When trying to setup a new Operating Unit gives an error: FRM-40735: PRE-FORM trigger raised unhandled exception ORA-06502

EBS - Payables - Version 12.1.3.
We Have many others Operating Units configured and no errors occurs.
This error occurs only if we set a new OU.
All profiles have been configured properly. (MO: Operating Unit, HR: Security Profile, etc..)
The trace shows:
SELECT PROFILE_OPTION_VALUE
FROM FND_PROFILE_OPTION_VALUES
WHERE PROFILE_OPTION_ID = 5852
   AND APPLICATION_ID = 178
   AND LEVEL_ID = 10003
   AND LEVEL_VALUE = 124280
   AND LEVEL_VALUE_APPLICATION_ID = 200
   AND PROFILE_OPTION_VALUE IS NOT NULL
The PROFILE_OPTION_ID = 5852   is "ICX:Session Timeout".
If I set this profile the error does not occur. But its is very strange to have to configure it for a responsibility level.

Hi All.
I discovered what the problem was.
The size of the name of the responsibility was with many characters.
Reduced the size and the error stopped occur.
Tks!

Similar Messages

40735 WHEN-NEW-FORM-INSTANCE-TRIGGER raised unhandled exception ORA-06502

After migrationg my form from 6i to 10g I am getting the 40735 WHEN-NEW-FORM-INSTANCE-TRIGGER raised unhandled exception ORA-06502 err msg. the field is a date field and should be automatically populated with sysdate- 365. but when i open the form to run it is not populated automatically. i have to enter the date manually. the code in the NEW-FORM-INSTANCE trigger is as follows:
declare
record_id RecordGroup;
error_cd number;
begin
-- Set the main window properties
set_window_property(forms_mdi_window, window_state, maximize);
-- Menu Security
set_menu_items;
select sysdate - 365
into :start_date
from dual;
end;
I check the property palate for the start_date field and it looks ok. the form is working fine in windows but the above message is comming out while running the form in Unix.
Any help will be greatly apreciated.

First thing, try qualifying the start_date with the block name
declare
record_id RecordGroup;
error_cd number;
begin
-- Set the main window properties
set_window_property(forms_mdi_window, window_state, maximize);
-- Menu Security
set_menu_items;
select sysdate - 365
into :block.start_date
from dual;
end;

FRM-40735: WHEN-CREATE-RECORD trigger raised unhandled exception ORA-06502.

Hi Guys,
I am a beginner in Oracle apps and have been trying to setup receivables module. I have completed all necessary setups such as system options, transaction types, transaction sources, Auto accounting etc.
Now, when I try to open transaction window, I am getting the following error
FRM-40735: WHEN-CREATE-RECORD trigger raised unhandled exception ORA-06502
RDBMS : 11.2.0.2.0
Oracle Applications : 12.1.3
Thanks in advance.. :-)

Please see these docs.
Repair Orders Form Error: 'FRM-40735: When-Create-Record Trigger raised unhandled exception ORA-06502' For Instances With Alphanumeric Instance Numbers [ID 580147.1]
FRM-40735:WHEN-CREATE-RECORD Trigger Raised Unhandled Exception ORA-06502 [ID 125204.1]
Attempt To Open IGIPAPPF Approval Profile Form Fails With Error: FRM-40735 WHEN-CREATE-RECORD Trigger raised unhandled exception ORA-06502 [ID 418546.1]
Transactions Workbench Error: ORA-06502 [ID 1295626.1]
Transactions Workbench Error: Listing of FRM Errors [ID 1321612.1]
Forms Error: FRM-40735 [ID 1295620.1
Credit Transactions Form Errors Out With FRM-40735 [ID 1079945.1]
Thanks,
Hussein

FRM-40735:WHEN-BUTTON-PRESSED trigger raised unhandled exception ORA-06502

Hi,
I am trying to run a form in which I have a button which when pressed should display another popup window with few text fields in it. I have a WHEN-BUTTON-PRESSED trigger on that particular button and its raising an exception called
FRM-40735: WHEN-BUTTON-PRESSED trigger raised unhandled exception ORA-06502.
When I debug the form with breakpoints its displaying the popup window correctly, but if I run it in a browser as soon as click the button it raises the Unhandled exception given above.
Can anyone help with this? Urgent please....
Thanks

It is VERY good to handle your exceptions, specially a certain pre-defined exceptions like NO_DATA_FOUND, TOO_MANY_ROWS, ZERO_DIVIDE etc...
You can also find samples on how to create user-defined exceptions, just search the online forms help (press the question mark in forms builder) for "User-Defined"
But however you handle your exception never ever do
WHEN OTHERS THEN NULL;If you do that you are telling to forms that no matter what kind of error is thrown do nothing, now that's very dangerous.
You might also want to check Oracle's documentation on [url http://www.oracle.com/pls/db102/portal.portal_db?selected=5]Application Development and do a search on "Exception Handling"
Regards,
Tony
Message was edited by:
Tony Garabedian

When-button-pressed---trigger raised unhandled exception ORA-06502

Dear all,
I am trying to implement a hierarchical tree using the following codes on
when-button-pressed
DECLARE
htree item;
my_sql VARCHAR2 (200) := 'select 1, level, hee_name,null, to_char(hee_no)
from hrm_employee
connect by prior hee_id=hee_dirsup_id
start with hee_dirsup_id is null
order siblings by hee_name';
BEGIN
htree := FIND_ITEM ('trees.tree10');
ftree.SET_TREE_PROPERTY (htree, ftree.query_text, my_sql);
ftree.POPULATE_TREE ('htree');
END;
i am unable to see my hierarchical tree and i am having the above error message.
Can anybody please help me sort this out? Is there any chunks of codes missing resulting to this error.
I'll be very grateful for any help :)
sheetal.

Hi sheetal
trigger raised unhandled exception ORA-06502
Cause* :This error occurs when you try to assign a value to a variable, but the value is larger than the variable can handle.
or if you are trying to assign a non-numeric value to a numeric variable.
--=========================
Action*: pls change the my_sql VARCHAR2 *(200)* to my_sql VARCHAR2 *(2000)*
i am unable to see my hierarchical tree
Pls have a look here at Andreas Weiden sample code....
Hope this helps...
Regards,
Amatu Allah.

FRM-40735: WHEN-CUSTOM-ITEM-EVENT trigger raised unhandled exception ORA-06502.

Hi Expert,
Forms Version : 11.1.2.1.0
Client JRE : 1.6.0_45-b06 Java HotSpot(TM) Client VM
Run webutil_demo form, http://host:9001/forms/frmservlet?form=webutil_demo.fmx&config=webutil
it appears following error.
FRM-40735: WHEN-CUSTOM-ITEM-EVENT trigger raised unhandled exception ORA-06502.
No error logged in java console client side.
I've try to re-compile webutil_demo.fmb
Unattaching and then re-attaching the plsql library webutil.pll to forms using a 11g Forms Builder (instead of earlier version) and then loading the form to the server and compiling form but error still exist.
Will you please help to give any suggestion?
Is there any trace can be enabled to find some more details?

Welcome to OTN
Before posting on this forum please read
FRM-40735: WHEN-CUSTOM-ITEM-EVENT trigger raised unhandled exception ORA-06502.
you'll get some hint here
Oracle/PLSQL: ORA-06502 Error

FRM-40735: WHEN-CREATE-RECORD trigger raised unhandled exception ORA-01403

hi
when i am searching AP module and
Payables Manager - > Oracle Payable - > Setup -> Invoice-> Distribution Set
i am getting this FRM-40735: WHEN-CREATE-RECORD trigger raised unhandled exception ORA-01403.
what to do?
RHEL 5.3
EBS 12.0.0 RUP 6
1)I have tried adadmin compling forms
2)generating trace and tkprof but still found none.
what to do?
Regards
Edited by: new2appsdba on Jul 16, 2010 1:33 AM
Edited by: new2appsdba on Jul 16, 2010 1:37 AM

hsawwan wrote:
Hi,
Please see if (Note: 1074119.1 - R12. APXINWKB: When Trying To Change Invoice Distribution Line Type Get Error: FRM-40735:PRE-RECORD Trigger Raised Unhandled Exception.ORA-01403) is applicable.9747677:R12.AP.B patch which is for 12.1 and made the SR.
>
If this does not help, obtain the FRD file and see if more details are collected in the logs.
Note: 445166.1 - How to create a FRD (Forms Runtime Diagnostic) Log in EBusiness Suite R12 using Forms 10gwatching
Note: 438652.1 - R12: Forms Runtime Diagnostics (FRD), Tracing And Logging For Forms In Oracle Applications
Note: 867943.1 - Steps To Take FRD Trace in 11.5.10 & R12
Thanks,
Hussein

FRM-40735 WHEN-CUSTOM-ITEM-EVENT trigger raised unhandled exception ORA-065

Please help....This error is comming when opening the form. The form is running on oracle 11g 64bits web logic.
"FRM-40735 WHEN-CUSTOM-ITEM-EVENT trigger raised unhandled exception ORA-065"

Welcome to OTN
Before posting on this forum please read
FRM-40735: WHEN-CUSTOM-ITEM-EVENT trigger raised unhandled exception ORA-06502.
you'll get some hint here
Oracle/PLSQL: ORA-06502 Error

When-new-form-Instance trigger raised unhandled exception ORA-04062

Hi,
We are facing ORA-04062 (FRM-40735 WHEN-NEW-FORM-INSTANCE trigger raised unhandled exception ORA 04062) while trying to run the first form of our Application.
We are using a PL/SQL LIBRARY(.pll) for forms.
We are using 10G Application Server,10G DB and Oracle 9i Forms.
DB Version----10.1.0.4.0
Application Server--9.0.4.0
During compilation, we are following the below steps:
1. Compile the .pll
2.Compile Forms.
When we are running these compiled version of forms and pll in Development server where we are compiling it,we are not facing any error.
But when we are taking these compiled version of forms and pll to the Production Server,we are getting the above error.
When we are compiling the .pll in Production server, Application runs fine.
But we should not compile form or pll in Production server.
Searching in Metalink(Note:73506.1) , we find a solution that remote_dependency_mode if set to signature this problem may be resolved.
We tried that by chaning ' REMOTE_DEPENDENCIES_MODE=SIGNATURE' in Init.ora file in both Production and Development server.
But the error still persist.
I think the problem is regarding .pll.Because for the time being to test the application,I compiled the pll in Production and we didnot get any error while running the Application.
But whenever we are tring to deploy the compiled version of pll (compiling in Development sever) and to run the application in Production, we are facing the error.
Also, pll calls one standard database package in SYS.That standard package has VALID status both in Production and in Development.
We donot have priviledge to change/compile that package.So,we didnot change anything in that package. We didnot change anything in .pll also.
We are upgrading our forms from 6i to 9i.And now when we are trying to deploy it to Production we are facing ORA-04062 error.
Can anyone please help ?

Exactly what procedure or package in SYS are you calling that causes this problem?
Are both test and production databases at the same version?
Do you know what procedure or package is named in the error? If not, then you need to improve your on-error trigger processing. I use a PLL_On_Error trigger to capture and improve a number of Oracle messages. It is posted here:
 Re: FRM-40735:Pre_Insert trigger raised unhandled exception ORA-20011
Note especially the part near the end that deals with FRM-40735. (Not sure, but you may also want to display DBMS_ERROR_TEXT in your situation.)
If that doesn't help find the actual problem, I would pull out my Re: Zdebug -- Download a Forms debugging message tool, and add messages before every call in the when-new-form-instance process to zero-in on the offending call.
If it really IS a call to a system process, I would then experiment with creating a server-side package or stored procedure that calls the process, and then call that stored procedure from my form. That way, you effectively insulate your form from system differences.

FRM-40735: WHEN-NEW-RECORD-INSTANCE trigger raised unhandled exception ORA-

Hi,
In R12 When trying to search existing users through Sysadmin or any other user ...we are getting the below errror...
ORA-01403: no data found
FRM-40735: WHEN-NEW-RECORD-INSTANCE trigger raised unhandled exception ORA-06510
This error is not happening when we search for the SYSADMIN user....
Any idea why this error happening...
Also another error which is faced by users other than SYSADMIN is the below one when changing the responsability...
APP-FND-01926---The custom event WHEN-RESPONSIBILITY-CHANGED raised unhandled exception:User Defined Exception
Thanks
Joseph
Edited by: 783717 on Sep 27, 2010 10:49 PM

Hi,
In R12 When trying to search existing users through Sysadmin or any other user ...we are getting the below errror...
ORA-01403: no data found
FRM-40735: WHEN-NEW-RECORD-INSTANCE trigger raised unhandled exception ORA-06510
This error is not happening when we search for the SYSADMIN user....
Any idea why this error happening...What changes have been done recently?
Please run AutoConfig and make sure it completes successfully.
Also another error which is faced by users other than SYSADMIN is the below one when changing the responsability...
APP-FND-01926---The custom event WHEN-RESPONSIBILITY-CHANGED raised unhandled exception:User Defined ExceptionCan you find any errors in the database log file?
Please compile CUSTOM.pll (and other files) as per these docs and try again (as you are on R12 use frmcmp_batch.sh instead of f60gen).
APP-FND-01926, ORA-06508 [ID 797242.1]
APP-FND-01926: The custom event WHEN-LOGON-CHANGED raised unhandled exception: ORA-06508: PL/SQL: [ID 831159.1]
APP-FND-01926 when logon changed ORA-06508 [ID 334295.1]
Thanks,
Hussein

FRM-40735: WHEN-NEW-FORM-INSTANCE trigger raised unhandled except ORA-06508

Dear Colleague,
I am migrating a Forms application from Forms 9i to Forms 10g. Most of my forms were originally created using the Oracle Designer Forms generator. I am also using the Webutil plugin. I just finished configuring Webutil, tested it and it seems to be working fine.
I am able to compile all code and generate a Form executable. However at runtime, I get an error as soon as the first line of code in the WHEN-NEW-FORM-INSTANCE trigger.
The error is:
FRM-40735: WHEN-NEW-FORM-INSTANCE trigger raised unhandled exception ORA-06508
and the beginning of the code is as follows. Using the debugger, I found out that the line:
CGBS2$.SET_COORD_STYLE( 'P' );
initiates an error.
/* CGLY$INIT_CANVASES */
/* Call procedure to ensure correct canvases are visible */
BEGIN
CGBS2$.SET_COORD_STYLE( 'P' );
CGBS2$.SET_QRY_ON_ENTRY( 'Y' );
CGBS2$.SET_NAV_FROM_BLOCK( 'PROJ_BLOCK' );
CGLY$CANVAS_MANAGEMENT;
END;
Is the error telling me that this procedure was not found? How can I proceed to find the cause and solution of my problem? Are one of the Oracle Designer Forms Generator libraries missing?
I would appreciate a tip to help me begin seeing the light at the end of the tunnel.
Thanks and regards,
Randy

Randy,
Glad I could help and you've got your Form running.
@user9230833
It is consider "bad form" to usurp another's post. Please create your own Forum post and include a link or links to any relevant posts. As to Randy's situation, he simply compiled the Forms 9i Library module (.pll) with Forms 10g's compiler. This may not be the cause of your error. When you post your own question, please include your Forms version (full version [eg; 10.1.2.0.2] not the release [6i, 9i, 10g, etc]). Also include any sample code that might help us help you! ;-)
Craig....

FRM-40735: WHEN-NEW-FORM-INSTANCE trigger raised unhandled exception ORA-01

Hello,
when I run my form I am getting the following error:
FRM-40735: WHEN-NEW-FORM-INSTANCE trigger raised unhandled exception ORA-01422
My WHEN-NEW-FORM-INSTANCE trigger is calling to procedures. below is the code in my trigger
begin
Get_User_Info;
Get_org_num;
end;
what could be the problem ?
thanks in advanced,
AJ

One of your procedures must be doing a "select into" but the select is returning more than one row. Examine the queries your procedures are doing.
Gary

FRM-40735: WHEN-NEW-BLOCK-INSTANCE trigger raised unhandled exception ORA-0

I have created two control blocks.In the second control block an item is getting data depending on the value of a particular item in the 1st control block.
I am fetching data for the item in 2nd block using WHEN-NEW-BLOCK-INSTANCE trigger in the 2nd block
It is giving the following error
FRM-40735: WHEN-NEW-BLOCK-INSTANCE trigger raised unhandled exception ORA-01403
When I am giving the following code, it is working
SELECT BM_MR_LCL_STD INTO :BLOCK2.ITEM5 FROM FABRIC_TYPE_MAST_DVLP WHERE FABRIC_TYPE = 'AT';
But when I am giving the below code, it is not working,
SELECT BM_MR_LCL_STD INTO :BLOCK2.ITEM5 FROM FABRIC_TYPE_MAST_DVLP WHERE FABRIC_TYPE = :BLOCK1.ITEM4;
Please Help.
Regards,

That means there were no rows in the table which matched the criteria in your query. You need to trap the no_data_found exception, eg
exception
when no_data_found then
:block2.item5 := null;
end;and if fabric_type is not unique then you'll need to trap the too_many_rows exception too.
I think for this you might be better off with an explicit cursor.

Error when adding any menu - FRM-40735: ON-INSERT trigger raised unhandled

When I try to add any new menu in my newly cloned instance I get this error:
Error when adding any menu - FRM-40735: ON-INSERT trigger raised unhandled excpetion. ORA-04031.
Using Oracle EBS version 12.1.3.
Details:
Menu JOB_STRUCTURE_MENU
User Menu Name Job Strucure Menu
Menu Type Standard
Description Menu to add job, grade, and incentives
Seq = 1
Prompt = Enter and Maintain
Function = Combined Person & Assignment Form WF="US SHRMS TSKFLW
When I click save I get the error.
Any assistance would be greatly appreciated.
Thanks!

Please post the details of the application release, database version and OS.
When I try to add any new menu in my newly cloned instance I get this error:
Error when adding any menu - FRM-40735: ON-INSERT trigger raised unhandled excpetion. ORA-04031.Is the issue with all menus or specific ones only?
Did AutoConfig complete successfully?
When I click save I get the error.
Any assistance would be greatly appreciated.Do you have any invalid objects in the database?
Any errors in the database log file?
Please obtain FRD log file for details about the error -- https://forums.oracle.com/forums/search.jspa?threadID=&q=FRD+AND+R12&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

FRM-40735: WHEN-VALIDATE-ITEM trigger raised unhandled exception ORA-06508

Hi all,
In Production instance we have an issue on AP invoice workbench, gives an error (FRM-40735 Post-Query Trigger On Quering Invoice ) when we retrieve the existing invoice data entered.
For this we compiled the invalid objects and applied the patch according to the metalink id [ID 1209736.1]
After that we came up with new error FRM-40735: WHEN-VALIDATE-ITEM trigger raised unhandled exception ORA-06508.
Can any one help us
Thanks
SAI

Hi Thanks for the reply we have implemented the following things
1) Please download and review the readme for Patch 8671468:R12.AP.B
2) Please apply Patch 8671468:R12.AP.B in a test environment.
3) Check the file versions , they have to be the same as given below.
Patch/115/sql/aphanwfb.pls 120.64.12010000.11
4) Please retest the issue.
5) If the issue is resolved, please migrate the solution as appropriate to other environments.
APXINWKB : When Entering Invoice Details, Get Error: FRM-40735: WHEN-VALIDATE-ITEM trigger raised unhandled exception ORA-06508 [ID 1284114.1]
This is done no luck.
Thanks
Sai

When trying to setup a new Operating Unit gives an error: FRM-40735: PRE-FORM trigger raised unhandled exception ORA-06502

Similar Messages

Maybe you are looking for