When turning on my Officejet 6210 the control panel flashes about 2 / second and I can't do anything

When turning on my officejet 6210 the front control panel lights flash about twice a second continuously and I can't do anything else with it.

Jessie_1091 wrote:
It won't shut down, otherwise I could just restart it. that's the problem! It's only a year old. I guess I'll have to wait until it dies
If you are still under warranty and/or have AppleCare, call them.  Let them deal w/it.

Similar Messages

  • I can't install correctly Adobe Captivate 8, cause a message of no connection to internet appears (I am connected to internet). Even though, when I want to unistall through the control panel it doesn't let me, anyone knows how to uninstall it??

    I can't install correctly Adobe Captivate 8, cause a message of no connection to internet appears (I am connected to internet). Even though, when I try to unistall through the control panel it doesn't let me, an Uninstall Failed message appears,  anyone knows how to uninstall it??
    I've already tried Adobe Cleaner Tool, but it doesn't work, as the program is not listed as one of the proposed
    Does anyone know how to uninstall it??
    Thank you

    Which are you after... installing Captivate 8 or uninstalling it (whatever "it" is)?
    Sign in, activation, or connection errors | CS5.5 and later
    https://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  • Help, I let my battery go down completely, when I try to charge it the red battery flashing sign appears and then flicks off after a few seconds. I have tried a number of chargers and a docking station nothing works. Why won't it charge?

    Help, I let my battery go down completely, when I try to charge it the red battery flashing sign appears and then flicks off after a few seconds. I have tried a number of chargers and a docking station nothing works. Why won't it charge?

    hi I have the same problem... tried many different docking ports and cords also switched from outlet to outlet..... left on on outlet for 7 hours and still nothing.. what should i do?

  • HT3669 My Epson Perfection 1200 scanner functions as a flatbed scanner but when I try to scan transparencies the control panels change in  Image Capture but the scanner bar will not complete the overview scan  & cannot travel beyond the first 2/3 centimet

    Epson Perfection 1200 scanner continues to function as a flatbed scanner but when I try to scan transparencies/film negs the control panels change in  Image Capture but the scanner bar will not complete the overview scan  & cannot travel beyond the first 2/3 centimeters. All the communications seem to recognise the scanner and the mode for the intended scan but the necessary overview scan is not completed, nothing comes up on the Image Capture scan window. If I unplug the film adaptor I can get a document scan. When I plug in the adaptor again the Image Capture details change which allows me to select the type of scan required but when the scanner attempts an overview scan it is unable to complete it.
    I have had the scanner from new (12 Years) and have previously scanned slides and film with the adaptor but maybe this was before I upgraded my computer (imac 27").
    Do I have to buy a new scanner?  It seems so close to working correctly. 
    I have downloaded the Epson recommended driver (5.4) and have Epson Perfection 1200 6.6 Universal showing in the Applications List.
    Any thoughts or observations would be much appreciated before I go out and spend money an new hardware.
    Thanks

    I have same issue - have you solved this yet?

  • HT1296 i am trying to load my iphone3 via my computer, but it gives a message that device not connected, when it is clearly showing on the control panel

    i am trying to load my iphone3 via my computer, but it gives a message that device not connected, when it is clearly showing on the control panel

    Hi glomp,
    From the information provided, it sounds like your device may not be fully recognized by iTunes. Here are two articles (depending on your computer's operating system) for troubleshooting this:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/ts1591
    Have a good one,
    - Ari

  • How do I uninstall older versions of Adobe Reader, when they cannot be removed from the Control Panel?

    How do I uninstall older versions of Adobe Reader 9.4.4 from the Remove
    Programs in the Control Panel?

    You can use the Acrobat Cleaner Tool from http://labs.adobe.com/downloads/acrobatcleaner.html
    This will remove all versions of Adobe Reader and Acrobat.

  • HT1199 Hi. I've got an issue with Pages running on Mavericks on Macbook air. Every time I open the app it hangs right there and I can't do anything on it. I've uninstall and install it back again but the issue still persists. Any help please?

    HI. I've got an issue with Pages running on Mavericks. Everytime I open it up it just hangs right there and I can't do anything with it. I've deleted the app and installed it back again but the problem sitll persists. Any help please?

    Thank you so much for helping,
    But i really wonder how you did that. did you always switch between design view and preview view, then change the key position for 2px then switch back, to align the four letters? because i imagine that can get really frustrating, if you have a logo consisting of 58 parts instead of 4!:)
    Anyway thank you very much for your time and effort!!!!

  • When my phone turns on it goes to the normal screen for 1 second and then it gets very large so you can only see a few icons

    When I turn my iphone on, the usual main icon screen shows for about a second and then it blows up so you can only see a few icons at a time.  How do you turn this off?

    Your phone might be on Zoom somehow, try just the simple "gestures" fix
    Double tap with 3 fingers on the screen, then drag down. That should at least zoom out. If that does not work, try scrolling through the screen, but using 3 fingers instead of 1.
    From there you should be able to access Settings>General>Accessibility>Zoom>OFF
    Hope this helps

  • When I try to play one of the games my ipod classic freezes and I can not do anything what do I do

    Can anyone help as to either why my iPod freezes when I try to play the games or how to sort it out when it freezes

    You could try to reset your iPod.  Here is how:
    1. Toggle the Hold switch on and off. (Slide it to Hold, then turn it off again.)
    2. Press and hold the Menu and Center (Select) buttons simultaneously until the Apple logo appears, about 6 to 8 seconds. You may need to repeat this step.
    Tip: If you are having difficulty resetting your iPod, set it on a flat surface. Make sure the finger pressing the Select button is not touching any part of the click wheel. Also make sure that you are pressing the Menu button toward the outside of the click wheel, and not near the center.
    If the above steps did not work, try connecting iPod to a power adapter and plug the power adapter into an electrical outlet, or connect iPod to your computer. Make sure the computer is turned on and isn't set to go to sleep.   Try resetting the iPod while it is connected to power.
    Source: http://support.apple.com/kb/HT1320

  • Ie 8 is the browser used through the control panel to connect to ms update can firefox be used instead?

    i like using firefox and ie takes over instantly when i use control panel to check for updates.is your browser uncapable of this task.

    MS uses ActiveX controls on the update site, so you can only access that site via IE and not with Firefox or other browsers.

  • When plugged into wall, iPhone 4 says to restore at iTunes.  When plugged into PC the apple icon flashes 10 seconds and screen goes blank 10 seconds. The device never shows in iTunes.  How do I restore?

    I need to restore my iPhone 4 in iTunes.  I get this message when it is plugged into the wall.  When I plug it into the PC it doesn't stay on long enough for recognition.  How do I restore?

    Sorry, disregard the last response; I can't edit it. You should dry it BEFORE trying different cables. The safest way to go about this is dry your iPhone inside-out and to not turn it on until it's dry. Maybe there is a little moisture stuck inside preventing it from booting, but if you're lucky, it's not permanently damaged. The best way I've heard of to dry it is to leave it overnight in a tight bag with dry rice or, better yet, silica packets (those anti-moisture things found in packaged items). Maybe longer if you want to be extra safe. If it still doesn't charge without the Apple logo flashing, try using different Lightning to USB cables. Maybe it's just a bad cable, but you shouldn't test that until you've dried your phone.

  • My ipad displays the old user name. the control panel shows my name but I can not login.

    Why can I not log in this support area using my itune username?
    I am the second user of my iPad. The settings area for the App Store has my correct information. But the App Store application shows the previous user. How can I fix this?
    Thanks,

    Great, glad you got it sorted out. Let us know if you have follow up questions.
    =Ryan
    [email protected]

  • I have not got a verification email for my password for the apple id that i created over two weeks ago.  i have tried resetting my password and resending the email but nothing comes though and i can not buy anything on itunes.

    i have an apple account, but i created a new one because none of the passwords i use worked on it (i hadnt been on in a while)
    so i set up another account with the same email and a new password on January 27.  i have chevcked my emails every day since then and my junk email folder and there is nothing there to help me!
    i cant log on to or use my itunes at all because it tells me that i havent verified my password and every time i click resend verification email and nothing comes to my email.
    i dont know what to do now,  i have just tried to reset my password online and it said that it worked, but when i go on itunes there is still nothing working...
    any help would be appreciated!

    The very similar situation with mine:
    https://discussions.apple.com/thread/3492726
    I can't find any solution. I don't even remember when I changed my apple ID! So does that means I cant recovered my purchased apps from my " old" account? I am totally innocent, for I did not intend to "Change" my account name

  • My apple password and id works on everything except when i go through the control panel, i get server error

    I get server error when I try and open I cloud on the control panel. My id and password work on everything else. Anyone know how to fix this. Vista 8.

    What is your current connection via speedtest.net
    Make sure DNS is set to auto (settings - general - network)
    If on wifi try ethernet

  • How do I retain the control panel when working crossdomains?

    I’m using the crossdomain.xml file to allow access to
    the swf, flv and SteelExternalAll.swf files from another server.
    This works fine except that the control panel doesn’t appear,
    and there is a blank white space where it should be. How can I fix
    this?

    Since you are doing "screengrabs" why not do the "crosshair" shots?  This way you get exactly what you want.
    Apple+Shift+4 keys

Maybe you are looking for

  • Can I create MacOS on flash drive to run broken Imac?

    So I've got an Imac that's all brokedy. Won't start up. I tried reinstalling Snow Leopard 10.6.7 on it from a boot disk, but got referred to Disk Utility. Disk Utility told me that the GB 500 drive was so fricked up that Disk Utility can't do a thing

  • Problem in creating a row in backing bean for a view object..

    hi, i've created a view object and am trying to create multiple rows in my backing bean. but am not able to do that one. my 1st row is getting inserted and all the other values am not able to do. can anyone reply to this as soon as possible. Thanks i

  • Get SYSID in XSLT mapping

    Hello, Does anybody know a way to get the sysid (or the current environment) at runtime using XSLT mapping. Some simple java code is also Okay Cheers Emile Message was edited by: Emile Hermans

  • Aperture 1.5.3 and iWeb - poor image quality and shuffled Media browser

    Hi, I have two questions: 1. I used to use iPhoto 6 together with iWeb 1.1.2, but have since upgraded to Aperture. My Aperture library previews show up nicely in iWeb's media browser, but the quality of the thumbs on the photopage I create, and fulls

  • Mail is squishing / squashing / distorting certain jpg attachments

    Somehow my last post got marked as 'solved' by me, by accident. Searched around and have seen this question in some form, but no answer. I have more/new details from my own trouble shooting Mail is sometimes squashing or distorting certain .JPG attac