When trying to start my Windows server 2008 R2 Data Center, I am getting "ramdisk device creation failed due to insufficient memory",
I have the following:-
VMWare workstation version 9 , with windows server 2008 R2 data center installed.
- I have installed the windows 2008 R2 inside the VM using an iso image.
- The host is windows 7.
I use to work well with the VM, but after adding a new VM to the same workstation . I start getting the following error when starting my old VM
ramdisk device creation failed sue to insufficient memory.
And on the windows boot manger screen they mentioned to :-
inset my windows installation dis and restart my PC.
click “repair your computer”
but not sure if this will fix the problem , baring in mind that the RAM assigned to the VM
is 24 GB & 80 GB hard disk.
The error is
Link.
so can any one advice what is causing this error?
Thanks
You might start by checking the RAM.
http://windows.microsoft.com/en-US/windows7/Diagnosing-memory-problems-on-your-computer
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
Similar Messages
-
Hi All
Please help
my server not working showing display error window server 2008 r2 error show "stop :- c00002e3 security account manager initialization failed because of the for A DIVICE ATTACHED to the system is not funcation"
Please help me how to resolve this issue ???
thnaks !!!Hi,
If there is any external device plug into your computer, please unplug it and restart the Server.
You can also test the issue in Safe mode.
If it can boot into Safe mode, please update any driver has yellow warning on it, also check if the dump file is existing under %SystemRoot%\, if so, please help to post back for our research.
Kate Li
TechNet Community Support -
Error trying to install SP1 Windows Server 2008 R2
Hi team,
I'm having an error when I'm trying to deploy service pack 1 of Windows Server 2008 R2. I try this scenario installing the SP1 in a workgroup machine and the results were successful. But when I'm trying to install in my Domain it doesn't work. Later I remove
the machine from the Domain and again try to install the SP1 and it also doesn't work.
What permissions in files or procedures can I implement for having a successful deploy of Service Pack 1 in my Domain?
Thanks a lot for your assistance.
Regards.
David S.Follow troubleshooting
http://windows.microsoft.com/en-us/windows7/troubleshoot-problems-installing-service-pack
http://windows.microsoft.com/en-us/windows7/windows-7-windows-server-2008-r2-service-pack-1-sp1-installation-error-0x800f0a12
Similar problem has been solved here
http://social.technet.microsoft.com/Forums/windowsserver/en-US/c4ac3279-1b2d-44d2-8e2e-08282f0ba270/cannot-install-sp1-on-windows-2008-r2-64bit-error-0x800f0818?forum=winservergen
http://glazenbakje.wordpress.com/2011/12/01/microsoft-windows-2008-server-r2-unable-to-install-service-pack-1-fix/
Regards
Milos -
CiscoWorks LMS 3.2 Won't Start on Windows Server 2008 Enterprise
All,
I installed CiscoWorks LMS 3.2 RME on Windows Server 2008 Enterprise and the daemon manager won't start. The server is a VMware ESX server 4.0.
I've uninstalled and reinstalled and still nothing.
I get message "The service is not responding to the control function"
Has anyone had this issue?
StephanieThere could be several reasons this happens. Common one in Windows 2008 is the swap is not set properly as it defaults to "Automatically manage paging file size for all drives". Try setting the swap to 8GB manually or whichever is the recommendation for your current device count as per:
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/3.2/install/guide1/prereq.html
Also make sure the startup services are set this way:
CiscoWorks ANI database engine: Manual
CiscoWorks Daemon Manager: Automatic
CiscoWorks RME NG database engine: Manual
CiscoWorks Tomcat Servlet Engine: Manual
CiscoWorks Web Server: Manual
CWCS Cmf database engine: Manual
CWCS rsh/rcp service: Automatic
CWCS syslog service: Automatic
CWCS tftp service: Automatic
DFM dfmEpm database engine: Manual
DFM dfmFh database engine: Manual
DFM dfmInv database engine: Manual
Set DEP for "Windows Essential Programs Only" and set an exclusion for CSCOpx in your anti-virus on-access scanning settings. Note that Windows 2008 R2 versions are not supported. -
Hi,
Some application servers are developed in visual c++ 6.0 are running windows server 2003 properly.when its running in 2008R2
these r not starting.we checked in security log just process creating and terminating with 0X2,it means file not found even not creating any application logs and not appearing in task manager,only in security log.I tried with command prompt[cmd] as administrator.its
not giving any error.
Anyone please help me what this starting problem issue in server 2008.any dependencies like dlls required.I tried multiple ways.I think you are in the wrong forum - OCI questions (as opposed to OCI) should go here:
Oracle Call Interface (OCI)
Best of luck -
When trying to start InDesign CS6 Server: command not found
Greetings,
I just installed InDesign CS6 Server, but when trying to run the application from terminal I get the following error: -bash: InDesignServer: command not found
I thought, maybe it had something to do with the licensing so I ran this command:
MacBook-Pro-van-Mario:~ mariovandeneynde$ cd /Applications/Utilities/Adobe\ Application\ Manager/Enterprise/utilities/APTEE/CS6
MacBook-Pro-van-Mario:CS6 mariovandeneynde$ ./adobe_prtk --tool=StartTrial --leid=InDesignServer-CS6-Mac-GM
RESULT:
Copyright 2012 Adobe Systems Incorporated
All rights reserved.
StartTrial Successful
Return Code = 0
So, I tried to launch IDS again, but always the same error.
Now, my mac isn't a MAC Server, as mentioned in the Tech Specs, but I don't think that should mind, cause the installation was successful.
So, anybody got any ideas what I'm doing wrong?
Thanks!
MarioGot it to work eventually.
I was calling "InDesignServer -port 12345"
But I had to call the indesignserver.command application instead. That did the trick!
Thanks!
M. -
Each time loading Firefox this happens. It just started yesterday. I have downloaded another copy of Firefox and tried that. I have download 3.6.19 and 5.0 versions and both do the same thing.I do not know what to do next
I have reviewed your suggested reading. NOTHING on this page is applicable.
I have deleted the original FIREFOX, UPloaded and installed 3.6.19 and also tried 5.0 version. I have not been able to get FIREFOX working again. I am very disappointed.
Once FIREFOX TRIES TO START the MENU BAR APPEARS AND THE LOCATION BAR APPEARS WITH NO PAGE SELECTED AND THE PINWHEEL STARTS TURNING. FROM THAT POINT ON MY COMPUTER IS LOCKED UP. Can you help PLEASE>
Pat -
Error when trying to start BPEL PM server
Hi ,
I encountered the following error when i try to boot the BPEL PM server.
Can somebody help me with this problem.
Error compiling D:\OraBPELPM_1\integration\orabpel\system\appserver\oc4j\j2ee\ho
me\applications\orabpel_ear\ejb_ob_engine.jar: Syntax error in source
06/09/13 10:48:38 done.
06/09/13 10:48:38 Error instantiating application 'orabpel' at file:/D:/OraBPELP
M_1/integration/orabpel/system/appserver/oc4j/j2ee/home/applications/orabpel_ear
/: Error initializing ejb-module; Exception Error in application orabpel: Error
loading package at file:/D:/OraBPELPM_1/integration/orabpel/system/appserver/oc4
j/j2ee/home/applications/orabpel_ear/ejb_ob_engine.jar,
Error compiling D:\OraBPELPM_1\integration\orabpel\system\appserver\oc4j\j2ee\ho
me\applications\orabpel_ear\ejb_ob_engine.jar: Syntax error in source
06/09/13 10:48:38 Application bc4j (bc4j) initialized...
06/09/13 10:48:38 Auto-deploying - hw_services.war (No previous deployment found
06/09/13 10:48:38 Auto-deploying - compiling and loading...
Error occurred during initialization of VM
Could not reserve enough space for object heap
Error compiling D:\OraBPELPM_1\integration\orabpel\system\appserver\oc4j\j2ee\ho
me\applications\hw_services\hw_services.war: Syntax error in source
Error in application hw_services: Error loading package at file:/D:/OraBPELPM_1/
integration/orabpel/system/appserver/oc4j/j2ee/home/applications/hw_services/hw_
services.war,
Error compiling D:\OraBPELPM_1\integration\orabpel\system\appserver\oc4j\j2ee\ho
me\applications\hw_services\hw_services.war: Syntax error in source
06/09/13 10:48:39 done.
06/09/13 10:48:39 Error instantiating application 'hw_services' at file:/D:/OraB
PELPM_1/integration/orabpel/system/appserver/oc4j/j2ee/home/applications/hw_serv
ices.ear: Error initializing ejb-module; Exception Error in application hw_servi
ces: Error loading package at file:/D:/OraBPELPM_1/integration/orabpel/system/ap
pserver/oc4j/j2ee/home/applications/hw_services/hw_services.war,
Error compiling D:\OraBPELPM_1\integration\orabpel\system\appserver\oc4j\j2ee\ho
me\applications\hw_services\hw_services.war: Syntax error in source
06/09/13 10:48:39 Auto-deploying - OWFWrapperEJB.jar (No previous deployment fou
nd)...
06/09/13 10:48:39 Auto-deploying - compiling and loading...
Error occurred during initialization of VM
Could not reserve enough space for object heap
Error compiling D:\OraBPELPM_1\integration\orabpel\system\appserver\oc4j\j2ee\ho
me\applications\owf\OWFWrapperEJB.jar: Syntax error in source
Error in application owf: Error loading package at file:/D:/OraBPELPM_1/integrat
ion/orabpel/system/appserver/oc4j/j2ee/home/applications/owf/OWFWrapperEJB.jar,
Error compiling D:\OraBPELPM_1\integration\orabpel\system\appserver\oc4j\j2ee\ho
me\applications\owf\OWFWrapperEJB.jar: Syntax error in source
06/09/13 10:48:43 done.
06/09/13 10:48:43 Error instantiating application 'owf' at file:/D:/OraBPELPM_1/
integration/orabpel/system/appserver/oc4j/j2ee/home/applications/owf.ear: Error
initializing ejb-module; Exception Error in application owf: Error loading packa
ge at file:/D:/OraBPELPM_1/integration/orabpel/system/appserver/oc4j/j2ee/home/a
pplications/owf/OWFWrapperEJB.jar,
Error compiling D:\OraBPELPM_1\integration\orabpel\system\appserver\oc4j\j2ee\ho
me\applications\owf\OWFWrapperEJB.jar: Syntax error in source
06/09/13 10:48:43 Application b2bwsilplugin (BPEL-B2B adapter WSIL plugin) initi
alized...
06/09/13 10:48:43 Application icwsilplugin (BPEL-IC adapter WSIL plugin) initial
ized...
06/09/13 10:48:43 Web-App default:defaultWebApp (0.0.0.0/0.0.0.0:9700/) started.
06/09/13 10:48:43 Building Global TagLibrary Persistent Cache
06/09/13 10:48:43 Looking for global resource at D:\OraBPELPM_1\integration\orab
pel\system\appserver\oc4j\j2ee\home\config\..\jsp\lib\taglibDone getting applica
tion current resources
06/09/13 10:48:43 Done initializing cache
06/09/13 10:48:43 Refreshing global cache - from existing cache ...
06/09/13 10:48:43 Building Application TagLibrary Persistent Cache for defaultWe
bApp
06/09/13 10:48:44 Done getting application current resources
06/09/13 10:48:44 Done initializing cache
06/09/13 10:48:44 Refreshing application cache - from existing cache ...
06/09/13 10:48:44 Found 0 listeners
06/09/13 10:48:44 Web-App orabpel:admin_war (0.0.0.0/0.0.0.0:9700/BPELAdmin) sta
rted...
06/09/13 10:48:44 Building Application TagLibrary Persistent Cache for admin_war
06/09/13 10:48:44 Done getting application current resources
06/09/13 10:48:44 Done initializing cache
06/09/13 10:48:44 Refreshing application cache - from existing cache ...
06/09/13 10:48:44 Found 0 listeners
06/09/13 10:48:44 Web-App orabpel:console_war (0.0.0.0/0.0.0.0:9700/BPELConsole)
started...
06/09/13 10:48:44 Building Application TagLibrary Persistent Cache for console_w
ar
06/09/13 10:48:44 Done getting application current resources
06/09/13 10:48:44 Done initializing cache
06/09/13 10:48:44 Refreshing application cache - from existing cache ...
06/09/13 10:48:44 Found 0 listeners
06/09/13 10:48:44 Web-App orabpel:startup_war (0.0.0.0/0.0.0.0:9700/orabpel) sta
rted...
06/09/13 10:48:44 Building Application TagLibrary Persistent Cache for startup_w
ar
06/09/13 10:48:44 Done getting application current resources
06/09/13 10:48:44 Done initializing cache
06/09/13 10:48:44 Refreshing application cache - from existing cache ...
06/09/13 10:48:44 Found 0 listeners
06/09/13 10:48:44 log4j:WARN No appenders could be found for logger (org.collaxa
.thirdparty.apache.axis.transport.http.AxisServlet).
06/09/13 10:48:44 log4j:WARN Please initialize the log4j system properly.
06/09/13 10:48:47 java.lang.Exception: Failed to create "ejb/collaxa/system/Serv
erBean" bean; exception reported is: "javax.naming.NameNotFoundException: ejb/co
llaxa/system/ServerBean not found
at com.evermind.server.rmi.RMIContext.lookup(RMIContext.java:164)
at com.evermind.server.ApplicationContext.lookup(ApplicationContext.java
:333)
at com.evermind.server.ApplicationContext.lookup(ApplicationContext.java
:120)
at javax.naming.InitialContext.lookup(InitialContext.java:347)
at com.oracle.bpel.client.util.BeanRegistry.lookupServerBean(BeanRegistr
y.java:95)
at com.oracle.bpel.client.util.BeanRegistry.lookupServerBean(BeanRegistr
y.java:81)
at com.oracle.bpel.client.util.BeanCache.getServerBean(BeanCache.java:88
at com.collaxa.cube.admin.CXLoaderServlet.init(CXLoaderServlet.java:59)
at javax.servlet.GenericServlet.init(GenericServlet.java:258)
at com.evermind.server.http.HttpApplication.loadServlet(HttpApplication.
java:2354)
at com.evermind.server.http.HttpApplication.findServlet(HttpApplication.
java:4795)
at com.evermind.server.http.HttpApplication.initPreloadServlets(HttpAppl
ication.java:4889)
at com.evermind.server.http.HttpApplication.initDynamic(HttpApplication.
java:1015)
at com.evermind.server.http.HttpApplication.<init>(HttpApplication.java:
549)
at com.evermind.server.Application.getHttpApplication(Application.java:8
90)
at com.evermind.server.http.HttpServer.getHttpApplication(HttpServer.jav
a:707)
at com.evermind.server.http.HttpSite.initApplications(HttpSite.java:625)
at com.evermind.server.http.HttpSite.setConfig(HttpSite.java:278)
at com.evermind.server.http.HttpServer.setSites(HttpServer.java:278)
at com.evermind.server.http.HttpServer.setConfig(HttpServer.java:179)
at com.evermind.server.ApplicationServer.initializeHttp(ApplicationServe
r.java:2394)
at com.evermind.server.ApplicationServer.setConfig(ApplicationServer.jav
a:1551)
at com.evermind.server.ApplicationServerLauncher.run(ApplicationServerLa
uncher.java:92)
at java.lang.Thread.run(Thread.java:534)
06/09/13 10:48:47 at com.oracle.bpel.client.util.BeanRegistry.lookupServer
Bean(BeanRegistry.java:109)
06/09/13 10:48:47 at com.oracle.bpel.client.util.BeanRegistry.lookupServer
Bean(BeanRegistry.java:81)
06/09/13 10:48:47 at com.oracle.bpel.client.util.BeanCache.getServerBean(B
eanCache.java:88)
06/09/13 10:48:47 at com.collaxa.cube.admin.CXLoaderServlet.init(CXLoaderS
ervlet.java:59)
06/09/13 10:48:47 at javax.servlet.GenericServlet.init(GenericServlet.java
:258)
06/09/13 10:48:47 at com.evermind.server.http.HttpApplication.loadServlet(
HttpApplication.java:2354)
06/09/13 10:48:47 at com.evermind.server.http.HttpApplication.findServlet(
HttpApplication.java:4795)
06/09/13 10:48:47 at com.evermind.server.http.HttpApplication.initPreloadS
ervlets(HttpApplication.java:4889)
06/09/13 10:48:47 at com.evermind.server.http.HttpApplication.initDynamic(
HttpApplication.java:1015)
06/09/13 10:48:47 at com.evermind.server.http.HttpApplication.<init>(HttpA
pplication.java:549)
06/09/13 10:48:47 at com.evermind.server.Application.getHttpApplication(Ap
plication.java:890)
06/09/13 10:48:47 at com.evermind.server.http.HttpServer.getHttpApplicatio
n(HttpServer.java:707)
06/09/13 10:48:47 at com.evermind.server.http.HttpSite.initApplications(Ht
tpSite.java:625)
06/09/13 10:48:47 at com.evermind.server.http.HttpSite.setConfig(HttpSite.
java:278)
06/09/13 10:48:47 at com.evermind.server.http.HttpServer.setSites(HttpServ
er.java:278)
06/09/13 10:48:47 at com.evermind.server.http.HttpServer.setConfig(HttpSer
ver.java:179)
06/09/13 10:48:47 at com.evermind.server.ApplicationServer.initializeHttp(
ApplicationServer.java:2394)
06/09/13 10:48:47 at com.evermind.server.ApplicationServer.setConfig(Appli
cationServer.java:1551)
06/09/13 10:48:47 at com.evermind.server.ApplicationServerLauncher.run(App
licationServerLauncher.java:92)
06/09/13 10:48:47 at java.lang.Thread.run(Thread.java:534)
06/09/13 10:48:47 Web-App orabpel:httpbinding (0.0.0.0/0.0.0.0:9700/httpbinding)
started...
06/09/13 10:48:47 Building Application TagLibrary Persistent Cache for httpbindi
ng
06/09/13 10:48:47 Done getting application current resources
06/09/13 10:48:47 Done initializing cache
06/09/13 10:48:47 Refreshing application cache - from existing cache ...
06/09/13 10:48:47 Found 0 listeners
06/09/13 10:48:47 Web-App bc4j:webapp (0.0.0.0/0.0.0.0:9700/webapp) started...
06/09/13 10:48:47 Building Application TagLibrary Persistent Cache for webapp
06/09/13 10:48:47 Done getting application current resources
06/09/13 10:48:47 Done initializing cache
06/09/13 10:48:47 Refreshing application cache - from existing cache ...
06/09/13 10:48:48 Found 0 listeners
06/09/13 10:48:48 Web-App hw_services:deploy (0.0.0.0/0.0.0.0:9700/integration/s
ervices/deploy) started...
06/09/13 10:48:48 Building Application TagLibrary Persistent Cache for deploy
06/09/13 10:48:48 Done getting application current resources
06/09/13 10:48:48 Done initializing cache
06/09/13 10:48:48 Refreshing application cache - from existing cache ...
06/09/13 10:48:48 Found 0 listeners
06/09/13 10:48:48 Web-App hw_services:hw_services (0.0.0.0/0.0.0.0:9700/integrat
ion/services) started...
06/09/13 10:48:48 Building Application TagLibrary Persistent Cache for hw_servic
es
06/09/13 10:48:48 Done getting application current resources
06/09/13 10:48:48 Done initializing cache
06/09/13 10:48:48 Refreshing application cache - from existing cache ...
06/09/13 10:48:48 Found 0 listeners
06/09/13 10:48:48 Web-App hw_services:testconnection (0.0.0.0/0.0.0.0:9700/integ
ration/services/testconnection) started...
06/09/13 10:48:48 Building Application TagLibrary Persistent Cache for testconne
ction
06/09/13 10:48:48 Done getting application current resources
06/09/13 10:48:48 Done initializing cache
06/09/13 10:48:48 Refreshing application cache - from existing cache ...
06/09/13 10:48:48 Found 0 listeners
06/09/13 10:48:48 Web-App hw_services:worklistxpress (0.0.0.0/0.0.0.0:9700/integ
ration/worklistapp) started...
06/09/13 10:48:48 Building Application TagLibrary Persistent Cache for worklistx
press
06/09/13 10:48:48 Done getting application current resources
06/09/13 10:48:48 Done initializing cache
06/09/13 10:48:48 Refreshing application cache - from existing cache ...
06/09/13 10:48:49 Found 0 listeners
06/09/13 10:48:49 Web-App owf:owf (0.0.0.0/0.0.0.0:9700/integration/owf) started
06/09/13 10:48:49 Building Application TagLibrary Persistent Cache for owf
06/09/13 10:48:49 Done getting application current resources
06/09/13 10:48:49 Done initializing cache
06/09/13 10:48:49 Refreshing application cache - from existing cache ...
06/09/13 10:48:49 Found 0 listeners
06/09/13 10:48:49 NOT running under appserver environment
06/09/13 10:48:49 javax.naming.NameNotFoundException: loc/jdbc/BPELServerDataSou
rce not found
06/09/13 10:48:49 at com.evermind.server.rmi.RMIContext.lookup(RMIContext.
java:164)
06/09/13 10:48:49 at com.evermind.server.ApplicationContext.lookup(Applica
tionContext.java:333)
06/09/13 10:48:49 at com.evermind.server.ApplicationContext.lookup(Applica
tionContext.java:120)
06/09/13 10:48:49 at javax.naming.InitialContext.lookup(InitialContext.jav
a:347)
06/09/13 10:48:49 at oracle.tip.pc.services.owf.AppWrapper.getDataSource(A
ppWrapper.java:53)
06/09/13 10:48:49 at oracle.tip.pc.services.owf.BridgeDBWrapper.<init>(Bri
dgeDBWrapper.java:77)
06/09/13 10:48:49 at oracle.tip.pc.services.owf.callback.OWFMonitorServlet
.init(OWFMonitorServlet.java:45)
06/09/13 10:48:49 at com.evermind.server.http.HttpApplication.loadServlet(
HttpApplication.java:2354)
06/09/13 10:48:49 at com.evermind.server.http.HttpApplication.findServlet(
HttpApplication.java:4795)
06/09/13 10:48:49 at com.evermind.server.http.HttpApplication.initPreloadS
ervlets(HttpApplication.java:4889)
06/09/13 10:48:49 at com.evermind.server.http.HttpApplication.initDynamic(
HttpApplication.java:1015)
06/09/13 10:48:49 at com.evermind.server.http.HttpApplication.<init>(HttpA
pplication.java:549)
06/09/13 10:48:49 at com.evermind.server.Application.getHttpApplication(Ap
plication.java:890)
06/09/13 10:48:49 at com.evermind.server.http.HttpServer.getHttpApplicatio
n(HttpServer.java:707)
06/09/13 10:48:49 at com.evermind.server.http.HttpSite.initApplications(Ht
tpSite.java:625)
06/09/13 10:48:49 at com.evermind.server.http.HttpSite.setConfig(HttpSite.
java:278)
06/09/13 10:48:49 at com.evermind.server.http.HttpServer.setSites(HttpServ
er.java:278)
06/09/13 10:48:49 at com.evermind.server.http.HttpServer.setConfig(HttpSer
ver.java:179)
06/09/13 10:48:49 at com.evermind.server.ApplicationServer.initializeHttp(
ApplicationServer.java:2394)
06/09/13 10:48:49 at com.evermind.server.ApplicationServer.setConfig(Appli
cationServer.java:1551)
06/09/13 10:48:49 at com.evermind.server.ApplicationServerLauncher.run(App
licationServerLauncher.java:92)
06/09/13 10:48:49 at java.lang.Thread.run(Thread.java:534)
06/09/13 10:48:49 Web-App b2bwsilplugin:b2bwsilplugin (0.0.0.0/0.0.0.0:9700/B2BW
SIL) started...
06/09/13 10:48:49 Building Application TagLibrary Persistent Cache for b2bwsilpl
ugin
06/09/13 10:48:49 Done getting application current resources
06/09/13 10:48:49 Done initializing cache
06/09/13 10:48:49 Refreshing application cache - from existing cache ...
06/09/13 10:48:49 Found 0 listeners
06/09/13 10:48:49 B2B not installed
06/09/13 10:48:49 Web-App icwsilplugin:icwsilplugin (0.0.0.0/0.0.0.0:9700/ic) st
arted...
06/09/13 10:48:49 Building Application TagLibrary Persistent Cache for icwsilplu
gin
06/09/13 10:48:49 Done getting application current resources
06/09/13 10:48:49 Done initializing cache
06/09/13 10:48:49 Refreshing application cache - from existing cache ...
06/09/13 10:48:49 Found 0 listeners
06/09/13 10:48:49 Interconnect not installed
06/09/13 10:48:49 Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)
initializedHi guys:
I got exactly the same error. I recently installed BPEL Process Manager for Developers 10g Release 2 (10.1.2) in windows XP.
The default setting for BPEL VM memory is Xms512m -Xmx512m -Xmn300m. I tried to set maximum size to 1024 but I had this error.
Error occurred during initialization of VM
Could not reserve enough space for object heap
if any body can suggest a solution will be great .
Thanks.
Message was edited by:
user533906
Message was edited by:
user533906 -
HP Offiejet Pro 8000 A809 prints carbage when using network connection on Windows Server 2008
We are using HP Offiejet Pro 8000 A809 on our network, and they are installed on a Windows 2008 Server.
But when we are sending a print command it prints only garbage. We've tried different print drivers but without success.
Anyone experience the same problem and have a solution?
Thankstemporary solution from HP is to use the standard HP Deskjet 990c driver.
it works but i hope they make a proper driver. -
TargetName error when trying to start in-process server
I just put in a fresh install of Forms and Reports on a server. Everything started up ok except for my in-process reports server, which just refuses to start. When I went to see if it was giving any errors (it isn't, which is odd...), I noticed a different error. I'm not sure if it's related at all. The error just says
targetName /Farm_OFR-Unit-Domain/OFR-Unit-Domain
That's it. No error number or anything... Has anyone run across this error before? I can't figure out what's causing it for the life of me!We just did another fresh install of JRockit, WebLogic, and Forms & Reports and still running into this error...
-
Error: 0x800f0826 recived when installing SP1 of windows server 2008 R2
Tried to install the Windows server 2008 R2 SP1 but failed with the error code 0x800f0826.
The update install fine and when reboots it says "Installation was not successful" Error 0x800f0826.
I already follow steps as mentioned in this http://support.microsoft.com/kb/2505743 , but still no success.
plz. advice
SALMANBelow are the CheckSUR.persist logs.
=================================
Checking System Update Readiness.
Binary Version 6.1.7601.21645
Package Version 15.0
2012-06-01 23:21
Checking Windows Servicing Packages
Checking Package Manifests and Catalogs
Checking Package Watchlist
Checking Component Watchlist
Checking Packages
Checking Component Store
Summary:
Seconds executed: 868
No errors detected
=================================
Checking System Update Readiness.
Binary Version 6.1.7601.21645
Package Version 15.0
2012-06-04 11:26
Checking Windows Servicing Packages
Checking Package Manifests and Catalogs
Checking Package Watchlist
Checking Component Watchlist
Checking Packages
Checking Component Store
Summary:
Seconds executed: 557
No errors detected
=================================
Checking System Update Readiness.
Binary Version 6.1.7601.21645
Package Version 15.0
2012-06-04 11:53
Checking Windows Servicing Packages
Checking Package Manifests and Catalogs
Checking Package Watchlist
Checking Component Watchlist
Checking Packages
Checking Component Store
Summary:
Seconds executed: 271
No errors detected
=================================
Checking System Update Readiness.
Binary Version 6.1.7601.21645
Package Version 15.0
2012-06-04 12:47
Checking Windows Servicing Packages
Checking Package Manifests and Catalogs
Checking Package Watchlist
Checking Component Watchlist
Checking Packages
Checking Component Store
=================================
Checking System Update Readiness.
Binary Version 6.1.7601.21645
Package Version 15.0
2012-06-04 12:51
Checking Windows Servicing Packages
Checking Package Manifests and Catalogs
Checking Package Watchlist
Checking Component Watchlist
Checking Packages
Checking Component Store
Summary:
Seconds executed: 132
No errors detected
SALMAN -
Auroraservice error when trying to start http Server (9iAS)
Hi
my problem is that when trying to start oracle http server I get the error message:
syntax error on line 14 of mod__ose.conf
AuroraService-directive already in effect for this sever
what does it mean and what can I do?
thanks in advanceThanks, I now see the ASP.NET 20 version. I am now getting the following error.
Server Error in '/OSoft' Application.
Object reference not set to an instance of an object.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.NullReferenceException: Object reference not set to an instance of an object.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[NullReferenceException: Object reference not set to an instance of an object.]
System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg) +264
System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type) +877
OSoft.Services.Platform.Logging.Logger.logError(Object source, String user, String err) +0
OSoft.Consumers.ZFP.WebBase.PageBase.logException(Exception ex) +312
OSoft.Consumers.ZFP.WebBase.PageBase.WriteException(Exception ex) +24
OSoft.Consumers.ZFP.WebBase.PageBase.page_load(Object sender, EventArgs e) +2313
System.EventHandler.Invoke(Object sender, EventArgs e) +0
System.Web.UI.Control.OnLoad(EventArgs e) +67
System.Web.UI.Control.LoadRecursive() +35
System.Web.UI.Page.ProcessRequestMain() +750
Version Information: Microsoft .NET Framework Version:1.1.4322.2407; ASP.NET Version:1.1.4322.2407 -
Windows Server 2008 R2 activation via KMS failure
Hello,
I'm trying to activate about 20 Windows Server 2008 R2 via KMS. Before that I have successfully activated Windows 7 clients and Microsoft Office 2010 products. But when I try to activate Windows Server 2008 R2 clients via kms I'm getting the following error
on the KMS host:
. Exception System.Runtime.InteropServices.COMException (0xC004F074)
KMS host installed on the machine with Windows 7 Professional OS. From the VAMT GUI I can see the following Windows server license information :
Key Type : CSVLK
Edition : ServerStandard;ServerEnterprise;ServerWeb;ServerHPC
Description : Server 2008 R2 Std and Ent Volume.
If I try to activate product from the client I get the following error :
Error: 0xC004F074 The Software Licensing Service reported that the computer could not be activated. The Key Management Service(KMS) is unavailable.
I have searched a lot about this error. But still cannot solve the issue.
Thanks & Regards
UlziiYes KMS host is Windows 7. I read all documents about KMS but haven't read this doc. So I have to change KMS host or add Win Server KMS host, that's right?
Yes that's right. Windows "Client" OS editions, when setup as KMShost, cannot issue activations for Windows "Server" OS editions.
To do so, you will need a KMShost product key for Windows Server - you will only have such a product key if you have purchased Windows Server licenses through Volume Licensing.
(The Windows 7 KMShost product key cannot be installed on Windows Server OS)
http://social.technet.microsoft.com/wiki/contents/articles/22510.volume-activation-kms-mak-adba-avma.aspx
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!) -
Unable to Install Windows Server 2012 on Windows Server 2008 R2 SP1 Hyper-V
My attempts to install are failing with a message "Windows cannot install required files. The file may be corrupt or missing....Error code: 0x800705070".
I am posting this on the Wondows 2012 Server forum but I have had exactly the same problem as described below with Windows 2008 R2 SP1.
As the title says this is on a Windows Server 2008 R2 SP1 host with all current updates. I have downloaded the ISO file from a Technet subscription file twice, once by direct download and once by the Akamai downloader. The virtual disk is connected with
the default IDE driver. I mounted both installation images as ISOs, located on a file system on the host server. I have tried installs by deleting the VM and recreating both the VM and a new virtual disk, re-using a previously created virtual disk, and
deleting the partitions in a previously created virtual disk, and executing the format command, and then attempting the install.
I have exactly the same problem trying to create a Windows Server 2008 R2 SP1 VM on the same host OS. With those attempts, I downloaded the Technet subscription iso 4 or 5 times, and burned one to a DVD which I attached to the created VM. Same
error message.
The virtual machines and virtual disks I created and used were all located on an RAID5 array, on a builtin Intel RAID controller using Intel Rapid Storage Technology software version 11.2.0.1066. The host Windows Server 2008 R2 SP1 uses this file system
but the OS is installed on a dedicated drive (C).
I had previously created a guest VM with Windows Server 2008 R2 (several months worth of updates ago) without drama.
I have spent hours reading forums and blog articles on this. A common response is to download the iso another time, and/or burn it to a DVD instead of mounting an iso image. Although I didn't do the later yet with 2012 Server, but I have done these
other steps attempting to install Windows 2008 Server SP1. The install process takes a while (not to mention doing multiple downloads). Given this seems to be a common recommended remedy, and indeed based on posts does seem to eliminate the problem is some
cases, why doesn't somebody change the Microsoft installer program so it does a thorough integrity check at the beginning of the install process?Jeff,
After the exercise of Windows 2012 Server successfully installing (as I described above) I also successfully installed Windows 2008 R2 on Hyper-V. From my standpoint, I have eliminated the problem (which isn't the same as correcting the problem).
The answer to your specific question regarding Hyper-V support is that the motherboard I am using, an Asus P5Q, is not supported by Windows 2008 R2 because it doesn't use ECC memory, and the vendor doesn't say it supports Windows 2008. But I am sure you
know the motherboard vendors often don't test older motherboards with newer software versions. It appears that in specifying ECC memory Microsoft is trying to protect users of Windows Server from hurting themselves, not saying the software won't run.
Having said that, my suspicion in the beginning was, and still is, that it was some variable(s) left in an unknown state in the Hyper-V environment, which was why after trying to install Windows 2008 R2 several times I tried Windows 2012 which resulted in
the same error, and then encountered the same error trying to install Windows 7 on the same Hyper-V installation. The specific Hyper-V Windows 2008 R2 server had run without any operating problems for months before I started having trouble, and although it
had been quite a while since I had created VMs, that process used to work. The hardware didn't change. What changed was applying updates through Microsoft Update, and a few access control rights I changed, and at least I think, I set back to their original
value.
So in short, no, my hardware isn't supported by Windows 2008 Server. Two, your assertion that you are running the same software configuration that I am is very unlikely to be true. There are an extremely large number of things which are different between
your test system and mine, such as which Windows 2008 components are installed, what updates were installed and in what order they were installed, and what other third party software each of us is running, and between AD, and all the features, a large number
of potential differences in ACLs, options, etc. and I don't for a minute think this particular problem was caused by the underlying hardware.
I do appreciate your taking the time to try to help me, and I hope there is one thing you and I could agree on. Microsoft could pretty easily make it much easier to isolate problems. In this day and age reporting hex error codes (as opposed to doing the
table lookup in the error handling proc), and not providing more diagnostic information seems to me to be almost quaint. And in this case Microsoft can dismiss my problems on the grounds it was all on unsupported hardware. Unfortunately, I think they
are missing an opportunity to make their software better, because in my opinion what I encountered there are a set of conditions which will cause installations to fail that aren't going to get corrected. -
Active-Passive Failover cluster in Windows Server 2008 R2
Hi,
As per the client requirements, I build an active-passive Oracle 11g R2 database cluster in Windows Server 2008 R2.
(Used Microsoft cluster as Client don't have Fail Safe licence)
As per the configuration, I follow the below mentioned steps:
a)OS vendor configured Active-Passive Windows Cluster
b)Installed Oracle 11g R2 on both the nodes with same ORACLE_HOME name
c)Create Listener and configured it with cluster IP in Node1
d)Create Database from Node1. Physical files location are all in Storage
e)Create Oracle Service with the same name in the 2nd node and copy all the files like spfile,tnsnames.ora,listener.ora,password file to Node2
f)Configure Listener with the same Oracle SID.
g)Test database failover from Node2 with Listener registration
h)Open the Windows Failover Manager to configure the Oracle Database and Listener Service in the Cluster Group
Now I am facing problem by moving Cluster Group movement. Whenever trying to moving the group, Listerner service is not getting up by Cluster Manager as quorum is not included in the group and that quorum disk is not moving in the failover node with the Oracle Cluster Group. As per my understanding Quorum having information of Cluster IP which has been configured with Listener.
But when I am shutdown one node, then in the other node all the resources successfully moving and cluster able to online all the resources. I guess at that time Quorum is also moving and thus cluster can able to make Listener online.
Please suggest how to resolve this issue. Means how can I make Listener up instead having any dependencies with Quorum in the fail over node?
Thanks a lot for your help.hello
I was going through your post and i am also doing the same thing here at our organisation for Oracle 10g R2
Can you pls send me any docs u r having for configuration of Oracle in windows clusters .
And, can you pls elaborate on this point
e)Create Oracle Service with the same name in the 2nd node and copy all the files like spfile,tnsnames.ora,listener.ora,password file to Node2.
Pls send me the details at [email protected] or you can contact me at 08054641476.
Thanks in advance.
Maybe you are looking for
-
Exception of type java.lang.UnsatisfiedLinkError was thrown Anyone ?
We are getting this exception when trying to run a very basic aspx. This project works across several other servers, after bringing a new server online, we are finding we get this exception. Below is the complete response from tcptrace. HTTP/1.1 500
-
How do I get rid of the white background in text boxes in Dreamweaver?
I use a lot of reversed text on my site, and not being able to see the text in the split view means I have to edit in the code view slows me down no end- I've tried changing the obvious view options, but can never seem to find the one that makes the
-
I recently picked up a (to my knowledge) 1st generation Macbook. According to the seller he told me it was a late 2007 model but after more research and some friends on another forum I found out it is an early 2006 model. I have never used anything A
-
Organize Bookmarks is gone from my Bookmarks section on toolbar. How do I get it back?
I had to reload my Mac operating system recently. After that I downloaded Firefox 4.0. It doesn't have under the Bookmarks section "Organize Bookmarks" any more in the drop down. How do I get it back?
-
Updating Detail Block when Master Block Updates
Using scott/tiger: I have Dept in Master and EMP in detail on Form6i. The relation is made as dept.deptno=emp.deptno. When I change the first record of Dept (I changed deptno=10 to deptno=11), I don't get changes of detail block. I just want to have