When updating to PV2012, is it expected to see modifications in existing tone curves?

Just looking for clarifiication here: I realize PV2012 must make adjustments in order to emulate previous editing.
When I update the process version of a previously processed image I notice the tone curve is changed as well. Is that typical?
Thanks,
Bob

rjmooreii wrote:
Thanks for that, Rob.
You're welcome .
rjmooreii wrote:
but with the Shadows boosted a notch. This is what spurred my question.
There may be something going on that I am not aware of. If difference is +/- 1 it could be chalked up as numerical roundoff, but if more than that, then it sounds like there is something else going on that I am not aware of, in which case consider posting examples that include numerical values.
Thanks for bringing this to my/our attention.
Rob

Similar Messages

I am getting an un expected error message when updating the setting to "extend network". Is there an obvious setting I may be missing? Cisco router being used.

I am getting an un expected error message when updating the setting to "extend network". Is there an obvious setting I may be missing? Cisco router being used.

If you are trying to "extend" using wireless only, you may not be aware that Apple designed the "extend" feature as a proprietary setting to only work with other Apple routers.
It is extremely unlikely that this will work with a Cisco router.
If your plans call for connecting the AirPort Express to the Cisco router using a wired Ethernet connection, it should be possible to configure the Express that way.

When should I expect to see firmware update 1.1.1???

when should I expect to see firmware update 1.1.1???

It seems unlikely that they would phase it out on their own; see the recent European rollouts announced. I agree that it may go the way of the Newton, but that only based on Apple not updating the phone, fixing/patching. The Newton was an amazing device, it just never worked quite right. I had one. The iPhone is the same...sadly I have one of those too. I truley hope Apple continues to invest in the iPhone and evolve it into the phone some designer envisioned day one.

Today at 8am est my card was charged but when checking order status it saids expected ship date not available at this time and it also saids we received your order and it is in process . payment not taken yet

today at 8am est my card was charged but when checking order status it saids expected ship date not available at this time and it also saids we received your order and it is in process . payment not taken yet
but card was charged full amount and i havent gotten anything else been checking for update all day and got nothing i did order iphone 6 plus at 3:01am and everything went through and i was finsihed at 3:06am

chriss2633,
I know how exciting it is to have all the information on the new phone. I did send you a Direct Message. Can you please respond back to that message? Looking forward to hearing back from you.
KevinR_VZW
Follow us on Twitter @VZWSupport

Can't use the keyboard shortcuts in Photoshop CS6 when updating Mavericks

Can't use the keyboard shortcuts in Photoshop CS6 when updating Mavericks

Thanks everyone. What worked for me was a version of the suggestions above. I had the problem with the ≠ character appearing in all my Photoshop CS6 keyboard shortcuts and rendering them largely unusable. However, I don't have any other keyboards besides US English enabled on my Mac. I do have Spell Catcher installed, which works through the keyboard input method. So, I switched from Spell Catcher back to English (with the US flag), launched Photoshop and presto, my keyboard shortcuts were restored, absent that obnoxious ≠ symbol. Once in Photoshop, if I reselect Spell Catcher, the ≠ symbol returns so I have to run Photoshop without the help of Spell Catcher - or forego the use of keyboard shortcuts while it's on. Since the developer of Spell Catcher passed away last year there will be no more updates to the otherwise very useful utility. Apparently this keyboard shortcut problem in the various guises reported here is linked to some element of the OS X input method in Mavericks, as Photoshop seems to manifest the issue in relation to one specific input source or another. This is the first application in my experience to have a problem with Spell Catcher in OS X 10.9. So I will continue to use it, except in Photoshop. Spell Catcher was never updated for Mountain Lion or Mavericks so people like me will have to use it "at our own risk" as the saying goes. Be that as it may, it does appear to be a bug in Photoshop that's at the root of this matter as different people have somewhat different problems with the OS X input method - not that I expect either Adobe or Apple to do anything about it.

EF ProviderManifestToken issue when updating ODAC Beta 3 to final release

Hi everybody,
We're using ODAC (connecting to a Oracle 9i) with VS2010, developing with .NET Framework 4 using Entity Framework. We started our developments using ODAC Beta 1, and we have been updating the ODAC every time that a new Beta was released and everything was going like expected, but we're having trouble with the last update, from ODAC Beta 3 to the final release (11.2.0.3). Note that we have only one ODAC installed at the time, for every update we first uninstall the old release, then we install the new ones and finally we update the application references to the new Oracle.DataAccess.dll.
The first error occurred when the application attempt to access the DB, the message we got was: "+ProviderManifestToken no es válido+" ("*ProviderManifestToken is not valid*") .
We tried updating the model (EDMX) from the database (the only change made was an update in the EDMX SSDL content from ProviderManifestToken="9i" to ProviderManifestToken="9.2"), then another error came out: "+El esquema especificado no es válido. Errores: Modelo.ssdl (2,93) : error 0169: Los artefactos SSDL deben tener como destino el mismo proveedor. ProviderManifestToken '9i' es diferente de '9.2' que se encontró antes.+" (something like "*The specified schema is not valid. All SSDL artifacts must target the same provider. The ProviderManifestToken '9i' is different from '9.2' that was encountered earlier.*"). We did some research about this error, but couldn’t find any solution... does anyone know how the update from Beta 3 to Final Release should be done? are we missing any configuration?
Thanks in advance!
Lucas

ODAC Beta 3 (11.2.0.2.50) starts to use two most-significant digits of an Oracle database version number for ProviderManifestToken.
You have no problem with ODAC Beta 3 by modifying '9i' to '9.2' for ProviderManifestToken. But when updating ODAC Beta 3 to final release (11.2.0.3) and doing the same modifications, the said "another error" occurs. That seems to indicate the issue is not about ProviderManifestToken itself.
I am wondering if there are different store schemas in your edmx file and the error is caused by schema filtering.
For example, having differnet store schemas for the Schema= like below.
<EntitySet Name="Categories" EntityType="Model.Store.Categories" store:Type="Tables" Schema="USER1" />
<EntitySet Name="Customers" EntityType="Model.Store.Customers" store:Type="Tables" Schema="USER2" />
Can you please check it?
Another question is: Can you regenerate the edmx file using the final release (11.2.0.3)?
This is the preferable way.
Edited by: shsu on Mar 1, 2012 12:32 PM

Error when updating Client Access Front End Service to Exchange 2013 Update 6

When updating to Exchange 2013 Update 6 we received the following error at the Step 11 of 13: Client Access role: Client Access Front End service step:
Error:
The following error was generated when "$error.Clear();
$fe = get-ActiveSyncVirtualDirectory -server $RoleFqdnOrName -DomainController $RoleDomainController -ErrorAction SilentlyContinue;
if ($fe -eq $null)
new-ActiveSyncVirtualDirectory -DomainController $RoleDomainController -Role ClientAccess;
else
update-ActiveSyncVirtualDirectory $fe -DomainController $RoleDomainController -InstallIsapiFilter $true
" was run: "System.Management.Automation.ParameterBindingException: Cannot convert 'System.Object[]' to the type 'Microsoft.Exchange.Configuration.Tasks.VirtualDirectoryIdParameter' required by parameter 'Identity'. Specified method is not supported. ---> System.NotSupportedException: Specified method is not supported.
at System.Management.Automation.ParameterBinderBase.CoerceTypeAsNeeded(CommandParameterInternal argument, String parameterName, Type toType, ParameterCollectionTypeInformation collectionTypeInfo, Object currentValue)
--- End of inner exception stack trace ---
at System.Management.Automation.Internal.PipelineProcessor.SynchronousExecuteEnumerate(Object input, Hashtable errorResults, Boolean enumerate)
at System.Management.Automation.PipelineOps.InvokePipeline(Object input, Boolean ignoreInput, CommandParameterInternal[][] pipeElements, CommandBaseAst[] pipeElementAsts, CommandRedirection[][] commandRedirections, FunctionContext funcContext)
at System.Management.Automation.Interpreter.ActionCallInstruction`6.Run(InterpretedFrame frame)
at System.Management.Automation.Interpreter.EnterTryCatchFinallyInstruction.Run(InterpretedFrame frame)".
Problem was that if you have more than one ActiveSyncVirtualDirectory, the installer for Update 6 fails because it's not expecting an array of virtual directories to be returned. Solution is to remove the "extra" virtual directory, perform the
installation, and then re-add the virtual directory.
None of the other types of virtual directories are susceptible to this, only ActiveSync.

Hi,
Please try to reset registrar state:
http://tsoorad.blogspot.in/2013/04/lync-2013-ee-pool-wont-start.html
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
Kent Huang
TechNet Community Support

Feature Request: Import Sidecars When Updating PSE 8 Catalog

I am working to get a usable Lightroom catalog when updating from PSE 8. I have tens of thousands of raw files, several thousand video files in the catalog, almost all of which have an accompanying THM and/or XMP file in the same Windows folder as the photo or video file. PSE, of course, doesn't deal with sidecars, but I would have expected Lightroom to check for the sidecar, just as it does with a regular import of those files. Or at least allow you to ask it to discover sidecars from the library menu after the catalog has been updated.
I would re-import the files to get the metadata from the sidecars, but then I would lose all the tags, captions and other metadata I've built up in the PSE catalog. Lightroom doesn't give the option to "Read Metadata from File" for video files, but when I use on my raw files, it does not attempt to discover any existing sidecar files. The XMP sidecars would be especially helpful because they contain the PSE data (including date/time changes, keywords, etc.) for both raw and video files as written out by PSEDBtool from John Ellis.
If multiple sidecars are available for a file (e.g. both a THM and an XMP), I would hope that Lightroom would read both in date order, and apply the metadata in that order. That is, if the THM is older, read and use that metadata, and then read the XMP, updating any data supplied in that file, so that we get the benefit all all the data available. In the cases above, there is a lot of camera data in the THM for the video files that is not in the AVI, MOV or XMP files, so I wouldn't want to lose that.

John - Thanks for your helpful responses. A couple answers to your questions:
I do have XMP sidecars for my raw (and video) files, courtesy of psedbtool. In addition, most of my raw (and video) files have a .THM file associated with them from the camera itself. I have done very little with ACR in PSE 8, so I don't believe I have any XMP files from that source.
After converting my PSE 8 catalog to LR 3, I do not see any sidecar extensions in the LR 3 metadata pane, which is leading me to believe that LR 3 has ignored both the XMP and THM sidecars (I would have expected to see both listed). If I instead import the raw files directly, rather than through the PSE 8 catalog upgrade, then I see both XMP and THM sidecars listed in the EXIF metadata pane. For raw files, I can't be sure that the sidecars are not being read, because the camera data in them is duplicated in the raw file, and other data such as keywords may be coming straight from the PSE catalog.
By analogy, when I import video files with sidecars directly into LR, the sidecar metadata (both THM and XMP) is definitely imported to LR from the sidecars because that data does not exist in the video file, but it shows up in the LR metadata panel. If I instead upgrade the PSE catalog containing the videos, only the bare-bones file data comes in with the video files - none of the EXIF data from the sidecars comes in. LR doesn't even set a valid capture time for sorting in the grid view.
So I am drawing a conclusion that the PSE sidecar raw behavior is the same as the video behavior in this case. John - are you seeing sidecar extensions in the metadata panel in LR from imported raw files?
Thanks!
Jon

JTextPane inside JScrollPane resizing when updated

Hiya all,
I've been struggling with this problem and checking the forums, but didn't find a solution, so I hope someone can help...at least help me for the nice picture :) It has to do with JTextPane's automatically resizing to their content on a GUI update, rather than scrollbars appearing (the desired result).
Basically, I have a scenario where I am creating a series of multiple choice answers for a question. Each answer consists of a JTextPane inside a JScrollPane, and a JRadioButton, which are all contained in a JPanel (called singleAnswerPanel). So for 2 answers, I would have 2 of these singleAnswerPanels. There is a one large JPanel that contains all the singleAnswerPanels (called allAnswersPanel). This allAnswersPanel is contained in a JScrollPane. Graphically, this looks like:
   |       JPanel (allAnswersPanel) inside a JScrollPane            |
   |                                                                |
   | ------------------------------------------------------------ |
   | |     JPanel (singleAnswerPanel)                             | |
   | |    ----------------------------------                      | |
   | |   | JTextPane inside a JScrollPane |     * JRadioButton | |
   | |    ----------------------------------                      | |
   | |                                                            | |
   | ------------------------------------------------------------ |
   |                                                                |
   |                                                                |
   | ------------------------------------------------------------ |
   | |     JPanel (singleAnswerPanel)                             | |
   | |    ----------------------------------                      | |
   | |   | JTextPane inside a JScrollPane |     * JRadioButton | |
   | |    ----------------------------------                      | |
   | |                                                            | |
   | ------------------------------------------------------------ |
   |                                                                |
    ----------------------------------------------------------------So above, I show 2 answers that can be filled in with text. So assuming both answer JTextPanes are filled with text beyond their current border (scrollbars appear as expected) and the user wishes to add more answers. I have a button to add another singleAnswerPanel to the containing JPanel (allAnswersPanel), and then I validate the main JScrollPane that contains the allAnswersPanel as it's view. The problem that occurs is the existing single answer JTextPanes resize to the size of their text and the vertical scrollbars (only vertical ones setup) of the JTextPanes dissappear! My intent is to keep the existing JScrollPanes the same size (with their scrollbars) when a new answer is added.
The code snippet below shows what gets done when a new answer is added:
private void createAnswer()
    // The panel that will hold the new single answer JTextPane pane
    // (inside a JScrollPane) and radio button.
    JPanel singleAnswerPanel = new JPanel();
    // Create the text pane for the single answer.
    JTextPane singleAnswerTextPane = new JTextPane();
    Dimension dimensions = new Dimension(200, 30);
    singleAnswerTextPane.setPreferredSize(dimensions);
    singleAnswerTextPane.setMaximumSize(dimensions);
    // Create a scroll pane and add the single answer text pane.
    JScrollPane singleAnswerScrollPane =
     new JScrollPane(singleAnswerTextPane);
    // Create a radio button that is associated with the single
    // answer text pane above.
    JRadioButton singleAnswerRadioButton = new JRadioButton();
    // Add the scroll pane and radio button to the panel (for a single
    // answer).
    singleAnswerPanel.add(singleAnswerScrollPane);
    singleAnswerPanel.add(singleAnswerRadioButton);
    // Add the panel holding a single answer to the panel holding
    // all the answers.
    m_allAnswersPanel.add(singleAnswerPanel);
    // Update the display. m_allAnswersScrollPane is a JScrollPane
    // that has the m_allAnswersPanel (JPanel) as its view.
    m_allAnswersScrollPane.validate();
}     Sorry for the length of the message, but I really want to solve this problem. So again, when updating the JScrollPane with validate(), the JTextPane for a single answer resizes to it's contents (plain text currently) and loses it's vertical scrollbars, but I want it to stay the same size and maintain the scrollbars.
Thanks!

http://java.sun.com/docs/books/tutorial/uiswing/mini/layout.htmlimport javax.swing.*;
import javax.swing.event.*;
import javax.swing.table.*;
import java.awt.*;
import java.awt.event.*;
import java.util.Random;
public class Test extends JFrame {
    int cnt=0;
    Random r = new Random();
    String[] nouns = {"air","water","men","idjits"};
    JPanel mainPanel = new JPanel(new GridBagLayout());
    JScrollPane mainScroll = new JScrollPane(mainPanel);
    JScrollBar mainScrollBar = mainScroll.getVerticalScrollBar();
    public Test() {
     setDefaultCloseOperation( JFrame.EXIT_ON_CLOSE );
     Container content = getContentPane();
     content.add(new JLabel("QuizMaster 2003"), BorderLayout.NORTH);
     content.add(mainScroll, BorderLayout.CENTER);
     JButton jb = new JButton("New");
     content.add(jb, BorderLayout.SOUTH);
     jb.addActionListener(new ActionListener() {
         public void actionPerformed(ActionEvent ae) {
          JPanel questionPanel = new JPanel(new GridBagLayout());
          questionPanel.add(new JLabel("Question "+cnt++),
               new GridBagConstraints(0,0,1,1,0.0,0.0,
                    GridBagConstraints.EAST, GridBagConstraints.NONE,
                    new Insets(1,2,1,2),0,0));
          questionPanel.add(new JLabel("Why is there "+
                        nouns[r.nextInt(nouns.length)]+"?"),
               new GridBagConstraints(1,0,1,1,0.0,0.0,
                    GridBagConstraints.EAST, GridBagConstraints.NONE,
                    new Insets(1,2,1,2),0,0));
          JTextArea jta = new JTextArea();
          JScrollPane jsp = new JScrollPane(jta);
          jsp.setPreferredSize(new Dimension(300,50));
          questionPanel.add(jsp, new GridBagConstraints(0,1,2,1,0.0,0.0,
                    GridBagConstraints.EAST, GridBagConstraints.BOTH,
                    new Insets(1,2,1,2),0,0));
          mainPanel.add(questionPanel, new GridBagConstraints(0,cnt,1,1,0.0,0.0,
                        GridBagConstraints.EAST,GridBagConstraints.NONE,
                        new Insets(0,0,0,0),0,0));
          mainPanel.revalidate();
          mainScroll.getViewport().setViewPosition(new Point(0, mainPanel.getHeight()));
     setSize(400,300);
     show();
    public static void main( String args[] ) { new Test(); }
}

Problems when updating to mountain lion?

I am currently at OSX 10.6.8. What kind of problems can I expect when updating to Mountain Lion?

If your Mac is capable of running Mountain Lion, has at least 4GB of RAM, and a decent amount of available free space, the update should go quite smoothly for the average user.

Error message when updating Itunes...can not open Itunes program

I am recieving error message when updating Itunes for my computer. The error message reads "MSVCR80.dll is missing and the other error message reads Error 7 (Windows error 126)" I can not open my Itunes. I have reloaded the Itunes onto my computer but still have the same error messages. Please help.

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99364)

IPad app store "unknown error" message when updating app

iPad app store "unknown error" message appears when updating app

Kathryn,
Had the problem also. Found in the forums and it worked for me:
go to settings
go to app store or "store" on my ipad
click on the apple id
sign out
sign in, again with id and password
then do update.
Hope this helps.

HT4623 please help me when update my i phone 3G i finish update but face problem , appear me msg There is no SIM card installed in the iPhone You ar attempting to activate. Please disconnect

please help me < when update my i phone 3G < i finish update but face problem , appear me msg There is no SIM card installed in the iPhone You ar attempting to activate. Please disconnect

Sounds like your phone was hacked to use with your carrier. Updating it has relocked the phone to it's original carrier. You will not get the phone working again without a SIM from the original carrier.

My ITunes got corrupted and I kept getting a message when updating iTunes64msi missing so I uninstalled all files and I thought I removed all registry values but when reinstalling I get an older version is installed and cannot be removed. I need a soluti

My ITunes got corrupted and I kept getting a message when updating iTunes64msi missing so I uninstalled all files and I thought I removed all registry values but when reinstalling I get an older version is installed and cannot be removed. I need a solution.

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

After itunes 6.0.2 and 1-10 updater - both ipods crash itunes when updating

I'm annoyed.
I upgraded my to iTunes 6.0.2 (Windows XP) and ran the 1-10 updater on two ipods - a mini and a 20GB pre-photo model (I guess that's a 3rd gen?). After doing so, iTunes crashes when updating begins. If I plug an ipod in without iTunes, everything is OK and I can see the unit and directory structure in Explorer. When the ipod is disconnected and I run iTunes, everything is fine - no problems. But when you connect an ipod, iTunes sees it, and then shows "Updating ipod", it sits like that for awhile, then I hear the hard drive in the iPod click, and a few seconds later I get:
"iTunes has encountered a problem and needs to close" etc. etc.
I tried doing a restore of one of my ipods (the 3rd gen) to the 2005-11-17 firmware by running that updater and doing "Restore". The problem is still happening, but now my ipod is empty because I did the restore!
Unfortunately, I can't tell what the problem is - iTunes or the 1-10 update.
Has anyone else had any problems like this? Any ideas? Can I downgrade iTunes?
Please help!
Chris

Has anyone come up with a method to resolve this issue? I uninstalled and reinstalled iTunes, and no luck.
One very obvious thing I can see is that 2006-1-10 update clearly bombs iTunes fast. I downgrade my firmware to 2005-11-17 and it appears to want to update. I'm attempting to update again (about the 30th time since I've had this problem a few days ago). Let's see how it goes since I've actually done this before... One thing I'm doing differently though is syncing just the podcasts, no music. It shouldn't make a difference, but maybe there's something odd in there with DRM?
Another observation - when I connected the iPod with the My Computer window open, I saw the H: drive (my ipod) appear for a few seconds. It then disappeared from there, iTunes came up, and then reappeared. iTunes tried to sync, but then bombed out.
I hope this helps someone..
I can't believe that Apple hasn't responded to this issue yet. This has to be impacting more than a few hundred users on this site.

When updating to PV2012, is it expected to see modifications in existing tone curves?

Similar Messages

Maybe you are looking for