When trying to update firmware on nano 3rd gen i get error -23

What is error -23 i can't seam to find anything about this... its really anoying as my ipod wont update firmware or restore... have tried deleting itunes and reinstalling etc.. even attempted on a different pc without itunes installed, IE installed itunes but still same error when trying to update to new firmware.... could someone please help me with this anoying issue.
Cheers

I just tried redownloading from itunes and installing and I got a messages saying installation was successful, but then right after that I got the following error message:  iTunes was not installed correctly.  Please reinstall iTunes  Error 7 (Windows error 127)
Any thoughts?

Similar Messages

  • When trying to update my Iphone ios version I got an error message saying I`m not connected to the internet even though I`m connected

    Hi
    when trying to update my Iphone ios version I got an error message saying I`m not connected to the internet even though I`m connected
    thanks

    Hi there ramerr,
    You may find the troubleshooting steps in the article below helpful.
    iTunes for Windows: iTunes can't contact the iPhone, iPad, or iPod software update server
    http://support.apple.com/kb/ts1814
    -Griff W. 

  • When trying to update Acrobat XI I get a 1328 error each time. I have uninstalled XI and reinstalled it from disk. When trying to update the newly installed XI I still get the 1328 error. I have searched my C: drive for the file C:\config\Msi\PTA082.tmp b

    When trying to update Acrobat XI I get a 1328 error each time. I have uninstalled XI and reinstalled it from disk. When trying to update the newly installed XI I still get the 1328 error. I have searched my C: drive for the file C:\config\Msi\PTA082.tmp but with no sucess. Any suggestions?

    Hi Berriedale,
    Please try the below steps and check.
    Turn off any antivirus or software security program.
    Download the update patch 11.0.10 manually from the below link and run it.
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=5859
    Regards,
    Anand

  • When connect ipod nano 6th gen i get error message "you need to format the disk in drive G: before you can use it Do you want to format it?"

    when connect ipod nano 6th gen i get error message "you need to format the disk in drive G: before you can use it Do you want to format it?" Any suggestions please

    Hi Michael
    These are the answers
     to your questions
    What is the OS version, Windows Server 2008?   
    Microsoft Windows [Version 6.0.6001]  
    SP1
     On which disk you choose to install it, the C: drive? 
    I have Raid 5
    What
    is the output of the Checkdsk?   It find Nothing
    Could
    you please upload us a screen shot?  I have no 
    Screen shot
    Is
    the C: drive is a external drive?  NO
    Besides,
    have you manually assigned the drive letter? 
    NO
    Thanks

  • When trying to link to download an epub book I get - error! check activate.

    When trying to link to download an epub book I get error! check activate. I have authorised the PC running windows 7 and apparently it can communicate with teh adobe server. I have tried uninstalling and reinstalling - to no avail. Anyone any ideas. There seems to be no adobe help available on this.
    HG

    For this problem, you need to deauthorize and authorize ADE again.
    Launch ADE
    Help -> Erase authorization.
    ADE will be deauhorized.
    Now again AUTHORIZE ADE
    Help-> authorize computer.
    Error will be fixed !!

  • Im trying to update my iphone 3g and i keep getting error 1015 that its unable to restore it what can i do ive been trying for 3 days now

    im trying to update my iphone 3g and i keep getting error 1015 that its unable to restore it what can i do ive been trying for 3 days now

    See Here...
    https://discussions.apple.com/message/15341923#15341923
    From the  More Like This  on the right...

  • I'm trying to update to OS 5.1 and keep getting error 1...

    I've been trying to update to OS 5.1 and keep getting "error 1...".
    Please...anybody?

    I am having the same issue. It doesn't go above the 870 MB. I was able to download Yosemite on my Mac Book Air.
    Can anyone help?

  • When trying to run CS5 (64 bit) on Windows 7 get error failed to initlialize COOLTYPE ?

    Hello,
    When trying to run CS5 (64 bit) on Windows 7 get error failed to initlialize COOLTYPE ?
    Any ideas ?
    I tried re-installing CS5 Master collection but that failed as well.
    Running out of ideas
    Richard

    I have the same problem, and while I can 'fix' it with the approach described here, I have to 'fix' it that way EVERY TIME I launch itunes.  I suppose the lousy support for mainstream computers is apple's way of saying, 'well of course you can't use your phone, you're not living in a (TM) apple home (TM) please sell your existing home and purchase one from apple if you want your phone to work.'  I never would have imagined that as a computer programmer it would be a multi-hour/failed installation process to get iTunes and the iPhone4 working properly.  What a joke.

  • HT201210 I'M TRYING TO UPDATE TO IOS 6 BUT I KEEP GETTING ERROR MESSAGE sOFTWARE UPDATE fAILED: AN ERROR OCCURRED DOWNLOADING IOS 6

    I'M TRYING TO UPDATE TO IOS 6 BUT I KEEP GETTING ERROR MESSAGE sOFTWARE UPDATE fAILED: AN ERROR OCCURRED DOWNLOADING IOS 6

    I Tried for three days to download iOS 6 and kept getting error 1403. I finally went to the apple store and they couldn't figure it out either.
      I finally got it to download and all I did different from the other 100 times was I went into settings and on the Bluetooth setting I put NO.  Not sure if that's what did it but that was the only thing different that I did.

  • Error 6 when trying to update firmware

    Getting Error 6 when trying to update firmware

    Probably no need for concern, but it would be a good idea to run the update again, just in case everything did not "stick".
    Always connect your Mac using an Ethernet cable to one of the LAN <-> ports on the Time Capsule whenever you do an update....if at all possbile.
    Once the update is done, you can disconnect the Ethernet cable.

  • Am trying to sync my ipod nano 7th gen. i get this message: not enough access privileges."

    i am trying to sync my ipod nano 7th gen with my music on the cloud, via a desktop PC.
    I have successfully done this in the past.
    now I am getting a series of messages: "not enough access privileges"
    have reset the nano and also downloaded latest iTunes software.
    Any suggestions?

    Hi,
    I'm having a very similar problem, so I was excited to see the link above. But when I click on it, it redirects me to the nike.com main website (I'm assuming Nike redid their website since the above link was posted). Could you please point me to that article somewhere else or tell me how you fixed your problem?
    My exact problem is this: I was running until recently with my iPod Nano 6th gen and the Nike+ sensor kit (sensor that goes in the Nike+ shoe plus receiver that goes in the iPod Nano). When I would sync my Nano with iTunes (I would have the "Automatically send workout data to nikeplus.com" option checked), all was well with this set-up as far as syncing my stuff to the Nike+ website goes.
    I recently realized that for the iPod Nano 6th generation, the sensor/receiver combo is not required anymore. So I ran two runs without the receiver. I kept the sensor in the shoe though as nowadays I mostly run with my recently purchased Nike+ Sport GPS watch and I like to have the sensor in the shoe in case the GPS signal gets lost at some point during a run. Anyway, those two runs that I ran without the receiver won't sync to my nikeplus account. I can see them in my iPod Nano's history and I can see one of them (the latest one) on the Nike + iPod tab of iTunes when I sync my Nano. The difference though is that on iTunes this latest run appears under a "Sensor 1" selection, whereas all my previous runs with both the sensor and receiver would be under "Nike + Sensor" selection. Within the "Nike + Sensor" selection, under nikeplus.com, there's the "Automatically send workout data to nikeplus.com" option and below it a Login ID that shows my Nike+ website log-in info. Within the "Sensor 1" selection, the Login ID is missing. I've tried renaming "Sensor 1" to something else but it didn't make the Login ID appear.
    Thank you for reading this and any help would be greatly appreciated.
    Best,
    Dimitris.

  • TS1424 When trying to download prior purchases on ITunes, I keep getting error 3131. What does this mean? I can't find what this error means.

    When trying to download purchase music from ITunes, I keep getting that it can't because of error 3131. What does this mean?

    Must be a temporary glitch...seems to be up and running again.

  • Error 10057 when trying to update firmware

    I get notifications that I need to update the firmware on my Airport Express. When I select "Update" I get a message that "An error occurred while trying to access the Apple wireless device. Make sure your network connection is valid and try again". In the lower left corner of the window it says "Error 10057" Anyone else seen this problem?

    This problem tends to happen on windows machines...
    Does this link help?
    Airport configuration error 10057 and Microsoft TCPIP reset
    https://discussions.apple.com/thread/3289924?start=0&tstart=0

  • Can't update firmware on iPad 3rd Gen (GSM) 6.0.1

    I received an iPad 3rd gen (gsm) for my birthday from my sister in law, who works at Apple (this will come into play). The firmware is 6.0.1 and I am unable to update to the latest firmware. I have tried using iTunes and OTA and i get the generic error "Not eligible for this build." (device is not jailbroken)
    I have used four different cables and three different computers (the ota issue kind of makes this a redundant check but I tried just to be safe)
    I have deleted and redownloaded the firmware via Apple/iTunes and even finding the update and trying to manually update or restore via the ispw file.
    I have also tried the hosts file method (adding a # before the apple line and also deleting the line completely and every other combination of adding lines and such).
    I am able to restore on the device itself and that does not change my outcome when I try to update. What I think might be the issue (that I found out today) is that the iPad used to have a "Development" sticker on it. When I try to enter in the serial number into the support page it says the serial number does not exist. I have no idea where to go from here.
    Any suggestions? (unfortunately I live an hour and half from an apple store and I'd like to try and fix it myself first)

    She has no idea on what to do as she isnt a developer (I'm not going to disclose her exact position).
    I've tried to reset the content and settings and it restores it to factory default but it unfortunately still gives me the error. I'm going to try and install a beta version of ios 8 (thats still signed by apple) and see if that may work.
    I'm debating on bring it into the apple store or not as that may be my only option.

  • HT4972 I keep getting an error when trying to update my ipad software to IOS5. The error is a Network timeout error when in fact my connection to the internet is stable and strong. Any suggestions?

    I've tried to update my ipad softward to the new IOS 5 software but keep getting internet connection errors.
    Initially, I thought it was related to my internet connection but I've tried with full connection and still getting the same error.
    Any suggestions would be a great help.
    PS - from South Africa

    Thanks King_Penguin - I've disabled both my firewall and antivirus software to no avail.
    Any other suggestions?
    Using Windows Vista - not sure if that make any difference???

Maybe you are looking for

  • Error while running report..

    Hi, We use 9iAS on linux and while running one report , we get this error: REP-0177: Error while running in remote server REP-300: date format is too long for internal buffer (sign(decode( ==> trunc(imp.tnr_matu_date), When i run the same report on m

  • Signing a PDF file

    Hi all. I want to sign a pdf file. 1.- u2019ve generated the PSE file in my system and Iu2019ve validated it. Iu2019ve inserted my certificate in the pse file. 2.- Iu2019ve created a program how converts a spool to PDF format (FM CONVERT_OTFSPOOLJOB_

  • Protocol Error: Unknown error. (1)

    I have a Centro (sprint) which  has been giving me lots of problems. i want to focus at 1 the issue now. I restored each database separately and it gave me the same error "protocol error: unknown error (1)" Then i back up with nothing checked off to

  • Jsp to pdf?

    does anyone know of any libraries that generate jsp to pdf (the generated HTML and theres no intermediate XML)

  • Filter data by cross validation rules

    Hi all, Is there any way to build report that filter out data by cross validation rules ? For e.g: Acc. Flex -> Company.CC.Natural.Future. The cross validation rules are excluding CC -> 01 and 05. So all the combination_id that contains CC 01 and 05