown error has occurred message. The PMB Portable update is required to make it work with the computer.
Follow the steps below to resolve this issue.
IMPORTANT:
The computer must be connected to the Internet to complete the steps in this solution.
For the MHS-CM5 and MHS-PM5 bloggie cameras it is necessary to download and install a firmware update before installing the PMB Portable update. The firmware update is only required when installing the PMB Portable update and is available from the same page.
Select the option to Update Nowin the PMB Portable window.
Download and save the PMB Portable update PMBPMAC12_Upgrade1004a.dmgfor Mac.
After completely downloading the update, close the PMB Portable window. Make sure the application is closed by removing or ejecting the UNTITLED or NO NAME icon on the desktop. However, leave the PMBPORTABLE icon.
Close any other unnecessary applications that may be running on the computer.
Open the PMBPORTABLE icon on the desktop.
Drag the PMBP_Win.exefile to the trash.
NOTE: If PMBP_Win.exe file is locked and cannot be moved, unlock it by doing the following:
Select the file.
In the drop-down list, click Get Info.
In the General section, next to Locked, click to remove the check mark.
Empty the Trash to completely remove the PMB_Win.exefile.
Run the PMBPMAC12_Upgrade1004a.dmgto install the latest update.
Follow the on-screen instructions to complete the installation process.

"sCode=0xffffbc66: Description: Unknown variable or property name 'ReportStyle'. Error accessing item 'ReportStyle' when trying to optn the ReportOptions in TestStand 4.0.

I get the error "sCode=0xffffbc66: Description: Unknown variable or property name 'ReportStyle'. Error accessing item 'ReportStyle'. when trying to load the ReportOptions in TestStand 4.0.
Has anyone seen this before? If so how can I get around it as I will need to disable Report Generation for this system.
Thank you

Hello,
I am not 100% sure how I resolved this issue as it was a few years ago. However, I have attached the TestStandModelReportOptions.ini file that I used - hope this helps you.
Attachments:
TestStandModelReportOptions.ini ‏5 KB

When trying to load the the Seatle Times Crossword, it says "This site uses Java. If Java is installed and you cannot view the puzzle, your browser settings may need changing."

Similar Messages

Maybe you are looking for