When u carry out scheduling (at operation mode)?

hi all,
Can any one explain while scheduling is carried out it can be scheduley immtly or at particular time day.
Can anyone explain scheduling at operation mode what does this mean. illustrate with an example.
thanxs
hari

Hi Sujit,
Thanks for your reply!
I tried CWBQM. Unfortunately could not succeed. I think may not be feasible through CWBQM.
But I came across T-Code CEWB . There I opted "SAP_OPERATION" as working area and it worked. Its quite useful T-Code.
Thanks again for your input.
Regards,
Anand Rao

Similar Messages

F110 - Automatic email to vendor when payment run is carried out

Hi,
I am trying to configure automatic emails to be sent to vendor when automatic payment run is carried out.
Please note that i have already carried out the following settings:
Step 1- Define Std communication method as SMTP (Internet mail) in vendor master
Step 2 Maintain email address via FK02.
Step 3 - T-Code BERP Code to find Find event 00002040 This is a Function called SAMPLE_PROCESS_00002040, copy with another name i.e. ZSAMPLE_PROCESS_00002040
Step 4 T-Code FIBF -> Option -> Product ->a Customer, Write product name at your choice (for example ZMAIL) and make it active.
Step 5 T-Code FIBIF -> Option ->Process Function (or Module) ->. A Customer.
Process = 00002040
Module Function = ZSAMPLE_PROCESS_00002040
Product = ZMAIL (name of product define by you in step 4)
it will automatically send mail to vendor provided SCOT is configured.
However, when i carry out the payment run, email is not generated..
Can someone please help me out with the above?
Thanks in advance

Andi,
this might help....
Emailing SAP Remittance advice:
1.
For the following process to work SAP Connect needs to be configured for outgoing mail. This is carried out by the Basis team. The t-code is SCOT.
2.
<b>Vendor Master Data</b>
Define Std communication method as SMTP (Internet mail) and maintain an email address in the vendor master data.
3.
<b>T-Code BERP</b> Code to find the relevant BTE. Use the Selection Attribute to browse for your business area. In my case, it is AP-Payment Transactions hence FI-AP-AP-PT.
00002040 is the relevant process. This is a Function called SAMPLE_PROCESS_00002040. In this case, the FM only checks for an email address in the Vendor Master. If more logic is required a Z-version would need to be created.
4.
Use t-code FIBF to create the enhancement.
a)
Create a product.
A product groups together customer enhancements to BTEs developed in the customer's namespace. All customer enhancements assigned to a certain customer product can be released with the Activate Customer Product indicator. The OPEN_FI function module for a certain customer enhancement cannot find the corresponding customer function modules, until this has been done.
Create the product name (for example ZMAIL) and make it active.
FIBF->Settings->Products->of a Customer
b)
Assign the BTE to the FM:
Settings->Process Modules->of a customer
Assign the 00002040 process to the FM and Product.
5.
At the end of this process when the payment advice program is run, the event will be called and it will automatically send an email to the vendor.
6.
Assign an email address to the sap user who will be the outgoing accounting clerk. Define the Accounting Clerk for the outgoing email address:
SPRO->FI->AR/AP->Vendor Accounts->Master Data->Preparations for Creating Vendor Master Data->Define Accounting Clerks
hope it helps.

Automatically reconnect to Mobile Network when coming out of Low Power mode

My Pearl 8130 automatically disables the Mobile Network when it goes into Low Power mode. Unfortunately, it does not automatically re-enable the network when it comes out of Low Power mode. It also doesn't allow me to re-enable the network immediately after I've plugged it in, only after I've plugged it in and the battery has recharged for some period of time.
This means that I frequently absent-mindedly leave my phone disconnected from the network for hours at a time, even after the battery has recharged and the phone is capable of reconnecting. This is really inconvenient and, in my opinion, a huge design flaw.
Is there some way to configure my phone so that it will automatically re-enable the network as soon as (or soon after) battery power has reached the necessary level?

Actually, newer models do behave differently and have a different threshhold for cutting off the radio.
But remember this, the 8100 is getting to be an old device... and batteries have been upgraded since it was first released, as well as technology and specs on the newer devices.
The goal of the BlackBerry in cutting off the radio is to allow reamining use of your device, and to not allow the entire battery 100% to be sucked dry. Leaving the device signal and data running at less than 15% will very quickly deplete.
So, with that said, I would still recommend topping off the battery from time to time, in your case at night, or first thing in the morning.
And look at this application, ForceRadioOn
http://www.blackberrynews.com/2009/06/09/free-forceradioon-app-for-when-your-battery-gets-low/
But remember, using that app will drain your battery pretty quickly, but allow you to make that one last emergency call.
I guess you just can't have it both ways, long-life battery AND leaving the radio on below 15%
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Error "Multi-level error propagation carried out" when I run a report

Hi All,
When I run the report /SAPAPO/CDPS_REPT - Order and Resource Reporting with the below criteria I getting error "Multi-level error propagation carried out"
Planning Version - Simulation Version XXX
Evaluation Start - 05/03/2011
Evaluation End - 12/31/2013
Evaluation List - Extended Operation List
I do not get error when I run the report with selection as Active version 000 and Evaluation List as Order List, Operation List.
I have tried by ruuning Live cache consistancy check, but the issue is not fixed
Please help me to resolve this issue
Thanks & Regards,
Rajkumar

Hi Jack,
Please do post the server log file here so that we can try and find a solution for the problem you are facing.
I had a problem a while ago with the app server too. While trying to run an application, after a few times, it would give me an error message saying the Application Server cannot be started. I rebooted my machine and thankfully it worked again. Just try this too and see if it works.
If it doesnt we can go through the server log and try to identify the cause of the problem.
Cheers :-)

Scheduling can not be carried out

Hi Gurus,
i am facing some problem in scheduling of production orders,during creation of production order system gives an error message "No reqmts/caps exists or not relevant
scheduling". I have already defined the capacities in capacity header tab page and marked relevent to finite scheduling indicator.
msg no -CY 298
chandan sood

Hi Jiual,
i have maintained the following settings for scheduling;
1.OPJK : Capacity Availability Check ,Over all profile.
2.In OPU3 : On Detailed Scheduling tab i have maintained SellD,Generate Capacity tab check box ticked,Scheduling Ticked.
3.OPCG: Define operation Control key , i have ticked the Scheduling check box ticked.
4.CA02 capacity header the active version 1
5.relevent to finite scheduling check box ticked on capacity header tab page of work centre.
6.shift timings on capacity header tab page of workcentre.
7In opu5 combination of plant, order type and production scheduler is maintained.
still scheduling is not carried out.system proposes the same time and date as provided in basic finish date for backward scheduling.
regards
chandan sood

Operation ' Change Attribute TSTATE ' could not be carried out for Request

hi,
i am unable to delete the request Id from DSO. and when i checked that, it says request is partially activated(error occured during the activation)
and when i checked the logs i got the following error messages:
Operation ' Change Attribute TSTATE ' could not be carried out for Request 609249
Termination in problem report 'RSS2_DTP_RNR_SUBSEQ_PROC_SET' in row ' 361'
i even thought it was BASIS issue but it was not.
due to this error the process chain is failing daily
kindly help
regards
laksh

hi arvind,
i tried using the both the methods you had mentioned, i am able to delete the request at that moment but its again coming back, i think as it is a partially activated request so may be that is why it is happening
but the problem is still there
regards
Laksh

Operation ' Change Attribute TSTATE ' could not be carried out

Hi All,
When I attempt to compress an infocube I get the following error messages:
@5C\QError@ Operation ' Change Attribute TSTATE ' could not be carried out for Request 1114486
@5C\QError@ Termination in problem report 'RSS2_DTP_RNR_SUBSEQ_PROC_SET' in row '255'
I checked the request 1114486 in infocube and saw that its status is green however the overall status in the load monitor was "deleted".
How can I fix the problem with this request ?
It is a very old request and it was already uploaded to several other targets.
Thanks in advance..
Berna

hi,
It can be due to large data volume which might require more system resources then usual, see if there is any dump related to this in ST22, Also check whether any request is currently running on cubefor data loaded to cubeor getting load to further targets
try compression for less requests say 3 or 4, see if it works or not
hope it helps
regards
laksh

Operation ' Modify attribute TSTATE ' could not be carried out for Petition

Hi Experts, when try compress a infocube appear this error
Operation ' Modify attribute TSTATE ' could not be carried out for Petition xxxx
The petition status is green.
Any idea?
Enrique.

hi arvind,
i tried using the both the methods you had mentioned, i am able to delete the request at that moment but its again coming back, i think as it is a partially activated request so may be that is why it is happening
but the problem is still there
regards
Laksh

Operating system os x 10.6.8 safari 5.1.10. am told on checking that 16.0.305 is installed but not listed in applications. have downloaded install app but cannot carry out the installation. am informed flash player is blocked.

operating system os x 10.6.8 safari 5.1.10. am told on checking that 16.0.305 is installed but not in application. have downloaded install app but cannot carry out the installation. can anyone help? am unable to use any application requiring flash player.
thank you!

Hi Anne,
Your version of Safari is still supported. Please see Adobe Flash Player | Tech specs for supported OS and browsers.
If the Flash Player plugin is in the Plug-ins (disabled) folder it's because it's an older version that Apple has disabled in Safari. This has nothing to do with whether or not Flash Player supports the browser.
I'm not sure what you mean by "when i click on flash player itself i am told there is no application to open it." Flash Player.plugin only works in the browser to view Flash content in the browser. The plugin does not open files outside of the browser. If you have SWF files you'd like to view outside of the browser, then you'll need the Flash Player projector. However, based on your previous comments this doesn't appear to be what you are trying to do.
Google Chrome does embed Flash Player in it, while Firefox does not. Mozilla has also recently started blocking older versions of Flash Player in Firefox similar to what Apple is doing in Safari.
Following the 'clean install' instructions should result in you having the latest version of Flash Player installed that will not be blocked by the browser.
Maria

Whether MRP can be carried out for work scheduling GR. 20 i.e. work to orde

Dear Experts,
Whether MRP can be carried out for work scheduling GR. 20 i.e. work to order.
mahendra

Hi MShirodkar,
Yes, s and it specifies the time needed to process the material in the operations at the different work centers.
The GR processing time depends on the order quantity.
The GR processing time is required to calculate the lot size dependent in-house production time. The system then uses the in-house production time to determine the planned dates for planned orders in materials planning.
You can define work scheduling times in the material master record in one of two ways.
Either you enter the in-house production time. If required, you can get the system to update this value from the routing.
Or you enter the setup, teardown, processing, and interoperation times. If you maintain these values, the system determines the in-house production time on the basis of lot size.
I hope it clears you doubt any queries please revert me back.
Regards,
Madhu.G

*The operation cannot be carried out with this node type*

Hi Friends,
My requirement is :
PO in IS retail system--(IDOC ORDERS)--Sales Order processing-->Sales order in AFS system
where AFS is apparel footwear solution used in retail industries.
Now I have created PO in IS-retail system , and IDOC is successfully generated .
After this I am checking this IDOC in AFS system thru tcode BD87 for processing but getting error mesage in next screen when I am executing BD87 after putting the IDOC number.
The operation cannot be carried out with this node type
Message no. B1891
Diagnosis
Node types such as logical system, inbound and outbound IDocs or filter nodes are used only for the structure and for information. They cannot
be used for processing and display functions.
Any pointers .
Regards
Ashu

a

[nQSError: 22023] An arithmetic operation is being carried out on a non-num

Hi All,
I have created a logical column for rolling period based on a measure. I have used newly created rolling period column to create another column. I have checked the global consistency there were no errors in rpd. I have uploaded the rpd, when I was trying to expand that table in Answers it is giving an error *"State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 22023] An arithmetic operation is being carried out on a non-numeric type. (HY000)"*
The base measure has aggregation rule. Please help to find resolve this issue.
Thanks in advance.

Rolling Amount- "PeriodRolling("Core"."Fact - Sales - Orders"."Order Amount" , -10, 0)"
Amount- "case when VALUEOF("No_of_Days"."No_of_days") <= 10 then ( "Core"."Fact - Sales - Orders"."Rolling Amount" / 10) * VALUEOF("No_of_Days"."No_of_days") else "Core"."Fact - Sales - Orders"."Order Amount" / VALUEOF("No_of_Days"."No_of_days") end"
I have created above two measures.
Expand table means we need click on + symbol besides the table name to select columns, it is not allowing me to click on that + sysmbol.

My iphone 4S only start whit cable plug in and then show battery very low (with red line end) then try to turn on but show searching in operator name command and not connecting and no work properly and when I plug out it turn off!!! what should I do?

My iphone 4S only start whit cable plug in and then show battery very low (with red line end) then try to turn on but show searching in operator name command and not connecting and no work properly and when I plug out it turn off!!! what should I do?

I'm afraid you'll have to get the phone serviced, dropping the phone must have damaged additional parts inside the phone.
But Apple will not service the phone anymore, opening the phone and replacing the battery should only be done by authorized personal, not by users.
You'll have to look for a 3rd party repair shop and see if they can fix this, sorry.

HT201263 When my ipod touch is in recovery mode, when i try to restore it, the itunes page says the website has timed out so it won't recover. Can anyone please help me?

When my ipod touch is in recovery mode (when I try to re-store it) the itunes page sayes the website has been timed out and so it won't re-store. There is a limited time, whilst restoring the ipod, it lasts for approx 5 mins, then asks to start again all over again. Can anyone please help me?

This device is not eligible for the requested build (Also sometimes displayed as an "error 3194")
Update to the latest version of iTunes. Mac OS X 10.5.8 (Leopard) users may need to download iTunes 10.6.3.
Third-party security software or router security settings can also cause this issue. To resolve this, followTroubleshooting security software issues.
Downgrading to a previous version of iOS is not supported. If you have installed software to performunauthorized modifications to your iOS device, that software may have redirected connections to the update server (gs.apple.com) within the Hosts file. Uninstall the unauthorized modification software from the computer.
Edit out the "gs.apple.com" redirect from your hosts file, and then restart the computer for the host file changes to take affect. For steps to edit the Hosts file and allow iTunes to communicate with the update server, see iTunes: Troubleshooting iTunes Store on your computer, iPhone, iPad, or iPod—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > The hosts file may also be blocking the iTunes Store. If you do not uninstall the unauthorized modification software prior to editing the hosts file, that software may automatically modify the hosts file again on restart.
Avoid using an older or modified .ipsw file. Try moving the current .ipsw file (see Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations), or try restoring in a new user to ensure that iTunes downloads a new .ipsw.

Scheduling not carried out in BAPI_PROJECT_MAINTAIN

Hi All,
I am facing a problem that while updating the basic start date and basic end date for WBS elements using BAPI_PROJECT_MAINTAIN, the scheduling is not being carried out. Basic dates of WBS Elements are saved properly. But the project start date and end date are not updated accordingly.
I am passing the following inputs:
I_PROJECT_DEFINITION = <Project Number>
I_PROJECT_DEFINITION_UPD-PROJECT_DEFINITION = 'X'.
I_PROJECT_DEFINITION_UPD-START = 'X'
I_PROJECT_DEFINITION_UPD-FINISH = 'X'
I_WBS_ELEMENT_TABLE-WBS_ELEMENT = <WBS element Number>
I_WBS_ELEMENT_TABLE-PROJECT_DEFINITION = <Proj Defination>
I_WBS_ELEMENT_TABLE-WBS_BASIC_START_DATE = <Basic Start Date>
I_WBS_ELEMENT_TABLE-WBS_BASIC_FINISH_DATE = <Basic End Date>
I_WBS_ELEMENT_TABLE_UPDATE-WBS_ELEMENT = 'X'
I_WBS_ELEMENT_TABLE_UPDATE-PROJECT_DEFINITION ='X'
I_WBS_ELEMENT_TABLE_UPDATE-WBS_BASIC_START_DATE = 'X'
I_WBS_ELEMENT_TABLE_UPDATE-WBS_BASIC_FINISH_DATE = 'X'
I_METHOD_PROJECT-REFNUMBER = '00000'.
I_METHOD_PROJECT-METHOD = 'SAVE'.
I_METHOD_PROJECT-REFNUMBER = '00001'.
I_METHOD_PROJECT-OBJECTTYPE= 'WBS ELEMENT'
I_METHOD_PROJECT-METHOD = 'UPDATE'
I_METHOD_PROJECT-OBJECTKEY = <WBS element number>
Please let me know the resolution to this problem.

Hi All,
I am facing a problem that while updating the basic start date and basic end date for WBS elements using BAPI_PROJECT_MAINTAIN, the scheduling is not being carried out. Basic dates of WBS Elements are saved properly. But the project start date and end date are not updated accordingly.
I am passing the following inputs:
I_PROJECT_DEFINITION = <Project Number>
I_PROJECT_DEFINITION_UPD-PROJECT_DEFINITION = 'X'.
I_PROJECT_DEFINITION_UPD-START = 'X'
I_PROJECT_DEFINITION_UPD-FINISH = 'X'
I_WBS_ELEMENT_TABLE-WBS_ELEMENT = <WBS element Number>
I_WBS_ELEMENT_TABLE-PROJECT_DEFINITION = <Proj Defination>
I_WBS_ELEMENT_TABLE-WBS_BASIC_START_DATE = <Basic Start Date>
I_WBS_ELEMENT_TABLE-WBS_BASIC_FINISH_DATE = <Basic End Date>
I_WBS_ELEMENT_TABLE_UPDATE-WBS_ELEMENT = 'X'
I_WBS_ELEMENT_TABLE_UPDATE-PROJECT_DEFINITION ='X'
I_WBS_ELEMENT_TABLE_UPDATE-WBS_BASIC_START_DATE = 'X'
I_WBS_ELEMENT_TABLE_UPDATE-WBS_BASIC_FINISH_DATE = 'X'
I_METHOD_PROJECT-REFNUMBER = '00000'.
I_METHOD_PROJECT-METHOD = 'SAVE'.
I_METHOD_PROJECT-REFNUMBER = '00001'.
I_METHOD_PROJECT-OBJECTTYPE= 'WBS ELEMENT'
I_METHOD_PROJECT-METHOD = 'UPDATE'
I_METHOD_PROJECT-OBJECTKEY = <WBS element number>
Please let me know the resolution to this problem.

When u carry out scheduling (at operation mode)?

Similar Messages

Maybe you are looking for