When typing the product in the Item Grid - it goes-off

Hi Experts,
we are facing a strange problem.
We have created a new item grid assignment block Z* (similar to BT115QIT_SLSQ)  in the CRM Quotation (BT115H_SLSQ) apart from the existing one.
Now when we try to create/insert an item using the F4/Search Help it works fine.
But When we try to create/insert an item by by typing it or copy-pasting it and enter, it goes-off & ordered_prod becomes blank.
Does any one has has idea on that or faced similar problem?
Thanks in Advance!
Regards,
Tarak

Hi Masood,
in the SET_ORDERED_PROD - the product value is there in <nval>, so it is set
but in GET_ORDERED_PROD - it is not able to get that value.
In the create context node of the CTXT class - I am not creating any new context node. Actually I have copied the component BT115QIT_SLSQ into a Z* component. So the Z* component is exactly similar to BT115QIT_SLSQ, then added this component to the header component BT115H_SLSQ in the overview page as an assignment block. So now we have 2 assignment blocks for the item grid, now I am controlling the products into these item grids using the Item category/category id. It works perfectly fine when i use the search help for the products.
But when I type it - this problem is coming.
Here I am using the context node BTADMINI (which is standard & present in BT115QIT_SLSQ & so in Z* as well).
Regards,
Tarak

Similar Messages

  • This morning I ask about the requirement to download the adobe Cs6 before i buy the product and the salesperson told me that i met the requirement for that particular software, so my surprise now when i open the file it says an error because my computer d

    this morning I ask to a sales person about the requirement to download the adobe Creative Cs6 before i buy the product and the salesperson told me that my computer met the requirement for that particular software, so my surprise now when i open the file it says an error because my computer doesn't meet this requirement,  my computer is a OS X 10.5.8 and the requirement  is OS X v10.6.8 or v10.7 what can i do?

    The requirements are online. For the Master Collection the requirements on Macs are:
    Mac OS
    Multicore Intel processor with 64-bit support
    Mac OS X v10.6.8 or v10.7
    4GB of RAM (8GB recommended)
    15.5GB of available hard-disk space for installation; additional free space required during installation (cannot install on a volume that uses a case-sensitive file system or on removable flash-based storage devices)
    Additional disk space required for disk cache, preview files, and other working files; 10GB recommended
    1280×900 display with 16-bit color and 512MB of VRAM; 1680×1050 display required and second professionally calibrated viewing display recommended for Speedgrade
    OpenGL 2.0-capable system
    DVD-ROM drive compatible with dual-layer DVDs (SuperDrive for burning DVDs; Blu-ray burner for creating Blu-ray Disc media)
    Java™ Runtime Environment 1.6
    Eclipse™ 3.7 Cocoa version (for plug-in installation of Flash Builder); the following distributions are supported: Eclipse IDE for Java EE and Java Developers, Eclipse Classic, Eclipse for PHP Developers
    QuickTime 7.6.6 software required for QuickTime features, multimedia, and HTML5 media playbackOptional: Adobe-certified GPU card for GPU-accelerated performance in Premiere Pro; see the latest list of supported cards
    Optional: Adobe-certified GPU card for GPU-accelerated ray-traced 3D renderer in After Effects; see the latest list of supported cards
    Optional: Tangent CP200 family or Tangent Wave control surface for Speedgrade
    Optional: 7200 RPM or faster hard drive (multiple fast disk drives, preferably RAID 0 configured, recommended) for video products
    Broadband Internet connection and registration are required for software activation, validation of subscriptions, and access to online services.* Phone activation is not available.
    You should have been given the correct information. Adobe offers 30-day money back guarantee.
    You can find return information here:
    Return, cancel, or exchange an Adobe order

  • I have a macbook and when typing in my password the keyboards just beeps

    I have a macbook and when typing in my password the keyboard just beeps

    Could you specify the model of MacBook and the OS X it's running, please? Some of the advice or references vary along with the system, so this could be helpful to formulate a reply. I've never used a Guest User selection, but do have more than one User.
    If the computer does not have an optical drive, you may be able to boot it into a recovery disk mode or something; in an attempt to see what is wrong and maybe fix it.
    Good luck & happy computing!

  • Hi, I would like to deactivate CS6 from my old laptop and reactivate it on my new one. In order to re-activate it, what is the process? Do I need to download the product like the first time? Is there something to be careful of? Thank you!

    Hi, I would like to deactivate CS6 from my old laptop and reactivate it on my new one. In order to re-activate it, what is the process? Do I need to download the product like the first time? Is there something to be careful of? Thank you!

    Hi petrosk47967892,
    In order to reactivate this product on a new machine, you can simply download & Install the product on the new machine using the following link and enter the serial number when prompted. Make sure to deactivate the product from your old machine by launching any one of the products, go to Help>Deactivate/signout.
    Download CS6 : Download CS6 products
    Cheers,
    Kartikay Sharma

  • ERROR: You're trying to run the product with the legacy launcher oracle.ide.boot.Launcher

    Hi,
    I have problem while upgrading SQL developer 4.0.0.12 to 4.0.0.13 on my windows 64 bit machine. 4.0.0.12 version is working good, where as 4.0.0.13 is showing below error while starting it.
    I did try sqldveloper.exe and its not working, So I started running sqldeveloper.bat to get more information, also added AddJavaLibFile & SetMainClass to sqldevloper.conf but no luck. Could you please help in this regard.
    Error Message
    C:\Dev Software\sqldeveloper-2\sqldeveloper\bin>java -Xmx640M -Xms128M -Xverify:none -Doracle.ide.util.AddinPolicyUtils.OVERRIDE_FLAG=true -Dsun.java2d.ddoffscreen=false -Dwindows.
    shell.font.languages= -XX:MaxPermSize=128M -Dide.AssertTracingDisabled=true -Doracle.ide.util.AddinPolicyUtils.OVERRIDE_FLAG=true -Djava.util.logging.config.file=logging.conf -Dsql
    dev.debug=false -Dide.conf=”./sqldeveloper.conf” -Dide.startingcwd=”.” -classpath ../../ide/lib/ide-boot.jar oracle.ide.boot.Launcher
    ERROR: You’re trying to run the product with the legacy launcher oracle.ide.boot.Launcher . Check your .conf file and be sure to include:
    AddJavaLibFile ../../ide/lib/fcpboot.jar
    SetMainClass oracle.ide.osgi.boot.OracleIdeLauncher

    Use C:\Dev Software\sqldeveloper\sqldeveloper.exe instead.

  • Can I Use The Products On The Tables At The Apple Store

    I Want An Apple Product But i dont know if i should get an ipod and iphone idk but i would like to know if i can use the products on the tables so i can choose the apple product i want and i need to know before this afternoon

    If they're sitting on the tables and not in boxes, they're display models and intended for people to play around with without buying them.
    (78249)

  • After reinstalling Acrobat 8 professional on new Windows 7, I occasionally get a notice that I need to Register the product but the Registration always fails; how do I resolve?

    After reinstalling Acrobat 8 professional on new Windows 7, I occasionally get a notice that I need to Register the product but the Registration always fails; how do I resolve?

    Please refer to : http://helpx.adobe.com/acrobat/kb/prompted-register-repeatedly-acrobat-8.html
    Regards,
    Anoop

  • Iphone 4 will not start up...the apple icon comes on and then goes off and then comes on and goes off again continuously....any ideas?

    Iphone 4 will not start up....the apple icon comes on and then goes off and then comes on and then goes off continuously....any ideas?

    1. Try doing a hard reset:
    Press and hold both the Home button and the Sleep/wake button simultaneously for about 15 seconds and release when the Apple logo appears.
    2. If that doesn't solve it, use: http://support.apple.com/kb/HT1808
    Using this article will erase everything on the device, so make sure you have a backup!
    If you get specific error messages/codes in iTunes when updating/restoring, check this: http://support.apple.com/kb/ts3694 for causes and solutions
    Good luck
    JW
    Message was edited by: jesterwylde

  • Sales order going to dump when we enter product in the transcation

    Hello Gurus,
    I am facing a problem in the sales order, when i enter a product in the transcation(TA) it going to dump........It is showing the message like this.........,
    What happened?......
        Error in the ABAP Application Program
        The current ABAP program "SAPLCRM_MKTTG_PF_SEL_INFOSET" had to b
         because it has come across a statement that unfortunately cannot be      
         executed.
    Error analysis......
        An error occurred when executing a Remote Function Call.
        "CPIC-CALL: 'ThSAPOCMINIT'#Unable to determine host address: 
          NiHostToAddr failed "
        Status of connection.... "CODE=CM_PRODUCT_SPECIFIC_ERROR -1 -1  
        SAPCODE=497
         CONV= " Internal error code.... "RFC_IO5"
        There is an error in the communication system. To clarify
        and resolve the error, contact your system administrator.
        Last error logged in SAP kernel
        Component............ "NI (network interface)"
        Place................ "SAP-Gateway on host IGINXMIEP / sapgw00"
        Version.............. 38
        Error code........... "-2"
        Error text........... "hostname 'iwdf7yte.wdf.sap.corp' unknown"
        Description.......... "NiHsLGetNodeAddr: hostname cached as unknown"
        System call.......... " "
        Module............... "nixxhsl.cpp"
        Line................. 223
        The error reported by the operating system is:
        Error number..... " "
        Error text....... " "
        Please provide me the solution...........its very urgent
    Thanks and Regards
    Chandramohan
    I dont Mind to reward full points............

    Hi julius,
    Thanks for the reply,
    The settings in the SAP Note, which you have given....they are in already in place.
    Regards
    Chandramohan

  • Tags are not found when typing a keyword into the location bar

    Previously when I typed a tag into the address bar - tagged bookmarks would show up. Now very rarely does this happen and instead search engine search terms show up.
    To search for tags/keywords I now have to open the bookmarks and do a search in there. Very inconvenient... it suks big time. WTF happened?
    Thanks Joe

    I think I am on the way to an answer. I turned off ALL add-ons and tags are now showing up in adress bar searches.
    Thanks! :-)

  • When typing text in forms, the vertical bar gets multiplied all over the place.

    Often when I'm typing text into a form on various sites, be it Facebook or this very site, the vertical bar that follows the input text gets randomized all over the line and appears multiple times. The glitch disappears about half a second after I stop typing (as soon as the pipe character starts blinking), but it still drives me nuts when I'm typing something regularly. You can find a screenshot of this in action from a Facebook form here: http://imgur.com/mNr9Y

    Try to disable "Morphological Filtering" in the Catalyst drivers:
    * Catalyst Control Center > 3D Settings > Disable Morphological Filtering

  • When typing on my iPad the screen does not move up so I can see what I am typing.

    Under normal operation, when using the virtual keypad, iOS shifts the screen so that it's possible to view what you are typing all the time. On my iPad if the text I am typing is below the keyboard, the screen is not automatically moved up. On some forms for example, where it is not possible to manually shift the screen, it is impossible to see what you are typing. I went to the Genius Bar and they wiped my iPad and reinstalled iOS 6 but I still have the problem. I'm guessing it is being caused by one of my apps but with 174 apps which all reinstall from the cloud it is impossible for me to know which one (and Apple is supposed to have tested all apps anyway). Any suggestions?

    So reading related comments and your feedback here helped me identify and fix the issue. Basically by turning off the split keyboard option in settings the problem with not scrolling was corrected. I then tried turning the option back on and it now appears to work fine either docked or split. I'm guessing there is a bugs in iOS whereby the setting for the split keyboard causes it to not scroll the window under specific circumstances (if I had to guess I would say when you switch the split keyboard option on and then don't use the spilt keyboard). And for the record, this problem occurred for all Apple apps as well as 3rd party apps (eg Apple notes). my advice to the "Genius" guys is to do basic stuff like changing the settings first before they resort to wiping and restore.

  • Socialmedia modules changing/dissapearing when adding a product to the cart

    Hi,
    I have this problem:
    I have the facebook and Twittermodule integrated in the large product layout. When i add a product to the cart the modules change/dissapear. I have deleted almost all scripts from the templates just to check. But with no scripts the problem is there to.
    For example:
    http://grootaartseuronics.businesscatalyst.com/Beeld/smart-tv/samsung-smart-tvs/samsung-le 40c750
    After adding a product:
    I hope someone can help.
    Thanks,
    Frank

    Hi Frank,
    Don't bother with Florians article, it doesnt work.
    There is no simple way of getting facebook like and add to cart to work properly in the online shop layouts.
    Not only is the add to cart causing a major headache, i have found that if you click the "Facebook Like" before you add to cart, then the add to cart button doesn't work unless the page is refreshed.
    So we have a MAJOR problem with what should be an out of the box solution from Adobe for online shopping. The promise of "turn key eCommerce" is no good unless your a hardcore programmer. All our clients are going to want (and expect) these features to work, but instead we have to do hack upon hack. I havent even dared to test it in Internet Explorer yet....
    Please BC, we really need the social modules to work in the online shop without any conflicts.

  • When typing an address in the location bar and pressing enter, nothing happens and the site does not load. How can I fix this?

    When I type a new URL in the address bar (or location bar), and I either type the complete URL or select from the drop down list, nothing happens. I hit enter, and the website does not load in the current tab, new tab nor in a new window. Exactly the same when I hit the green arrow to the right of the address bar. I am using Firefox 8, and all my add-ins are up to date.
    It has been working before. The setting to get Firefox to open new pages in a new tab from the address bar is there, so it should open a new tab. But I get nothing at all!
    Please help, how can I fix this?
    Thanks,
    James.

    That issue can be caused by an extension that isn't working properly.
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode

  • The wifi on my  iPod keeps keeps going off. I am going to settings but it is not allowing me to click onto my own home hub? Really frustrating

    The wifi on my iPod keeps going off. I go to settings, turn wifi back on and click on my home hub in choose a network zilch!!! message pops up 'Unable to join the network'!! Can anybody please suggest a solution. I am not really a tech type but if given clear instruction I may be able to solve this menace. Thanks

    Try:                  
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

Maybe you are looking for