When updating withhold tax window error---"This Property Cannot be Updated"

Dear All,
We have upgraded SAP 8.8 PL14 from SAP 2007B. With respect to TDS, we have upgraded based on the TDS Utiltiy Upgrade. Everything upgraded Properly. But, when we try to edit or change on Withholding tax definition or TDS account, an error is coming "This Property Cannot be Updated". Becoz of this we are not able to continue the entry on Particular Section. We are not able to add new WH Code also, since the same error is coming.
Pl help and sugges how to solve this.
Thanks.
Komanduri

DEAR
if u still face teh error then i would request you to please raise a support ticket for ant Case related to TDS as that would be supported by sap only however the other way around but that would not be correct is to make a new WT code with the differnt code but by doing this when the user would sit down for reconciliation he would not be able to do so as the error would be somewhat "cannot use two WT code category
Regards,
Manish

Similar Messages

When trying to edit metadata, I get an error "This property cannot be modified."

I took some photos with my iPhone 4, copied them to my desktop, and now I want to remove the GPS metadata from a few of them.
I tried to remove the properties directly in Windows 7, but I get an error saying "An error occurred when writing the property 'Latitude' to the file 'filename'."
So I decided to try it in Bridge CS5. I selected the photo, went to the metadata panel, double clicked the location under Latitude, and I get an error saying "This property cannot be modified."
Thank you for your help!

According to Adobe staff (see link http://forums.adobe.com/thread/830277?tstart=0) the GPS data format in Bridge is based on Adobe
Extensible Metadata Platform(XMP) standard. The only supported format is GPS format
dd,mm.mmmmW.
Have never used this so not sure what mmmmW represents.

When starting I get an error: "This operation cannot be completed because of an internal failure. A secure network communication has not been cleaned up correctly. "

Each time I start up Firefox 4.0b6 I am getting the following error message: "This operation cannot be completed because of an internal failure. A secure network communication has not been cleaned up correctly. ". I run Firefox 3.6 as my standard Firefox browser in paralell.

See https://bugzilla.mozilla.org/show_bug.cgi?id=588511
(please do not comment in bug reports)

HT1925 I am trying to open Itunes after an upgrade to itunes--it won't open and now says MSVCR80.dll is missimng. Where do I get this missing DLL. Also says Error 7 when trying to open (windows error 126)?? I am on Windows 7 if that matters.Help please

I am trying to open Itunes after an upgrade to itunes--it won't open and now says MSVCR80.dll is missimng. Where do I get this missing DLL. Also says Error 7 when trying to open (windows error 126)?? I am on Windows 7 if that matters.Help please

See the user tip: https://discussions.apple.com/docs/DOC-6562 for the most complete information.

Withholding Tax Object Error

I've upgraded SAP from 2007B PL:10 to 8.8 PL:16.
But during AP Invoice creation the system shows "Object Reference not set to an instance of an object"
This error comes for the creditors whose Withholding Tax is checked.
Can anyone plz guide me the tables related to Withholding Tax
for that this problem is arising. Basically I needed to update data in OWHT table
it may be required to update in other table also.
Subrata

Hi,
when you upgrade sap from 2007 to 8.8 , you need to use tds upgrade utility to updgrade tds to 8.8.
Download upgrade utility from below link:
http://www.sdn.sap.com/irj/sdn/index?rid=/library/uuid/108fc2b8-fc8e-2c10-cd84-ae04ee061e24
check for step by step procedure in the documents in downloaded files of upgrade utility.
Thanks,
Neetu

U530 Touch - Audio DRIVER ERROR - This device cannot start (Code 10) - Windows 7

U530 - High definition audio device - ERROR - This device cannot start (Code 10) Windows 7, please see the picture
Picture link (hosted on photobucket.com)
I got all drivers up to date including the BIOS, everything is working fine (the sound works, microphone works...) but this error is kind of annoying to my eyes so if anyone know how to fix it please help.
I tried to uninstall this and let windows update install it again => not worked, same problem.
I tried to re-install the Realtek driver (uninstall - restart machine - install - restart machine) => same problem
And another probelm which has not been solved yet is the Bluetooth icon keep blinking on battery mode (windows 7), you can see more in this thread

What kind of reinmstall did you perform? If you used the recovery media, then this will be pretty simple. Boot to the recovewry media again and this time select the Reinstall drivers and applications option. Find the audio driver on the list of available drivers, put a tick in the box to its left and then click on the install button in the lower right hand corner of the window. The driver will be installed. Your list will be different than the following one, but this is only an example.

I have a new iPod touch and when I connect it to my pc and itunes, a window says "this ipod cannot be used because the Apple Mobile Device Service is not started."

I have a new iPod touch and when I connect it to my pc and itunes, a window says "this ipod cannot be used because the Apple Mobile Device Service is not started."

This might help restart it http://support.apple.com/kb/TS1567

Job Mgmt : error "This component cannot be used" when sending job request

Hi,
When i try to create a job request (basic job request link from the Job Management Workcenter), I am having an error : "This component cannot be used".
It seems the component is the number read from the ibase corresponding to the client and the sid. There seems to be ne problem on this side.
But everything is correctly setup regarding Ibases and components.
What's more when trying to create a ZLFJ (duplicated from SLFJ) in CRMD_ORDER, there is no problem.
Any suggestion where it could come from ?

Hello Hervé ,
could you please provide me with some more information?
When exactly do you get the message? When trying to submit the job request? Or when clicking on the link "Create Job Request" in the workcenter?
If you get the message when submitting, please provide more information on the entered System (IBase). Maybe a screenshot could help.
Best regards,
Jonny

Was just watching an HD movie and tried to resize the window midway through. Now I get the error "This movie cannot be played in HD on this display" Yes it can I just was. How do I fix this?

Was just watching an HD movie and tried to resize the window midway through. Now I get the error "This movie cannot be played in HD on this display" Yes it can I just was. How do I fix this?

I have the same problem on an original iPad.

Launch Error - This file cannot be launched

Hi all,
I renamed a class file in a flash build and now every time I try to debug my project (cmd+F11) I get an error window saying Launch Error - This file cannot be launched.
I have tried wiping the project and moving the files in to a new one and also restarting FB4 but with no luck. I have also tried setting up a brand new blank project and this will not launch either.
The problem seems to only be with Flash projects as a new Flex project runs ok.
I am running Flash Builder 4 , Flash CS5 on a Mac 10.6.4 and debugging in Google Chrome 7.0.517.41
Any suggestions?
Cheers

There is no adl listed in my list of active processes in Activity Monitor. I have tried rebooting my machine, restarting all my software and projects and cleaning my projects. No luck yet.
If I just switch to flash and run the fla directly it works fine so it must be Flex specific.
Cheers for the suggestionsso far . Keep em coming if you have them

Editing Error - This Image cannot be rendered for editing...

Editing Error - This Image cannot be rendered for editingbecause Aperture doesn't support the image format.
Thats the message that appears when I'm exporting to Photoshop CS5 (I tried CS4 too), or even other Plug-ins such as Silver Efex Pro...
That had never happened before, and I use Aperture for over 2 years.
Its RAW image format from the same camera and all, nothing has changed. just randomly decided not to export anymore to other programs, Regular exporting works, so it's nothing to do with exporting it self, but the communication between aperture and other softwares, I think.
I've seen some other people having the same problem, does anyone have a take on it, in how to solve this? I can't edit anymore outside of aperture. (of course not including the idea of exporting and doing everything away from aperture, which is totally not viable with the amount of content to be edited and not being in aperture anymore.)
I've tried deleting the preferences, tried repair permissions of the Library, and still didn't work.
Didn't go to the other 2 options (repair and rebuild database) because it would take days if chosen, and still not sure that would solve. or if has anything to do with.
Any light anyone?

What kind of file is it? (i.e.jpeg, Canon RAW, Nikon RAW etc..)
As a workaround until you get the issue fixed, why not reimport the image from the original file, lift and stamp any adjustments you've made in Aperture, and see if the same problem occurs?
A

In formcentral, why does the "proceed to checkout" button not work? on IE I get error " This content cannot be displayed in a frame...

In formcentral, why does the "proceed to checkout" button not work? on IE I get error " This content cannot be displayed in a frame. To help protect the security of information you enter into this website, the publisher of this content does not allow it to be displayed in a frame ". On Chrome I get nothing but loading.

Hi,
This error is generally specific to Internet Explorer and has two possible causes. The most likely explanation is that your browser has unusual browser security settings. I would recommend you try
resetting your security settings to defaults (varies by version but all essentially the same). You may also have to turn off
Protected Mode which is enabled by default on some systems. If you’re seeing this error (or a version of it) outside Internet Explorer, you may have a server-level setting that is preventing your content from being framed.
Reference:https://social.technet.microsoft.com/Forums/exchange/en-US/1460c5a5-6242-4402-9f6b-bc581bf56478/content-cannot-be-displayed-in-a-frame-when-trying-to-add-item?forum=sharepointgeneral
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Eric Tao
TechNet Community Support

Import org.mozilla.javascript.Context; !!ERROR This import cannot be resol.

Hello to All,
I am attempting to use an open source program for speech recognition and several "training" files for the program have a number of
import org.mozilla.javascript.Context;imports that bring the error "This import cannot be resolved"
I know for an import to work it must be part of the "package" or "API" from Sun.
I am using javasdk1.5.0, Eclipse 3.1 and Ant.
So, What do I have to do to actually "import the org.mozilla.javascript"????
This must be a very simple answer but I have not had much understanding here.
Thanks for the help!
Chetanji
Edited by: Chetanji on May 4, 2008 11:28 AM

Thanks tschodt,
That would have been the answer, except I did some more googling right after my question was asked and found that I needed the js.jar.
I looked in the jsapi.jar and found it was already there.
So I built it and much of the "red" disappeared from the project in Eclipse.
I know now I must reorganize the project, as the imports are calling for files that cannot be found, that happen to be elsewhere or not in the build path.
Bringing Unix/Linux OpenSource into Windows is usually tricky, but well worth the investment in time spent.
I give you the Duke as you were correct and the only one to answer.
Blessings,
Chetanji

HT1339 Error: This game cannot be launched. Ipod will not respond

I have an error message on my iPod classic. It states, Error: This game cannot be launched. And now my iPod wheel will not respond. I am unable to shut it down or connect it to my iTunes.

Try a hard reset. This procedure does not erase any content stored on the device. It is similar to rebooting your PC. To reset the iPod, first make sure the hold switch is in the Off position, then press and hold both the Select (Center) and Menu buttons together long enough for the Apple logo to appear.
B-rock

Protection Error - This application cannot continue because another application with an identical serial number is already running on another computer on your network

I attempted to open Final Cut Express this morning and got the message, "Protection Error - This application cannot continue because another application with an identical serial number is already running on another computer on your network".
I have no other FCE on any computers...this is the only mac running (iMac 2008 model). I used a preference manager app and deleted preferences...didn't work. I uninstalled and reinstalled FCE...didn't work.
This is the first time I have used FCE since installing the Yosemite OS, so I'm thinking perhaps that has something to do with it.
Any ideas?

There have been recent posts appearing about your problem. I'm not sure if anyone has found a solution.
FCE was abandoned by Apple years ago, and they are currently making Operating Systems without regard to how it impacts FCE.
countrynewsman wrote:
I uninstalled and reinstalled FCE...didn't work.
That is what I would try - a fresh install - but your need to use FCS remover (from the same software source as Preference Manager) to make sure you get all traces of your existing installation off the drive prior to doing the installation:
http://www.digitalrebellion.com/fcsremover/
If you use FCS Remover, and reinstall the other problem may be that Apple has apparently removed the Software Upgrade to FCE 4.0.3.
So unless you have a 4.0.3 install disk, or you hadn't upgraded past the version number of the install disk you do have, you legacy projects may be tagged as being created with a later version than you have and not open.
Hope it works out for you.
MtD

When updating withhold tax window error---"This Property Cannot be Updated"

Similar Messages

Maybe you are looking for