When uploading dreamwaver error code appears  U44M1P7

when uploading dreamwaver error code appears  U44M1P7. please advise

Hi MartinLoos,
Please attach the Pdapp.log: http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html.
Regards,
Romit Sinha

Similar Messages

  • Error when uploading file : Return code = 6 in LSMW

    Hello All,
    Getting the bleow mentioned error in LSMW.
    Error when uploading file Return code = 6 )
    Is it related to access. please suggest.

    did you define the file in step 7 without any error and allocate in step 8 without any error before? 
    I mean in the same system where you execute the read step.
    Make sure you have the file not open when you execute the read step.

  • Error when uploading file :( Return code = 6 )

    Hello All,
    Getting the bleow mentioned error in LSMW.
    Error when uploading file Return code = 6 )
    Is it related to access. please suggest.

    Hi,
    If the Sy-Subrc is 0 then Success,
             Sy-SUBRC is 4 then failure,
             Sy-SUBRC = 6 then the user might be not access to read the file.
    This is due to authorization issue.

  • Bought Lion online, downloaded, when finished an error message appeared and 3,7GB vanished... Anyone with a similar experience???

    Bought Lion online, downloaded, when finished an error message appeared and 3,7GB vanished... Anyone with a similar experience???

    All I know is that once it is installed it is erased, the Lion Installer is erased from the applications folder.
    You won't have to pay for it again if you have to download again. Remember to move it out of the applications folder, then you can trash it when you are ready or even burn a startup DVD.
    My knowledge comes from two e-books you can get here
    http://www.takecontrolbooks.com/lion-upgrading
    and the one about using lion.
    Good luck

  • How do I export from IMovie when "not enough room in Heap Zone" error code appears?   How can I correct,  what to Do.."export movie" insteand of Media browser or IDVD?  Finalize movie?  I want to burn it to DVD!

    How do I export from IMovie to Wondershare Creator to Make DVD and share hour long movie when I am unable to "publish" movie on Media Browser of IDVD because the error code "not enough room in heap Zone/ " appears and function is aborted. 
    I shortened the movie, that is no cure...Correcting date info on clips does not pertain.  Why would Apple throw roadblocks in your way without solving problems they create?
    A techie made an appointment on the phone and was totally incapable of addressing the problem.
    What is a heap zone????

    Instead of Share to Media Browser, what happens if you try Share Menu > Export Movie... (choose Large size) and save it to the Desktop?
    If that fails try Share Menu > Export using QuickTime...
    Then pick Movie to QuickTime Movie, then click on Options... which is just to the right of Export
    Under the Video section click on Settings...
    Then in the pulldown menu at the top, titled Compression Type: Choose Apple Intermediate Codec. Then click OK. And click OK again, and save it to the desktop. Once the .mov file is created, you can import that into iDVD and most likely it will work in Wondershare Creator if you prefer to use that instead.

  • "Unknown error" (with no error code) appears when trying to buy music on iPhone 4

    I am attempting to buy music on the iTunes app on my iPhone 4 and a message appears saying "unknown error." With the options of cancel or retry. There is no error code or anything. I'm not sure how to fix this problem. My iPhone is complete updated.

    Try here since error 14 is one of the listed errors:
    http://support.apple.com/kb/TS1275
    (Update and restore alert messages on iPhone, iPad, and iPod touch)

  • LSMW: "Error in Uploading File" error code 6

    Hi All,
    I have created a simple LSMW project for deletion of Purchase Requisition in Development server. It is working as per the requirement there. But when I tried to Export the project and import it into our Production Server, system gives "Error in Uploading file".
    Hence, I recreated the project in Production system. Here again when I reached the step "Read Data" the same error occured. I wanted system to read the Purchase requisition numbers from a text file which i have already mapped in the steps previous to " Read Data".
    Also, system says "Error Code 6"
    Can anyone please highlight possible causes of this error message?
    Regards,
    Vishal Data

    Hi,
    first you have to check TEXT file data - why because you are tested in Development server with test data , but that same test date not available in Production server na
    prepare PR numbers from Production server -convert into Txt. format
    while running LSMW - close all Excel file and Text file ,
    at the time of Import and Export - system will start Specify Files- item - that time you will give Production data Text file then Upload
    I think now you can't face any error
    Mahesh

  • Build error when using custom error codes

    When I try to build my application using custom error codes I receive the following error:
    Error 1 occurred at Copy in AB_Engine_Copy_Error_Files.vi->AB_Application.lvclass:Copy_Error_Files.vi->AB_Application.lvclass:Copy_Files.vi->AB_Build.lvclass:Build.vi->AB_EXE.lvclass:Build.vi->AB_Engine_Build.vi->AB_Build_Invoke.vi->AB_Build_Invoke.vi.ProxyCaller
    Possible reason(s):
    LabVIEW:  An input parameter is invalid. For example if the input is a path, the path might contain a character not allowed by the OS such as ? or @.
    =========================
    NI-488:  Command requires GPIB Controller to be Controller-In-Charge.
    C:\Program Files\National Instruments\LabVIEW 8.5\user.lib\errors\BPMS-errors.txt
    This only occurs the first time I attempt to build my application. If I build again immediately after receiving the error, everything works fine. My custom error codes were created using the provided editor, and I have included the file in my project. I have also checked the "Copy error codes" box in the advanced build specification settings.

    Hi Donovan,
    The attached project is giving me the error previously discussed. Thanks for your help.
    Attachments:
    BuildError.zip ‏10 KB

  • How do you fix it when you get error Code:  Too many Activations?

    I am getting the following error code when I try to transfer books to my Sony PRS600 Reader using Adobe Digital Editions.  My Operating System is Windows XP.   Please help.  I have called and got representatives who did not understand or we had a problem with the language.  I have tried the "Self Help" steps and they don't work.  I just need to have the "ReActivate" so I can continue to download and transfer books.  The customer service system for this problem is terrible.
    E_ACT_TOO_MANY_ACTIVATIONS http://adeactivate.adobe.com/adept/Activate 410:12000:8390 urn:uuid:22aea7ea-cbf3-45e3-ba16-bd9b929291fd

    Support for ADE is only provided through the web portal - available at http://www.adobe.com/support/digitaleditions (click on submit a web case)

  • TS4522 What is the problem when I get error code 0 when trying to burn a DVD.  It stops around 60-some %.

    I have tried twice to burn a DVD, and both times I get error code 0 at about 60-some % of the transcoding.  I haven't had any trouble burning DVDs before now.

    I had a friend with similar problem, not sure of cause. Happened when sharing to Apple device as well.
    Apple said to delete all files in Render folder. We did not try that as-
    Problem changed slightly for us, in that Share to 'Apple device 720' got to 50% and pretended to have completed its operation, but no file found in Project Share folder.
    We found then, if the timeline clips where highlighted it would share, where previously it had repeatedly failed.
    Hope that helps

  • IMovie: Share - Media Browser when finishing receive: Error code = -2125

    After I completed 6 hrs of video preparation I received the following error:
    *Unable to prepare project for publishing. The project could not be prepared for publishing because an error occurred. (Error code = -2125)*
    The video was made from 4 separate DVD cd's from camcorder. I used Share - Media Browser - Large to publish and after 6 full hours and 100% is when this error comes up. I have confirmed that I have plenty of Hard Drive space on all my drives, so not sure what the problem is... Any help with this would be greatly appreciated.
    Thank you,
    Kevin

    The easiest way is to go to the Project Library view. Then, with the Project selected, click FILE/DUPLICATE PROJECT. Give this new project a name, like Project Name Part 1. Then do this again and give it a name like Project Name Part 2. Leave your original project intact. Go to Part 1 and delete everything in the second half.
    Open Part 2, and delete all the clips in the first half.

  • XML-Upload when uploading german tariff codes

    Dear all
    I am trying to upload Import codes from an XML file into GTS. Transaction is /SAPSLL/LLNS_UPL101
    Doing so, I am receiving the following error message:
    >>> The length of a navigation group is incorrect. Message no. /SAPSLL/CORE_LLNS048
    Diagnosis
    During the upload, the system checks whether the individual structure levels in the number scheme have the same length as the structure levels of the corresponding number systems in the system. If the length of the structure levels is not identical, processing is suspended. <<<
    I checked for the settings in:   SAP Customizing Implementation Guide > SAP Global Trade Services > General Settings > Numbering Schemes > Define Numbering Scheme for Tariff Code Numbers
    But to me, everything seems to be correct. Anyone have an idea what else might be wrong?
    This would be highly appreciated. Thank you very much in advance!!!!

    Hi Tzunami,
    The program is very strict about comparing the levels and lengths.  Usually it gets the right answer, and you should check carefully.  You don't mention whether the upload usually works correctly, or if this run is your first one.  That could make it easier to diagnose.
    The error code you mention is only produced at one point in the program, and there's an internal variable that can affect how the code works.  If you really can't find any other problem, and can do the upload in a test system, it might be worth changing that variable, just to see if there's a difference.  From the selection screen, run the program in debug mode, and set variable P_ABSLEN to 'X' (true).  Then continue, and see if it works differently.
    Regards,
    Dave

  • Error Message When Emptying Trash - (error code -8003)

    I have recently had to erase and re-install my hard drive a couple of times (under instruction from Apple) and now I have previous hard drives in my trash which I am wanting to erase (along with other stuff). However I have tried to empty the trash the usual way to no success, I have tried using the 'trash it' app again to no success and I have even opened up Terminal and typed in: sudo rm -rf ~/.Trash. (This I copied and pasted from another users issue for an error code -36. with their trash)
    MY error message however reads as follows:
    The Operation can't be completed because an unexpected error occurred (error code -8003).
    Can anyone help please?

    Choosy Bernie wrote:
    (error code -8003)
    AFAIK there is no error such error code. Methinks your Mac is delusional.
    Have you tried this Terminal command?
    sudo rm .Trash/*
    Do you have another drive or Windows installed? If you have Windows installed boot from your Windows partition and run Chkdsk utility.
    -mj

  • I am trying to access a website for my business and keep getting this error message when logging in: (Error code: ssl_error_access_denied_alert). Help!

    How do I fix this error code? Everything that I have searched and tried to do did not help. Tech support is unsure how to handle this error message either for this something they have not really had to deal with. Any insights would be greatly appreciated on how to handle this error code and clear it out. Thank you!

    Did you try to disable TLS by setting both prefs to 0 or only use TLS 1.0 (both prefs 1)
    *http://kb.mozillazine.org/security.tls.version.*
    0 means SSL 3.0, 1 means TLS 1.0, 2 means TLS 1.1, etc.

  • How do I dump trash when I get error code -8003?

    I'm having difficulty in dumping my trash no matter what I do. It comes up with an (error code -8003). I need a way to override this if possible... any ideas?

    Might give TrashIt a try.
    In addition to the X Lab article mentioned above there's this apple article:
    You can't empty the Trash or move a file to the Trash
    And with respect to error -8003 there's already this thread in these discussions:
    Empty Trash error -8003

Maybe you are looking for