When updating a meeting it duplicates on recipients calendars

I recently moved over to ical and noticing some kinks. When I send an update on an invite that I edited, the recipients receive an email and asked to accept or decline. When they accept the new updated event it duplicates on their calendar.
I first thought this was because they were on a PC, but the Mac recipients who are using entourage are getting duplicates on their calendar too. I am the main organizer in our office so this creates much confusion. I did not want to be on a Mac using Microsoft software.

I have a similar issue.
I'm using Outlook (Exchange) and iPhone. My wife is also on iPhone. The issue arises when lats say she creates a meeting on her iPhone and invites me also. The initial invite works great and nothing happens. Then when she goes to her PC and changes the event, I get an invite and upon accepting this, I have then a new meeting (a duplicate) but only in Outlook. On my iPhone I can see the latest update. On Outlook however I can see both.
I hate deleting duplicates on my Outlook. Also, I have to look in Outlook which of the meeting I have accepted latest, since if I delete the latest update - iPhone calendar will loose the event. So I have to delete the event in Outlook that I accepted first.
A really annoying issue.
Any ideas?

Similar Messages

HT4623 meet a mistake when updating to ios 7.0, error 14,whats wrong

meet a mistake when updating to ios 7.0, error 14
whats wrong

Try using Settings > General > Reset > Reset All Settings.

Why does the iPod duplicate songs when updating my playlists?

Why does the iPod duplicate songs when updating my playlists? Also, you cannot use the "show duplicate songs" feature on the iPod - I suppose that is because it is not supposed to duplicate songs on the iPod. But, if that is the case - why does it do it?

Try resetting your iPod, press and hold the power and the home buttons together approximately 15 seconds until the Apple logo appears. If that does not work try going into Settings>General>Reset>Reset All Settings. If that does not work try connecting to you iTunes library via the cable and un-sync the library from your iPod then sync the library. For the next 2 options backup your iPod first, then do a Restore iPod from backup, if that doesn't work... As a last resort Restore your iPod as New. I too had the red circle and square after updating to 7.0.4 the last resort fixed mine, others have reported doing all the above, all have had reports of fixing the problem and not fixing it. Give it a try, hopefully one of these works, Good luck.

Updates keep switching from duplicate to extend display

I'm getting a little tired of this. I keep a lot of desktop shortcuts and I keep them arranged in a specific order. Only, every time Microsoft sends me automatic updates it switches me fro "duplicate" displays to "extend" displays. Which
leads to all my shortcuts being stacked up on one side, and 45 minutes of putting everything back where it belongs.
Thanks to the Blue Ray player, I can't just unplug the DVI cable, and I primarily use VGA so that I don't have to switch everything around when I want to use one of my other computers that don't have DVI options. And, YES, I logged in as "Administrator"
and changed things there.
So, either stop changing my settings every time you force me to update, or fix the stupid software that can no longer output Blue Ray video through the VGA signal. Don't even "try" to lie to me and say it's impossible, there was no problem
doing it back when my card didn't have a DVI output.
As it stands, you force me to get a DVI capable because, now that my video card has a DVI output, it is suddenly impossible to output Blue-Ray video over VGA. Then, even though both cables go to the same monitor, Windows 7 "insists"
that the 1366x768 DVI monitor is actually a different resolution than the 1366x768 VGA monitor. Then when I force it to duplicate the display (so I don't have to switch my monitor back and forth just to operate normally,) it decides that I must be mistaken
every time it updates.
f

So far it's happened after every update that requires a restart. If I restart my computer without an update, it doesn't happen. If I have an update that doesn't need to restart my computer, then I later restart my computer manually, it doesn't
happen.
The drivers for my display haven't been updated since I installed them. Just went through the update history to make sure. Checked all that were installed on 11/11/2014 (the last time this happened,) and scanned through all the rest - though
I don't remember which specific ones required a restart or not. Didn't see anything ATI (well AMD now,) in the list. Didn't see anything HP (for the LCD monitor,) either. Those usually appear under "optional" updates which don't
install automatically anyways.
f

When updating my ipad air to iOs 8 my 2 albums on iphoto were deleted since iphoto is no longer supported. Anyone similar experiences? Any chance to get back my albums (not only the pictures, but the actual album with text etc)?

when updating my ipad air to iOs 8 my 2 albums on iphoto were deleted since iphoto is no longer supported. Anyone similar experiences? Any chance to get back my albums (not only the pictures, but the actual album with text etc)?

This blur below copied from here. I made the text bold for emphasis.
Migrating from iPhoto for iOS to Photos on iOS 8 - Apple Support
The following data will migrate from iPhoto to Photos.
Any photos in your iPhoto library that aren't already in Photos are added.
Image adjustments you made in iPhoto are migrated to Photos.
If you applied image adjustments to photos synced to your iOS device from iTunes, a duplicate of each photo will be created in Photos with adjustments applied.
Photos hidden in iPhoto do not appear in the Years, Moments, or Collections views in Photos, but are placed in an album titled Hidden.
Photo Books, Web Journals, and Slideshows are converted into regular albums in Photos. Text and layouts are not preserved.
Only projects created on the device performing the migration will be converted. Projects you synced from other devices to iPhoto via iCloud must be converted from the devices on which they were created.
Photos marked as Favorites in iPhoto are marked as Favorites in Photos.
Tags and captions from iPhoto are not displayed in Photos, but you can use them as search terms and they will show up respectively as Keywords and Titles in Photos search results.
Flags from iPhoto are converted to the keyword Flagged.

Error message when updating Itunes...can not open Itunes program

I am recieving error message when updating Itunes for my computer. The error message reads "MSVCR80.dll is missing and the other error message reads Error 7 (Windows error 126)" I can not open my Itunes. I have reloaded the Itunes onto my computer but still have the same error messages. Please help.

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99364)

IPad app store "unknown error" message when updating app

iPad app store "unknown error" message appears when updating app

Kathryn,
Had the problem also. Found in the forums and it worked for me:
go to settings
go to app store or "store" on my ipad
click on the apple id
sign out
sign in, again with id and password
then do update.
Hope this helps.

HT4623 please help me when update my i phone 3G i finish update but face problem , appear me msg There is no SIM card installed in the iPhone You ar attempting to activate. Please disconnect

please help me < when update my i phone 3G < i finish update but face problem , appear me msg There is no SIM card installed in the iPhone You ar attempting to activate. Please disconnect

Sounds like your phone was hacked to use with your carrier. Updating it has relocked the phone to it's original carrier. You will not get the phone working again without a SIM from the original carrier.

My ITunes got corrupted and I kept getting a message when updating iTunes64msi missing so I uninstalled all files and I thought I removed all registry values but when reinstalling I get an older version is installed and cannot be removed. I need a soluti

My ITunes got corrupted and I kept getting a message when updating iTunes64msi missing so I uninstalled all files and I thought I removed all registry values but when reinstalling I get an older version is installed and cannot be removed. I need a solution.

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

After itunes 6.0.2 and 1-10 updater - both ipods crash itunes when updating

I'm annoyed.
I upgraded my to iTunes 6.0.2 (Windows XP) and ran the 1-10 updater on two ipods - a mini and a 20GB pre-photo model (I guess that's a 3rd gen?). After doing so, iTunes crashes when updating begins. If I plug an ipod in without iTunes, everything is OK and I can see the unit and directory structure in Explorer. When the ipod is disconnected and I run iTunes, everything is fine - no problems. But when you connect an ipod, iTunes sees it, and then shows "Updating ipod", it sits like that for awhile, then I hear the hard drive in the iPod click, and a few seconds later I get:
"iTunes has encountered a problem and needs to close" etc. etc.
I tried doing a restore of one of my ipods (the 3rd gen) to the 2005-11-17 firmware by running that updater and doing "Restore". The problem is still happening, but now my ipod is empty because I did the restore!
Unfortunately, I can't tell what the problem is - iTunes or the 1-10 update.
Has anyone else had any problems like this? Any ideas? Can I downgrade iTunes?
Please help!
Chris

Has anyone come up with a method to resolve this issue? I uninstalled and reinstalled iTunes, and no luck.
One very obvious thing I can see is that 2006-1-10 update clearly bombs iTunes fast. I downgrade my firmware to 2005-11-17 and it appears to want to update. I'm attempting to update again (about the 30th time since I've had this problem a few days ago). Let's see how it goes since I've actually done this before... One thing I'm doing differently though is syncing just the podcasts, no music. It shouldn't make a difference, but maybe there's something odd in there with DRM?
Another observation - when I connected the iPod with the My Computer window open, I saw the H: drive (my ipod) appear for a few seconds. It then disappeared from there, iTunes came up, and then reappeared. iTunes tried to sync, but then bombed out.
I hope this helps someone..
I can't believe that Apple hasn't responded to this issue yet. This has to be impacting more than a few hundred users on this site.

How can I get my iPhone to stop promting me to enter my wife's Apple ID when updating apps? I've checked settings for iTunes

How can I get my iPhone 6 to stop prompting me to enter my wife's Apple ID when updating apps? I have verified in settings that my acct is listed in itunes & App Store, as well as icloud. i can download new apps fine. Have shut down phone and re-powered, have tried plugging into my iMac while signed into my iTunes acct. Can't figure out what to do next?

Is the comp a synced device to your apple ID and approved as an active device for this synchronization?
Just cloud the sync once, activate the comp to your apple I'd in iTunes, ensure all software is up to date, turn on home sharing between the devices and you can reinstall the apps from the apple id purchase history via download.
You basically cleaned out the canonical data apple uses to validate all that, which was backup data. Like iOS devices have the purchased option on the App Store now, syncing the devices via the home sharing and properly activating them will give your comp the purchased cloud and free up 10gs of space on the precious solid states smaller drives.
Hope that helps...
If you need to know the menu to find this info, let me know. But the info is easily accessible in the help menu.

I have bought an iMAC second hand but when updates to purchased (not by me) Apps I cannot download the updates as it is asking for the original owners password. How can I amend this or could I delete the Apps and download new ones in place under my email

I have bought an iMAC second hand but when updates to purchased (not by me) Apps I cannot download the updates as it is asking for the original owners password. How can I amend this or could I delete the Apps and download new ones in place under my email

If the machine was upgraded to Lion 10.7.x by the original owner then you bought an illegal license of Lion and also of any other applications that the seller said came pre-installed, this assumes the seller did not include original install media. In that case you need to contact the seller for the original install DVDs that came with the machine re-install up to Snow Leopard 10.6.8 and then purchase Mountain Lion ($20) and the applications you want or need. If the seller cannot come up with the original install discs then you can buy them from a nominal cost from AppleCare..

IPhone 4s updated with IOS 8. Not the calendar will not show a full list of dates. Instead it shows the whole month with the list of the day selected. I want to have my full list back. So much easier to scroll thru when making appointments.

iPhone 4s just updated with IOS 8. Now my calendar does not offer the full list of items by day on the screen. Instead I see the month and below the month are the appointments in a list for the selected day only. I would like the option to have the full list available as it is much easier to scroll thru the list when making appointments.

Hello memormor,
Thank you for visiting Apple Support Communities.
To see the full scrollable list of events, start from the day view (tap on a day), not the month view, then click .
Calendar at a glance - iPhone
View a list of events. In month view, tap to see a day’s events. In day view, tap .
Take care,
Nubz

HT4623 I lost my maps icon when updating. How can I get it back

When updating the software on my iphone, I skipped the area where you put in your Apple ID. Now I do not have the maps icon. How can I get it back?

Well now I was able to download a back up disc for my windows 8 and try to load it and set the laptop to run the d: drive upon startup and not able to in BIOS can someone do a peint screen of the boot order screen

Error in replicat when updating a row

Oracle 11gR2
OGG 11.1.1.1.5
I am getting the following error when updating a row that exists in both the target and source db:
OCI Error ORA-01403: no data found, SQL <UPDATE....The following is in the discard file:
Record not found
Mapping problem with compressed key update record (target format)...
...The row DOES exist in the target db for sure. But for some reason it thinks that it is not there...why?
Here are the exact steps I did:
1. Created a table in source
2. Create the same table in target (explicitly not through replication as we have an exclude filter on 'CREATE')
3. Inserted rows into source table (which were replicated to target table).
4. Delete a row in the source table (which were not applied to target as I am using the IGNOREDELETE parameter)
5. Update a row in the source table (this is where I got the above mentioned error 'ORA-1403' even though the row does exist.)

mb_ogg is very likely right - you forgot to "add trandata" as that's the number one most common reason for an ORA-1403 (ANSI 100) no data found error.
The problem is that Oracle does not automatically log the PK, it only logs that which changed. Down at the replicat on the target it tries to update but the WHERE clause has PK = NULL because it was not logged in the redo. To have it logged in the redo so that the target UPDATE statement has a correct value for PK, you need to use GGSCI to issue "add trandata," which performs an "ALTER TABLE ADD SUPPLEMENTAL LOG GROUP ... ALWAYS".
"INFO TRANDATA", if using OGG version 11.2+ on Oracle it will tell you if logging is enabled on a table and for which columns.
Good luck,
-joe

When updating a meeting it duplicates on recipients calendars

Similar Messages

Maybe you are looking for