When trying to restore volume, does not detect my raid set.

So I just bought a Mac Pro. After setting it up, I finally got my extra 320gb hd. So I back everything up with Time Machine, create a raid 0 set with two 320GB HDs, and then try to restore the machine. The problem is when I try to select the volume to restore the Time Machine HD onto, it doesn't detect my RAID set. How do I fix this?

I'm guessing you created a volume on your raid 0 set? Also, is this an issue with software raid or hardware raid, using the apple raid card?

Similar Messages

  • In attempting to reset my ipad2thru itunes it states restore .iTunes has detected an iPad in recovery mode. You must restore this iPad before it can be used with iTunes. when i hit restore it does  not reset

    in attempting to reset my ipad2 thru itunes it states .iTunes has detected an iPad in recovery mode. You must restore this iPad before it can be used with iTunes. when i hit restore it does  not reset

    Step by step
    6. iTune has detected iPad in recovery mode. You must restore this iPad before it can be used with iTune.
    7. iPad Recovery Mode on computer screen
    8. Select "Restore iPad"...
    9. Select "Restore and Update"
    10. Extracting Software.
    11. Preparing iPad for restore.
    12. Waiting for iPad.
    13. Verifying iPad restore...
    14.Restoring iPad software.
    15. Verifying iPad software.
    16. Verifying iPad Restore...
    17. Restoring iPad firmware...
    18. Your iPad is restored to factory settings; keep iPad connected to computer
    19. Activate iPad
    20. Enter Apple ID and Password
    21. Continue
    22. Welcome to Your New iPad

  • Why is my ipad blinking after installing ios8 and when trying to restore, ipad is not recignised?

    why is my ipad blinking after installing ios8 and when trying to restore, ipad is not recignised?

    Hey weepanda,
    Here is the info I found on error 3194:
    Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
    Install the latest version of iTunes.
    Check security software and ensure that communication to gs.apple.com is allowed. Follow these stepsfor assistance with security software.
    Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow theadvanced iTunes Store troubleshooting steps to edit the hosts file or revert to a default hosts file. See "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information."
    Try to restore from another known-good computer and network.
    If the errors persist on another computer, the device may need service.
    via: iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
    All the best,
    Delgadoh

  • How come when I open Safari it does not open to my set homepage it always opens the last page I was on

    how come when I open Safari it does not open to my set homepage it always opens the last page I was on

    Check Safari/Preferences/General/Safari opens with -try setting it to new window.

  • When using Windows, mac volume does not show

    I recently clean installed both Lion and Win 7 with bootcamp.
    Windows volume shows normally when I am using mac,
    however mac volume does not show any more under windows.
    Any help would be appreciated!
    Thanks

    and I have bootcamp version 4.0 which i believe is the latest version

  • System no longer does session restore but when trying to configure, it does not provide me with the option to show windows and tabs from last session

    Before I updated the latest version of Firefox, every time the browser shuts down in error, I would get the System Restore feature which was really nice. Now, this no longer happens and when I went to configure this ability, it does not even provide me with the option to select to show windows and tabs from the last session. How can I get the restore session feature working again?

    Make sure that you do not run Firefox in permanent Private Browsing mode.
    *https://support.mozilla.com/kb/Private+Browsing
    *You enter Private Browsing mode if you select: Tools > Options > Privacy > History: Firefox will: "Never Remember History"
    *To see all History and Cookie settings, choose: Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
    * Deselect: [ ] "Permanent Private Browsing mode"
    * http://kb.mozillazine.org/Session_Restore
    * https://support.mozilla.com/kb/Session+Restore

  • Firefox does not open, says it's running when trying to restart, but does not show up

    Cannot get Firefox to visibly run. Will not open in safe mode and will not close (says its running when I attempt to shutdown or restart computer. Have uninstalled Firefox and reinstalled 8.0 several times and nothing has changed. Have scanned , defragmented, etc. computer and tried a couple system restores as this once cured similar problem with Firefox several months ago.

    Bring up the Windows Task Manager, but look in the "Processes" tab for firefox.exe,
    and close it from there, it won't do you any good looking for it in the "Applications"
    tab when you don't see it on the system taskbar.
    closing Firefox properly, and for when you just want to close and
    restarting Firefox immediately, see more information in
    : https://support.mozilla.com/questions/866027

  • What does it mean when the computer says it does not detect a battery?

    Its usually on the house power when its on the desk, and it has been connected all night. So what does this mean? I have had this machine about 2 weeks, and should not have to replace a battery this soon.

    When do you see this message?
    Any error codes?

  • 785GTM-E45 SATAs Not Detected with RAID Set to AHCI

    I have a Seagate 640GB on SATA 1 and a WD 250GB on SATA 2.  These are detected and show in BIOS when RAID is set at IDE.  Disappear when I set to AHCI.
    Is this a defective board?  Or, is there a compatability issue?  I am used to Award BIOS, that has selection of AHCI under SATA mode, rather than being under the RAID options.  Wondering if they vanish, because it wants matched size for RAID?
    Any info would be a big help, as I don't want to blow away my AHCI drivers on the OS that have AHCI from my previous 780G board.

    It is in the Basic Features Screen.  SATA drives show undetected here, when AHCI is selected. 
    Funny and sad, that the manual's BIOS pages skip over this whole area and goes to the Cell portion.  But, I think I figured out, that though it is not mentioned anywhere, that it appears that the SATA drive area under basic features, is only IDE devices.
    Under Advanced Features and Boot Sequence, I found that the drives showed up and could be selected. 

  • Does not detect HDD & CD-ROM!! heeeelp

    Hello!!
    I recently conected a new motherboard to a friend's computer (MSI 6368).  I connected everything, but when I boot, the BIOS does not detect the HDD and the CD-ROM. I think that is something to do with the BIOS configuration, but I dont know much about it and cant figure put what went wrong with it.  I tested another HDD to see if the current is damaged, but didn't detect the other also.
    I tought that maybe a BIOS update can do something, but I cant update the BIOS from a floppy.
    Please can someone help me out with this??? ;(
    thanx!!!

    has he set the jumpers on the drives right
    master /slave or none for a wd drive if on an ide on its own
    more detail would help
    is the detection on the ide set to auto in the first bios section

  • HT201412 My Ipad is not responding.  It has the small apple in the middle of the screen with the little "thinking" flower symbol surrounding it, and does not respond to restoring. We received an error message when trying to restore from itunes.

    My Ipad is not responding.  It has the small apple in the middle of the screen with the little "thinking" flower symbol surrounding it, and does not respond to restoring. We received an error message when trying to restore from itunes.

    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
     Cheers, Tom

  • HT201210 When trying to restore the iPhone 4, I get a message that says "The requester resource was not found." What does this mean?

    When trying to restore the iPhone 4, I get a message that says "The requester resource was not found." What does this mean?

    Hi timtim89,
    Thanks for visiting Apple Support Communities.
    You may need to restore your iPhone after placing it in recovery mode. See this article for the steps:
    iOS: Unable to update or restore
    http://support.apple.com/kb/ht1808
    Regards,
    Jeremy

  • HT4061 I have an iphone  5s, does not boot, blinking white screen with black logo, when trying itunes restore from mac and pc, error code 4013 which is usb error, any ideas?

    I have an iphone  5s, does not boot, blinking white screen with black logo, when trying itunes restore from mac and pc, error code 4013 which is usb error, any ideas?  Does a totally dead battery have that effect?  I have had it plugged in to a computer overnight, but maybe does not charge when totally dead?
    Please help, thanks in advance all1

    Hi eggroll77,
    Welcome to Apple Support Communities.
    That alert codes does suggest there is a USB related issue. If you haven’t already, try the troubleshooting suggestions in the article linked below.
    iOS: Restore errors 4005, 4013, and 4014
    I hope this helps.
    -Jason

  • Just update iTunes to 10.6.0.40. Now does not detect my iPhone. Tried restart, different USB port. Now what?

    Just updated iTunes to 10.6.0.40. Now it does not detect my iPhone (prompt says reconnect, could not detect). Tried restarting and different USB port. What next asside from system restore with my Windows 7.Cannot Sync or get photos. Have 3Gs with os4.

    I removed iTunes completely, then reinstalled. Still not identifying phone. When iPhone connected, prompt says "iPhone detected, could not be identified properly. Unplug and try again." Still not working.
    Tried by installing previous version of iTunes (10.5.0.142) which did worked. Would not open iTunes because it had been previously installed with a newer version.
    Sucessfully reinstalled ver 10.6.0.40 again. Then tried again by removing iTunes, iCloud and QuickTime. Reinstalled iTunes 10.6.0.40 and same problem, detected iPhone but could not identify properly. What next?

  • I have a G5 and bought and upgraded to osx 10.5.  now i need to upgrade to 10.5.6 or higher, but when i download and try to install, i get message "this volume does not meet requirements for this update".

    i am trying to sync an ipad to a power mac g5.  i bought and upgraded to osx 10.5 and have tried to download and 10.5.6 or higher, but i keep getting same message:  "you cannot install mac os x update on this volume.  this volume does not meet requirements for this update".  help!

    Mac OS X 10.5.8 Combo Update
    Java for Mac OS X 10.5 Update 5
    To me, in all such updates, goes without saying maybe: backup, repair permissions, repair your drive (Disk Warrior does more reliable and thorough job, and it comes out to pennies if you don't wait until needed). Clone your system so you can restore or use the backup - just in case.
    I'd even do a fresh format after your clone is done and do a full OS clean install and update, and then a quick import from Setup Assistant.
    Mac computer with USB 2.0 port
    Mac OS X v10.5.8 or later
    iTunes 10.2 or later recommended
    (free download from www.itunes.com/download)
    iTunes Store account
    Internet access
    I'm going to assume there is something with the partitions on the drive, partition table most likely, though I know I've seen others with that error message - doesn't really point to cause, rarely does (make sure latest firmware update etc is sometimes included but again, we know that isn't why).

Maybe you are looking for

  • DataGrid sync problem

    I use flex sdk 3. I have two datagrids sharing same data provider. I have the folowing situation. 1. Each DataGrid has a CheckBox as itemEditor ( the DataGrid are identical in first phase ); When i change the checkbox state in one , the change is ref

  • Slow acrobat printing

    Extremely slow printing of PDF documents on networked HP 5000 DN. Printing about a page a minute. Files have been reduced in size using Acrobat. No recent software changes. Printer is networked using HP Jet Direct print server. Printing in other ppli

  • Custom ItemTypes in Universal Worklist

    Hi Comunity, I have created two views in the Universal Worklist configuration that work just fine. Now I want to have certain items to only show up in one of those views. Therefore I have set the supported itemtypes parameter to the itemtype I want t

  • Unknown Messages coming in SXMB_MONI

    Hello Experts, In Production server in MONI i am getting many  red colur flag messages with no receiver found with Sender Name Space http://sap.com/xi/APPL/Global2 and SENDER SERVICE INTERFACE ServiceAcknowledgementERPNotification_Out How to fix this

  • RTP receiving whit AVReceive2.java

    Hi , I used AVReceive2.java in order to receiver the RTP flows whit JMF. I create the stream RTP using VLC media player but this error occurs :No format has been registered for payload type 33 (or 96 ,depending the format file in input). How can I ch