When upgrading failover pairLast week I had to upgrade ASA5510

Hardware:   ASA5510, 1024 MB RAM, CPU Pentium 4 Celeron 1600 MHz
Internal ATA Compact Flash, 256MB
BIOS Flash M50FW016 @ 0xfff00000, 2048KB
Encryption hardware device : Cisco ASA-55x0 on-board accelerator (revision 0x0)
                             Boot microcode        : CN1000-MC-BOOT-2.00
                             SSL/IKE microcode     : CNLite-MC-SSLm-PLUS-2.03
                             IPSec microcode       : CNlite-MC-IPSECm-MAIN-2.06
                             Number of accelerators: 1
0: Ext: Ethernet0/0         : address is f0f7.55f3.25be, irq 9
1: Ext: Ethernet0/1         : address is f0f7.55f3.25bf, irq 9
2: Ext: Ethernet0/2         : address is f0f7.55f3.25c0, irq 9
3: Ext: Ethernet0/3         : address is f0f7.55f3.25c1, irq 9
4: Ext: Management0/0       : address is f0f7.55f3.25bd, irq 11
5: Int: Not used            : irq 11
6: Int: Not used            : irq 5
Licensed features for this platform:
Maximum Physical Interfaces       : Unlimited      perpetual
Maximum VLANs                     : 50             perpetual
Inside Hosts                      : Unlimited      perpetual
Failover                          : Disabled       perpetual
VPN-DES                           : Enabled        perpetual
VPN-3DES-AES                      : Enabled        perpetual
Security Contexts                 : 0              perpetual
GTP/GPRS                          : Disabled       perpetual
AnyConnect Premium Peers          : 2              perpetual
AnyConnect Essentials             : Disabled       perpetual
Other VPN Peers                   : 250            perpetual
Total VPN Peers                   : 250            perpetual
Shared License                    : Disabled       perpetual
AnyConnect for Mobile             : Disabled       perpetual
AnyConnect for Cisco VPN Phone    : Disabled       perpetual
Advanced Endpoint Assessment      : Disabled       perpetual
UC Phone Proxy Sessions           : 2              perpetual
Total UC Proxy Sessions           : 2              perpetual
Botnet Traffic Filter             : Disabled       perpetual
Intercompany Media Engine         : Disabled       perpetual
This platform has a Base license.
Serial Number: JMX1619X0C7
Running Permanent Activation Key: 0xe309e24d 0x50896012 0x98b3ad80 0x98445458 0x0615368e
Configuration register is 0x1
Configuration has not been modified since last system restart.
ciscoasa# ac
ciscoasa# activati
ciscoasa# activation-key e309e24d 50896012 98b3ad80 98445458 0615368e
Validating activation key. This may take a few minutes...
The requested key is the SAME as the flash permanent activation-key.
The flash activation key will not be modified.
ciscoasa#
I would like to the ASA5510 Base license upgrade to Security Plus license. But after the upgrade is still the license of the Base
I think I was wrong option selected in the process of upgrading, how should I do to be successful upgrade

Hi Desh,
The key which you have used for activation is the same key that is exist in the ASA. So ASA will not have any changes when you give the same key which is already installed. You should have the different key which should be an licensed key for sec plus bundle.
Serial Number: JMX1619X0C7
Running Permanent Activation Key: 0xe309e24d 0x50896012 0x98b3ad80 0x98445458 0x0615368e
Configuration register is 0x1
Configuration has not been modified since last system restart.
ciscoasa# ac
ciscoasa# activati
ciscoasa# activation-key e309e24d 50896012 98b3ad80 98445458 0615368e
Validating activation key. This may take a few minutes...
The requested key is the SAME as the flash permanent activation-key.
The flash activation key will not be modified.
ciscoasa#
Please do rate if the given information helps.
By
Karthik

Similar Messages

Hard Drive warning when upgrading to Mountain Lion. 2 try and I was able to upgrade. Software update for IPhoto, had problems restarting. Do I need my hard drive checked

Hard Drive warning when upgrading to Mountain Lion. 2nd try and I was able to upgrade. Software update for IPhoto, had problems restarting. Do I need my hard drive checked

Yes.
Choose Apple menu > Restart. Hold down the Command (⌘) and R keys as your computer restarts.
When you see a white screen with an Apple logo in the middle, you can release the keys.
Click Disk Utility, and then click Continue.
In the list at the left, select the item you want to repair. (Be sure to select an item that’s indented to the right in the list, not an item at the far left.)
Click First Aid.
If Disk Utility tells you the disk is about to fail, back it up and replace it. You can’t repair it.
Click Repair Disk.
If Disk Utility reports that the disk appears to be OK or has been repaired, you’re done.
Otherwise, you may need to do one of the following steps.
If Disk Utility can’t repair your disk or it reports “The underlying task reported failure,” try to repair the disk or partition again. If that doesn’t work, back up as much of your data as possible, reformat the disk, reinstall Mac OS X, and then restore your backed-up data.
If you continue to have problems with your disk, it may be physically damaged and need to be replaced

Has anyone had aperture lose your album content when upgrading from aperture 2 to 3?

I was using Aperture 2 then wanted to get all my pictures to iphoto, so I upgraded to aperture 3 to so the databases would be swapable to iphoto. In that process up updating Aperture all of my photos are still in aperture, but all of my albums are now empty. So I lost all of my organization. Any ideas what happened and how I can undo it? I did not have a time machine backup and did not backup the database before the upgrade.

You may try to repair your Aperture Library. This should have been done before upgrading, because a corruption of the library can cause problems when upgrading, but perhaps you can still fix the missing albums. Use the Aperture Library First Aid tools (see: Repairing and Rebuilding Your Aperture Library: Aperture 3 User Manual) to repair permissions and repair the database, or to rebuild it, if necessary. But make a backup of the library, before doing this, just to be safe.
Regards
Léonie

SIP stops when upgrading from ASA from 8.4.1 to 8.4(2)8 w/ out config change? Why?

I have to be missiong something small in my config.
If I upgrade my ASA 5510 which I am routing and NATing off of, from 8.4.1 to 8.4.2.8, SIP stops. All phones go dead.
If I roll bck to 8.4.1, SIP comes up.,... Go bck to 8.4(2)8 nd SIP goes down.....
This is without mking any config changes.
I have looked at it so long, I must be overlooking something simple, simple, simple...

Have spent sIx hours in past 24 w/ Cisco TAC and they have a tin of caps as have I but can't figure out why there is a denial of SIP from inside outside and outside inside to/from sip providers three IP addresses. Have created new access lists, new access groups to allow all 3 ip's in & out, increased timeout, bypassed IPS, have both sip UDP & tcp allowed in/out, specified inspection to approve any any for all sip protocols in/out to/from Lync & mediation and nada.
To answer another question, yes I'm certain config doesn't change... I reloaded tge same running config from a bkup just to make sure.....
What I see in the logs coming in/out is the call does make it all the way through the SSM to the ASA..
What happens there is the head scratcher...
SiP even though allowed and even though I've specified it to push through inspection On ASA side is denied based on inspection rule...
I also tried using another one of my (unused) public IPs for only SIP thinking that maulybe there was a core conflict with multiple services NATd to the same public IP but that also did nothing.
On topology I only have a single location so I'm using my 5510 to route as well...
Have 1 IIS web server l, SQL, (ports clised except to obe vendor and am allowing via access list by their IP and ipsec,) Exchange, Lync, Ironport, Endpoint and everything else is 80/80...
Everything is on Server 08r2 w/ exception of web server and two boxes ( one stand-alone & one VM on hyper-v) I am running Server8 for Microsoft TAP engineering / validation airlift. Neither of those are attached to UC/UM at all...
I'm using dynect from dyndns for outside network web services and just piggybacking on time Warner metro e for internal (no physical DNS server)
When I look at caps everything is identical in the tcp and UDP trace even on sip except for the denial...
Which caps/logs would 'y'all like to see and I'll post em when I get home....
Is there a link to bug notes Jullio? Is it sip specific? Any possibility of it being just a name/cosmetic big I can force a work around to?
I recall when Asa first was released I had to specify port 25 allow instead of being able to simply say allow smtp .. That took 2 weeks but it allowed for a work around so whatever I can do/try I'm willing!! Someone may wanna tell TAC if it's a bug because after 6 hours yesterday they are saying there's not a bug... :)
Thanks all!!!!

Error in "tempInit" when upgrading Flash MX AS2 FLA to Flash CS6 AS3 FLA

I experienced a compiler error in "tempInit" when upgrading an AS2 project to AS3. "tempInit" is something internal to Flash Authoring, because it doesn't exist in my project and other people have gotten the same error.
I've read about this problem, and everyone thought it was because of an instance with a bad name, such as one that includes spaces or equals a keyword or something like that, and people have shot down the idea that the problem is with the library symbol, but I'm convinced now that it's a corrupted library symbol. Here's why:
I had 8 instances of a particular movie clip on stage, each on a different frame.
When I deleted the symbol from the library, the compiler error went away (but so did my stage instances). So that simply tells me that the problem is with that particular clip (I originally had to delete each clip in my library one at a time and recompile to determine the offending clip), but that obviously didn't rule out the name problem since the stage instances get removed when I deleted the corresponding library symbol. Still, I knew it couldn't be a name problem, because all instances had a valid name "mainidea".
I ruled out the name problem by creating a new library symbol identical to the first (it's just a few text fields with a rectangle drawn around them). Without changing the names of the existing instances on stage, I used the "swap" button to swap in the new library symbol. The use count on the old one dropped to zero, and the use count on the new one went up to 8. The compiler error was gone, and it only went away once the use count for the old symbol was zero.
The old and new library symbols are identical as far as I can see. Same child objects at the same positions, same textfield content, same child instance names, no ActionScript code, etc. Since there was no discernible difference, I came to the conclusion that the original library symbols had somehow been corrupted under the hood, somewhere in the pipeline between opening an old Flash MX file and setting the flash player version to 11.4 and selecting AS3 as the script language. Somewhere in that process, the Flash Authoring environment screwed something up. Does anyone know anything about this problem?
I have hundreds of files I need to upgrade, and that symbol was copied to each of them as they were created years ago, and I think I'm going to experience this problem with all of them. It's time-consuming to duplicate the old symbol and replace all the instances for every single file, so I'm trying to find the source of the problem and a workaround to avoid it.

It works, but slowly as if somer AS1 code is interpreted into
very
ineffective machine code by AS2 interpretor
My question was if it is know which particular AS1 features
have these
problems in AS2
"ggshow" <[email protected]>
ÓÏÏÂÝÉÌ/ÓÏÏÂÝÉÌÁ
× ÎÏ×ÏÓÔÑÈ
ÓÌÅÄÕÀÝÅÅ:
news:f17r79$efu$[email protected]..
> some AS1 not working when the movie run in AS2...
> if you want to publish it as AS2, then write it in AS2.
>
> * it is time to learn AS3
>

Gui Buttons don't press when upgrading from 1.1.8 to 1.4.0

We are upgrading an application from 1.1.8 to 1.4.0 and the Gui button's do not work. I believe it is due to some sort of focus problem (and parent windows) but cannot get it to break in a simple test application. Just wondering if anyone else has had gui problems when upgrading to 1.4.0. If I recompile back to 1.1.8 it works great.
Thanks.

wow that's odd...almost sounds like you have a transparent window that is over the buttons so it intercepts the mouse events. Would have to see some code but it really sounds like it's the code and not the jvm....if it were, I would think alot of people would be screaming.

Outlook Integration - Snapshot templates missing when upgrade to 8.8 PL14

hello all,
We have a problem when upgrade from B1 8.8 PL10 to PL14, the snapshot template missing. We had no problems to generate snapshots in B1 8.8 PL10.
All the snapshot templates has been installed on <Servername>\B1_SHR\AddOn\Microsoft Outlook Integration\Templates\Default
And in the -GoTo meny- and select -create default templates- could not be started.
Grateful for all help.

Hi Jorg,
I quote a solution for similar case but the solution is based on client PC :
OI: Failed to create snapshot template in client machine
Symptom
You start up Outlook integration Addon in client machine. When you want to create a snapshot template, you get an error that can not create it.
Other terms
SAP Business One, Add-on, Outlook integration, OI, snapshot template, Index, Host, U_Host, BOOSTP , failed to create
Reason and Prerequisites
The index on user defined table [@BOOSTP] is not right. It does not include column U_Host.
Solution
You can run below script to fix it,
IF EXISTS (SELECT 1 FROM CUFD
WHERE AliasID = 'Host'
and TableID = '@BOOSTP')
BEGIN
IF EXISTS (SELECT name FROM sys.indexes
WHERE name = N'@BOOSTPBOOSTPI1')
DROP INDEX [@BOOSTP].[@BOOSTPBOOSTPI1]
IF EXISTS (SELECT name FROM sys.indexes
WHERE name = N'BOOSTPI1')
DROP INDEX [@BOOSTP].[BOOSTPI1]
ALTER TABLE [@BOOSTP] ALTER Column U_Host nvarchar(200)
CREATE INDEX BOOSTPI1
ON [@BOOSTP](U_TplName, U_Language, U_CatID, U_Host)
IF NOT EXISTS (SELECT 1 FROM UKD1
WHERE tableName = N'@BOOSTP' and SubKeyId = 3)
Insert into UKD1 values('@BOOSTP',0,3,'Host')
END
ELSE
Print 'There is no U_Host column in @BOOSTP table!'
if the above solution can't solve it, log a message to SAP support.
JimM

When upgrading to ios5 not all my pictures came back. Now instead of Camera Roll it says progress-sync and every picture I have says saving and I can't send. My albums are empty. Help?

When upgrading to ios5 none of my pictures came back to albums. I don't have anything in albums, not even the camera roll albumn with pictures I have taken since. I can get to the handful of pictures I have taken by going to camera, but it says "progress-sync" where it used to say camera roll. Now every picture I take has a saving photo on it and it won't let me do anything like email it, etc. It also is not showing up in albumns. How do I fix this? What happened? Help?

I had a simialar problem with mine, but my Cameral Roll at least was there. Hopefully you have been keeping a copy of your camera roll. I back mine up to my PC every now and then. If you did not, you might want to try a RESTORE to try to get back the Camera Roll.
As for the other Picture sync, I had to create a new directory on my PC and then resyng this NEW directory....BUT NOW I have TWO identical directories on my phone, which I am trying to resolve, but AT LEAST I can carry my sync photos around with me until I get one of the directories eliminated.
Next time I WONT be so quick to jump on the next Apple OS update!

Lots of warnings when upgrading ghc and haskell libraries

Heres the list of packages I upgraded today:
cups 1.5.3-4 1.5.3-5 -0.73 MiB 6.87 MiB
ghc 7.4.1-2 7.4.2-1 6.09 MiB 60.13 MiB
haskell-mtl 2.0.1.0-4 2.1.1-1 0.43 MiB 0.19 MiB
haskell-random 1.0.1.1-1 1.0.1.1-2 -0.05 MiB 0.29 MiB
haskell-syb 0.3.6-1 0.3.6.1-1 0.06 MiB 0.21 MiB
haskell-transformers 0.2.2.0-4 0.3.0.0-1 2.39 MiB 0.58 MiB
haskell-utf8-string 0.3.7-1 0.3.7-2 -0.04 MiB 0.20 MiB
haskell-x11 1.5.0.1-3 1.6.0-1 1.96 MiB 1.82 MiB
haskell-x11-xft 0.3.1-3 0.3.1-4 0.01 MiB 0.09 MiB
libcups 1.5.3-4 1.5.3-5 -0.01 MiB 0.28 MiB
libmysqlclient 5.5.24-1 5.5.25-1 0.00 MiB 2.97 MiB
mysql 5.5.24-1 5.5.25-1 0.57 MiB 8.45 MiB
mysql-clients 5.5.24-1 5.5.25-1 0.00 MiB 0.81 MiB
xmobar 0.14-2 0.15-1 0.08 MiB 0.45 MiB
xmonad 0.10-3 0.10-4 0.09 MiB 0.71 MiB
xmonad-contrib 0.10-3 0.10-4 0.76 MiB 4.32 MiB
And here is some of the warnings I got when upgrading:
==> Unregistering cabalized packages...
unregistering xmonad-0.10 would break the following packages: xmonad-contrib-0.10 (ignoring)
unregistering X11-1.5.0.1 would break the following packages: X11-xft-0.3.1 (ignoring)
==> Done.
( 3/16) upgrading ghc [########################################################################################] 100%
==> All cabalized packages need to be reinstalled now.
==> See /usr/share/haskell/ and ghc-pkg list --user for a tentative list of affected packages.
ghc-pkg: cannot find package transformers-0.2.2.0
error: command failed to execute correctly
( 4/16) upgrading haskell-transformers [########################################################################################] 100%
Reading package info from stdin ... done.
Warning: Cannot read X11-xft/X11-xft.haddock:
Interface file is of wrong version: X11-xft/X11-xft.haddock
Skipping this interface.
Warning: Cannot read X11/X11.haddock:
Interface file is of wrong version: X11/X11.haddock
Skipping this interface.
Warning: Cannot read mtl/mtl.haddock:
Interface file is of wrong version: mtl/mtl.haddock
Skipping this interface.
Warning: Cannot read random/random.haddock:
Interface file is of wrong version: random/random.haddock
Skipping this interface.
Warning: Cannot read syb/syb.haddock:
Interface file is of wrong version: syb/syb.haddock
Skipping this interface.
Warning: Cannot read utf8-string/utf8-string.haddock:
Interface file is of wrong version: utf8-string/utf8-string.haddock
Skipping this interface.
ghc-pkg: cannot find package mtl-2.0.1.0
error: command failed to execute correctly
( 5/16) upgrading haskell-mtl [########################################################################################] 100%
Reading package info from stdin ... done.
Warning: Cannot read X11-xft/X11-xft.haddock:
Interface file is of wrong version: X11-xft/X11-xft.haddock
Skipping this interface.
Warning: Cannot read X11/X11.haddock:
Interface file is of wrong version: X11/X11.haddock
Skipping this interface.
Warning: Cannot read random/random.haddock:
Interface file is of wrong version: random/random.haddock
Skipping this interface.
Warning: Cannot read syb/syb.haddock:
Interface file is of wrong version: syb/syb.haddock
Skipping this interface.
Warning: Cannot read utf8-string/utf8-string.haddock:
Interface file is of wrong version: utf8-string/utf8-string.haddock
Skipping this interface.
ghc-pkg: cannot find package random-1.0.1.1
error: command failed to execute correctly
( 6/16) upgrading haskell-random [########################################################################################] 100%
Reading package info from stdin ... done.
Warning: Cannot read X11-xft/X11-xft.haddock:
Interface file is of wrong version: X11-xft/X11-xft.haddock
Skipping this interface.
Warning: Cannot read X11/X11.haddock:
Interface file is of wrong version: X11/X11.haddock
Skipping this interface.
Warning: Cannot read syb/syb.haddock:
Interface file is of wrong version: syb/syb.haddock
Skipping this interface.
Warning: Cannot read utf8-string/utf8-string.haddock:
Interface file is of wrong version: utf8-string/utf8-string.haddock
Skipping this interface.
ghc-pkg: cannot find package syb-0.3.6
error: command failed to execute correctly
( 7/16) upgrading haskell-syb [########################################################################################] 100%
Reading package info from stdin ... done.
Warning: Cannot read X11-xft/X11-xft.haddock:
Interface file is of wrong version: X11-xft/X11-xft.haddock
Skipping this interface.
Warning: Cannot read X11/X11.haddock:
Interface file is of wrong version: X11/X11.haddock
Skipping this interface.
Warning: Cannot read utf8-string/utf8-string.haddock:
Interface file is of wrong version: utf8-string/utf8-string.haddock
Skipping this interface.
WARNING: cache is out of date: /usr/lib/ghc-7.4.2/package.conf.d/package.cache
use 'ghc-pkg recache' to fix.
ghc-pkg: cannot find package utf8-string-0.3.7
error: command failed to execute correctly
( 8/16) upgrading haskell-utf8-string [########################################################################################] 100%
WARNING: cache is out of date: /usr/lib/ghc-7.4.2/package.conf.d/package.cache
use 'ghc-pkg recache' to fix.
Reading package info from stdin ... done.
Warning: Cannot read X11-xft/X11-xft.haddock:
Interface file is of wrong version: X11-xft/X11-xft.haddock
Skipping this interface.
Warning: Cannot read X11/X11.haddock:
Interface file is of wrong version: X11/X11.haddock
Skipping this interface.
ghc-pkg: cannot find package X11-1.5.0.1
error: command failed to execute correctly
( 9/16) upgrading haskell-x11 [########################################################################################] 100%
Reading package info from stdin ... done.
Warning: Cannot read X11-xft/X11-xft.haddock:
Interface file is of wrong version: X11-xft/X11-xft.haddock
Skipping this interface.
ghc-pkg: cannot find package X11-xft-0.3.1
error: command failed to execute correctly
(10/16) upgrading haskell-x11-xft [########################################################################################] 100%
Reading package info from stdin ... done.
(11/16) upgrading libmysqlclient [########################################################################################] 100%
(12/16) upgrading mysql-clients [########################################################################################] 100%
(13/16) upgrading mysql [########################################################################################] 100%
(14/16) upgrading xmobar [########################################################################################] 100%
ghc-pkg: cannot find package xmonad-0.10
error: command failed to execute correctly
(15/16) upgrading xmonad [########################################################################################] 100%
Reading package info from stdin ... done.
xmonad-0.10: Warning: haddock-interfaces: /usr/share/doc/xmonad-0.10/html/xmonad.haddock doesn't exist or isn't a file
xmonad-0.10: Warning: haddock-html: /usr/share/doc/xmonad-0.10/html doesn't exist or isn't a directory
ghc-pkg: cannot find package xmonad-contrib-0.10
error: command failed to execute correctly
(16/16) upgrading xmonad-contrib [########################################################################################] 100%
Reading package info from stdin ... done.
xmonad-contrib-0.10: Warning: haddock-interfaces: /usr/share/doc/xmonad-contrib-0.10/html/xmonad-contrib.haddock doesn't exist or isn't a file
xmonad-contrib-0.10: Warning: haddock-html: /usr/share/doc/xmonad-contrib-0.10/html doesn't exist or isn't a directory
I haven't restarted yet to see if xmonad still works, but I'm a little apprehensive after seeing this output
EDIT: Added code tags
Last edited by cmm7825 (2012-10-12 00:15:32)

Recompiling xmonad was a no-go for me after updating with
pacman -Syyu
I had errors
[root@luderro hal]# pacman -Syyu
:: Synchronizing package databases...
core 103.7 KiB 301K/s 00:00 [############################################################] 100%
extra 1404.9 KiB 1173K/s 00:01 [############################################################] 100%
community 1680.9 KiB 1409K/s 00:01 [############################################################] 100%
:: Starting full system upgrade...
resolving dependencies...
looking for inter-conflicts...
Targets (11): ghc-7.4.2-1 haskell-mtl-2.1.1-1 haskell-random-1.0.1.1-2 haskell-syb-0.3.6.1-1 haskell-transformers-0.3.0.0-1 haskell-utf8-string-0.3.7-2
haskell-x11-1.6.0-1 haskell-x11-xft-0.3.1-4 xmobar-0.15-1 xmonad-0.10-4 xmonad-contrib-0.10-4
Total Download Size: 69.00 MiB
Total Installed Size: 867.50 MiB
Net Upgrade Size: 11.79 MiB
Proceed with installation? [Y/n] y
:: Retrieving packages from extra...
ghc-7.4.2-1-x86_64 60.1 MiB 2.25M/s 00:27 [############################################################] 100%
haskell-transformers-0.3.0.0-1-x86_64 591.9 KiB 803K/s 00:01 [############################################################] 100%
haskell-mtl-2.1.1-1-x86_64 195.9 KiB 401K/s 00:00 [############################################################] 100%
haskell-random-1.0.1.1-2-x86_64 300.7 KiB 509K/s 00:01 [############################################################] 100%
:: Retrieving packages from community...
haskell-syb-0.3.6.1-1-x86_64 216.9 KiB 450K/s 00:00 [############################################################] 100%
haskell-utf8-string-0.3.7-2-x86_64 208.8 KiB 495K/s 00:00 [############################################################] 100%
haskell-x11-1.6.0-1-x86_64 1860.3 KiB 1672K/s 00:01 [############################################################] 100%
haskell-x11-xft-0.3.1-4-x86_64 93.1 KiB 283K/s 00:00 [############################################################] 100%
xmobar-0.15-1-x86_64 461.8 KiB 703K/s 00:01 [############################################################] 100%
xmonad-0.10-4-x86_64 730.5 KiB 995K/s 00:01 [############################################################] 100%
xmonad-contrib-0.10-4-x86_64 4.3 MiB 2.30M/s 00:02 [############################################################] 100%
(11/11) checking package integrity [############################################################] 100%
(11/11) loading package files [############################################################] 100%
(11/11) checking for file conflicts [############################################################] 100%
(11/11) checking available disk space [############################################################] 100%
==> Unregistering cabalized packages...
unregistering X11-xft-0.3.1 would break the following packages: xmonad-contrib-0.10 (ignoring)
unregistering transformers-0.2.2.0 would break the following packages: xmonad-0.10 mtl-2.0.1.0 (ignoring)
unregistering syb-0.3.6 would break the following packages: X11-1.5.0.1 (ignoring)
==> Done.
( 1/11) upgrading ghc [############################################################] 100%
==> All cabalized packages need to be reinstalled now.
==> See /usr/share/haskell/ and ghc-pkg list --user for a tentative list of affected packages.
ghc-pkg: cannot find package transformers-0.2.2.0
error: command failed to execute correctly
( 2/11) upgrading haskell-transformers [############################################################] 100%
Reading package info from stdin ... done.
Warning: Cannot read X11-xft/X11-xft.haddock:
Interface file is of wrong version: X11-xft/X11-xft.haddock
Skipping this interface.
Warning: Cannot read X11/X11.haddock:
Interface file is of wrong version: X11/X11.haddock
Skipping this interface.
Warning: Cannot read mtl/mtl.haddock:
Interface file is of wrong version: mtl/mtl.haddock
Skipping this interface.
Warning: Cannot read random/random.haddock:
Interface file is of wrong version: random/random.haddock
Skipping this interface.
Warning: Cannot read syb/syb.haddock:
Interface file is of wrong version: syb/syb.haddock
Skipping this interface.
Warning: Cannot read utf8-string/utf8-string.haddock:
Interface file is of wrong version: utf8-string/utf8-string.haddock
Skipping this interface.
ghc-pkg: cannot find package mtl-2.0.1.0
error: command failed to execute correctly
( 3/11) upgrading haskell-mtl [############################################################] 100%
Reading package info from stdin ... done.
Warning: Cannot read X11-xft/X11-xft.haddock:
Interface file is of wrong version: X11-xft/X11-xft.haddock
Skipping this interface.
Warning: Cannot read X11/X11.haddock:
Interface file is of wrong version: X11/X11.haddock
Skipping this interface.
Warning: Cannot read random/random.haddock:
Interface file is of wrong version: random/random.haddock
Skipping this interface.
Warning: Cannot read syb/syb.haddock:
Interface file is of wrong version: syb/syb.haddock
Skipping this interface.
Warning: Cannot read utf8-string/utf8-string.haddock:
Interface file is of wrong version: utf8-string/utf8-string.haddock
Skipping this interface.
ghc-pkg: cannot find package random-1.0.1.1
error: command failed to execute correctly
( 4/11) upgrading haskell-random [############################################################] 100%
Reading package info from stdin ... done.
Warning: Cannot read X11-xft/X11-xft.haddock:
Interface file is of wrong version: X11-xft/X11-xft.haddock
Skipping this interface.
Warning: Cannot read X11/X11.haddock:
Interface file is of wrong version: X11/X11.haddock
Skipping this interface.
Warning: Cannot read syb/syb.haddock:
Interface file is of wrong version: syb/syb.haddock
Skipping this interface.
Warning: Cannot read utf8-string/utf8-string.haddock:
Interface file is of wrong version: utf8-string/utf8-string.haddock
Skipping this interface.
ghc-pkg: cannot find package syb-0.3.6
error: command failed to execute correctly
( 5/11) upgrading haskell-syb [############################################################] 100%
Reading package info from stdin ... done.
Warning: Cannot read X11-xft/X11-xft.haddock:
Interface file is of wrong version: X11-xft/X11-xft.haddock
Skipping this interface.
Warning: Cannot read X11/X11.haddock:
Interface file is of wrong version: X11/X11.haddock
Skipping this interface.
Warning: Cannot read utf8-string/utf8-string.haddock:
Interface file is of wrong version: utf8-string/utf8-string.haddock
Skipping this interface.
ghc-pkg: cannot find package utf8-string-0.3.7
error: command failed to execute correctly
( 6/11) upgrading haskell-utf8-string [############################################################] 100%
Reading package info from stdin ... done.
Warning: Cannot read X11-xft/X11-xft.haddock:
Interface file is of wrong version: X11-xft/X11-xft.haddock
Skipping this interface.
Warning: Cannot read X11/X11.haddock:
Interface file is of wrong version: X11/X11.haddock
Skipping this interface.
ghc-pkg: cannot find package X11-1.5.0.1
error: command failed to execute correctly
( 7/11) upgrading haskell-x11 [############################################################] 100%
Reading package info from stdin ... done.
Warning: Cannot read X11-xft/X11-xft.haddock:
Interface file is of wrong version: X11-xft/X11-xft.haddock
Skipping this interface.
ghc-pkg: cannot find package X11-xft-0.3.1
error: command failed to execute correctly
( 8/11) upgrading haskell-x11-xft [############################################################] 100%
Reading package info from stdin ... done.
( 9/11) upgrading xmobar [############################################################] 100%
ghc-pkg: cannot find package xmonad-0.10
error: command failed to execute correctly
(10/11) upgrading xmonad [############################################################] 100%
Reading package info from stdin ... done.
xmonad-0.10: Warning: haddock-interfaces: /usr/share/doc/xmonad-0.10/html/xmonad.haddock doesn't exist or isn't a file
xmonad-0.10: Warning: haddock-html: /usr/share/doc/xmonad-0.10/html doesn't exist or isn't a directory
ghc-pkg: cannot find package xmonad-contrib-0.10
error: command failed to execute correctly
(11/11) upgrading xmonad-contrib [############################################################] 100%
Reading package info from stdin ... done.
xmonad-contrib-0.10: Warning: haddock-interfaces: /usr/share/doc/xmonad-contrib-0.10/html/xmonad-contrib.haddock doesn't exist or isn't a file
xmonad-contrib-0.10: Warning: haddock-html: /usr/share/doc/xmonad-contrib-0.10/html doesn't exist or isn't a directory
The solution I found was to uninstall/reinstall everything which depends on ghc:
pacman -Qi ghc
pacman -Rdd ghc haskell-mtl haskell-random haskell-syb haskell-transformers haskell-utf8-string haskell-x11 haskell-x11-xft xmonad xmonad-contrib <any other dependencies here>
pacman -Syyu ghc haskell-mtl haskell-random haskell-syb haskell-transformers haskell-utf8-string haskell-x11 haskell-x11-xft xmonad xmonad-contrib <any other dependencies here>
Probably not ideal, but the digging I did to use ghc to fix the problem turned up nothing.
By the way, a litmus test to determine if your Haskell setup is sane:
xmonad --recompile
should not return any errors.
Last edited by hal (2012-06-13 18:51:15)

Topic Text disappears when upgrading to RoboHelp 7

When upgrading a French webhelp project from RoboHelp 5 to
RoboHelp 7, the topic text is deleted in context-sensitive help
topics. When you click the Help button in the application, the
topic appears, but is blank. When I rechecked the input, the topic
was also blank. The topic appears just fine in both the input and
the output prior to the upgrade of the project.
These topics upgrade just fine in the US English version of
the same webhelp project. Does that mean that the translated French
project must be retranslated from the upgraded US English version
instead of just upgrading it directly? Any ideas would be greatly
appreciated.

Hi gomayfield
You would do well to examine the HTML code behind these
"blank" topics. I recently was assisting someone that upgraded to
RoboHelp 7 and they had some blank topics. Upon closer examination,
there was a substantial amount of text in the topic. Somehow, some
odd coding had caused RoboHelp to insert a closing Body tag. This
rendered the topic blank in the Design view.
Cheers... Rick

Solution Manager ChaRM Issues when Upgrading Satellite System

When upgrading a satellite system that is connected to Solution Manager's Change Request Management, is there anything that we need to be aware of?
Will Change Documents still be able to go to completion (Production status) if we modify the landscape from the time the Change Document is In Development to the time it is moved to Production?
1. Normal Correction (In Development) Development (ECC 5.0) -> Quality (ECC 5.0) -> Production (ECC 5.0)
2. Landscape is changed to Development (ECC 6.0) -> Quality (ECC 6.0) -> Production (ECC 5.0)
3. Normal Correction moved to To Be Tested -> Consolidated -> Production
Will the Normal Correction be in error because the landscape changed for the iBASE?
Are there any other lessons learned that anyone has experienced with Change Request Management or Implementation during and after an upgrade?
Thank You,
Carlen
Edited by: Carlen Yuen on Jan 13, 2009 1:50 AM
Edited by: Carlen Yuen on Jan 13, 2009 1:51 AM

Thanks Subhashini!
We had issues updating the Task List in the past. After we update the landscape and refresh the project and update the Task List, do you foresee any other problems?
Are there any additional items we should look out for? For example, we understand it is a requirement to release all transports prior to beginning the upgrade. However, since the release of the transport locks the change into the cycle for the next production move, this will present a problem if the change is not yet ready to be moved into Production. Do you have any further insight to any additional issues such as this?
Thanks again!
Carlen

What do I do with F-Secure Freedome when upgrading to Windows 10?

QuestionWhat do I do with F-Secure Freedome when upgrading to Windows 10?
AnswerWhen upgrading your operating system from Windows 7, 8, or 8.1 to Windows 10, you can choose to:
Keep your programs and data through the Windows 10 upgrade (Recommended)
If you choose to upgrade to Windows 10 whilst keeping your programs and data, the Freedome application does not get removed and continues to work normally after the upgrade.
Make a fresh (clean) Windows 10 installation
If you choose to make a fresh (clean) Windows 10 installation, you will need to reinstall Freedome after the Windows 10 upgrade. Do note that this method of upgrade requires you to type in a new subscription code as every installation of Freedome uses one of your available subscriptions.
Note: If you have had an expired trial subscription of Freedome on your computer before the Windows upgrade, it will remain expired after Windows has been upgraded. This applies to both the Windows upgrade methods mentioned above.

Thanks but the tool only works if you have one working windows installation and it's designed for mult-boot systems. I don't have a multi-boot system and when the Windows 10 upgrade fails there is no active working Windows install to turn to. The partition gets corrupted and has a "RAW" status until you run chkdsk with gets it back to "NTFS" status but it won't boot. My only two options at this point is to restore back to an image backup or install Windows 7 all over again. I'm just going to give up on this HP laptop, to me it's just not compatible with running this upgrade, so unless someone else has any other ideas this attempt to upgrade is over. Thanks again

Error when upgrading arch while issueing pacman -Syu [SOLVED]

bash-3.2# pacman -Syu
:: Synchronizing package databases...
core is up to date
extra is up to date
community 358.3K 13.3K/s 00:00:27 [#####################] 100%
kdemod-legacy is up to date
eee is up to date
:: Starting full system upgrade...
resolving dependencies...
warning: dependency cycle detected:
warning: bash will be installed before its glibc dependency
looking for inter-conflicts...
Targets (98): bash-3.2.039-3 kernel-headers-2.6.26.3-1 tzdata-2008h-1
glibc-2.8-3 alsa-lib-1.0.17a-2 module-init-tools-3.4-1
kernel26-2.6.27.4-1 atl2-2.0.5-2 texinfo-4.13a-1 m4-1.4.12-1
autoconf-2.63-1 binutils-2.18-9 bridge-utils-1.4-2
bzip2-1.0.5-3 openssl-0.9.8i-1 run-parts-2.30-1
ca-certificates-20080809-4 cracklib-2.8.13-1
e2fsprogs-1.41.3-2 libgcrypt-1.4.3-2 popt-1.14-1
cryptsetup-1.0.6-2 dhcpcd-4.0.2-2 dialog-1.1_20080819-1
dnsutils-9.5.0.P2-1 ed-1.1-2 filesystem-2008.07-1
fakeroot-1.10.1-1 file-4.26-1 flex-2.5.35-1 fuse-2.7.4-1
gcc-libs-4.3.2-1 gmp-4.2.4-1.1 mpfr-2.3.2-2 gcc-4.3.2-1
gettext-0.17-2 gpm-1.20.5-2 grub-0.97-13 hdparm-8.9-1
hwdetect-0.9.1-2 ifenslave-1.1.0-4 util-linux-ng-2.14-1
udev-130-1 initscripts-2008.09-2 iproute-2.6.25-1
iptables-1.4.2-1 iputils-20071127-2
iwlwifi-3945-ucode-15.28.2.8-1 iwlwifi-4965-ucode-228.57.2.21-1
jfsutils-1.1.13-1 klibc-1.5.14-1 klibc-extras-2.5-1
klibc-kbd-1.15.20080312-7 klibc-module-init-tools-3.4-2
klibc-udev-130-1 libevent-1.4.8-2 libsasl-2.1.22-7
libtool-2.2.6a-1 links-2.2-2 linux-atm-2.5.0-1
madwifi-utils-0.9.4.3844-1 madwifi-0.9.4.3844-2
man-pages-3.11-1 mdadm-2.6.7-1 mlocate-0.21-1 nano-2.0.9-1
ndiswrapper-utils-1.53-1 ndiswrapper-1.53-2 net-snmp-5.4.2.1-1
netcfg-2.1.2-1 netkit-telnet-0.17-8 nfsidmap-0.21-2
nfs-utils-1.1.3-2 ntfs-3g-1.5012-1 openssh-5.1p1-1
openvpn-2.0.9-4 pciutils-3.0.2-1 pcmciautils-015-2
perl-5.10.0-4 pptpclient-1.7.2-1 procinfo-19-3 procps-3.2.7-5
psmisc-22.6-2 python-2.6-2 rp-pppoe-3.10-1 rt2500-1.1.0_B4-25
rt2x00-rt61-fw-1.2-3 rt2x00-rt71w-fw-1.8-3 sdparm-1.03-1
shadow-4.1.2.1-2 sudo-1.6.9p17-1 tiacx-20080210-7 vi-7.2.25-1
wget-1.11.4-1 which-2.20-1 wlan-ng26-utils-0.2.9-1
wlan-ng26-0.2.9-2 xfsprogs-2.10.1-1
Total Download Size: 0.00 MB
Total Installed Size: 471.73 MB
Proceed with installation? [Y/n] y
checking package integrity...
(98/98) checking for file conflicts [#####################] 100%
error: could not prepare transaction
error: failed to commit transaction (conflicting files)
klibc: /usr/lib/klibc/include/asm/Kbuild exists in filesystem
klibc: /usr/lib/klibc/include/asm/a.out.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/acpi.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/agp.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/alternative-asm.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/alternative.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/apic.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/apicdef.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/arch_hooks.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/asm-offsets.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/atomic.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/atomic_32.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/atomic_64.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/auxvec.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/bitops.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/boot.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/bootparam.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/bug.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/bugs.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/byteorder.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/cache.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/cacheflush.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/calgary.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/calling.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/checksum.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/checksum_32.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/checksum_64.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/cmpxchg.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/cmpxchg_32.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/cmpxchg_64.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/compat.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/cpu.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/cpufeature.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/cputime.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/current.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/current_32.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/current_64.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/debugreg.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/delay.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/desc.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/desc_defs.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/device.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/div64.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/dma-mapping.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/dma.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/dmi.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/dwarf2.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/dwarf2_32.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/dwarf2_64.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/e820.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/e820_32.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/e820_64.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/edac.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/elf.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/emergency-restart.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/errno.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/fb.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/fcntl.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/fixmap.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/fixmap_32.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/fixmap_64.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/floppy.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/frame.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/futex.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/gart.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/genapic.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/genapic_32.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/genapic_64.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/geode.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/hardirq.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/hardirq_32.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/hardirq_64.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/highmem.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/hpet.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/hw_irq.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/hw_irq_32.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/hw_irq_64.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/hypertransport.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/i387.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/i8253.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/i8259.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/ia32.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/ia32_unistd.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/ide.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/idle.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/intel_arch_perfmon.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/io.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/io_32.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/io_64.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/io_apic.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/ioctl.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/ioctls.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/iommu.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/ipcbuf.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/ipi.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/irq.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/irq_32.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/irq_64.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/irq_regs.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/irq_regs_32.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/irq_regs_64.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/irqflags.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/ist.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/k8.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/kdebug.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/kexec.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/kmap_types.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/kprobes.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/ldt.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/lguest.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/lguest_hcall.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/linkage.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/local.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-bigsmp/mach_apic.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-bigsmp/mach_apicdef.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-bigsmp/mach_ipi.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-bigsmp/mach_mpspec.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-default/apm.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-default/do_timer.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-default/entry_arch.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-default/irq_vectors.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-default/irq_vectors_limits.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-default/mach_apic.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-default/mach_apicdef.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-default/mach_ipi.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-default/mach_mpparse.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-default/mach_mpspec.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-default/mach_timer.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-default/mach_traps.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-default/mach_wakecpu.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-default/pci-functions.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-default/setup_arch.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-default/smpboot_hooks.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-es7000/mach_apic.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-es7000/mach_apicdef.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-es7000/mach_ipi.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-es7000/mach_mpparse.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-es7000/mach_mpspec.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-es7000/mach_wakecpu.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-generic/irq_vectors_limits.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-generic/mach_apic.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-generic/mach_apicdef.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-generic/mach_ipi.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-generic/mach_mpparse.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-generic/mach_mpspec.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-numaq/mach_apic.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-numaq/mach_apicdef.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-numaq/mach_ipi.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-numaq/mach_mpparse.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-numaq/mach_mpspec.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-numaq/mach_wakecpu.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-summit/irq_vectors_limits.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-summit/mach_apic.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-summit/mach_apicdef.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-summit/mach_ipi.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-summit/mach_mpparse.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-summit/mach_mpspec.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-visws/cobalt.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-visws/entry_arch.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-visws/irq_vectors.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-visws/lithium.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-visws/mach_apic.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-visws/mach_apicdef.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-visws/piix4.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-visws/setup_arch.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-visws/smpboot_hooks.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-voyager/do_timer.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-voyager/entry_arch.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-voyager/irq_vectors.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-voyager/setup_arch.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/math_emu.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mc146818rtc.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mca.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mca_dma.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mce.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mman.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mmu.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mmu_context.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mmu_context_32.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mmu_context_64.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mmx.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mmzone.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mmzone_32.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mmzone_64.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/module.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mpspec.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mpspec_def.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/msgbuf.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/msidef.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/msr-index.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/msr.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mtrr.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mutex.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mutex_32.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mutex_64.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/namei.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/nmi.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/numa.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/numa_32.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/numa_64.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/numaq.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/page.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/page_32.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/page_64.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/param.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/paravirt.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/parport.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/pci-direct.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/pci.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/pci_32.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/pci_64.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/pda.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/percpu.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/pgalloc.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/pgtable-2level-defs.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/pgtable-2level.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/pgtable-3level-defs.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/pgtable-3level.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/pgtable.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/pgtable_32.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/pgtable_64.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/poll.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/posix_types.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/posix_types_32.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/posix_types_64.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/prctl.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/processor-cyrix.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/processor-flags.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/processor.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/proto.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/ptrace-abi.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/ptrace.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/reboot.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/reboot_fixups.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/required-features.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/resource.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/resume-trace.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/rio.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/rtc.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/rwlock.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/rwsem.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/scatterlist.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/seccomp.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/seccomp_32.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/seccomp_64.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/sections.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/segment.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/semaphore.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/sembuf.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/serial.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/setup.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/shmbuf.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/shmparam.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/sigcontext.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/sigcontext32.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/siginfo.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/signal.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/smp.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/socket.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/sockios.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/sparsemem.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/spinlock.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/spinlock_types.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/srat.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/stacktrace.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/stat.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/statfs.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/string.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/string_32.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/string_64.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/suspend.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/suspend_32.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/suspend_64.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/swiotlb.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/sync_bitops.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/system.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/system_64.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/tce.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/termbits.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/termios.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/therm_throt.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/thread_info.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/thread_info_32.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/thread_info_64.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/time.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/timer.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/timex.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/tlb.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/tlbflush.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/topology.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/tsc.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/types.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/uaccess.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/uaccess_32.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/uaccess_64.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/ucontext.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/unaligned.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/unistd.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/unistd_32.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/unistd_64.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/unwind.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/user.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/user32.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/user_32.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/user_64.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/vga.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/vgtod.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/vic.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/vm86.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/vmi.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/vmi_time.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/voyager.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/vsyscall.h exists in filesystemI
klibc: /usr/lib/klibc/include/asm/xen/hypercall.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/xen/hypervisor.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/xen/interface.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/xor.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/xor_32.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/xor_64.h exists in filesystem
Errors occurred, no packages were upgraded.
I had this error when upgrading. I'm using arch linux on eeepc with kdemod 3.5
Last edited by kaola_linux (2008-11-04 04:11:36)

robertp wrote:Go to: http://bbs.archlinux.org/viewtopic.php?id=57885
Thank you. That solved my same problem as well.
But on my screen the text scrolled by so fast that i could barely read it and I could not scroll up to read the beginning.
how can I pipe the output so that it does not scroll so fast. i thought this was the "less" command but when i typed:
less pacman -Syu
or
pacman -Syu less
I got errors in syntax. I am a noob coming from 1 year using Ubuntu. I have worked thru many errors to get this far in the install.
The forums where down so I was on my own and had to use trial and error and the beginner wiki. im glad now forums back online because i never woould have figured out this klibc error on my own.

[SOLVED] Which packages are installed as dependencies when upgrading?

Hello,
When upgrading, I'd like to know which packages are upgraded and which ones are installed as new dependencies.
How can I do that?
The problem for me here is that I'd like to know which package is triggering an install of mariadb (which I don't need nor want).
Thanks in advance!
Last edited by lilorox (2014-04-30 07:14:03)

mpan wrote:
This will warn you about which package can't be installed because of mariadb not being installed
pacman --your_usual_options --ignore mariadb
Exactly what I needed
This way I get the entire dependency tree so I know I can blame nepomuk-core.
I knew the mariadb dependency came from KDE (baloo precisely) but I had no idea which package needed it.
$ sudo pacman -Su --ignore mariadb --ignore mariadb-clients
:: Starting full system upgrade...
:: Replace shared-color-profiles with extra/colord? [Y/n]
resolving dependencies...
warning: ignoring package mariadb-5.5.36-1
warning: ignoring package mariadb-clients-5.5.36-1
warning: cannot resolve "mariadb-clients", a dependency of "percona-server"
warning: cannot resolve "mariadb", a dependency of "akonadi"
warning: cannot resolve "akonadi", a dependency of "kdepimlibs"
warning: cannot resolve "kdepimlibs", a dependency of "baloo"
warning: cannot resolve "baloo", a dependency of "nepomuk-core"
:: The following package cannot be upgraded due to unresolvable dependencies:
nepomuk-core
:: Do you want to skip the above package for this upgrade? [y/N]

Error when upgrading to SAP B1 8.82

When upgrading a company database from SAP B1 8.81 PL09 to 8.82 PL03,
Error occurs with the following message.
"Dashboard Packages: The entry already exists in the following table.(ODBC -2035)"
The company already had passed the pretest for upgrading 8.82, but failed in reality during upgrade.
Did anyone have experienced this kind of thing?

Hi.........
I guess this is because of Xcelcius Package activated at Integration Component.
Please try this.
Go to Start> Programs> Integration Framework for SAP B1> Login> Scenarios--> Control and deactivate sap.Xcelcius.
And then try to upgrade.......
Hope this will help you.......
Regards,
Rahul

When upgrading failover pairLast week I had to upgrade ASA5510

Similar Messages

Maybe you are looking for