When trying to save photos get error (memory RAM, CS6)

After working on the photo, if you try to keep getting the error
could not save as ***.jpg because there is not enough memory ram. try saving without optimization or as baseline jpeg
My notebook config:
core i3 M380. 2.53 GHz
memory 2gb
hdd ~ 40gb free disk C.
graphic integrated
Adobe Photoshop CS 6 13.0.1.1
Windows 7 32bit
PS Preferences:
     Memory used
     Available RAM: 1531 Mb  
     Let Photoshop Use: 995 Mb (65%)
Scratch Disks:
     C:\ 42.59 Gb Free Space
     D:\ 41.23 Gb Free Space

You have the bare minimum RAM for the program to launch.  Running it well is a different matter.
You don't have nearly enough available drive space on that C drive to accomodate both the swap files of the OS and a Photoshop scratch disk.  Your D drive is woefully short on space too.
My system is bare bones minimal and I have a dedicated 250 GB hard drive as my primary Photoshop scratch drive.
The error message you are getting means exactly what it says.

Similar Messages

  • When trying to save interface ,gives error

    Hi ,
    When i am trying to save it gives error below.
    Interface has following errors.Interafce can't be generated or executed.
    Do you want o save anyway.
    Critical     Staging Area     The staging area of this interface is defined on the target but has a logical schema different from the target datastore.
    Redards,
    srini

    Hi,
    you are using different schema for your target tables. i mean you are creating target datastore different from where your sources located.
    suppose that you have staging and target schema. you have to create your tables in staging if sources are located at staging area.
    if you want to use target schema, you have to configure one more logical schema at topology tab.
    and select new logical schema when you are establishing your new interface at overview tab.
    i hope this helps.
    www.odilibrary.com
    Ugur MIHCI

  • When trying to import photos from a memory card I get error "The following files were not imported because they could not be read.".  When i first installed Lightroom i was able to import from the very same card because there are photos in my library.  I

    Someone please help...I am very annoyed with Lightroom as I have been trying to import photos with no success

    This message means that you don't have permission to write to the destination folder or disk drive. This is an operating system issue that can be resolved by changing permissions. And you can get plenty of information on how to do that by doing a web search for "change disk permissions".

  • Error -36 when trying to copy photos from new memory card to mac hd? HELP!! very important photos!

    bought a new memory card, took 700+ photos, i can preview the videos (.mov) in finder and can see the thumbnail preview of the photos (.nef) but cannot open the photos larger in preview or copy any of the videos/photos to the hd. I can open the photos in photoshop directly from memory card but cant copy or move photos/videos from memory card to mac hd. (error -36 pops up..something about the file cant be read) please help!

    I took the memory card back to best buy and the geek squad was able to help me fortunately by putting all of my pic files onto one of their PCs and then putting all my pics back onto a NEW memory card; then we plugged the new memory card into the computer and transferred the files seamlessly. Apparently there was some kind of issue with the way my memory card was formatted. I now put my new memory card into my camera, format it (very easily done with the in camera menu), and take a few test shots and transfer the pics to my computer before doing anything valuable with it. Thankfully all of my files were not damaged.
    *BEWARE!! DO NOT FORMAT YOUR MEMORY CARD WHILE YOU HAVE PICS ON IT AS IT WILL CAUSE ALL PICS TO BE DELETED! IF YOU HAVE VALUABLE PICTURES TRANSFER THE ENTIRE DCIM FOLDER TO ANOTHER COMPUTER, THEN ERASE MEMORY CARD AND FORMAT IT, YOU THEN MAY BE ABLE TO PUT THE DCIM FOLDER BACK ON THE SAME MEMORY CARD AND USE IT SUCCESSFULLY. IF YOU STILL CANT USE THAT SAME MEMORY CARD YOU CAN TRY THE SAME PROCESS BUT AT THE END PUT THE FOLDER ONTO A NEW MEMORY CARD INSTEAD.
    Hope this helps someone =)

  • Adjusting Transactions- trying to save changes getting error

    I am trying to save changes to distribution segments on Transactions in the Receivables module (Transactions --> Transactions) and I am getting this error message:
    FRM-40654 Record Cannot be Updated.
    A search in Metalink said to check for trailing spaces. However, it says
    Please find file afchrchk.sql under $FND_TOP/sql. Please run the
    same and this will create a procedure: chk_trail_space. Now after successfully
    running this , please execute the below commands and then this will diagnose
    the problematic columns (trailing spaces) and then run subsequent update scripts
    and check whether the issue is resolved or not.
    But we do not find afchrchk.sql in $FND_TOP/sql.
    What would be the problem?

    what version of apps are you on? On 11.5.10 it is available under $FND_TOP/sql
    REM +=======================================================================+
    REM | Copyright (c) 1992 Oracle Corporation, Redwood Shores, CA, USA |
    REM | All rights reserved. |
    REM +=======================================================================+
    REM | FILENAME
    REM | afshrchk.sql
    REM | USAGE
    REM | sqlplus applsys/pwd @afchrchk <table> <column>
    REM | where <table> and <column> are optional 'like'-style clauses
    REM | DESCRIPTION
    REM | Check requested table.columns for invalid trailing spaces and
    REM | and control characters.
    REM | These characters cause 'FRM-40654: Record has been updated.'
    REM | errors when column is queried in a form.
    REM +=======================================================================+
    REM $Header: afchrchk.sql 115.9 2005/10/06 06:57:45 stadepal noship $
    REM dbdrv: none
    basically what afchrchk.sql does is to check for spaces on varchar2 columns for tables that you provide as an input and then trim those.
    You can do the same by querying and updating ra_customer_trx, ra_customer_trx_lines and other related tables setting all varchar2 column values to trim(column_name)

  • Win 7 Clean install Firefox 7.0 install ok, but when trying to start Firefix, get error- "XULRunner "Couldn't load XRE functions.""

    Tried turning off antivirus/antispyware - nstill get error msg.
    Also have Thunderbird installed.

    When you say "clean install", do you mean that you also manually erased the C:\program files\mozilla firefox folder before installing, to remove any remaining files from a previous install?
    If so, it seems there is a problem with your profile. Have a look at https://support.mozilla.com/en-US/kb/Basic%20Troubleshooting, and perhaps more specifically https://support.mozilla.com/en-US/kb/Basic%20Troubleshooting#w_8-make-a-new-profile and follow the instructions there for how to test if the problem goes away with a new profile.
    Just post back here if you have questions.

  • When trying to print I get error code 30892 and authentication required how do I fix this?

    I am new to my Mac and am having trouble printing.  I keep getting error code -30892 and authentication required and it can't print.  I have sharing features open on both my PC and my Mac.  Any suggestions?

    Doesn't sound like any error number I'm familiar with. What's your set-up? Are you using a print server?

  • Error when trying to view photos downloaded by memory card to printer..

    When I put my memory card from my camera in my printer I get the box that gives me options of what I want to do with the photos..When I choose view using Windows Live photo gallery I get:
    When I click on view pictures I get :
    pharmerbill

    Hopefully, I got the thread moved...In the past, if I had them in the wrong place, a monitor would move it to the correct forum...Instead of just griping about it being in the wrong place...SORRY...It's very confusing finding the proper location for your
    questions if you're a computer newby...I found this while doing a Firefox plugin check and wonder if maybe this is why Live Photo Gallery doesn't load to view photos when I put my SD card in either the slot in the front of the printer or in the front of my
    computer tower..(Altho I don't have Firefox nor Internet Explorer open when I put in the SD card:
    <small></small>
    pharmerbill

  • When trying to download I get error message unable to initialize installer GUI

    I was having a problem with my email in Firefox so I uninstalled it and tried to download it again, hoping a newer version might fix the email problems I was having.
    When attempting to download Firefox from the website, I get this installer error "Unable to initialize installer GUI"

    Are you saving the Firefox installer to your computer (e.g. desktop)?
    You can find the latest Firefox release in all languages and for all Operating Systems here:
    *Firefox 14.0.x: http://www.mozilla.org/en-US/firefox/all.html

  • When trying to open documents, getting error as File is not a valid Win32 application

    Hi,
    I am trying to open a MPP by clicking on the name of the file. But I am getting the error as "path\filename.mpp is not a valid Wind32 application".
    I am able to save the document and open it in MPP, but clicking on the document name is giving this error "File is not a valid Win32 application".
    I have tried to repair "Microsoft Project". But still the same issue. I am using Office 2010. SharePoint site is SP 2010.
    How to fix this?
    Thanks

    Hi Ed,
    I am sorry, but I could not understand that answer.
    I have put that answer in the below quotes:
    "You are never going to believe what I did. This is a nice ending to a very confusing situation. lol
    I uninstalled Project 2007 and rebooted my laptop and reinstalled Project 2007. No Difference at all. Same thing happened. I just couldn't stop thinking about how 2007 Microsoft Office Component kept showing up in default programs. This has bugged me for days.
    I went browsing in my program files. I typed in Microsoft Office Project. The only thing I found was WINPROJ. I decided to check it out. I checked it's properties, size, location, etc.. What did I have to lose at this point? I clicked on it and it went into
    my default programs as Microsoft Office Project 2007. This doesn't make any sense to me. But, don't try to fix anything else if it isn't broken, right? It's working and I am so relieved. I mean, YAAAAY!!! Another mystery solved...
    Thanks for hanging in there with me to help solve this mystery. You have been of great assistance to me. You made me think outside the box and it worked.
    Laura"
    Does it mean MPP Should be a 2007 version?
    Thanks

  • When trying to save photos attached to gmail the pop up is empty without the option save

    i need help.tried for the first time to save attached pictures to gmail. the pop up i get is an empty  ball like magnifying glass or an empty box without the text save picture. any idea what to do?

    You have the bare minimum RAM for the program to launch.  Running it well is a different matter.
    You don't have nearly enough available drive space on that C drive to accomodate both the swap files of the OS and a Photoshop scratch disk.  Your D drive is woefully short on space too.
    My system is bare bones minimal and I have a dedicated 250 GB hard drive as my primary Photoshop scratch drive.
    The error message you are getting means exactly what it says.

  • In Elements 13, when trying to save, I get this message:Could not save a copy as "agb3_2014:09_054.tif" because the file name was not valid.

    Hi:
    I use Nikon NX2 then save as a TIFF file then do final editing in Elements.  With Elements 8, I could then save as a JPEG file and upload to Flickr.  With Elements 13, I get this message and cannot save:
    Could not save a copy as “agb3_2014:09_054.tif” because the file name was not valid.
    I note the colon (:) in the file name.  I did not place it there.  It is some automatic save.  Typically I save as 2014/09
    It is probably some setting I need to adjust but I am stumped.  All help is welcome.
    Thanks
    Al
    Message was edited by: Albert Butzer

    Don't use the slash, either. Stick to no punctuation except dashes and underscores for safety's sake. Other punctuation usually has another meaning in code.

  • OIM: Invalid LookupQuery when trying to save

    OIM: 11g (11.1.1.5.2)
    When trying to create a form field, of type LookupField, I am entering the following Lookup Query property value:
    select UD_ADGRP.UD_ADGRP_OBJECTGUID,UD_ADGRP.UD_ADGRP_DISPLAYNAME,UD_ADGRP.UD_ADGRP_DESC from UD_ADGRP,OIU,OBJ,OST where UD_ADGRP.ORC_KEY=OIU.ORC_KEY and oiu.ost_key=ost.ost_key and ost.obj_key=obj.obj_key and ost.ost_status in ('Provisioned', 'Enabled') and upper(obj.obj_name) = upper('AD Group');
    When trying to save, I get
    "Invalid Property Value was specified. Insert Failed"
    My console log show:
    java.sql.SQLSyntaxErrorException: ORA-00911: invalid character
    However, running the above query directly via JDeveloper brings back the proper information.
    Any idea what the invalid character might be?
    Thank you.

    Thank you Kevin, that was it. ( I should have seen that before posting)
    However, now when trying to add the 'Lookup Column Name' and 'Column Names' properties, the same error is being thrown.
    I am setting:
    Lookup Column Name to be: UD_ADGRP_OBJECTGUID
    and it is throwing the errors:
    <Mar 5, 2012 6:54:00 PM EST> <Error> <XELLERATE.SERVER> <BEA-000000> <Class/Method: tcSDP/isPropertyValid Error :Sdp Property value is invalid .>
    <Mar 5, 2012 6:54:00 PM EST> <Error> <XELLERATE.SERVER> <BEA-000000> <Class/Method: tcDataObj/save Error :Insertion of dataobject into database failed>
    <Mar 5, 2012 6:54:00 PM EST> <Error> <XELLERATE.DATABASE> <BEA-000000> <Class/Method: tcDataBase/rollbackTransaction encounter some problems: Rollback Executed From
    java.lang.Exception: Rollback Executed From
         at com.thortech.xl.dataaccess.tcDataBase.rollbackTransaction(tcDataBase.java:578)
    (The same error happens trying to set 'Column Names' value.
    I would like to be able to key on the OBJECTGUID attribute because I want to use it in a process task. I don't want to have to lookup it later. ie: I have a child table trigger that is executing, and the task adapter that I have assigned is needing the GUID as input.
    Thank you.

  • I can't use Photobooth - when I open the app, I get the message: "Photo Booth couldn't save your photos - Photo Both encountered an error when trying to save your photos. You photos cannot be saved at this time."

    I can't use Photobooth - when I open the app, I get the message: "Photo Booth couldn't save your photos - Photo Both encountered an error when trying to save your photos. You photos cannot be saved at this time."
    i tried adding user macintosh hd/users/your_user/pictures/"photo booth"  but still photo booth is not working and even images in photo booth cant be deleted they keep coming back

    Back up all data.
    This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
    I've tested these instructions only with the Safari web browser. If you use another browser, they may not work as described.
    Step 1
    If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box markedAllow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
    Triple-click anywhere in the following line on this page to select it:
    { sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). I've tested these instructions only with the Safari web browser. If you use  another browser, you may have to press the return key after pasting.
    You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The command may take a few minutes to run, or perhaps longer if you have literally millions of files in your home folder. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
    Step 2 (optional)
    Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
    Boot into Recovery. When the OS X Utilities screen appears, select
    Utilities ▹ Terminal
    from the menu bar. A Terminal window will open.
    In the Terminal window, type this:
    res
    Press the tab key. The partial command you typed will automatically be completed to this:
    resetpassword
    Press return. A Reset Password window will open. You’re not going to reset a password.
    Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select
     ▹ Restart
    from the menu bar.

  • TS4425 when trying to access photo stream on Apple TV, I am getting the error message terms and conditions have changed, but when I go into iCloud on my Mac the new terms and conditions are not appearing - How can I manually agree to them ?

    When trying to access photo stream on Apple TV, I am getting the error message terms and conditions have changed, but when I go into iCloud on my Mac the new terms and conditions are not appearing - How can I manually agree to them ?

    Welcome to the Apple Community.
    The following article(s) may help you.
    Photo Stream ToU's

Maybe you are looking for