When trying to work with Agilent 34401A multimeter (serial RS-232 connection), HP34401A Getting Started.vi gives always the message: "Error 1073807369 occurred at Old VISA Open ".
Baud rate and parity are set correctly, RS-232 cable is also connected correctly. My QuickBasic program has no problems to read and write to the Multimeter. It is obviously a software problem: the same error is persistent if I disconnect RS-232 cable.
I downloaded NI-VISA 2.6 for Windows 95/98/NT/ME/2000/XP frorm digital.ni.com and installed it. But it did not help.
Thank you in advance
Best regards
Alexei Soloviev
Hi Steve
I have problems with the 34401A and serial communication. Do you remember
where the error was in the code ?
Thanks
Klaus
wrote in message
news:[email protected]..
> Alexei,
> This may or may not help, I was tasked to do something similar
> recently and found an error in their driver. The GPIB VISA worked
> fine, but when I tried it on serial it played up. There was an errant
> carriage return (or CR/LF I can't remember). GPIB liked one and Serial
> liked the other. It always amuses me that we never have problems with
> Quickbasic!.
> If you want me to dig deeper give me a shout.
>
> Steve Watts
>
> On Thu, 24 Jan 2002 06:16:55 -0800 (PST), "Alexei V. Soloviev"
> wrote:
>
> >When trying
to work with Agilent 34401A multimeter (serial RS-232
> >connection), HP34401A Getting Started.vi gives always the message:
> >"Error 1073807369 occurred at Old VISA Open ".
> >
> >Baud rate and parity are set correctly, RS-232 cable is also connected
> >correctly. My QuickBasic program has no problems to read and write to
> >the Multimeter. It is obviously a software problem: the same error is
> >persistent if I disconnect RS-232 cable.
> > I downloaded NI-VISA 2.6 for Windows 95/98/NT/ME/2000/XP frorm
> > digital.ni.com and installed it. But it did not help.
> >Thank you in advance
> >Best regards
> >Alexei Soloviev
>
Similar Messages
-
My ipad says it is connected to WiFi, which is workingly perfectly for several other devices, will not connect to internet. It keeps giving the message 'Cannot Connect' or error has occurred or just blink off site or icon?
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
I recently purchased a new computer with Windows 7 OS. When trying to learn the transition experience from Windows XP to this new OS version, I was presented with this problem of going around in circles.
When trying to view "Discover Windows 7" via "Start>Getting Started>Discover Windows 7", a Microsoft website opens to; (http://windows.microsoft.com/en-US/windows7/help/videos/personalizing-your-pc). It tells me; To view this contents, please install Microsoft Silverlight. Once I install it and get back to this page, I get the same message. I can not view any of the help content before installing Microsoft Silverlight. So now it is a never ending "CIRCLE of LIGHT"! Is this a problem with my Firefox or with Windows Microsoft 7?I'm not seeing the Silverlight plugin in your More system details list, so Firefox doesn't find it if you have it.
I assume that you also do not see it in Tools > Add-ons > Plugins ? -
IDVD freezing when trying to work with old project
I am running iLife '09 and OS X 10.6.2. I burned this project successfully in the past 12/09 after creating it, however trying to burn and work with the project after some changes and iDVD will freeze or give me a grey screen and crash. Where can I look to see the cause of this? Crash Reporter has no logs of the events.
cheers!
JamesHi
There is a bug in iDVD'09 (at least)
If You make an iDVD project
Then go back to Your movie and make a small change
Then open iDVD again - it will notice this and say to Update or Cancel
NEITHER of them works.
ONLY one medicine - Make a brand new iDVD project and re-import Your movie.
Sorry - Non has come up with a more elegant solution. (at all)
Yours Bengt W -
Problem when tried to work with jstl
i have downloaded standard tag library and copied the
jakarta-taglibs/standard-1.0/lib file into /WEB-INF/lib as said in
http://java.about.com/od/beginningjava/l/aa_jstl_intro_2.htm
and tried to execute hamsandwhich.jsp which is as follows
<%@ taglib prefix="c" uri="http://java.sun.com/jstl/core" %>
Setting the value: "Hello World!"
<c:set var="hello" value="Hello World!"/>
<p/>
<c:out value="${hello}"/>
i get an error
org.apache.jasper.JasperException: This absolute uri (http://java.sun.com/jstl/core) cannot be resolved in either web.xml or the jar files deployed with this application
but i dont know how to check with web.xml since i dont know xml
here is my web.xml
<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE web-app
PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN"
"http://java.sun.com/dtd/web-app_2_3.dtd">
<web-app>
</web-app>someone kindly help me with this.........hi, my problem is bit diffrent.
i m trying to achieve a login procizer in JSP and using JSTL c and sql library. MySQL as database solution.
most of the things are working fine but i want to add confirm password in registeration form. and i do not know how to compare two string.<%@ taglib uri="http://java.sun.com/jsp/jstl/sql" prefix="sql" %>
<%@ taglib uri="http://java.sun.com/jsp/jstl/core" prefix="c" %>
<c:if test="${param.submitted}">
<c:if test="${empty param.name}" var="noname" />
<c:if test="${empty param.pw}" var="nopw" />
<c:if
test="${not (noname or nopw or requestScope.takenName)}">
<c:set value="${param.name}" var="name" scope="request" />
<c:set value="${param.pw}" var="pw" scope="request" />
<c:set value="${param.cpw}" var="cpW" scope="request" />
<jsp:forward page="doRegister.jsp" />
</c:if>
</c:if>
<html>
<head>
</head>
<body bgcolor="FCDBE4" >
<form method="post" name="frmRegister">
<input type="hidden" name="submitted" value="true"/>
<script type="text/javascript">
<!--
function add_onclick() {
var TRUE = new Boolean("True")
var FALSE = new Boolean("False")
blnError = FALSE
strError = "The following problems were found in your registration form: \n\n"
if (frmRegister.name.value == "")
blnError = TRUE
strError = strError + " - You must provide a Login Name\n"
if (frmRegister.pw.value == "")
blnError = TRUE
strError = strError + " - You must provide a Password\n"
if (frmRegister.cpw.value == "")
blnError = TRUE
strError = strError + " - You must confirm your Password\n"
if (frmRegister.pw.value != frmRegister.cpw.value)
blnError = TRUE
strError = strError + " - Your Password does not match\n"
if (blnError == TRUE)
strError = strError + "\nPlease correct these mistakes and try again."
alert(strError)
else
frmRegister.submit()
//-->
</SCRIPT>
<p align="left"><b> Register <hr> </p>
<p align="center"><b>Please complete the following registration form</b> <hr><br><br>
<img src="dmu.jpg" alt="DMU University" align="left">
<img src="dmu.jpg" alt="DMU University" align="right">
<table BORDER="0" ALIGN="CENTER" VALIGN="TOP" CELLPADDING=2 CELLSPACING=0>
<tr>
<td><Strong>Username</strong></td>
<td><input type="text" name="name" value="<c:out value="${param.name}" />"
/>
</td>
</tr>
<tr>
<td><Strong>Password</strong></td>
<td> <input type="password" name="pw" value="<c:out value="${param.pw}"/>"
/>
<tr>
<td><Strong>Confirm password</strong></td>
<td> <input type="password" name="cpw" value="<c:out value="${param.cpw}"/>"
/>
<tr><td>�</td>
<td><input type="submit" value="register"LANGUAGE=javascript onclick="return add_onclick()" />
</td>
</tr>
</table>
<img src="dmu.jpg" alt="DMU University" align="left">
<img src="dmu.jpg" alt="DMU University" align="right">
</form>
</body>
</html>doRegister.jsp
<%@ taglib uri="http://java.sun.com/jsp/jstl/sql" prefix="sql" %>
<%@ taglib uri="http://java.sun.com/jsp/jstl/core" prefix="c" %>
<sql:setDataSource
dataSource= "????"
scope="session"/>
<sql:transaction isolation="serializable">
<sql:query var="result" >
select username from rptable where username=?
<sql:param value="${requestScope.name}" />
</sql:query>
<sql:update>
insert into rptable(username,password) VALUES (?,?);
<sql:param value="${requestScope.name}" />
<sql:param value="${requestScope.pw}" />
</sql:update>
</sql:transaction>
<c:set var="user" scope="session" value="${requestScope.name}" />
<jsp:forward page="prelogin.jsp"/>both script is working but when i try to not confirm password still it goes to the database because i do not use anythinh which compare them ad then if yes then go inside or give a error message.
can anyone help me to do this..
thanks in advance. -
I have reset my Wi-Fi and I know my apple ID is correct Please Help!
See Here...Troubleshooting FaceTime
http://support.apple.com/kb/TS3367
FaceTime... Set Up... Use and Trouble Shooting Guide -
Agilent 34401A multimeter to PC with Labview driver via RS232
Hello!
I am trying to measure a voltage with Agilent 34401A multimeter connected to PC via RS232 cable. I installed the driver. When I am starting Read Single Measurement.vi. It gives me an error:
Error-1073807346 occured at Visa Open in Agilent 34401.lvlib: Initialize.vi->Agilent 34401 Read Single Measurement.vi
Possible reason(s):
Visa: (Hex 0xbFFF000E) The given session or object reference is invalid.
I would like to ask, how can I adjust my system to use RS23 with Agilent 34401A, if it is possible? If not, should I get GPIB card and cable?
Thank you!
Yulia.LabVIEW already comes with a driver for the 34401 pre-installed, so I'm not sure I understand what you installed. The pre-installed driver is in the Instrument I/O >> Instrument Drivers >> Agilent 34401 functions palette.
As for the control that Dennis is referring to, it's the VISA control.
As for the VISA version, you should have received a set of driver CDs along with LabVIEW. That will have the minimum VISA version required. Don't remember off the top of my head which version it is. Probably something like 4.1.
Attachments:
visa.png 42 KB -
I can't connect to the iTunes store with my Apple TV. I can see what movies are on offer but when trying to access my account i am advised "Can't connect to server" (times out).
I have the same problem with my 3rd gen Apple TV. I can preview iTunes movies, stream from my Mac, Airplay from my other devices but I cannot rent a movie on iTunes. Every time I try I get "Can't connect to ITunes" and "Unable to sign in". Had technical support review the problem over the phone and they agreed to send me a new one. Same problem. Interestingly enough my 2nd gen Apple TV works just fine.
-
Photoshop Cs6 is hanging when trying to work in 3D when it wasn't before
When I first started using 3D in Photoshop it was working rather smoothly and seemed to chug along fairly fast. Then one day when I was working in it as usual and tried to perform some random action it just started hanging with the spinning blue circle for about 2 or 3 minutes. It continued to do this ever since, sometimes hanging for up to 5 minutes before performing my command. Some actions cause it to hang longer than others, such as creating a new light and changing the diffuse color of a material, which is by far the worst in terms of the amount of time it will hang. I have searched the forums and google and tried all suggestions to any problem that seemed to have a similar nature. The only time that I had a partial success was after I had uninstalled Photoshop, then ran the adobe creative suite cleaner tool, then manually searched through the registry for every reference to adobe and Photoshop I could find and deleted them. I then reinstalled Photoshop and updated it. When I started using it in 3D after that it was running smooth as butter, no hangs or stalls on anything, including creating lights and changing diffuse colors. But my joy was not long lived, as after about 2 hours of use it started to do its usual behavior of hanging again.So I tried that approach again and it did not seem to work a second or third or fourth time. So out of desperation and all out of options, I decided to run process monitor from sysinternals to see if it showed me anything even though I knew that I probably would not understand what it were showing me. I noticed a lot of errors with the results of "name not found" for registry calls, "invalid parameter" for directory quarries, and "no such file" for file reads. But the one that seems to be happening the most whenever the program is hanging is it is trying to open a file from C:\program files\Adobe\photoshop x64\required\CgShaders, but that directory is nonexistent on my system. I was hoping that someone would be able to solve this for me as 3D in Photoshop is a big part of my workflow and I am all out of ideas. I'm going to include the process monitor log file and it will be in pml format which you will need process monitor to read, but it is a very small, portable, and free program which can be downloaded from http://technet.microsoft.com/en-us/sysinternals/bb896645. The Log file Can be downloaded from http://sdrv.ms/Xxcmuu (skydrive) or https://www.box.com/s/jzdmgmdmz7xe47smalv2 (box) .
And here is my system info from Photoshop (I have a first generation I3 processor with intel HD graphics, which as I said was running fairly smooth before my problem started):
Adobe Photoshop Version: 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00) x64
Operating System: Windows NT
Version: 6.2
System architecture: Intel CPU Family:6, Model:5, Stepping:5 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 2
Logical processor count: 4
Processor speed: 2394 MHz
Built-in memory: 7989 MB
Free memory: 3903 MB
Memory available to Photoshop: 7036 MB
Memory used by Photoshop: 65 %
Image tile size: 128K
Image cache levels: 4
The GPU Sniffer crashed on 1/22/2013 at 6:33:53 PM
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
Video Card Vendor: Intel
Video Card Renderer: Intel(R) HD Graphics
Display: 1
Display Bounds:= top: 0, left: 0, bottom: 768, right: 1280
Video Card Number: 1
Video Card: Intel(R) HD Graphics
OpenCL Unavailable
Driver Version: 8.15.10.2858
Driver Date: 20121009000000.000000-000
Video Card Driver: igdumd64.dll,igd10umd64.dll,igdumdx32,igd10umd32
Video Mode:
Video Card Caption: Intel(R) HD Graphics
Video Card Memory: 3770 MB
Video Rect Texture Size: 8192
Serial number: Tryout Version
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\
Temporary file path: C:\Users\RYANS_~1\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
C:\, 341.9G, 102.3G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Required\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Plug-ins\
Additional Plug-ins folder: not set
Installed components:
A3DLIBS.dll A3DLIB Dynamic Link Library 9.2.0.112
ACE.dll ACE 2012/06/05-15:16:32 66.507768 66.507768
adbeape.dll Adobe APE 2012/01/25-10:04:55 66.1025012 66.1025012
AdobeLinguistic.dll Adobe Linguisitc Library 6.0.0
AdobeOwl.dll Adobe Owl 2012/06/26-12:17:19 4.0.95 66.510504
AdobePDFL.dll PDFL 2011/12/12-16:12:37 66.419471 66.419471
AdobePIP.dll Adobe Product Improvement Program 6.0.0.1654
AdobeXMP.dll Adobe XMP Core 2012/02/06-14:56:27 66.145661 66.145661
AdobeXMPFiles.dll Adobe XMP Files 2012/02/06-14:56:27 66.145661 66.145661
AdobeXMPScript.dll Adobe XMP Script 2012/02/06-14:56:27 66.145661 66.145661
adobe_caps.dll Adobe CAPS 6,0,29,0
AGM.dll AGM 2012/06/05-15:16:32 66.507768 66.507768
ahclient.dll AdobeHelp Dynamic Link Library 1,7,0,56
aif_core.dll AIF 3.0 62.490293
aif_ocl.dll AIF 3.0 62.490293
aif_ogl.dll AIF 3.0 62.490293
amtlib.dll AMTLib (64 Bit) 6.0.0.75 (BuildVersion: 6.0; BuildDate: Mon Jan 16 2012 18:00:00) 1.000000
ARE.dll ARE 2012/06/05-15:16:32 66.507768 66.507768
AXE8SharedExpat.dll AXE8SharedExpat 2011/12/16-15:10:49 66.26830 66.26830
AXEDOMCore.dll AXEDOMCore 2011/12/16-15:10:49 66.26830 66.26830
Bib.dll BIB 2012/06/05-15:16:32 66.507768 66.507768
BIBUtils.dll BIBUtils 2012/06/05-15:16:32 66.507768 66.507768
boost_date_time.dll DVA Product 6.0.0
boost_signals.dll DVA Product 6.0.0
boost_system.dll DVA Product 6.0.0
boost_threads.dll DVA Product 6.0.0
cg.dll NVIDIA Cg Runtime 3.0.00007
cgGL.dll NVIDIA Cg Runtime 3.0.00007
CIT.dll Adobe CIT 2.0.5.19287 2.0.5.19287
CoolType.dll CoolType 2012/06/05-15:16:32 66.507768 66.507768
data_flow.dll AIF 3.0 62.490293
dvaaudiodevice.dll DVA Product 6.0.0
dvacore.dll DVA Product 6.0.0
dvamarshal.dll DVA Product 6.0.0
dvamediatypes.dll DVA Product 6.0.0
dvaplayer.dll DVA Product 6.0.0
dvatransport.dll DVA Product 6.0.0
dvaunittesting.dll DVA Product 6.0.0
dynamiclink.dll DVA Product 6.0.0
ExtendScript.dll ExtendScript 2011/12/14-15:08:46 66.490082 66.490082
FileInfo.dll Adobe XMP FileInfo 2012/01/17-15:11:19 66.145433 66.145433
filter_graph.dll AIF 3.0 62.490293
hydra_filters.dll AIF 3.0 62.490293
icucnv40.dll International Components for Unicode 2011/11/15-16:30:22 Build gtlib_3.0.16615
icudt40.dll International Components for Unicode 2011/11/15-16:30:22 Build gtlib_3.0.16615
image_compiler.dll AIF 3.0 62.490293
image_flow.dll AIF 3.0 62.490293
image_runtime.dll AIF 3.0 62.490293
JP2KLib.dll JP2KLib 2011/12/12-16:12:37 66.236923 66.236923
libifcoremd.dll Intel(r) Visual Fortran Compiler 10.0 (Update A)
libmmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 10.0
LogSession.dll LogSession 2.1.2.1640
mediacoreif.dll DVA Product 6.0.0
MPS.dll MPS 2012/02/03-10:33:13 66.495174 66.495174
msvcm80.dll Microsoft® Visual Studio® 2005 8.00.50727.6910
msvcm90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcp100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcp80.dll Microsoft® Visual Studio® 2005 8.00.50727.6910
msvcp90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcr100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcr80.dll Microsoft® Visual Studio® 2005 8.00.50727.6910
msvcr90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
pdfsettings.dll Adobe PDFSettings 1.04
Photoshop.dll Adobe Photoshop CS6 CS6
Plugin.dll Adobe Photoshop CS6 CS6
PlugPlug.dll Adobe(R) CSXS PlugPlug Standard Dll (64 bit) 3.0.0.383
PSArt.dll Adobe Photoshop CS6 CS6
PSViews.dll Adobe Photoshop CS6 CS6
SCCore.dll ScCore 2011/12/14-15:08:46 66.490082 66.490082
ScriptUIFlex.dll ScriptUIFlex 2011/12/14-15:08:46 66.490082 66.490082
tbb.dll Intel(R) Threading Building Blocks for Windows 3, 0, 2010, 0406
tbbmalloc.dll Intel(R) Threading Building Blocks for Windows 3, 0, 2010, 0406
TfFontMgr.dll FontMgr 9.3.0.113
TfKernel.dll Kernel 9.3.0.113
TFKGEOM.dll Kernel Geom 9.3.0.113
TFUGEOM.dll Adobe, UGeom© 9.3.0.113
updaternotifications.dll Adobe Updater Notifications Library 6.0.0.24 (BuildVersion: 1.0; BuildDate: BUILDDATETIME) 6.0.0.24
WRServices.dll WRServices Friday January 27 2012 13:22:12 Build 0.17112 0.17112
wu3d.dll U3D Writer 9.3.0.113
(post shortened)
Optional and third party plug-ins: NONE
Plug-ins that failed to load: NONE
Flash:
Mini Bridge
Kuler
Installed TWAIN devices: NONEThank you very much for your reply. And yes I have tried all of these suggestions that you have just made. And as for the GPU crash I did not notice that in there before but I also didn't look for it because every time I looked before it wasn't there, and looking at the date that was when that I was rolling back\uninstalling\reinstalling\trying modded drivers, etc., Which is probably the reason why the gpu sniper crashed.
One interesting thing that you said was whether there is the same failure in a new design as opposed to an existing one. The answer to that is yes and no. To elaborate, when the program was working as it is supposed to eve and creating new lights and positioning them did not cause any slowdown despite the file that I was working on, but after the problem starts occurring it is like a snowball rolling down a hill. Every time I open the file (the one I was working on when the problem started to happen) to continue work on it be sluggish response of Photoshop is still there and only gets worse. If I start over on a new file the program will run much more smoothly, but will still had a slight amount of sluggishness with less intensive task whereas the more intensive task such as working with lights is still moderately sluggish but not to the extent as it was working in the previous file. As you said in your post it seems the father all along I get in my document the more pronounced and time consuming the freezes become. But nonetheless wants the problem has occurred it does not go away I can only lesson that by starting from scratch, which is not very convenient.
If you look at the process monitor log file linked in my first post and search through it pretty quickly you will see photoshop doing this
1-Operation: unknown Path:C:\
2-Operation: unknown Path:C:\Program Files
3-Operation: unknown Path:C:\Program Files\Adobe
4-Operation: unknown Path:C:\Program Files\Adobe\Adobe Photoshop Cs6 (64 bit)
5-Operation: unknown Path:C:\Program Files\Adobe\Adobe Photoshop Cs6 (64 bit)\Required
6-Operation: unknown Path:C:\Program Files\Adobe\Adobe Photoshop Cs6 (64 bit)\Required\CgShaders
7-Operation: unknown Path:C:\Program Files\Adobe\Adobe Photoshop Cs6 (64 bit)\Required\CgShaders
1-Result: INVALIDATE PARAMETER
2-Result: INVALIDATE PARAMETER
3-Result: INVALIDATE PARAMETER
4-Result: INVALIDATE PARAMETER
5-Result: INVALIDATE PARAMETER
6-Result: NO SUCH FILE
7-Result: NAME NOT FOUND
It does this repeatedly over and over again, specifically when I tried to work with lights. The weird thing is that there is no directory in required called CgShaders. I see 1 CG.dll & 1 cgGL.dll in the Photoshop (64 bit) directory. To meet that just seems very strange and probably more than a coincidence and probably does not happen on everybody else's system.
This is the process monitor log file that I saved in csv format and edited the first three blocks so that it fit correctly. Open it up in wordpad and you'll see what I mean. This is what I was talking about right above.
https://www.dropbox.com/s/43waqf9wvc8xo7m/Logfile.CSV.rtf -
Communication problem with agilent 34401a
Hi all,
I' m using Labview 8.2 and visa 4.2.
I 've connected my agilent 34401a and it is recognized, I see it in agilent connection expert and manage to communicate with it. (query *IDN?)
But I get a problem when I want to use the control_mode vi. (remote or local).
the error is displayed just after the Visa Read function (Vi below)
I don't understand why. I use the RS 232 connection and it is correctly configured in the devices manager.
Anyone can help me ?
Thanks,
RomainSorry,
I've forgotten the Vi.
Now it's OK
Thanks
Attachments:
control mode Vi.JPG 44 KB -
HT5105 How can you do picture in picture when you are working with a Multicam clip?
How can you do picture in picture when you are working with a Multicam clip?
Im doing a drumming music video and with the multi cam clip all the angles are nicely sync'd top the audio.
Problem is if i want to have 3 angles on top of the main shot, im gonna have to re-sync them all to get them to line up manually. If i could use the multi cam clip they will already be aligned
Thanks for trying to help appreciate, hoping someone has some multiclip knowledge and will be able to tell me if yay or nay. -
Itunes 10.5 freezes when trying to sync with iPhone 4
My itunes 10.5 freezes when trying to sync with iPhone 4.
When i disconnect the iphone itunes unfreezes instantly.
Where is the problem?
Ipad syncs with no problems.I am having the same issue
Itunes 10.5 freeze when I connect my Iphone 3GS
I found a solution is to remove the podcast from my iphone and then it work immediately
But this is anoying to allways remove my podcast from my iphone
I will try your solution to way a long time and see if the problem resolve by itself I keep you posted of my results -
My iphone has lost all data when trying to sync with my computor.
I have an pad with most info on, but not keen to sync with that incase that data gets lost!
I joined icloud but cannot retreive from there as its not accepting my icloud account! Help!
If I sync phone with ipad is it likely to work safely to retrieve info as both are apple devices?.ps when syncing it jumps through steps 1 - 4 real fast, i seem to remeber iphone showing the number of tracks transferring and names, but i see nothing? then it sits on 5 saying "waiting for changes to be applied"
-
IPhone 4s reboots many times when trying to sync with iTunes
iPhone 4s reboots many times when trying to sync with iTunes.
Since IOS 8, my iPhone 4s reboots many times when trying to sync with iTunes on my Mac. It will start running the backup and reboot, it will reboot many times when updating packages. It can take 12 hours to finish a sync with the mac. The phone gets hot during this. I keep deleting more and more pictures and apps, hoping that maybe it doesn't have enough space, but iTunes shows I have 4.9 Gbytes free, which I think should be enough. I am on IOS 8.0.2, I thought maybe I would try to upgrade to the latest IOS today, but I am worried that I will end up with a non working phone.
Is anyone else having these problems?
EdWell thats Od... I have never experienced that problem.. Maybe you should try to backup your phone and then wipe it by going to Settings<General<Reset
-
Quick Time screen capture freezes when i'm working with Modo 3D. Any solution?
Hi guys, When I'm working with Luxology Modo, Quick Time screen capture freezes every time on Mac OS X Mavericks. When I'm doing some operation in Modo, like slice geometry per exemple, QuickTime crashes. I must force quit quicktime and when I relauch the application, the screen capture opens but screen capture ends at the time when I cliked on the Modo slice operation. It's frustrating because I can't do nothing with screen capture. I tried other screen capture applications but the problem persists! When I was using Snow Leopard Quick Time works very well!! Do you have some resolution for this problem? Regards, César.
I'm using OS X Mavericks as well, and it seems like the same thing happens when I try to type in MonoDevelop, part of the Unity package. Unity works fine, it only seems as though I can't screen record typing in MonoDevelop. It looks like it's still recording, it just has the rainbow wheel of death after I try to finish out the Quicktime. I left it up for several days and ignored it, but it still didn't finish. I finally had to force quit it and reopen it and when I did it opened up the temporary file of the video I was recording, but it stopped whenever I started to type into the MonoDevelop interface. The first time it let me save the video to the desktop. The second time, the time which I left it open for days, it would not let me save it, on command-S or on exit. I don't know exactly what's wrong, but I believe that you know as much as I do. Please post a reply if you need any more information or have a fix.
Maybe you are looking for
-
How to import external table, which exist in export dump file.
My export dump file has one external table. While i stated importing into my developement instance , I am getting the error "ORA-00911: invalid character". The original definition of the extenal table is as given below CREATE TABLE EXT_TABLE_EV02_PRI
-
Why is the Photo App on my iPhone 4 showing 2 Photo Streams?
- I upgraded to iOS 5 from 4.3.5 - I followed the iOS 5 wizard and configured iCloud with 1 of my Apple ID's - I did not set up iCloud on my MacBook Air on that time yet - MacBook Air was upgraded as well (MAC OS X upgrade, iPhoto upgrade, etc ...) -
-
Flash not displaying in Firefox [was: Murray *ACE*]
Hi all with regards to Murrays reply to my message in HTML Discussion, i have a problem with my site i uploaded it to test it out on my server and it works fine on Internet Explorer, but when i visit the site with Mozilla Firefox its comes up where t
-
COPY DOCUMENT ATTACHED IN INQUIRY TO QUOTATION CREATED WITH REFERENCE.
Hi, I have created a quotation with reference to an inquiry. I have attached a pdf to this inquiry and I need to know if it is possible to copy this file and attach it to the new quotation. Thanks in advance. Luis Álvarez.
-
Why are jpegs opening in preview?
I have my file type association set to CS5, yet suddenly jpegs are opening from Bridge into preview. Anyone know why?