When trying to send a mail, selecting attachement fails with no error.

I imported lots of folders form Kmail (KDE3.5/ trinity) on a previous version (don't remember which one) of Thunderbird.
All worked fine. (I was able to send a variaty of files in email attachements (.xls, .zip, .txt and also files with no extension with no trouble)
Somewhen two weeks ago I updated Thunderbird and it would not allow me to attach files to a mail I want to send.
This means: --click on the button to send a new mail.
--typing a email adress
--typing a subject
--typing 'hello' into the text field
--clicking the button to attach a file
--selecting a text file, picture, .zip, binary and click 'open' in the file selector
== nothing changes in the email window to show that a file has been attached and also on sending the mail the receiver does not receive a mail.
reverting to older version of thunderbird does not seem possible as it appears that there is no link to older packages on thunderbird downlaod site?
where did I go wrong?

I doubt it's a version problem. But I don't run Linux any more.
Old versions can be found here:
http://ftp.mozilla.org/pub/mozilla.org/thunderbird/releases/

Similar Messages

"This message cannot be sent at this time." I have been getting this pop-up for 3 days when trying to send out mail. I don't know what to do! I cannot send mail from this account on any ISP. Please help!

"This message cannot be sent at this time." I have been getting this pop-up for 3 days when trying to send out mail. I don't know what to do! I cannot send mail from this account on any ISP. Please help!

lots of people seem to be havgin a problem sending email from iCloud webmail.
does your email address have uppercase characters in it?
if so, try creating an alias in lowercase (go to preferences in iCloud webmail and select 'accounts') and see if email sends okay from that

When trying to send E-mail via AOL i get the message "rejected by the server because it does not allow relaying" I have checked settings as per answers to similar question

When trying to send E-mail via AOL i get the message "rejected by the server because it does not allow relaying" I have checked settings as per answers to similar question

From which account does the email not send? When sending from an account, the iPad will first try to use the aoutgoing server for that account. If it can't it will try the other accounts listed.in the setting on the iPad for that account. It soulds like the server for the account is not working and that the alternate server is resjecting the messag since it did not originate ffrom the account associated with that server, That is to prevent sending spam.

When trying to send e-mail I get an error message:

When trying to send e-mail I get an error message:Can´t send message.
It was not accepted by the server because it (the server?) does not allow forwardin.

Check the outgoing mail server setting. Make sure that your username and password are in there.
Settings>Mail, Contacts, Calendars>Your email account>Account>Outgoing mail server - tap the server name next to SMTP and check in the primary server and make sure your username and password are entered and correct - even if it says that the password is optional.

I get the following error when formatting a external hard drive. Partition failed with the error: POSIX reports: The operation couldn't be completed. Cannot allocate memory

I get the following error when formatting a external hard drive.
Partition failed with the error:
POSIX reports: The operation couldn’t be completed. Cannot allocate memory
I have a Macbook pro 13" A1278. I purchased it around december 2010. I have a HHD 3.5" drive desktop select II 1.5TB. I purchased it around Febuary/March 2011 to use with my Macbook pro. I formatted it and moved all my files to there, I got it so my macbook's hard drive wouldn't brake and I lose everything on my macbook.
Is there any fixes?

First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."

Error(-101) encountered when trying to send a mail

Hi,
I am trying to send a mail through Business One 2005A. When i click on the email icon, a pop up window appears that asks if i want to attach an edited report with the mail. when i click "Yes", i get an error message error(-101) encountered. but if i click "No", i dont get that error. Can anyone please let me know what this error is all about?
Regards,
Harsh

Hi Fulvia,
This could be caused by folder permissions. Try creating a new share on the server (I typically create a share off the root of the drive, called something like B1_MAIL or SBO_MAIL), granting Full Control to all domain users and then mapping your attachments path in General Settings to this new folder. If this solves the problem then you can tighten up the security to fit your requirements afterwards.
Hope this helps,
Owen

DMP when trying to send a mail

Hi Experts
My client is on 8.81 PL04 and for only one of the users, when they try send an internal mail, it gives the following error:
Documents settings V Lettie\Local settings\applications data \ sap \ sa application has a problem
Diagnostic file c:\documents and settings\Lettie\local settings business one\sap business one 20110623160654.dmp was created. Please contact support and attached diagnostic file.
Your assistance would be greatly appreciated.

Hi,
Also to add to my comments, the dump file generated could be related to many factors like, the memory, the number of applications running on the client, add-ons etc. If this is one of I would suggest you to close all applications, clear the temp files , log back in and try. SAP will only investigate if the issue is occuring everytime and should be reproducible and there is a long process before you can log a message with SAP on dump file.
regards
Johnson

How to bypass proxy when trying to send a mail using javamail smtp

Hi,
I am trying to make a servlet send a mail using javamail smtp protocol on port 25 but i m not able to send getting an exception, i suspect proxy is blocking, so any idea anyone how bypass a proxy.

And if it does turn out that there's a proxy server blocking access to your target SMTP server, the best way to deal with that is to discuss the issue with the person responsible for your network configuration.

Rejected password when trying to send e-mail

When I try to send mail, I get a 'rejected password' message no matter how many times I reenter the password. What could be the problem? I lost one e-mail account when I did an upgrade to high speed about a week ago, and haven't been able to use my new e-mail account to send e-mail messages. I can receive messages using my new account and think all of the server information is correct---all in all-- a confusing mess.

Yes, Bj,
I'm using Apple Mail version 3.6.
Where exactly do I put the fully qualified 'user name'?
I have three columns at the top of the page, Description, Server Name already filled in, and In Use By Account already filled in.
If I click on the Server Name I'm using, another option shows up at the bottom of the page, called Account Information, and below that a place to type in Description. Is that where I'd type my full e-mail address?

No Send button when trying to send new mail

This just started yesterday, when I open the new mail dialogue to send an e-mail there is no toolbar with the "send, save etc." buttons. So there is no way for me to send the e-mails that I'm drafting. I can send replies to emails but not when I am writing a new e-mail. Please help! I use e-mail a lot with my job and this is becoming a problem!

KerryJ wrote:
This just started yesterday, when I open the new mail dialogue to send an e-mail there is no toolbar with the "send, save etc." buttons. So there is no way for me to send the e-mails that I'm drafting. I can send replies to emails but not when I am writing a new e-mail. Please help! I use e-mail a lot with my job and this is becoming a problem!
in a new message window click on the little oval in the upper right corner.

When trying to install itunes i have been faced with an error vc80.crt

i have tried to install itunes and when i try clicking the itunes icon on my desktop it has a pop up sayining could not find application error 2 , i then done a bit of research and it told me to reinstall my apple application software program so when i do that im faced with an error VC90.crt iv tried a clean boot and also uninstal the whole of itunes and re installed a number of times aswell help

Try the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

Problem when trying to send a mail with pdf file attached

When I use this features from Adobe reader, a new mail is opened with pdf file but my Outlook signature is not set automatically. Note that all is right configure in Outlook 2007 for the signature option...
Do you have a solution for this problem ?

someone else reported this (unless it was you) You'll have to insert your sig manually.

PSE 7 stops working when trying to send e-mail

I am running PSE 7, Vista 64. When I try to send a pic using e-mail attachment thru Adobe e-mail svc (AOL e-mail account), PSE 7 crashes. I get a Windows msg saying the PSE 7 stopped working & Windows closes PSE 7. I can see the e-mail msg, but no go. Help.

Check the outgoing mail server setting. Make sure that your username and password are in there.
Settings>Mail, Contacts, Calendars>Your email account>Account>Outgoing mail server - tap the server name next to SMTP and check in the primary server and make sure your username and password are entered and correct - even if it says that the password is optional.

Error when trying to send e-mail

When running the following code:
import oracle.ifs.common.IfsException;
import oracle.ifs.common.*;
import oracle.ifs.beans.LibraryService;
import oracle.ifs.protocols.email.beans.Mailbox;
import oracle.ifs.adk.mail.IfsMessage.*;
import oracle.ifs.adk.mail.*;
import oracle.ifs.server.*;
public class test
public static void main(String[] args)
try
LibraryService service = new LibraryService();
CleartextCredential me = new CleartextCredential("system", "manager");
ConnectOptions options = new ConnectOptions();
options.setServiceName("IfsDefault");
options.setServicePassword("manager");
options.setLocale(Locale.US);
LibrarySession session = service.connect(me, options);
DirectoryUser user = (DirectoryUser) session.getDirectoryUser();
if (user.isAdminEnabled())
session.setAdministrationMode(true);
IfsMessage msg = new IfsMessage(session);
msg.setToHeader(new String[] {"[email protected]"});
msg.setFromHeader(user);
msg.setContentType("text/plain");
msg.setSubject("iFS email test message");
msg.setBody("Hello! This is a test. If you got this, something is working right.");
msg.send();
catch (IfsException e)
e.printStackTrace();
...we get the following message:
java.lang.ClassCastException: oracle.ifs.beans.TieFolder
at oracle.ifs.adk.mail.IfsMessage.<init>(Compiled Code)
at oracle.ifs.adk.mail.IfsMessage.<init>(Compiled Code)
at test.main(Compiled Code)
Thanks in advance for any ideas you may have.

This code snippet works for me... It places the message in the system outbox.
Can you check that your system outbox exists
at /ifs/outbox
and that it is an instance of 'FOLDER' and the that the ACL on it ' is protected (system)'.
public void doSomething(LibrarySession ifs)
throws IfsException
IfsMessage msg = new IfsMessage(ifs);
msg.setToHeader(new String[] {"[email protected]"});
msg.setFromHeader(ifs.getDirectoryUser());
msg.setContentType("text/plain");
msg.setSubject("iFS email test message");
msg.setBody("Hello! This is a test. If you got this, something is working right.");
msg.send();
null

TS2998 Help! My Mac mail uses another person's name in stead of mine in the "from" heading when trying to send e-mail. How can I fix this?

Mac mail started using another person's name instead of mine. In the "From" line it shows someone other than me so the receipient will not know I am sending them an e-mail. HELP!, This is crazy. Is there a fix?

Does this problem happen EVERY time you send an email?
Do you see the wrong FROM entry before you hit the send button? Or does the recipient report seeing another name other than yours?
Do you recognize the incorrect name being shown? Is it something you or someone else using your machine have ever used? Is it a name you have never heard of before?
Go to your SENT folder in Apple Mail. What do you see when you open one of your SENT emails, in the FROM slot? Is the name correct or incorrect?
Also, I don't understand your comment "I noticed it when I try to send a link via e-mail to another person." are you saying that when you paste a link into an email to someone that your name in the FROM field changes? Where are you putting the link, in what place in the email?

When trying to send a mail, selecting attachement fails with no error.

Similar Messages

Maybe you are looking for