When tryingotoshop Elements 6.0 I receive the following message, "Adobe .... has

When trying to open Adobe  Photoshop Elements 6.0 (Organizer) I recieve the following message, " ......has encountered a problem and needs to close.  If you are in the middle of something ..... the information you were working on may be lost.  I can open "edit", "creat" and "share", however, there are no prints to work with unless I go through "My Pictures" and even this is not easy to use.   The last time I used Photoshop Organizer it locked up and I needed to use "Alt/Ctrl/Delete' to close the program.  Ever since that time I cannot access the Organizer portion of this software.  Please let me know how I can correct this problem.

The catalog could be damaged. Try repairing it to see if that helps.
To do so, hold down the Shift key on your keyboard as you launch the Elements  Organizer. Release the Shift key when the Catalog Manager window  appears. Then, select your catalog at the bottom of Catalog Manager, and click Repair on the right.
For more information, see:
http://go.adobe.com/kb/ts_cpsid_51525_en-us

Similar Messages

  • When I try to import, I receive the following message: "An internal error has occurred: not enough memory".  I always download my photos onto an external hard drive.

    Yesterday,I downloaded an update for Lightroom 5.  Now when I try to import, I receive the following message: "An internal error has occurred: not enough memory".  The message comes up right after I click import, before I choose a file to upload.Here is the information I can think of that might be needed to answer this question:
    - I always download my photos onto an external hard drive.It is about 10 % full.
    - It says I have Lightroom 5.6  64 bit
    - I am working from a newer laptop (Windows).  The internal drive on the laptop has 289 gb and I am using 61 gb total memory.
    - I have edited 2794 photos in Lightroom and it is all in one catalog.
    - I did not have this problem until I made the update.  I did have my first "bug" earlier this week when one of my photos had a line show up through the middle of it when I exported it. I was able to export it a second time without the line.
    If there is more info. needed, let me know.  I do photography as a hobby and know enough about Lightroom to edit out blemishes and adjust color balance, but not too much more, so forgive my ignorance if this is an obvious fix.
    Sincerely,
    Adrianne

    Not Enough Memory typically refers to RAM.  How much RAM do you have on your 64-bit OS computer?  Do you have other programs running that may be using most of the memory?

  • When I open my computer I receive the following message: The procedure entry point sqlite3_wal_checkpoint couldnot be located in the dynamic link library SQLite3.dll How can this be corrected?  I never got this message before and I have a iPhone and iPad

    When opening Windows 7 I'm receiving the following message The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll.......I have never rec'd this before............I have a iPhone and iPad...............How can this be corrected without interferring with the information on my computer?    Thanks

    With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
    Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
    Reboot and see if all is well
    In case that your OS is Windows 7 (64 bit)
    1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    2. Copy file "SQLite3.dll"
    3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
    4. Paste file "SQLite3.dll" to the location.
    5. Reboot your computer, it should not display that message, it should be clear.
    Good Luck

  • I have tried to view videos created in premiere elements 10 and I get the following message: "this file type is not supported, or the required codec is  not installed.  When it opens there is a red screen in the monitor panel with Korean writing which als

    I have tried to view videos created in premiere elements 10 and I get the following message: "this file type is not supported, or the required codec is  not installed.  When it opens there is a red screen in the monitor panel with Korean writing which also appears in the place of each clip in the video.  I tried uninstalling and reinstalling premiere elements 10, but that did not have any effect on the video.  Do you have any suggestions?  I researched codec, but do not understand them at all.

    gloucester
    In case you did not find it, the following is a copy/paste of the Announcement on Premiere Elements 19/NVIDIA GeForce
    that appears at the top of this forum.
    Premiere Elements 10 NVIDIA Video Card Driver Roll Back
    If you are a Premiere Elements 10 user whose Windows computer uses a NVIDIA GeForce video card and you are experiencing
    Premiere Elements 10 display and/or unexplained program behavior, then your first line of troubleshooting needs to be rolling
    back the video card driver version instead of assuring that it is up to date.
    Since October 2013 to the present, there have been a growing number of reports about display and unexplained workflow
    glitches specific to the Premiere Elements 10 user whose Windows computer has a NVIDIA GeForce video card. If this applies
    to you, then the “user to user” remedy is to roll back the NVIDIA GeForce video card driver as far as is necessary to get rid of
    the problems. The typical driver roll back has gone back as far as March – July 2013 in order to get a working Premiere
    Elements 10. Neither NVIDIA nor Adobe has taken any corrective action in this regard to date, and none is expected moving forward.
    Since October 2013, the following thread has tried to keep up with the Premiere Elements 10 NVIDIA reports
    http://forums.adobe.com/thread/1317675
    Older NVIDIA GeForce drivers can be found
    http://www.nvidia.com/Download/Find.aspx?lang=en-us
    A February 2014 overview of the situation as well as how to use the older NVIDIA GeForce drivers for the driver roll back can be found
    http://atr935.blogspot.com/2014/02/pe10-nvidia-video-card-roll-back.html
    ATR

  • When trying to connect to itunes i receive the following message, "iTunes could not connect to the iTunes store"  An unknown error occured (-3212)

    Help me, when trying to connect to iTunes or the iTunes Store I receive the following message. "iTunes could not connect to the iTunes Store." An unknown error occurred (-3212).

    iTunes has been denied by your firewall. Add iTunes to your firewall allowed list.

  • When I connect my nano to my computer I receive the following message: There is a problem with this drive. Scan the drive now and fix it. My computer recognizes the ipod but the play lists saved in my itunes library are not the playlists that are on my na

    When I connect my nano to my computer I receive the following message: There is a problem with this drive. Scan the drive now and fix it.
    In addition, when I connect my nano, my computer does recognize but the library and playlists in my Itunes is not the same as the library/playlists on my ipod (on this ipod). If I purchase new songs from itunes, they go to the library on the computer but I cant get them to the ipod playlist.

    bump, I have same issue. thanks, MM

  • My Macbook pro Early 2008 is randomly slow at starting up and when I am backing up to my time capsule I am receiving the following message 'Time machine could not complete the backup. '' ''The backup disk image ''/Volumes/name time capsule/ my name MacBoo

    My Macbook pro Early 2008 is randomly slow at starting up and when I am backing up to my time capsule I am receiving the following message 'Time machine could not complete the backup. '' ''The backup disk image ''/Volumes/name time capsule/ my name MacBook Pro (4).sparsebundle'' could not be accessed (error-1).
    Problem started after deleting parrell desktop and window7 ?
    Please help?

    Look at the more like this column on the right.. this is the most frequently asked question in this discussion area.
    Reboot the TC.. restart the whole network if the simple reboot did not work.. start in order. modem.. router/TC.. clients. 2min gap.
    Read C12 here. http://pondini.org/TM/Troubleshooting.html

  • I have a new iPhone 5 and receive the following message when texting some people within my contacts.  Message sent using invalid number of digits please resend using 10 digit number or valid short code Msg:2114

    I have a new iPhone 5 and receive the following message when texting some people within my contacts.  Message sent using invalid number of digits please resend using 10 digit number or valid short code Msg:2114. Online I found a discussion that stated i needed to delete contact and re-add. I have done that to no avail. Any ideas?

    I had the same issue with the iPhone 6 and tried everything!  I now understand that at some point I stored a number for a contact without including the area code and sent a text message.  So, to correct the issue, you must literally "erase" all references to the contact, not just the number.  Deleting the contact and entering a new one is not enough because the iPhone stores references to that number in multiple places.  The steps below worked and are very simple:
    1) On the contact screen, delete everything stored for that number.  You can't just edit the contact to fix the problem, so write down or record the info somewhere before you complete this step.  Choose edit and then select DELETE to eliminate the entire contact which means home, work, cell, email address, etc.
    2) Delete the entire string of messages you sent to that number.  That's every single message...
    3) Now delete the entire string of invalid 2114 messages you received after your text(s) failed.
    4) Finaly, remove the contact from FAVORITES if you saved it that way. 
    5) To validate that all this worked, simply go to the keypad or contact screen and enter the number associated with the contact to verify successful removal.  I used the keypad and dialed to confirm.  If the contact number still shows up, you need to go back and recheck your steps.  Trust me, I had to do this a few times.
    Several posts suggested that you should  reset and turn off your phone.  After following these steps, it was not necessary for me to reset or turn off my device. 
    is there a much faster way to achieve the same results?  Probably, but this was safe for an iPhone novice and may help you avoid inadvertently deleting other contacts or replacing factory settings that you need.  

  • Why do I receive the following message when I try to sync my itouch, "this ipod cannot be used because apple mobile device is not started?

    why do I receive the following message when I try to sync my itouch, "this ipod cannot be used because apple mobile device is not started?

    See Here
    AMDS for Windows
    http://support.apple.com/kb/TS1567

  • When I try and open a word document I received the following message:  "You cant open the application Microsoft Word because PoerPC applications are no longer supported".  What is up with that?

    When I try and open a word document I received the following message:  "You cant open the application Microsoft Word because PoerPC applications are no longer supported".  What is up with that?

    Here is a post that I assembled for a similar question:
    Unfortunately you got caught up in the minor miracle of Rosetta.  Originally licensed by Apple when it migrated from the PowerPC CPU platform that it had used from the mid-1990's until the Intel CPU platform in 2006, Rosetta allowed Mac users to continue to use their library of PPC software transparently in emulation.
    However, Apple's license to continue to use this technology expired with new releases of OS X commencing with Lion (and now Mountain Lion).  While educational efforts have been made over the last 6 years, the fact is that Rosetta was SO successful that many users were caught unaware UNTIL they upgraded to Lion or Mountain Lion.
    Workarounds:
    1. If your Mac will support it, restore OS X Snow Leopard;
    2.  If your Mac will support it, partition your hard drive or add an external hard drive and install Snow Leopard into it and use the "dual-boot" method to choose between your PowerPC software or Lion/Mt. Lion;
    3.  Upgrade your software to Intel compatible versions, or find alternative software that will open your data files;
    3.  Install Snow Leopard (with Rosetta) into Parallels:
                                  [click on image to enlarge]
    Full Snow Leopard installation instructions here:
    http://forums.macrumors.com/showthread.php?t=1365439
    NOTE: STEP ONE of the instructions must currently be completed on a Snow Leopard or Lion Mac and the resulting modified Snow Leopard.cdr install file can then be moved over to your Mountain Lion Mac for completion of the remaining steps.
    NOTE 2:  Computer games with complex, 3D or fast motion graphics make not work well or at all in virtualization.

  • Receiving the following message when attempting to open a project, "Captivate could not open the fol

    Receiving the following message when attempting to open a project, "Captivate could not open the following project.  Ensure that the project is not open already...That there is sufficient hard disk space..." All the critiria are met....still can not open file.  Please assist with the recovery of this project.

    Suggestions here:
    http://www.infosemantics.com.au/adobe-captivate-troubleshooting/recover-corrupt-project

  • I can no longer log into my ichat linked to my gmail.  right after opening up ichat, receive the following message:  lost connection with jabber.  the server has unexpectedly disconnected.

    i can no longer log into my ichat linked to my gmail.  right after opening up ichat, receive the following message:  lost connection with jabber.  the server has unexpectedly disconnected.  how to troubleshoot?  thanks.

    Hi,
    There can be many reasons why the Login is "up the creek".
    Any break in the network at your end whilst logged in will cause  an issue.
    A sort of discrepancy between what iChat thinks the state should be and what the server thinks.
    If they don't agree the server will refuse to accept.
    A Crash at the server end which does not log you out properly will also do it.
    Any file at any time can be come corrupted.
    Luckily with the iChat .plists they are recreated if removed with an iChat Restart.
    If it were AIM you can also get your Account Suspended  and this will not log you in.
    (It tends to happen from Chat rooms where people notify AIM about bad behaviour (as they see it) and you have to apply to get Un-suspended).
    Most of the big IM services use multiple servers.
    Sometimes these go out of Sync.
    In the case of AIM this happens when they remove Old unused Screen Names from people's Buddy List prior to making them available for re-registration.  I am not sure if this happens at Google.
    You seem to be talking about an account that has worked at Work and having new computer at home.
    As I mentioned the Priority thing you have not said that it has coincided with the new computer logging in  (this will kick the work Computer out of Google whether you are logged in  on the Web Mail page or in iChat)
    IN addition to that iChat stays partially logged in for Off Line IMs
    This is done in the background by a support app called iChatAgent
    If your Computer is ON but ichat is not started people can still send you Messages.
    Instead of saving these on the server until you login iChat will start up.
    Depending if the home Mac is effecting the Work Login it may be holding sway over your Login.
    Using your girlfriend's login may have booted her Off Line where she normally uses the name/login.
    The AIM Side can be specifically set to allow Multiple Logins and therefore NOT allow them.  If this happens you get a warning and messages to do something about it.
    You do not get these in any Jabber or Google Login as the Priority setting is supposed to take care of it.
    If the Login works at the Web Mail Login and on one computer then the .plist on the work computer is the most likely issue.
    There is a small chance that a Corrupt Buddy Pic (Home Folder/Library/Caches/com.apple.iChat/Pictures) may be the cause.
    Set this folder to icon view and also use the Finder's View Menu > Show View Options and select icon view.
    This should show all pics as their icon.
    Check that all display properly.
    At this point I would try a COMBO version update install of the last Update you did over what you have.
    This often corrects hard to trace things
    The 10.5.8 COMBO is here
    11:28 PM      Monday; June 20, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.7)
     Mac OS X (10.6.7),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • I have been using thelatest ver firefox. Noe I can not access it. I receive the following message" Windows cannot access the specified device, path or file. You may not have appropriate permission to access. I am using windows XP ,

    unable to access firefox. I receive the following message" Windows can not access the specified device, path or file. You may not have appropriate permission to access. I restored the system to an earlier date when I could access Firefox. I removed an re-installed firefox no changes.

    Do a clean (re)install and delete the Firefox program folder (C:\Program Files\Mozilla Firefox\).
    Download a fresh Firefox copy and save the file to the desktop.
    *Firefox 13.0.x: http://www.mozilla.org/en-US/firefox/all.html
    Uninstall your current Firefox version, if possible.
    *Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you will also lose your personal data like bookmarks and passwords from profiles of other Firefox versions.
    Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
    *It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    *http://kb.mozillazine.org/Uninstalling_Firefox
    Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    *http://kb.mozillazine.org/Profile_backup
    *http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

  • Hello , I ordered the iPhone 6plus 128gb a few minutes before 3am est. I received my conformation email at 530am . As of then every time I try to check order status I receive the following message .  We are experiencing system issues, please try again lat

    Hello , I ordered the iPhone 6plus 128gb a few minutes before 3am est on Friday morning. I received my conformation email at 530am . As of then every time I try to check order status I receive the following message .  We are experiencing system issues, please try again later. Is anyone else receiving this message when checking order status?

    Are you seen that message when trying to view your orders from your Verizon account? I have the same issue but if you search your preorder confirmation number and enter you last name here Order Status | Verizon Wireless then it will at least give the vague details like, "your order has been received and is been processed" It will also show the expected delivery date.

  • I receive the following message under Boot Camp Assistant: "Can't install the software because it is not currently available from the Software Update server.

    I am trying to install the software drivers for Windows 7 Home using Boot Camp 4 Assistant. I receive the following message: "Can't install software because it is not currently available from the Software Update server." Why is this happening?

    You keep it on the usb stick for after you boot into Windows. From Windows you install the Windows Support software on the stick. Do you realize that you need to buy and install Windows? The Windows Support software you downloaded is only the Windows drivers for your hardware.
    Read the Boot Camp installation instructions and help guides located here: http://www.apple.com/support/bootcamp/

Maybe you are looking for