When updating iPod from iTunes receive message that some of the photos cannot be displayed in iPod touch

when syncing iPod Touch from iTunes receive message that some of the photos cannot be displayed in iPod touch

What are the detail? file size?
Since you can't create them in iPhoto, what is the source?  Camera? What processing did you do in iPhoto?
Can you look at the Info for the photos that do sync and those that do not to try to find out why?

Similar Messages

  • Several times I've downloaded albums from iTunes to find that some of the tracks did not get fully downloaded so that the track with skip to the next one. Can someone tell me why this is happening and how I can fix it?

    Several times I've downloaded an album from iTunes to find that not all of the tracks were fully downloaded so that some of the tracks will skip to the next one (instead of finishing the song). Can anyone tell me why this happens and how I can fix it?

    If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copies of the tracks and try redownloading fresh copies.
    Otherwise, I'd report the problem to the iTunes Store.
    Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
    Find the items that are not playing properly. If you can't see "Report a Problem" next to the items, click the "Report a problem" button. Now click the "Report a Problem" links next to the items.
    (Not entirely sure what happens after you click that link, but fingers crossed it should be relatively straightforward.)

  • I can't get new version of itunes to install on Windows 7 64 bit computer. Receive message that reads insufficient privileges to access c:\program files\ipod\bin. Tried to follow some suggestions found here but nothing is working. Any new suggestions?

    I can't get new version of itunes to install on Windows 7 64 bit computer. Receive message that reads insufficient privileges to access c:\program files\ipod\bin. I've followed several threads I've read here but nothing is working.

    For such situation, I'd suggest the following:
    1. Remove current installed office with the fix-it tool in
    KB2739501, and follow the "Remove Office manually" section to make sure there are no remaining files
    2. Either download a trial version of Office 2013 from
    http://office.microsoft.com/, or from
    http://technet.microsoft.com/en-us/evalcenter/jj937170
    3. Reboot your computer in clean boot mode, and run setup again
    Max Meng
    TechNet Community Support

  • HT1351 Whenever I try to sync music to my ipod from itunes, it will go through all the steps up until it actually downloads the music, then it starts, and doesnt move. Why wont it download anything?

    Whenever I try to sync music to my ipod from itunes, it will go through all the steps up until it actually downloads the music, then it starts, and doesnt move. Why wont it download anything?

    Try here:
    iTunes: Error 13019 during sync
    Not updating the iOS should not effect your problem.
    As long as all the apps are in the iTunes library, you will not lose app data by updating the iOS.

  • I created two Aperture libraries from one large library. Some of the photos in library

    I created two Aperture libraries from one large library. Some of the photos I want to keep in library #2 are in the trash of library #1.  If I empty the trash of library #1, will it affect the same photos that were moved to library #2?  I moved over 2,000 photos to create library #2.  Their names are showing in the trash of library #1. 

    Are your images referenced or managed? If your partial libraries are referencing the same original files as the library you exported them from, be careful. Deleting the orignal on one library #1can delete it from the  library #2. But if your originals are managed by Aperture inside the Aperture library, you can delete them.
    I moved over 2,000 photos to create library #2.  Their names are showing in the trash of library #1.
    If you are not sure about referenced or managed, select one of the images you want to keep in the library where they are not in the Trash, then use the command "File > Show in Finder". If you can reveal them in the Finder, they are referenced and probably are shared between your libraries.
    Or turn on "badge referenced files" in the Preferences > Appearance settings. Then your referenced images will show arrow badges.

  • How do i transfer a new album to my iPod from iTunes without overwriting my library on the iPod

    If i try to add a new album or song to my iPod from iTunes all the other data is deleted. How do i do this without having to trasnefer my entire library every time i have new music to add?

    If you sync your iphone, then open itunes, connect iphone, select everything that you want to be on the iphone and sync.
    If you manually manage, then drag and drop what you want.

  • Message no. SOLAR_DOC021: The document cannot be displayed

    Hi All,
    When I am trying to display a document attached to a roadmap, (by double-clicking on it or by clicking the display button) I get the following Error Message: SOLAR_DOC021: "The document cannot be displayed" 
    As adittional information the roadmap is customer specific, The document has not been checked out and we are working on SP16.
    Any hint?
    Thanks,
    Miguel

    Hi,
    Some possibilities;
    could it be that you are using Sapgui 7.10 with Patchlevel 0?
    (i mean no patch applied, just the initial release)
    Unfortunately there was a bug in the intial release of Sapgui 7.10
    (Patchlevel 0), which was solved with patch 1 for Sapgui 7.10.
    The problem was that the access to the windows registry failed using
    function from CL_GUI_FRONTEND_SERVICES.
    But this is needed for opening documents, as the application looks into
    the windows registry to determine which fronted application should
    be started for displaying/editing the document.
    Could you please install Patch >= 1 for Sapgui 7.10 and check whether
    the problem is resolved afterwards?
    note:  #1023083 Registry functions did not work
    Hope this helps.
    Cheers,
    sh

  • I receive an error message that some of the application components are missing when trying to open Photoshop CC 64-bit

    Hi,
    I'm using Windows 8.1 and I can see photoshop CC 64 bit. But when I'm launching it, it throws an error "Some of the application components are missing from the Application directory, Please reinstall the application". I've reinstalled twice but getting the same error. Whereas the 32 bit application works fine. Any help?

    Branching this to a new discussion.
    Govinda_s13 are you still receiving the error messages referenced above?

  • How come when I try to sync photos from iTunes to my iPhone, only half the photos show up?

    All of the photos are compatible (JPEG) for syncing, but only half of them are syncing onto my iPhone 4S.
    I'm using iPhoto 11 to manage my photos.
    Is there something wrong with the actual photos, iPhoto 11, or is it iTunes?

    Has your iPad been synced to a different computer?
    Do you have apps on your iPad that were purchased with a different iTunes account than the one you use on your computer?
    Have your ever successfully synced to your own computer before?

  • When trying to run itune getting message that itunes has stopped working ?

    I am getting following popup message "itunes has stopped working "
    I have downloaded newest version & tried but it is still not working.
    Problem signature:
    Problem Event Name: BEX
    Application Name: iTunes.exe
    Application Version: 10.0.1.22
    Application Timestamp: 4c9c64ce
    Fault Module Name: StackHash_0a9e
    Fault Module Version: 0.0.0.0
    Fault Module Timestamp: 00000000
    Exception Offset: 0800254e
    Exception Code: c0000005
    Exception Data: 00000008
    OS Version: 6.1.7600.2.0.0.256.1
    Locale ID: 1033
    Additional Information 1: 0a9e
    Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
    Additional Information 3: 0a9e
    Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
    My ipod (4th generation;2GB)shuffle has also stopped working.It gets detected on windows explorer shows the content but not playing anything.
    Pl help.

    many thanks. (Haven't seen one of these in a while, and now suddenly there's two in one day.)
    I think some other application (apart from QuickTime itself) has stashed old QuickTime componentry on the PC in an unorthodox location. (Codec packs and video converters are the usual suspects with that, although some games might do the same.)
    So we'll go looking for the older QuickTime componentry in the most common locations for it to be stashed.
    First we'll need to change some view settings.
    In your Start menu, open Computer.
    In your Organise menu, select Folder Options.
    In the View tab, make sure that "Show hidden files and folders" is selected, and Hide extensions for known file types is unchecked.
    Click OK.
    Now in Computer, open your C:\ drive (or whichever drive you have your operating system installed on).
    Open the "Windows" folder.
    *If you have a 32-bit version of Windows,* open the "System32" folder.
    *If you have a 64-bit version of Windows,* open the "SysWOW64" folder.
    What files and folders can you see in there with QuickTime in the title? (In a standard installation of Quicktime you should be seeing precisely two files ... QuickTime.qts and QuickTimeVR.qtx ... and no QuickTime folders whatsoever.)

  • My new Ipod is called "My Ipod" in iTunes, but my computer calls it the same name as my sisters Ipod when it registeres it as a device being plugged in?

    Ipod touch, both my sister and I have 8gbs and are both running Windows 7 home premium. So in iTunes the ipod is called the right thing... but when I am looking at my computers C: D: cd drives and that stuff... The device is listed as hers? E.g. Sisters Ipod?
    Anyone know how to fix this so it will call it the correct name in both iTunes AND my computer devices and storage list?

    Issue resolved. Deleted the ipods drivers completely from my system and auto-reinstalled them. It now shows up with the correct name. Thanks

  • HT201269 I am struggling to synch my iPod from iTunes(on my macbook air) since the volume of data exceeded the capacity of my iPod,any ideas?

    I had no problems with syching my ipod through the USB cable till I updated the OS on my macbook air and also grew my music catalogue on itunes beyond the capacity of the ipod.

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync/delete all music and resync
    To delete all music go to Settings>General>Usage>Storage>Music>Tap edit in upper right and then tap the minus sign by All Music
    - Restore from backup. See:                                                
    iOS: How to back up                                                                                     
    - Restore to factory settings/new iOS device.             

  • HT4623 I have attempted to download the current upgrade about a dozen times. Every time I get to near the end and get an error message that just says the download cannot be completed at this time. What's the deal?

    I am attempting to download the new update for my iPad. It gets approx half thru the process and then I get an error message. States that I cannot
    Download the update at this time. I have done this at least a dozen times. Still cannot complete the update,
    What's the deal?

    either in your anti-virus control panel or your windows control panel, depending on which one you have turned on.

  • Can't access files on my ipod from itunes

    Anyone you understand??
    I can't anymore access my files on my ipod from itunes. I can see what is there, but it won't allow me to delete any files on my ipod.
    At start up, it does the syncronicing, finish in itunes but the display on my ipod never go beyond "do not disconnect". It won't allow me to close/remove the ipod from itunes - error message - some files are in use, can't close down ipod.

    if you sync iPod, you can NOT delete music, podcasts, TV shows or videos in the iPod itself. if you want to delete it from the iPod, either delete it from iTunes and at the next syncing, the file will disappear.
    Sometimes you also simply have to click a second time on the "eject" button after getting the warning that "some files in use".

  • Help! Please I can't copy any songs onto my ipod from itunes.

    Hi, My ipod syncs Ok, but won't copy songs onto my ipod from itunes. I've tried downloading the latest software, but getting nowhere. Any advice would be greatly appreiciated.

    Try restoring your iPod. Restoring will erase the iPod's hard drive, reload the software and put it back to default settings. Once the restore is complete follow the on screen instructions to name the iPod and automatically sync your songs and videos onto the fresh installation. Press Done and the iPod will appear in iTunes and start to sync. If you want to update manually or using selected playlists uncheck the box beside the sync automatically instruction and press Done, it will default to manual mode and you can choose whatever setting you like: Restoring iPod to factory settings with iTunes 7

Maybe you are looking for

  • Export a file from Final Cut Pro for friend in Soundtrack Pro

    I have a video artist who I am helping with audio. At first we just used an omf file that worked great, it's just a pain to get all the levels/automation reset. Is there an easy way to do this with Final Cut to Soundtrack Pro? Thanks a million

  • When connected to NETGEAR WNR1000, I can't remotely access Airport Extreme attached hard drive.

    I have a hard drive connected to my Airport Extreme at home and I am staying at a friend's place where I am connecting to the Internet via a NETGEAR WNR1000 router (which is routing a broadband-cable connection from Comcast Xfinity). When I am connec

  • Order numbers missing.

    Hi All For a requirement of mine i am pulling data from the standard datasource  2LIS_11_VAITM into a DSO..but  the problem is that few of the document numbers are missing and when i  check that in R/3 those numbers are found along with the order qty

  • Help on Call Transformation

    Hi i have created a RFC and thru that i am submitting a report and calling that RFC in my EP. i make use of the FM "WWW_HTML_TO_LISTOBJECT" so that data mirror image of my report is also displayed in my portal. But the problem is i can't control it,

  • Executing system command (third party program) from extend script without showing console on windows

    I am using following code on mac: app.system("/path/to/external/executable &"); It runs external program in background (without showing console/terminal). On windows I tried many things like: app.system('start "" "/path/to/external/executable"'); app