When Uploading Podcast, Getting a Connection Interrupted Message

Hey everyone,
I'm trying to upload my podcast from iweb to itunes (as I usually do anyway) and I am getting this error message which I've never seen before;
Our connection was interrupted to this feed, possibly due to a timeout. The host did not accept the connection within timeout of 10000 ms.
Does anyone have any idea what this could be? I've never had an issue before, but this is the first time since my updated leopard install and thus new iweb and itunes.
I have been getting the message all day so it's not an issue that is only there for a few minutes.
Thanks
T

I am getting the same exact error message. Perhaps there is an issue with the itunes servers tonight. I am going to try again tomorrow.
From what I can see, the feed is working fine at:
http://www.beccalori.com/beccalori/podcast/seo-expert-podcast.xml

Similar Messages

  • Keep getting "Server connection interrupted" message

    I went down in the basement with my Macbook to do some work on my Dell desktop and I keep getting the "Server connection interrupted" with a disconnect button.

    Both my iPad 1 and 3 have done this, to a point that all websites were no longer accessible!!! Yet, my iMac worked like a charm, and our Ooma VOiP box in WiFi mode worked fine. I tried lots of different things, without any of them working.
    I searched the whole web, not just these discussions, and didn't find any solution at all.
    So I just reset my Airport Extreme to factory defaults, and everything is back to normal now! Sheesh! Hope this helps a lot of people!

  • What is wrong when I keep getting "Secure Connection Failed" message?

    Why am I getting the msg "Secure Connection Failed" on most sites I used to be able to access before power outage?

    Rename (or delete) secmod.db (secmod.db.old) and maybe also cert8.db (cert8.db.old) in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder] in case there is a problem with the files.
    The file ''cert8.db'' stores your user certificates, so if you have user certificates then you may want to export them now and import them after having removed cert8.db.
    See Tools > Options > Advanced > Encryption: Certificates: View Certificates
    If that works then you can delete the renamed files or undo the changes if you want to revert the process.

  • I am getting a "connection timeout" message when trying to access my Airport Extreme with various laptops, Play Station 3 and Wii. My Airport Extreme is about a month old; it was working fine until about a week ago. C

    I am getting a "connection timeout" message when trying to access my Airport Extreme with various laptops, Play Station 3 and Wii. My Airport Extreme is about a month old; it was working fine until about a week ago. Suddenly, the "timeout" is not allowing me to connect to my wireless network.

    It could be that there's a new source of interference.
    Use the advice in the second message of this thread to investigate the signal and noise levels that each client sees:
    http://discussions.apple.com/thread.jspa?threadID=2347845&start=1
    By the way, you've been misled by the poor field labeling into trying to type your entire message into the subject field, instead of putting a one-line topic description there.

  • I've tried to install flash player several different times ans each time i get a connection error message.It downloads fine and when i run the file to start install,it installs up to 5% and then i get the connection error message.Can someone please help m

    I've tried to download the flash player several different times and each time i get a connection error message.It downloads fine and when i run the file to start install, it installs up to 5% and then i get the connection error message. I've tried disabling my antivirus software, closing my browser for install and nothing.Can someone please help me? I'm using Firefox.

    Hi!
    I had the exact same issue, being on a mac. If you are on a mac and the connection error message occurs, then use this link http://fpdownload.macromedia.com/pub/flashplayer/latest/help/install_flash_player_osx.dmg
    It allows you to download it offline, which is what I used.
    Hope I was help!
    -Haroon

  • When I attempt to export/import via FTP for OOTP 11 I get a connectivity error message

    I participate in OOTP ver 11 fantasy baseball leagues which uses FTP to export and import league databases. For some reason, I have been unable to import/export using FTP. Each time I attempt to export/import I get a connectivity error message stating "am unable to connect". I have not had this problem with the previous versions of OOTP Fantasy Baseball. Plus, when I first upgraded to OOTP 11, I did not have this problem.
    == This happened ==
    Every time Firefox opened
    == I think it started after a firefox update ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.648; MS-RTC LM 8; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

    If there are problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
    Download a new copy of the Firefox program and save the disk image (dmg) file to the desktop
    *Firefox 6.0.x: http://www.mozilla.com/en-US/firefox/all.html
    *Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html
    * Trash the current Firefox application to do a clean (re-)install
    * Install the new version that you have downloaded
    Your profile data is stored elsewhere in the Firefox Profile Folder, so you won't lose your bookmarks and other personal data.
    * http://kb.mozillazine.org/Profile_folder_-_Firefox

  • TS3988 I can log into my iCloud account on my iphone but when I try to log in on my pc I keep getting a connection error message.  Any ideas?

    I can log into my iCloud account on my iphone but when I try to log in on my pc I keep getting a connection error message.  Any ideas?

    Same problem. I can see the itunes store so not a problem with windows firewall. The account is active on my iphone so i know i am not locked out. I can connect the PC to my iphone so i know itunes is working ok. It is just logging into itunes on this pc which doesn't work. Only thing I can think of is that the email address I use for my apple id has been offline for a while and is working again now, I'm wondering whether this has been the case for others who are having this issue?

  • Can not connect to the App store I keep getting a connection failure message. Mail and Safari are working fine. Also Iphoto wont update to newer version and itunes does open up properly.

    I have recently bought a new imac. Imported all my files etc. from my G5 using Timemachine.
    Iphoto requires updating but wont!
    itunes wont open up properly the text is wrong!!
    I keep getting a connection failure message when trying to visit the App store.
    Safari and Mail are working fine.
    My Apple Id is also fine as it works with my ipad.
    Any suggestions?

    Hello Ben, see if this might be it...
    Anonymous
    Post subject: NSURLErrorDomain error -1100 in OS X 10.8
    If you check for software updates using the App Store in OS X 10.8 and get "NSURLErrorDomain error -1100" the problem may be with your Software Update preferences. This is particularly likely if you were using a custom Apple Software Update server. To solve the problem, quit the App Store, move the following two files (if present) to the trash, restart, and only then rerun App Store updates:
    /Library/Preferences/com.apple.SoftwareUpdate.plist
    /Library/Preferences/com.apple.SoftwareUpdate.plist.lockfile
    http://x704.net/bbs/viewtopic.php?f=12&t=6130

  • My Time Capsule hard drive shows up in Finder, but I can't access the disk.  I get a connection failed message.

    I can not access my Time Capsule from the Finder.  This was working, but on 12/25/2011, the disk can no longer be accessed.  It shows up in the Finder, but when I try to connect, I get a "Connection Failed" message.  If I cycle the power, it works for a little while and then fails again.

    hello
    No i'm connect via ethernet (cable) with TC. The problem is when I try to connect to my TC when I'm away from home like for ex. using a free wi fi spot!! Well in this case the icon appear on my Finder but refuse to connet!! ( connection faild ).

  • Disable "server connection interrupted" message

    Does anyone know if there is a way to disable the "server connection interrupted" message that appears when a connected server goes down. This message serves no purpose. It presents the user with the choice to either "ignore" or "disconnect", but choosing either one causes the disk to unmount. A message box is unnecessary if both of the choices it presents have the same outcome. I'd be much happier if the disk just automatically unmounted in the background.
    thanks

    I'd like to disable this dialog as well. I know the server connections are interrupted. That happens when I pull the network cable out. In my case it makes absolutely no difference whether I hit "Ignore" or "Disconnect". You're a Mac, just do what you have to and don't bug me about it!

  • When do we get "asap mode disabled" message in IAP?

    Q: When do we get "asap mode disabled" message in IAP?
    A:  
    When the "Autojoin mode" is disabled on the master and when the new IAPs which are trying to join this cluster unable to join and will try to come up as master by throwing this message  "asap mode disabled".
    Solution: Enable "Auto join" mode or manually add the other IAP MAC address on the master such that those IAPs will come up as slave.
    Console Output:
    =============
            <<<<<       Welcome to the Access Point     >>>>>
    asap mode disabled :.
    process `snmpd' is using obsolete setsockopt SO_BSDCOMPAT
    asap mode disabled :.
    asap mode disabled :.
    asap mode disabled :.
    asap_send_elected_master: sent successfully
    wait for stm to initialize over
    asap_send_elected_master: sent successfully

    Assuming there is a legal issue, I hope this thread does not get deleted.
    Regarding Audacity - it will not display the drop down menu as the driver itself disabled the stereo-mix.  Re-enabing it using this patch will help.
    However, I found the solution on a thread: http://forum.thinkpads.com/viewtopic.php?t=52527&start=60&sid=a136c428c5a38c58b573f3fa01c35d67
    But basically, download the SoundMax driver from lenovo's website and extract it somewhere.  Then open up ADIHDAUD.INF located in SMAXWDM folder in the driver folder.
    Find the line HKR,AD1984\\Disable, OutR, 1, 01 ;; Disable Stereo Mix Capture Node
    Change the "01" to 00 and save it
    Run "setup" and select "uninstall" existing driver - reboot
    Run "setup" and select "install" new driver - ignore the Windows XP auto install setting and ignore the "non certified" driver warning - reboot
    Go to start menu > run > type: "regedit" [enter] (without quotes)
    Click on "edit > search" and look for AD1984.
    For each registry key/folder of AD1984, find the subfolder/key that says MicBP and OutR and change their associated binary values from 01 to 00.  For some people, re-installing the driver in this fashion already produces a 00 while for others, the change must be made manually.
    Reboot
    Windows may give you an error that the SoundMax driver needs to be re-installed - this is NOT true.  You need to only re-install the Windows XP hotfix to re-enable the universal audio architecture.  This hotfix is available on the lenovo website here: http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-68974
    I do not know if this works for Windows Vista but it should would be happy to see if someone can try.  Otherwise, XP users should be good to go!
    Message Edited by singularity2006 on 02-13-2008 09:12 AM
    MOD edit - converted to clickable link.
    Message Edited by Mark_Lenovo on 04-17-2008 01:04 PM
    T61_Wide | Model No. 7662 - CTO
    Core 2 Duo T7250 | 2GB OCZ DDR2-800
    82566MM Gigabit | 4965AGN Centrino Pro

  • Why does not connect properly macpro my motorola bluetooth headphones S10? I get a connection error message and there is no sound. (I want to use headphones to listen to music via bluetooth from my macpro)

    Why does not connect properly macpro my motorola bluetooth headphones S10?     I get a connection error message and there is no sound.                         (I want to use headphones to listen to music via bluetooth from my macpro)   
    the s10 works perfectly on my ipod touch 4g. 

    this is   
    ERROR HAS OCCURRED Bluetooth audio.
    It failed to establish connection with their
    audio device. make sure it is on and
    in the range. you may need to restart the
      audio section of the program you were using
    STOP USING THE HEADSET WITH MICROPHONE.
    ALSO HAVE A MOTOROLA BLUETOOTH SPEAKERS WHICH EQ5 work seamlessly with the Mac

  • Firefox will not go to a new website on the first time that I click a link. I get a connection problem message firt but then when I click on "try again" it works.

    I get a connection error every time.

    What is the message to the left of the Allow button? Hopefully with that information we can advise on changes to your settings to resolve the issue.
    You also could supply a URL of a site that has this problem, assuming we don't need an account to check it out.

  • Possible to disable "server connection interrupted" message?

    I have a mac mini (running lion) connected to the TV as a media center with a Time Capsule 4gen. as a router with all my media on. Connected to the Mac mini via cable. The problem is that I verry often get the message "server connection interrupted" on my mac mini. it could be in the middle of a movie playing from the TC and it does not stop playing but the message pops up (internet and wireless also works normal when this happens), witch is really annoying! I then have to do share screen on it from my macbook and press ignore. So my question is; does anyone know what could be the reason for this and have any ideas i coud try to fix it? if not does anyone know if it is possible to disable the message in question or make it "autoignore" it or anything?

    Not at the moment.. it is a bug.
    https://discussions.apple.com/message/17118907#17118907

  • Problems when trying to get a connection

    Hi, i'm doing some tests with Hibernate but i'm getting an error when Hibernate tries to get a connection from a pooled datasource.
    Here is my session factory configuration:
      <session-factory>
        <property name="transaction.factory_class">org.hibernate.transaction.JTATransactionFactory</property>
        <property name="connection.datasource">jdbc/CORE_DS</property>
        <property name="dialect">org.hibernate.dialect.SQLServerDialect</property>       
      </session-factory>
    I created a jdbc2.0 datasource called jdbc/CORE_DS
    This is the error i'm getting:
         java.lang.ExceptionInInitializerError
         at com.sap.engine.services.ejb.exceptions.BaseRemoteException.writeReplace(BaseRemoteException.java:276)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at java.io.ObjectStreamClass.invokeWriteReplace(ObjectStreamClass.java:896)
         at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1011)
         at java.io.ObjectOutputStream.writeObject(ObjectOutputStream.java:278)
         at com.sap.engine.services.rmi_p4.DispatchImpl.throwException(DispatchImpl.java:135)
         at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:296)
         at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:183)
         at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:119)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37)
         at com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:162)
    Caused by: java.lang.ExceptionInInitializerError
         at test.util.HibernateUtil.<clinit>(HibernateUtil.java:22)
         at test.vo.EventManager.listEvents(EventManager.java:41)
         at test.ejb.EventHandlerBean.getEvents(EventHandlerBean.java:54)
         at test.ejb.EventHandlerObjectImpl0.getEvents(EventHandlerObjectImpl0.java:204)
         at test.ejb.EventHandlerObjectImpl0p4_Skel.dispatch(EventHandlerObjectImpl0p4_Skel.java:119)
         at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:294)
         ... 8 more
    Caused by: java.lang.NullPointerException
         at com.sap.engine.services.dbpool.spi.CPManagedConnectionFactoryImpl.createManagedConnection(CPManagedConnectionFactoryImpl.java:145)
         at com.sap.engine.services.connector.jca.ConnectionHashSet.match(ConnectionHashSet.java:312)
         at com.sap.engine.services.connector.jca.ConnectionManagerImpl.allocateConnection(ConnectionManagerImpl.java:231)
         at com.sap.engine.services.dbpool.cci.ConnectionFactoryImpl.getConnection(ConnectionFactoryImpl.java:51)
         at org.hibernate.connection.DatasourceConnectionProvider.getConnection(DatasourceConnectionProvider.java:59)
         at org.hibernate.cfg.SettingsFactory.buildSettings(SettingsFactory.java:72)
         at org.hibernate.cfg.Configuration.buildSettings(Configuration.java:1463)
         at org.hibernate.cfg.Configuration.buildSessionFactory(Configuration.java:1004)
         at test.util.HibernateUtil.<clinit>(HibernateUtil.java:18)
         ... 13 more
    any ideas?
    Thanks,
    Juan Manuel
    Message was edited by: Juan Sanmarco

    Hi we are having a similar issue, could you please specify how you solved this?
    Thanks
    regards
    Vincenzo

Maybe you are looking for

  • My application doesn't see my properties?

    Hi, I'using JDK 1.4.2_04 and it's JWS features, on a Windows 2000 platform. In my JNLP file, I specify properties that I should then find in the System.getProperties() set : <?xml version="1.0" encoding="UTF-8"?> <jnlp spec="1.0+" codebase="$$host/JW

  • How to update my xperia ray to lollipop

    My phone is very hanged . How to update my phone to lollipop 5.0

  • Project Server Creating database views

    Hi All, We are using project server 2013. We need to create some database views to generate some complex report, what is the best way to create. I think if we create any custom views inside the project server databse, will be removed while applying t

  • Different behaviours when exporting pdf

    hi, i'm facing a strange behaviour when trying to export a pdf that is generated from db. i want to make pdfs available via dialog box. i set disposition to attachment in the response header. whereas FireFox shows the dialog box (as expected), IE ren

  • To restrict single job  for a single quote

    Hi All, We have a requirement where we need to restrict single job for a single quote. Can anybody help me on this. Reward points are assured. Any quick response will be highly appreciated. Best Regards Bhagat.