When trying to update to new iOS my iPad freezes after I agree to Terms and Conditions

Why does my iPad freeze after I agree to the terms and conditions when trying to update to new iOS

I have no clue but I would wait several hours and then try again.  I could be wrong but it's harmless.

Similar Messages

  • HT201210 backup cant be saved to computer when trying to update to new iOS

    Can anyone advise what i can do please.
    I have an iPhone 4s and am trying to update to iOS 5.1.1.
    Firstly i had error 3194 and so updated iTunes to the newest version and now after extracting updating software and attempting to backup the phone to my computer the upgrade process stops and says its unable to backup Iphone to computer. i have disabled virus software in case this is the problem and restarted computer several time but with no joy. the iphone has had no problems syncing.
    I am running Windows 7 on the PC.
    Any suggestions greatly appreciated.
    Vetti

    Try this links for error 3194 fix:
    http://osxdaily.com/2010/12/06/error-3194-fix-for-itunes/
    http://www.iphonestuffs4u.com/iphone-error-3194/

  • Tried to updated to new ios 6.1 but the prep file failed in itunes...now my iphone4s is stuck on the screen to connect usb to itunes BUT nothhing happens when connected. HELP HELP

    tried to updated to new ios 6.1 but the prep file failed in itunes...now my iphone4s is stuck on the screen to connect usb to itunes BUT nothing happens when connected. HELP HELP
    I tired reboot the phone and placing the DFU BUT still the phone reverts back to itunes logo and ucb connection sceen

    Place the device in DFU mode, connect to the computer and restore.

  • When trying to update my Iphone ios version I got an error message saying I`m not connected to the internet even though I`m connected

    Hi
    when trying to update my Iphone ios version I got an error message saying I`m not connected to the internet even though I`m connected
    thanks

    Hi there ramerr,
    You may find the troubleshooting steps in the article below helpful.
    iTunes for Windows: iTunes can't contact the iPhone, iPad, or iPod software update server
    http://support.apple.com/kb/ts1814
    -Griff W. 

  • My ipad air blocked when trying to update the new software

    my ipad air blocked when trying to update the new software

    What do you mean by blocked?
    What do you see on your iPad's screen?
    ~Lyssa

  • I updated my Iphone 5 to iOS7 but during setup when i agree to 'Terms and Conditions', its not going to any other screen, it seems as if its going in some infinite loop. Please assist what to do in that case ?

    I updated my Iphone 5 to iOS7 but during setup when i agree to 'Terms and Conditions', its not going to any other screen, it seems as if its going in some infinite loop. Please assist what to do in that case ?

    I am having a really wierd issue as well that is probally related. I dont see 95% of the album artwork associated with my music. Also, it seems as if this has gotten worse since I started using that match feature

  • Why does my i cloud keeps asking me to sign in and agree the term and conditions every 10 minutes since installing iOS 7

    After installing ios 7 my phone keeps asking me to enter my apple id for icloud i put it in then agree the terms and conditions then 10 minutes later the same thing happens. Have tried to reset the password and it still happens

    Wow, no replies?
    So now when I bring up Creative Cloud and fill out sign-in (Adobe ID and password), I just get the spinning wheel ... left it for 30 minutes and it just keeps spinning.
    I'm sorry but this CC subscription process just isn't working and it's clearly NOT been tested.
    I see many other threads of people having exactly the same problem, any solution?
    Rob

  • Was forced to install Adobe again (maybe just update it) and can't get past step 3/3 because its forcing me to buy it. now its half installed and i need to agree to terms and conditions..

    was forced to install Adobe again (maybe just update it) and can't get past step 3/3 because its forcing me to buy it. now its half installed and i need to agree to terms and conditions..

    Let's start with what you are trying to install. Adobe Reader is free, so it won't be forcing you to buy anything. So
    - What are you trying to install (full name, please, Adobe make lots of things)
    - What system (e.g. Windows 7, Mac OS Lion, iPad...)
    - Where do you go (what web address) to start off?
    - Why were you "forced" to do this?

  • I've downloaded movies from the iTunes store to my iPad but when I want to play them, I get the message... iTunes Store Terms and Conditions but when I follow the link it still doesn't let me play my movies. What am I doing wrong?

    I've downloaded movies from the iTunes store to my iPad but when I want to play them, I get the message... iTunes Store Terms and Conditions... but when I follow the link it still doesn't let me play my movies. What am I doing wrong?

    Easy maybe, but a lot of users are used to playing the movies in iTunes on their computers so that is the first place they turn to on the iPad.
    Enjoy the show!

  • Mac will not advance past "Optimizing you Mac" when loading Yosemite.  Have to go through set up, agree to terms and conditions, keychain, etc.. everytime I start my Mac.

    Having issues with Yosemite.  Every time I reboot my Mac I have to go through and agree to terms and conditions, setting up keychain, etc... It states that it is optimizing, but the bar which appears under the launchpad icon never moves.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Trouble agreeing to Terms and Conditions for new iMac

    I have just finished migrating my files from my old iMac to my new iMac. On the screen of my new iMac is a window requesting me to agree to Terms and Conditions. I have a Trackpad. I do not see my cursor. I have not found a combination of typing that enable me to continue. How can I accept or continue without a cursor to click on "continue"?

    You have 90 days of free AppleCare telephone support, seems like the perfect time to call. You can find the number in your part of the world at AppleCare Contact Info

  • When trying to update itouch to ios 5.1, mine is (4.3.5), i clicked the update button and then it says backing up __ ipod. i already backed up and this takes several hours! HELP ME PLEASE!

    My ipod touch version (4.3.5) has a problem. When trying to update my device to ios 5.1, i backed up my device and clicked "Update." but when i did, several pop ups appeared and i clicked yes or continue, but no cancel. Then, when the pop ups stopped, something else popped up and it says"backing up ____'s ipod" but that took like 5-12 hous to complete! And when it finally finishes, nothing happens. My ipod is the same, and nothing has changed. Am i doing something wrong? please help me! By the way i am using a pc not a mac. And now my ipod touch just says "Sync In Progress" And in the slide to unlock it says "slide to cancel" :|

    Maybe here:
    iOS: Troubleshooting backup issues in iTunes
    To recover now, close iTunes, use the Task Manager if necessary, disconnect the iPod and reboot the computer. They try restoring the iPod.. You may have to place the iPod in Recovery Mode to allow the restore.

  • HT1349 I'm trying to download the new iOS 7.0.6 but it isn't loading and says "est time remaining". How do I cancel?

    I'm trying to download the new iOS 7.0.6 but all I get is "est time remaining" message. I want to cancel but don't know how.

    Hello, Rpodol5678. 
    Thank you for visiting Apple Support Communities.
    The download times can vary depending Wi-Fi download speed and device space.  The best option would be to download and install the update via iTunes on a computer.  Here is some helpful information regarding updating your device.
    Update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/ht4623
    Cheers,
    Jason H.

  • I keep getting Error 17 when trying to update to 7.0.4 iPad Air

    I keep getting Error 17 when trying to update to 7.0.4 and the Ipad stays in USB Mode

    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    Update and restore alert messages on iPhone, iPad, and iPod touch
    http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
     Cheers, Tom
    Check for hardware issues
    Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the alert when you update or restore, contact Apple support.
    Common errors: 1, 10-47, 1002, 1011, 1012, 1014, 1000-1020.
    Message was edited by: Texas Mac Man

  • I cannot install update of iOS 8.1.1. It is downloaded, but when I launch installation it freezes after agreeing the terms and conditions

    i cannot install update for iOS 8.1.1
    it freezes after I click that I agree with the terms and conditions.
    same happened for iOS 8.1
    i restarted several times the iPad but nothing changed

    Had the same issue... Saw post on another thread.. you have to be conencted to the internet AND logged into your iCloud account.
    Once I logged into iCloud, all worked...
    Kev.

Maybe you are looking for

  • Interactive Report - Saved Filter

    Have an Interactive Report which will include a column which containing the email address of an employee and would like to create a saved filter on the report to filter on this column and reference the currently logged in users username. Owner =APEX_

  • Primary Key Error

    I imported some tables from a CSV file. When I imported, I chose to use the original Primary Key and generated a new sequence for the primary key's trigger. Now, Whenever I use the forms to add a new record to the table, I get the following error mes

  • VB6 INSERT QUERY

    Hi, Can anyone give me the correct method for inserting a record into an access 2010 db? I have the connection details but not sure how to execute the actual query. Dim cmd As New ADODB.Command     'Dim cat As New ADOX.Catalog     'Dim dbpath As Stri

  • Selection formula

    hi i am using labview 8.2,for report genertaion i am using crystal report . i am using selection formula to display datas from database  in crystal report . i am not able display the odata in ascending order 1. order by sql syntax  is not working 2. 

  • BP Salesperson Update

    Hi All I'm trying to update the Salesperson on the Business Partner record using the DI-API version 2004A patch36. The code runs with no error but when I look at the Business Partner record the salesperson code is not changed. Can anyone help me with