When trying to update the i phone " fault 1630" occurs - both when connected to WLAN or USB. What can I do?

When trying to update my i phone IOS 5.0 (connected by WLAN and USB to my computer) there is always "fault 1630" saying I`ve got no connection to the internet / network, which seems to be wrong to me (phone is online). What can I do?

C Mawle wrote:
Thanks. I have followed all the instructions as recommended and nothing has worked so it looks like the restore/update may have been interrupted - would loss of internet connection do this?
Yes it would, possibly even brick it.
Have successfully connected my ipod nano with iTunes so looks like the device driver is working.
Can I use my ipod nano USB connector to check?
It is not much help to you, since the device that you need still not recognized.
Anyway looks like I may have to swallow the loss of data. Have set-up a call for tomorrow with Apple support so will wait until after this before doing the factory restore!
Good luck, but if you expect miracle from that call good luck again.

Similar Messages

Tried to update the dinosaur iPhone 4, doesn't go past Connect to iTunes

I've got an older iPhone 4, and up until today it had iOS 4.2.1. Yikes, I know! I backed up my contacts and pictures to my computer before I did anything.
First thing I did was update iTunes since it was outdated as well. I plugged my iPhone in the usb port and did the update via iTunes. The update did its thing then gave me the option to use a backup.
At that time I had the Hello screen, wifi selection and the works. It prompted me to start like a new iPhone, restore using iCloud, or restore using iTunes. I chose iTunes because I never used iCloud before. After selecting the proper backup, iTunes says everything synced, has the current iOS as 7.1.2, and I can view how the screen looks via Apps on the top bar.
Seems like everything went smooth, yet the screen on my iPhone doesn't change. I can turn it off/on, touchscreen works when I swipe at the Hello screen, but it still says "Connect to iTunes."
If I try to manually restore backup, it says I need to go on my phone and turn off something related to Find My iPhone. That's difficult to do since I can't access it.
I'm currently trying my 2nd restore, after putting it in recovery mode, in hopes that it works this time. I haven't received any error messages, yet.
I'm curious as to if I restore it like a new iPhone, would I be able to use my current backups if it goes past the Connect to iTunes screen?
Does anyone have any suggestions on what to do, or how to get it off this dang connect to iTunes screen?
I do appreciate any help, thanks!

I solved my own problem. Hopefully this will help someone else.
I did a DFU restore, then started it up as a new phone on iTunes. Everything loaded properly, then from iTunes did a restore from backup, selected the one I wanted and it still took me to the same screen with 3 options of restore. I chose the start up as new phone from the actual phone and after all the syncing was completed, my phone is back in working order.

TS1368 Why when I want to update my apps , it said that my iPad cannot connect to iTunes Store . What can I do?

When I want to update my apps , it said that my iPad cannot connect to the iTunes Store . I don't know what happen to it . Last time I accidentally click Chang To US Store , but my own country is Malaysia . What can I do to update the apps ? Help me plssssssssss . Thankyou

Then you need to change the store that you bought the apps from - correct?
Go to the featured tab of the App Store and tap on your ID at the bottom. Tap View Apple ID. Enter your password. Go to Country/Region and change it to the correct store.

TS3694 I tried updating my iPhone with the latest update. It downloads the update to my computer fine, but when it tries to update the phone, I keep getting a fault code of 3014. I've tried it four times.

I tried updating my iPhone with the latest update. It downloads the update to my computer fine, but when it tries to update the phone, I keep getting a fault code of 3014. I've tried it four times.

Try taking it to the nearest Apple Store. They should have computers there that they can use to get your iPhone out of recovery mode. Make an appointment first.

I tried to update the software overnight, and it was still in the beginning stages of the progress bar when I woke up. When I restarted the process I have to restore the phone, its again stuck in the beginning of the process. Does anyone know how long th

I tried to update the software overnight, and it was still in the beginning stages of the progress bar when I woke up. When I restarted the process I have to restore the phone, its again stuck in the beginning of the process. Does anyone know how long this should take? The beginning sections seemed to fly by.

Hi NWL1,
Thanks for the question. If I understand correctly, the iPhone won't update and is stuck. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
Thanks for using Apple Support Communities.
Have a great day,
Mario

HT4839 PLEASE HELP!!! I am simply trying to update the APN settings on my Iphone3 AT&T carried Straight Talk SIM phone. For some reason, when I enter the Straight Talk APN info in the Config Utility and click "Install", NOTHING HAPPENS. WHY?

PLEASE HELP!!! I am simply trying to update the APN settings on my Iphone3 AT&T carried Straight Talk SIM phone. For some reason, when I enter the Straight Talk APN info in the Config Utility and click "Install", NOTHING HAPPENS. WHY? I have spent almost 2 full days simply trying to get the cellular data network settings to appear and I am now at the point of pulling hair and/or smashing things. Why is it so difficult to simply update the cellular data network APN settings on a standard Iphone 3 ATT with a unlimited Straight Talk plan? Everyone knows that Straight Talk's $45 a month unlimited data/calling plan is supposed to be 100% compatible with AT&T carried Iphones. Will someone please tell me HOW TO UPDATE THE APN SETTINGS ON THIS IPHONE 3. Thanks and God bless
<Personal Information Edited by Host>

StraightTalk is not a supported carrier.
Contact them for support.
FYI, unless the device is officially unlocked from AT&T, you will not be able to use it on another carrier.

Received notice of an update for one of my apps and when I tried to update the message reads "Account Not in this store" i must switch to a Canadian store before purchasing

Received notice of an update for one of my apps and when I tried to update the message reads "Account Not in this store" i must switch to a Canadian store before purchasing. I deleted app and tried to download again but still got the message. Anyone know how to fix? FYI have had phone for 2 years and this is the first time this has happened.

The Apple id that you created do you remember if you created with your region sellected as Canada or US. If so you can change Region directly on your device by clicking on App Store icon, Scroll to bottom and tap your app is, click view acct and change region

I have a 3gs. I tried to update the ios today. Now my phone is stuck in recovery mode and itunes is not recognizing. I also tried DFU mode, still nothing. I have uninstalled itunes and reinstalled. Help.

I have a 3gs, and I haven't updated it for a long time because I always have issues when I do. I tried to update the ios today, and it decided to update it to 6.1.3 instead of 7, I didn't think there would be a problem, so I clicked ok. When I came to check on my phone, itunes said there was an error with the update, and my phone was in recovery mode (plug-in sign on the screen). I looked up multiple things to try, I tried putting it in DFU mode, still itunes doesn't see it. The computer also doesn't list it under devices, however when it is plugged in the Apple Mobile Support USB Driver shows up in device manager. I have tried uninstalling itunes and reinstalling, still nothing. I just want to know if there is anything else I can try. Thanks.

No, it is my phone that I've had since 2009. I just hate updating it because every time I do something goes wrong. So I put it off as long as possible. I am getting a new iphone, but I read that to have your backup transfer to the new phone, it must be a backup from the current ios.

I had my iphone 4 locked to vodafone uk carrier. I connected the phone to itunes on my pc and tried to update the version to ios 6 through itunes. But it has been locked and asks for sim of previous carrier. how can i return to previous state?

I had my iphone 4 locked to vodafone uk carrier. I connected the phone to itunes on my pc and tried to update the version to ios 6 through itunes. But it has been locked and asks for sim of previous carrier. how can i return to previous state?

You cannot return to previous state. The update re-locked the iPhone
to the original carrier. You must contact the original carrier to see if
they offer unlocking and if you qualify.
What does it say when you look at Settings=>General=>Carrier?
Be advised that if your iPhone had previously been hacked/modified/
jailbroken to work with other than original carrier, it may be impossible
for the original carrier to unlock it properly.

HT4623 hi..i just bought an iphone 5 yesterday 32GB..and now when i am trying to update the software..it says the following: unable to check for update/an error occurred while cheking for a software update...please help me..is it a problem in my new iphon

hi..i just bought an iphone 5 yesterday 32GB..and now when i am trying to update the software..it says the following: unable to check for update/an error occurred while cheking for a software update...please help me..is it a problem in my new iphone??or it's just an temporary error in the apple software center???

Lyndsay237 wrote:
This device does not have a sim card in it. Could this be the reason or am I missing something when I am trying to update.
Yes. You can't update or restore any GSM iPhone without a valid sim card installed in the phone. The sim card need not be activated, but it must be valid & present. If you want to update, you need to get a sim card.

TS1702 I had deleted my Apps Icon from the phone as I was trying to update the new version iOS4.3. However, after deleteing the Icon, I am not able to install the Apps Messenger again because I am not able to use the IOS.4.3 diagnostic password sent via e

I had deleted my Apps Icon from the phone as I was trying to update the new version iOS4.3.
However, after deleteing the Icon, I am not able to install the Apps Messenger again because I am not able to use the IOS.4.3 diagnostic password sent via email.
Installation was rejected because I need the iOS.4.3
Thanks for your help
Michael

That situation went from inconvenient to complicated quickly. Wait for any pending orders to drop off, wait for things to clear up, wait till your upgrade comes up and then upgrade when your contract is fulfilled. I would have suggested a replacement phone, I know, with only a month left why couldn't you just upgrade early, but these situations where people try to upgrade early always end horribly and once a phone order starts, it almost cannot finish until something winds up shipped received and returned. Sorry this happened the way it did. Definitely not efficient.

HT1386 my iphone 4 is stuck on an itune emblem when I tryed to update the ios 7 update.

my iphone 4 is frozen on the itune emblem when I tryed to update the ios 7 software I had downloaded a few days ago. How can I unfreeze my phone?

1) Connect to iTunes on the computer you usually Sync with and Restore
http://support.apple.com/kb/HT1414
2) If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/HT1808
Note on Recovery Mode.
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most Recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
NOTE:
Make sure you have the Latest Version of iTunes Installed on your computer ( v 11.1)
iTunes free download from www.itunes.com/download

Getting error message when i am trying to update the excel file using script task in ssis package

Hi Guys,
I am getting error message when I am trying to update the excel. Please find the error messages as below
Error at Update File [Update File]: Failed to compiled scripts contained in the package. Open the package in SSIS Designer and resolve the compilation errors.
Error at Update File [Update File]: BC30002 - Type 'Microsoft.Office.Interop.Excel.Application' is not defined., ScriptMain.vb, 32, 32
Error at Update File [Update File]: BC30002 - Type 'Microsoft.Office.Interop.Excel.Workbook' is not defined., ScriptMain.vb, 33, 25
Error at Update File [Update File]: The binary code for the script is not found. Please open the script in the designer by clicking Edit Script button and make sure it builds successfully.
Warning at Update File [Update File]: Found SQL Server Integration Services 2008 Script Task "ST_050fcae972904039b4f0fe59b7528ece" that requires migration!
and the code that   I am using is
Dell - Internal Use - Confidential
' Microsoft SQL Server Integration Services Script Task
' Write scripts using Microsoft Visual Basic
' The ScriptMain class is the entry point of the Script Task.
Imports System
Imports System.Data
Imports System.Math
Imports Microsoft.SqlServer.Dts.Runtime
Imports Microsoft.Office.Interop.Excel
<System.AddIn.AddIn("ScriptMain", Version:="1.0", Publisher:="",
Description:="")> _
<System.CLSCompliantAttribute(False)> _
Partial
Public Class ScriptMain
Inherits Microsoft.SqlServer.Dts.Tasks.ScriptTask.VSTARTScriptObjectModelBase
Enum ScriptResults
            Success = Microsoft.SqlServer.Dts.Runtime.DTSExecResult.Success
Failure = Microsoft.SqlServer.Dts.Runtime.DTSExecResult.Failure
End Enum
Public Sub Main()
        Dts.TaskResult = ScriptResults.Success
'Dim proc As System.Diagnostics.Process
'kill all instances of excel
'For Each proc In System.Diagnostics.Process.GetProcessesByName("EXCEL")
' proc.Kill()
'Next
Dim excelnacomm As
New Microsoft.Office.Interop.Excel.Application
Dim wbnacomm As Microsoft.Office.Interop.Excel.Workbook
        wbnacomm = excelnacomm.Workbooks.Open("http://test.xlsx")(renamed
the excel)
        wbnacomm.RefreshAll()
        wbnacomm.Save()
        wbnacomm.Close()
        excelnacomm.Quit()
        Runtime.InteropServices.Marshal.ReleaseComObject(excelnacomm)
End Sub
End
Class
Please let me know what could be the reason
Smash126

Download:
Microsoft Office 2010: Primary Interop Assemblies Redistributable
How to: Add or Remove References By Using the Add Reference Dialog Box / How to:
Add and Remove References in Visual Studio (C#)
Olaf Helper
[ Blog] [ Xing] [ MVP]

How do I enable my iTouch? I am trying to update the apps but when I click "Update All", a pop up "Your Apple ID has been disabled." How do I change it so I can enable my iTouch? Thanks.

How do I enable my iPod? I am trying to update the apps but when I click "Update All", a pop up "Your Apple ID has been disabled." How do I change it so I can enable my iPod? My iPod is not locked (I know my password), but I just can't figure out how to enable it. Thanks.

This may help:
http://support.apple.com/kb/ts2446

I got this iphone from a guy and everytime i tried to update the applications stored in this phone it keeps asking me the password that the guy used to use, even thou i created a new apple ID of my own and updated the account of icloud and everything in t

I got this iphone from a guy and everytime i tried to update the applications stored in this phone it keeps asking me the password that the guy used to use, even thou i created a new apple ID of my own and updated the account of icloud and everything in this iphone with the new apple ID, it still asks me the password of the account that the guy used to use whenever i tried to update the applications, and i cant find the guy who gave me this iphone...wt should i do???

Apps are permanently tied to the AppleID that downloaded them and cannot be transferred to another. Best thing to do is delete the apps and download those you want or need under your AppleID.

When trying to update the i phone " fault 1630" occurs - both when connected to WLAN or USB. What can I do?

Similar Messages

Maybe you are looking for