When unzipping a file I'm getting an Error 1 message - "Operation Not Permitted."

What do I need to do to correct this?

HIi,
Can you post the file with only the board outline?
Tien P.
National Instruments

Similar Messages

  • "at" command line broken in 10.10.3?  I get "at: cannot regain privs: Operation not permitted"

    After updating to Yosemite 10.10.3, I notice that I can't use the "at" command from the command line in my account. I get the error:
        at: cannot regain privs: Operation not permitted
    It does seem to work if I sudo, but I have some scripts which I don't want to change.
    I don't need to do this very often, so something else other than the 10.10.3 update may have triggered this problem.
    Solution?

    Linc,
    I tried creating the at.allow file, and it didn't help. It still gives me the same error message. Any other ideas?

  • My iPhone won't restore. It is in dfu mode and when I try and restore I get an error 21 message. I have tried to reinstall iTunes and disable my security and firewalls. No luck apple say send in for a 348 buck hardware reset/fix. Any thoughts.

    I am open to trying anything. Until I plugged it into computer I just kept getting a apple symbol then it would turn off every five second it would light up then turn off. I man the boost network and don't live near an apple store. 3 hours away! Would Telstra or Optus shop look at it ? Or should I just send it too Apple and pay. It is 14 months old my iPhone 5

    Error 20, 21, 23, 26, 28, 29, 34, 36, 37, and 40
    These errors typically occur when security software interferes with the restore and update process. Use the steps to troubleshoot security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
    Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See the steps under the heading "Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store." If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart.

  • When streaming movies from itunes, I get an error that there is not enough storage

    I stream a movie for my kids and the ipad says that there is not enough storage available. I can stream from Vudu and Netflix with no issues. When I started streaming from itunes, I cannot due to this error.
    Still learning iOS, any help would be greatly appreciated!
    Thank you in advance!

    iTunes Store does not stream movies.

  • Error when unzipping a file

    Im trying to unzip a program to jailbreak my iphone and when i try to unzip the file, i get the following error message.
    Unable to archive "greenpois0n-osx_rc5.zip" into "Downloads".
    (Error 1 - Operation not permitted.)
    How do i unzip this file?

    That's Great! How did you figure it out? I have the same problem.

  • Adobe Acrobat Pro XI 11.0.06 when I reduce file size or try to optimize, I get this error: The document could not be saved. A number is out of range. I do the exact same thing every month and it works. I did it a few days ago and it worked. I receated the

    Adobe Acrobat Pro XI 11.0.06 when I reduce file size or try to optimize, I get this error: The document could not be saved. A number is out of range. I do the exact same thing every month and it works. I did it a few days ago and it worked. I receated the pdf, I renamed it. tried to do it before I imported more pages. no go. the 16 mg pdf will normally reduce to 5 or 6

    Hi,
    Are you facing the issue with any pdf file?
    Please try updating Acrobat to 11.0.7 and check.
    You might also want to repair Acrobat and see.
    Regards,
    Rave

  • I have a .mov file that plays on my mac but when someone tries to play it on a pc, they get an error 128 message. Help!

    I have a .mov file that plays on my mac but when someone tries to play it on a pc, they get an error 128 message. Help! Please!

    This is not the problem. We are using quicktime on the pc's and the mac. I also tried to open the file on the pc with other programs and it doesn't recognize the file. The file opens fine on my mac but I cannot save it as a new file. It says that "the end of the file was reached." The recording was made in iShowU then edited in Quicktime Pro.

  • When i executed this class file  i am getting runtime errors

    when i executed this class file i am getting runtime errors
    code is :
    import java.awt.event.*;
    import java.awt.*;
    public class Test extends Frame
    java.awt.Window w;
         TextField t;
         Test()
         t=new TextField(20);
         add(t);
         addWindowListener(new WindowAdapter()
                             public void windowDeactivated(WindowEvent ev)                               {                    
                                  w.toFront();          
                                  System.out.println("hai");
         setSize(300,300);
         setVisible(true);
    public static void main(String args[])
    Test t =new Test();
    after executing that class i am getting this errors
    Exception occurred during event dispatching:
    java.lang.NullPointerException:
    at WindowEventDemo.windowActivated(WindowEventDemo.java:76)
    at java.awt.Window.processWindowEvent(Window.java:612)
    at java.awt.Window.processEvent(Window.java:576)
    at java.awt.Component.dispatchEventImpl(Compiled Code)
    at java.awt.Container.dispatchEventImpl(Compiled Code)
    at java.awt.Window.dispatchEventImpl(Compiled Code)
    at java.awt.Component.dispatchEvent(Compiled Code)
    at java.awt.EventQueue.dispatchEvent(Compiled Code)
    at java.awt.EventDispatchThread.run(EventDispatchThread.java:68)
    if anybody know how to pls help me

    You are using w that you have not done anything with.
    Add following code to the begining of your cinstructor:
    w = this;
    Then it should work.
    //Anders ;-D

  • When trying to open itoons I get an error message: Program C\program files (x86) R6034  An application has made an attempt to load the C runtime library incorrectly.

    when trying to open itoons I get an error message: Program C\program files (x86) R6034  An application has made an attempt to load the C runtime library incorrectly. Please contact the application's support team for more infomation.

    Hello Michwilltwo,
    It sounds like you are unble to open iTunes after a recent update. I would recommend the troubleshooting steps from the article named:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    "Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly"
    Follow these steps to resolve the issue:
    Check for .dll files
    Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
    If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
    Reboot your computer.
    Note: Depending on your operating system, you may only have one of the listed paths.
    Uninstall and reinstall iTunes
    Uninstall iTunes and all of its related components.
    Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
    Re-download and reinstall iTunes 11.1.4.
    Be sure to follow the instructions as outlined by the links in the article as there is a specific order in which to uninstall iTunes and its associated programs.
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

  • When trying to launch ITunes I get an error message saying that application fail to start because MSVCR80.dll file not found. Reinstalling app may fix problem.

    When trying to launch ITunes I get an error message saying that application fail to start because MSVCR80.dll file not found. Reinstalling app may fix problem.

    I've just (finally) managed to fix this problem today. I checked the Apple Support forums, and it seems a lot of people are having the same problem.
    I rang the Apple Support line, and the very helpful man (thanks Alan!) talked me through it stage by stage. If you go to the following page on the internet: http://support.apple.com/kb/TS5376   it takes you through the process. WARNING - it takes a little time!
    Basically, the first thing you have to do is go to your Program Files and double click on your iTunes folder. There'll be a number of files with the suffix .dll - you need to move all the .dll files from that folder to your desktop - you can simply click and drag them on the desktop..
    Next, uninstall iTunes - go to Control Panel / Add/Rempve Programs and when the list comes up remove iTunes. This will take a few minutes... Then reboot your computer.
    Next, go back to Control Panel / Add Remove and Remove - IN THIS ORDER -
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support
    Reboot again!
    Next, check in your Program Files that the iTunes folder is completely gone - if it has, great: if it hasn't, right-click on the folder and press Shift and Delete - it will say "Are you sure you want to completely remove the folder "iTunes"? Click on "Yes".
    Reboot!
    Then go to the iTunes download page and voila! It should download iTunes without any problems... well it did for me.... Good luck!

  • I try to drag certain loops but when i drop them in i get the error:   Result code = -5000     File = GarageBand-Temp-B262E454.tmp

    I try to drag certain loops but when i drop them in i get the error: 
         Result code = -5000   
         File = GarageBand-Temp-B262E454.tmp

    Hi,
       I've been trying to solve this problem for a school my companey has set up. After some research and looking at a number of similar posts I tracked the problem down to loops that came with jam packs or with apps like soundtrack pro. These loops are located in /Library/audio/appleloops. If you give everyone read and write access to this folder and it items the loops seem to work.
    I also noticed that once the loops were working agin GB had to convert the sample rate so it's possible that it's the sample rate on certain loops that causess the issue or prehaps the need to change the rate.
    Hope this helps.
    Matt Fleming
    (ACSA)

  • When importing photos into iPhoto I get an error Unreadable Files:

    When importing photos into iPhoto I get an error Unreadable Files: The following files could not be imported (they may be an unrecognized file type or the files may not contain valid data).
    I can open the JPG in question with PREVIEW, photoshop etc.. actually if I try to import a photo that I had originally imported it also fails..
    Please help... Thank you..

    I too had this error message (and to be honest, it was becoming a bit of a pain). I resolved it in a slightly different way to Terence.
    I had 10 photos that were allegedly unreadable; however, as Terence rightly says, they are duplicates. When I opened iPhoto I mad a note of each of the files concerned and did a Spotlight search throughout my hard drive.
    For each photo, there were four or five duplicates. I deleted all but one of each of the photos and then reopened iPhoto. No more error message.
    The original problem stemmed from importing my files directly from an external device I was using with a previous computer [that was running XP].
    Anyway, hope this helps.
    Andy

  • When trying to open iphoto I get the error message "You can't open the application iPhoto because it may be damaged or incomplete." How do I fix this and get my photo's back?

    When trying to open iphoto I get the error message "You can't open the application iPhoto because it may be damaged or incomplete." How do I fix this and get my photo's back?

    To re-install iPhoto
    1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
    2a: On 10.5:  Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
    2b: On 10.6: Those receipts may be found as follows:  In the Finder use the Go menu and select Go To Folder. In the resulting window type
    /var/db/receipts/
    2c: on 10.7 they're at
    /private/var/db/receipts
    A Finder Window will open at that location and you can remove the iPhoto pkg files.
    3. Re-install.
    If you purchased an iLife Disk, then iPhoto is on it.
    If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
    If you purchased it on the App Store you can find it in your Purchases List.

  • I keep get an "Error (-50)" message when I log into iTunes on my MAC

    I didn't have this as a problem before, but all of a sudden I cannot log into my iTunes account on my MAC.  When I try to go into Store and then Sign in, I get an "Error (-50)" message.  I have tried going in and changing the parental controls (something I saw elsewhere), but that didn't work.
    I updated both my Mac OS and itunes, but that didn't change anything. I have restarted my computer and even done a hard reset by turning it off.  When I opened iTunes again, before I even did anything, it gave me and "Error (-49)" message. 
    Also, I have some program called Safe-Eyes on my computer as a parental control, and went in and added all the different websites associated with iTunes (per another help page), but that hasn't worked either.
    Because of this, I cannot get any of my songs from iTunes Match, except those that had already been downloaded onto the computer (1/16 of my music library).  Sure I can access them on my iPhone, but now I can't transfer that music onto my Nano.
    One additional note: I saw on the communities the recommendation to delete your iTunes Download file, but I don't appear to have one in my iTunes Media folder. 
    Thanks!

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    The title of the Console window should be All Messages. If it isn't, select
    SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
    View ▹ Show Log List
    from the menu bar at the top of the screen.
    Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    ☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    ☞ Some private information, such as your name, may appear in the log. Anonymize before posting.

  • I have downloaded Adobe Photoshop digitally but when i activated adobe I keep getting this error message Adobe Premiere Elements.exe - NO DISK. There is no disk in the drive. Please insert a disk into drive/device/harddisk/dr1

    I have downloaded Adobe Photoshop digitally but when I activated adobe I keep getting this error message Adobe Premiere.exe - NO DISK - There is no disk in the drive. Please insert a disk into drive/device/harddisk/DR1

    It sounds like you downloaded the wrong application, namely Adobe Premiere Elements.
    If you meant Adobe Photoshop Elements, you're in the wrong forum.  This is not the Elements forum.
    Here's the link to the forum you want:
    https://forums.adobe.com/community/photoshop_elements/content
    If you mean Photoshop proper, since you are posting in the Photoshop forum, give version details and your system specs.
    BOILERPLATE TEXT:
    Note that this is boilerplate text.
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    etc.,
    someone may be able to help you (not necessarily this poster, who is not a Windows user).
    a screen shot of your settings or of the image could be very helpful too.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

Maybe you are looking for

  • Page not printing on Dot Matrix Printer

    Dear Experts, I had requirment to print the PO layout on a stationary which is bigger than a4 and bit lesser than a3 I found that page as 370(Width) and 295(hight). So according to it I created a new page format in SAP coz I didnt have any page forma

  • Closing Rebate Agreement using VBO2

    Hi All I am trying to close rebate agreement using VBO2 transaction. The steps that I am following are as follows 1. Put rebate agreement number 2. Rebate Payments --> Final Settlement --> Using payment screen I am making all the amounts 0. Then Savi

  • How to display 2 lines in the same column header of jTable?

    Please could you help me to display 2 character lines in the same column header of a JTable? And how to make a fusion between to cells? Thank you very much

  • Is adobe Cs4 design premium compatible with macbook pro 2011?

    I just bought a macbook pro 2011, 2.2 ghz quad core i7 to work with my adobe design premium 4. I heard many software have problems with mac os lion. I got so worry and want to return the macbook. Does anyone know if i can run adobe cs4 on this new ma

  • Hyperion Reports COnditional Suppression

    <p>We're trying to build a report using conditional suppressionthat only shows variances over a certain dollar amount. Is there away to create a subtotal just of those variances that still show upon the report?</p>