When trying to record result in co60 a pop up appear

Hi,
please help me with my problem a when trying to record a result in Co60 a pop up inspectin point appear asking for what identification . how can i remove the pop up and why there is a pop up?
please help me solve my problem.
Your help is highly appreciated.
thanks.thanks

Sounds like you accidently de-selected "Software Monitoring"
and/or
If you don't know what a function does... in this case, "Low Latency Mode" don't enable it. I suggest consulting the manual and read up on Low Latency Mode... it could even be causing the problem you describe depending on what plugins are being used.

Similar Messages

I keep getting an error message saying, "cannot record" when trying to record over a slide in my presentation. No idea why. Any suggestions? Thanks

I keep getting an error message saying, "cannot record" when trying to record over a slide in my presentation. No idea why. Any suggestions?
Thanks

email ituens at expresslane.apple.com and they will help you for nothing

Runtime Error 217 when trying to Record

I am using Captivate 4 on Windows XP. When I hit the Record button in Cap 4, a microphone icon displays and counts down 3-2-1, then runtime error 217 displays. Cap 4 then crashes.
I am not recording audio for this project. I am recording FMR and in Edit > Preferences > Full Motion Recording I have the Working Folder set to C:\Test.
Not sure why Cap 4 is doing this.
Can anyone make any suggestions to help me?
Thank you.
Laraine

I deleted everything in the folder then restarted Captivate 4, but still
experiencing the same problem when trying to record.
*Laraine Hofmann
Sr. Instructional Designer
804-444-7365 (T)
501 South 5th Street
Richmond, VA 23219
mwv.com
<http://www.mwv.com/

Nasty feedback when trying to record using the internal mic

I get nasty feedback when trying to record using the internal mic on my macbook. I'm running Maverick. Why is this happening?

Note: there may be other issues involved, but without further details I can only suggest that using headphones is the best way to accurately hear what you're recording, adjust gain levels, and avoid feedback. So this should be the first thing to try as you troubleshoot.

HT4623 when trying to restore my iphone error 2001 pops up. Will not get out of recovery mode

Battery got extremely hot one day while battery was 100%. When i noticed it was hot battery started draining really fast within 5 min it was dead. Hooked up to computer to charge but would not turn on. Itunes plug in screen pops up and iunes says needs to be restored, but when i try to restore it error 2001 keeps popping up. That was on a mac book, when trying to restore on pc error 21 pops up. Any ideas?

Maybe:
Restore loop (being prompted to restore again after a restore successfully completes)
Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
Next try placing in DFU mode and then restoring.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Then try restoring on another computer.
Last, make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

When trying to download an app, a message pops up and says "cannot download due to not enough memory". I have checked there seems to be enough memory on pc and ipod?

when trying to download an app, a message pops up and says "cannot download due to not enough memory". I have checked there seems to be enough memory on pc and ipod?

I followed the advice of another user, cleared my payment information and re-entered my credit card info and this took care of it, I was immediately able to download new purchases. Apparently they called and got this info from someone at Apple, there is some sort of "bug". worked for me...hope it helps you out too!!

Severe static when trying to record electric guitar

I've been trying to record a clean electric guitar and every recording is just covered in heavy hissing static sound. This didn't happen when I recorded an acoustic guitar through a microphone. I have an electric guitar going into a small amp, with the amp level set on the clean channel at a very low setting, then the headphone/output is running directly into my M-Audio FastTrack USB interface, which is connected to the computer. I have adjusted the "recording level" in garage band so that the signal never gets close to the red in the individual instrument track. The "output" knob on the FastTrack is set relatively low also, about "4" out of 10. When I play back the recorded track, the master level meter never goes into the red either. Yet no matter what volume I record at I'm getting this strong crackling/hissing as if it was extremely overdriven.
Related question: When I play on the electric guitar, is it supposed to show an indication in the LCD box, as it does when I'm playing on my midi controller? It doesn't have the little indicator light showing signal, nor does the master level indicator, when I'm recording. Only the individual track level indicator shows the signal coming in. Maybe this is normal...
Any help is greatly appreciated.

OK, well I solved my own problem through trial and error. Rant: I switched to GB from ProTools on the theory that GB was supposed to "just work" and I want to be a musician, not an audio engineer. Here is how I fixed the static: one of my garage band books told me I could set the Garage Band audio preferences to "System" default, and then set my computer's audio preferences to my audio interface for the ins and outs, because I wanted to play all of computer's audio, whether in garageband or not, through my reference studio monitors. Well doing it this way results in massive static when recording a real instrument, for no apparent reason. So to fix this, you have to set Garageband's own audio in/out settings to your audio interface, NOT to the system settings. This caused the static in my recordings to completely disappear. Go figure.

No sound or strange sounds when trying to record guitar

Hi!
I'm new to Logic Pro, after having worked with garageband for many years. I've just been trying to record guitar through my audio interface, with strange results. I've set my audio in and output source as my M-Audio firewire solo, created an audio track, and selected the guitar sound I want. At first there was no input, then when I deleted the first track and created a new one, I could hear the guitar through the monitor and it was being input, but it had a horrible distorted and out of tune sound - and that was how it sounded when I recorded it too. Then I tried it again and it seemed to be working fine for about 5 minutes - it sounded fine through the headphones and the recording was right - but then went back to the strange sounds again - without me changing anything!
I'm using Logic Pro 9.1.8, on a Macbook Pro running Mac OSX 10.8.3, and have a M-Audio Firewire Solo audio interface.
I'm very frustrated right now - so I'd be grateful for any help!
Thanks,
Stephen

Hi stephenhis,
If you are having issues with imput audio in Logic Pro, the first place to start would be with some basic isolation troubleshooting to see if the issue can be localized. That should provide a good basis for further troublshooting should the issue persist.
Logic Pro 8 and 9: Troubleshooting basics
http://support.apple.com/kb/HT2375
Regards,
- Brenden

?????? In the Transport Bar When Trying To Record.

Anyone know why question marks would show up when you push record? I'm there. I'm trying to bounce down my mix within Logic. I don't think think that the routing has anything to do with it but I'm sending my mix out stereo to analog channels and coming back in analog after by outboard gear. The problem is limited to this session, I've cracked open other logic sessions and they work fine.
-p

Have a look at your login crenditals in the Connection Pool.
Regards
John
http://obiee101.blogspot.com/

Simplescreenrecorder - error when trying to record to gif

I'm trying to record an area of my screen to gif.
Here is the error I get when I press "Start recording":
[PageRecord::StartOutput] Starting output ...
[Muxer::Init] Using format gif (GIF Animation).
[BaseEncoder::CreateCodec] Using codec libx264 (libx264 H.264 / AVC / MPEG-4 AVC / MPEG-4 part 10).
[Muxer::Start] Error: Can't write header!
[BaseEncoder::EncoderThread] Encoder thread started.
[BaseEncoder::Stop] Stopping encoder thread ...
[BaseEncoder::EncoderThread] Encoder thread stopped.
[PageRecord::StartOutput] Error: Something went wrong during initialization.
Container: other...
Container name: gif
Codec: H.264 (I tried all codecs with default values).
I did try x11grab, but I find it inconvenient to have to write down the mouse coordinates: I am unlikely to know exactly which values I want.

Hi H.Barker,
Zou is correct, LabVIEW supports all GIF bit depth images 24bit and below.
Thank you for forwarding the GIF images, I also experienced the same error when trying to import the "logo.gif" image in LabVIEW however I was able to import the image when I opened it in Microsoft Paint and resaved it as a new GIF.
This suggests there is a corruption in the original GIF file generated on the web, for example a "terminiating block" may be missing at the end of the GIF file. LabVIEW is not forgiving of GIF images that do not meet the GIF specification whereas other Windows editors may be, it seems that opening and resaving the GIF file in Microsoft Paint added the missing characters thus allowing for the file to be imported into LabVIEW.
I have attached the working GIF image to this post.
Hopefully this assists with your application H.Barker.
Many Thanks
Jamie S.
Applications Engineer
National Instruments
Attachments:
LOGO GIF (2).gif ‏34 KB

Garageband making loud double clicking sound when trying to record

Garageband makes a loud double clicking sound when I'm trying to record and then it won't let me play back what I've recorded. Please help. Thank you

Im having this problem too actually. I have to restart my MacBook Pro to make it go away...
Latest version of GarageBand. 10.6.1. All updates done.

When trying to access excel retrive,error is pop-up(Urgent)

Hi All,
when trying to access excel retrive,the below error is occured.
"An unkown error has occurred in the HsvExcelUI object"
Please let me know, why it happend.
Thanks you.

Hello,
I think ur Smartview is crashed. Please ask ur system engineer or whoever taking care of installation of smartview to check the smartview connection.
Generally u will get the pop up message if smartview crashes.
If anyone have other opinion than this please post here so that i can know.
Thanks..............

IMovie 8 Quits When Trying To Record Lengthy Movie Via iSight

For a sleep study, I am trying to use my MBP's iSight camera to record a night of me sleeping.
Each time I try to record using iMovie, the program quits unexpectedly after a few hours. A file of what was recorded is left in a temp file as a .mov file but cannot be opened by QuickTime. The same thing happens when I try to use Photo Booth as my video capture app; PB quits unexpectedly and the resulting .mov file cannot be opened.
My MBP has a 320GB hard drive with 80+ gigs free, so I wouldn't think this would be a problem. Screen savers and energy saver features are turned off.
Is there just a simple duration limit for record video in iMovie or Photo Booth?
Does anyone have suggestions for a fix, or another app that would help me capture 6-8 hours of continuous video via my built-in iSight camera?
Thanks.

Hello MrMcG
Regardless of whether you are recording in standard or high definition, it seems to me that you will need more disk space for real time (as differentiated from Time Lapse) recording.
As explained in http://docs.info.apple.com/article.html?path=iMovie/8.0/en/10331.html , 8 hours of video recording would require a minimum of (13b xb 8) = 104Gb free.
3. Choose the disk where you want to store the video from the Save To pop-up menu.
You can choose any supported hard disk that’s connected to your computer. It takes 13 gigabytes (GB) of space to store about one hour of video in standard (DV) format and 40 GB for video in high-definition format (HD), so make sure your disk has enough available storage space for the video you’re importing. The amount of free space on each available disk is shown in parentheses next to the disk’s name in the pop-up menu.
Moreover, OS X requires additional free space for its own operations. (I like to keep at least an additional 50Gb free for OS X headroom, but less may work for you.) Therefore, if you do not want to use Time Lapse photography, you will need to somehow find more disk space. Apple gives some alternatives in the "Making more disk space available" section of http://support.apple.com/kb/TA21009
EZ Jim
G5 DP 1.8GHz w/Mac OS X (10.5.7) PowerBook 1.67GHz (10.4.11) iBookSE 366MHz (10.3.9) External iSight

File Not Found error (-43) when trying to record

Never had this problem in the past, and haven't used Logic in a few months, but every time i attempt to record, i get that message: File Not Found, Result code error -43
I am using the MBox 2 Pro as my record in, and Logic 6.4.3
Thanks for the help...

Hi,
I have a 'file not found' problem with Logic Express. A while back I transferred all my Logic files to DVD to make room on the hard drive. It took 4 discs, saved alphabetically by song title. Now, I nearly always get the 'file-not'found' error message when I try to work on something. Sometimes when I click 'search' it finds the file, sometimes it doesn't. I'm confident that I didn't delete the files.
Wondering if 'search' would find the files if I transferred all the files from DVD to a single folder on an external drive. I don't use the 'search manually' option, because I'm not really sure what I'm looking for, or where to look. In the other room, perhaps? 'Computer challenged' is me. Any suggestions?
DS

Error message when trying to record video?

PowerMacG5
OS 10.5.6
QT 7.5.5
iSight camera
When I try to record a video using QT Pro I get the following error message:
Operation Could not be completed due to an unknown error.
(error Domain= NSOSStatusError Domain code= 1852797029
If I try to use iChat, iSight is working fine. After getting the error message in QTPro then iSight does not work anymore even in iChat....
I have to unplug iSight then plug it back in to get iChat video working again.
I deleted QT pref, no luck.
Any suggestions?
Thanks
Fred

after several hours of searching for and testing of lots of different video capture applications, i have finally found one. There were several that worked. But the one that was the best of the ones i tested was *EvoCam (http://www.evological.com/evocam.html)* I haven't used it for long but from what i have seen so far it works sweet. The one main thing i wanted it to do was create video recordings. that it does. it also has several cool options and effects you can apply to the video.
hope this helps.
i still have not been able to get QT to record video with the iSight, or find any explanation from anywhere or anyone as to why. here is a list of a few of the other software apps i tried:
camtwist - (Really cool effects that you can apply to your cam for chats ect.)
BTVPro
capture magic
dreamn capture
gawker
ishowU hd
periscope
UseeMe
webcam tweaker
Rons video grabber

When trying to record result in co60 a pop up appear

Similar Messages

Maybe you are looking for